KT4 Ultra Disable the Onboard Sound?

Hello I just purchased a KT4 Ultra board and need to disable the onboard sound so I can install my Audigy Platnium sound card. I do not see any documented jumpers or provisions in the bios. Could someone explain how to do this, and if your saying it exist in the bios please include the bios header it is under. Thankyou.

JoJoMoJo,
I since you have a KT4 and you posted in the nVidia/AMD/SiS Motherboard Forum, I moved the thread to Via forum for you.
Take Care,
Richard

Similar Messages

How do I disable the onboard sound in CMOS?

I have a KT4 Ultra, and I want to disable the onboard sound so I can use my own Soundblaster card. How do I do this? I've looked through the BIOS, and nothing seems to stand out. Do I have to do it on the board itself?

I just downloaded the KT4 Ultra book and will run you thorugh what you have to do....
Your board has "C-Media 8738MX 6-channel audio with SPDIF out" so you will have to disabled it in Bios if you want to use a PCI sound card.
1. Reboot your PC and press "DELETE" to enter Bios.
2. Select "Integrated Peripherals"
3. Scroll down until you see "OnBoard PCI Controller" and then "Audio Controller". (It's last on the list!).
4. Select "DISABLED"
5. Select "SAVE & EXIT SETUP".
6. Turn off your PC.
7. Put your new PCI Sound Card in...I recommend PCI Slots 2-5. Try to keep PCI 1 and 6 clear....
8. Reboot. Your OS will go into "FOUND NEW HARDWARE". Wait until it's done.
9. Put your new PCI Sound card driver CD in and load the new drivers....REBOOT.

How do I disable the onboard Sound card in BIOS on the Equium A200

I am using a Creative Sound Blaster external soundcard but the recording level is very low and have been advised by Creative to disable the onboard sound card in BIOS but there is no option to do this. Can anyone help ?

Hi
You cannot disable it in the BIOS.
If you want to disable the sound card you can do this in the device manager!
cheers

How do I disable the onboard sound card in BIOS on the Equium A200 PSAE2 ?

I am using a Creative Sound Blaster external soundcard but the recording level is very low and have been advised by Creative to disable the onboard sound card in BIOS but there is no option to do this. Can anyone help ?

Do not post twice!
Follow this
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99828&

I'm at a loss with the onboard sound

I can't get my 6 5.1 speakers to work on mt KT4 Ultra board, so I'm considering putting my Sound Blaster back in and disabling the onboard sound. What kind of a performance hit will I take?
I can get the fronts to work, or the rears to work but not all six. I have tried everything I can think of.
Thanks,
Al

Hi,
Have you set up the C-Media drivers for 5.1/6.1 sound? The settings for each speaker configuration can be found if you double-click the c-media icon next to the clock and select the settings button. Note how the plug configuration changes if you change the type of speakers.
I found that the 6.1 configuration with the headphone(?) option ticked makes all my 5.1 speakers work ok. I'm not saying I haven't got any sound problems but at least they all work.
I've also found that individual apps also need to be setup for the better speakers as well. PowerDVD needs to have the setting specifically set or the sounds all over the place.
Hope this helps
YT

How can i disable the startup sound on the Droid Turbo?

How can I disable the startup sound on the Droid Turbo?

I was going to suggest doing the Following from the Link I added below to see if Silence Mode would silence the power up but on my Droid Maxx it does not the start up Droid is still present so I'm not really sure there is an option to silence it.
The First Link is for the ( Ultra Droid Maxx and Mini) the Second Link is for the Droid Turbo. the instructions for the two style of phones are the same.. as far as I could tell
Adjusting audio alerts
Adjusting audio alerts

How do I disable the startup sound on macbook pro 7,1?

I need to disable the startup sound on the macbook pro 7,1 running 10.6.8. If anyone can give me info I would appreciate it.

Look for Startup Sound on Macupdate.com
You really shouldn't turn it off, as if there is a error you won't be able to hear the beep codes.
However you can lower the volume.

How do I disable the startup sound?

How do I disable the startup sound? The sound that plays straight after you push the power button.

See this thread:
http://discussions.apple.com/thread.jspa?messageID=2505976&#2505976

Is there a terminal command to disable the "Boing' sound ?

Hello, Everyone
I was wondering if any one knows if there is a terminal command that can
be used to disable the "boing" sound that folders and files make (in Tiger)
as they are being moved about the desktop and or into finder windows.
A couple of people have looked in the System preferences,usual areas but
can not locate the file for this "Boing" sound. If any one knows I would love
the answer. TIA for reading this & any help.; )
Regards , Eme
 Power PC G4 (3.3) ♥ iMac Flat Panel 10.3.9 ] 15 Alum.PowerBook Tiger Mac OS X (10.4.6) AEBS & iMac Intel Core Duo 2gb
Message was edited by: Eme~

Mine doesn't make a sound when I do this.
I presume you have unchecked the "Play user interfacesound effects" > in System Preferences> Sound. The other OP wants to disable only the infamous boing. I found both the files you wrote of. Thank you very much !
I just needed to summarize this & then undoing if so desired.
Bill, please what would the command be for undoing this action ?
Launch Terminal and type this: sudo gzip
enter ~~
password prompt,
then this : /System/Library/PrivateFrameworks/ScreenReader.framework/Versions/A/Resources/S ounds/SpringForward.aiff
Is this correct ?
Thanks so very, very much for your expertise, patience and sharing it with me.~ Eme
 Power PC G4 (3.3) ♥ iMac Flat Panel 10.3.9 ] 15 Alum.PowerBook Tiger Mac OS X (10.4.6) AEBS & iMac Intel Core Duo 2gb

What is better to use? The onboard sound for the NF4 Plat/SLi or AUdigy 1?

?

Quote from: Luke51087123 on 09-July-05, 03:10:17
yeah i was just sayin the ls sucks and i havent had any issues with the onboard
A Xmas present NEVER sucks.
Quote
so as long as the audigy i get isnt an LS, im good?
I'd say so. The onboard sound isn't bad, but you get a more powerful DSP with much cooler driver mods(should you want something like that)

How can I disable the notification sound for remaining credit messages

My operator sends me a message after every call and text which tells me what remains of my monthly allowances. This is very useful and I don't want to turn it off. I've just got myself a Z10 and the only thing that annoys me about it is that I have not yet found out how to disable the notification sound for this type of message. The device is stock with the latest firmware and no apps.
I can change the notification for normal text messages in the settings, but there is no obvious entry to change for these messages. Does anyone know how to do it?

Zotan wrote:
My operator sends me a message after every call and text which tells me what remains of my monthly allowances. This is very useful and I don't want to turn it off. I've just got myself a Z10 and the only thing that annoys me about it is that I have not yet found out how to disable the notification sound for this type of message. The device is stock with the latest firmware and no apps.
I can change the notification for normal text messages in the settings, but there is no obvious entry to change for these messages. Does anyone know how to do it?
If the message comes in the (bell) notifications it can only be switched OFF globally.
If it is a text message, you can create a contact with the number, then Setting - Notifications - Contacts - Customise - Phone Calls, Email Messages, Text Messages, Other Messaging

Kt3 Ultra 2, with onboard sound problems

I'm just getting my new motherboard set up, and when i install the drivers for the onboard sound, I'm only getting the sound effect, equalizer and general tabs in the option screens, according to the manual I'm supposed to have speaker configuration and test tabs as well, without this, I cant use the rear connections for 5.1 audio, which makes my surround system pointless.
I have tried the new sound drivers from this site, but when I try to run it, the installer comes up with "alcxwdm.inf not found", and stops dead. The rest of my system is Athlon XP2000+, win 98, 40Gb Seagate drive, Creative DVD drive, and Dxr3 DVd decoder card.

Damn, so I'll have to put my SBLive 1024 card in, which will run ok, and have only 4 channels, which is actually inferior to the onboard sound (supposedly having 6 channels), of which I can only get 2, Great!
All of which doesnt tell me why the updated drivers wont install at all, and this is happening just when I want to use windows apps, havent tried dvd yet, no point if I cant get the rear plugs to output, until I put sblive in... DOH!

How to disable the builtin sound card on MS-7033 (915PM)

Sorry,
I was unable to find how to disable the builtin sound card on MS-7033 (915PM) in order to plug an other PCI sound card.
Is it automatic, via the Award bios or what ??
Thanks for any help..
PhL

Quote from: blazing storm on 18-February-05, 04:31:46
The device manager in control panel, which is under 'system' and then 'hardware'.
Thank you for your post. It seems to be the only one solution to this issue.
I was told (OEM support) that the bios is a generic one (reason why the AC97 line appear) but for this kind of mother board, it cannot be accessed.
Your solution works and I think it's enought.

Is the onboard sound better than SB live!

I been thinking of using onboard sound right now Im using a old sound blaster live! its not the 5.1 What do you guys think ? See my sig for mobo type
This is the sound chip on the mobo Realtek ALC650 it has 4 to 6 chan. and it also has a
S-bracket that has analog to digital audio outputs by intergrating both SPDIF.
Anyone here use there onboard sound? I would like to buy sometime till I can get a new soundcard I want to free up a pci slot.

Uninstall the SB Live, and all related components thru device manager, then go to control panel>add or remove programs. Remove any Creative programs related to the SB Live. Shutdown and remove the SB from the system. Upon bootup, enter BIOS, and in the "Integrated Periphrials" section, set the AC97 to enabled, and reboot.
During bootup, it should find the AC97, and ask for the drivers, cancel the prompt. Then open the folder containing the drivers, and install from there.
One thing to check while you have the case opened to remove the SB, look for the front audio header, usually "JAUD1", there needs to be 2 jumpers installed in order to direct sound to the rear audio ports. These are normally installed before the board ships, but can be left off. Never hurts to look. I believe the jumpers go on 5-6 and 9-10. Check your manual to verify. the front audio header is located at the bottom of the board, near the front. If you have no manual, click here to download one.

I finally found the way to DISABLE the annoying sound effect in Windows

I tried looking around the site for some answers to get rid of the annoying sound effect after a page loads in iTunes 8 on Windows Vista. I have found the answer!
*Vista users:* Right click on your desktop, and then go all the way down and click "Personalize". Then in personalize, click "Sounds". Scroll down until you see the iTunes category. Then simply click the "Page load complete" sound and choose (None) as the sound.
Annoying sound DISABLED.
Hope this helps!

do you tried this solution:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39227
Perhaps this want help you.....
Zyx

KT4 Ultra Disable the Onboard Sound?

Similar Messages

Maybe you are looking for