KT4 Ultra: FSB Setting for 2400+? and USB Keyboard not working

I just picked up a KT4 and an Athlon 2400+ - What FSB setting should i pick to make the processor detect as a 2400 (currently w/ a setting of 133, it's detecting as a 2000+ 1.67ghz when it should be 2ghz.) - Is there some setting other than the FSB that i need to change?
Also, when i try to use a USB keyboard, it doesn't work after POST. I am able to use the keyboard to change the bios settings etc... but once POST is done, the keyboard doesn't respond, and every time you press a key, the numlock light flashes quickly. - This also causes all the other USB devices (mice, etc...) to stop working. - Everything is fine if i plug the same keyboard in via PS2, but unfortunatly, this isn't a good long term solution because i use a USB KVM switch.
Any suggestions welcome!
TIA

Ok, the FSB thing is fixed, thanks for the help.
As far as the kvm being incompatable, i thought of that, and tried plugging the keyboard directly into a usb port and got the same results.
I have tried just about every setting i think would relate in the bios and none have seemed to help. ;(

Similar Messages

Why is my Intel iMac restarting randomly and USB keyboard not working randomly?

My intel iMac has been randomly rebooting itself without any error messages. It also seems to coincide with the keyboard (USB) not working, but not always. At first, it seemed to happen right after waking the computer from sleep, but now it happens when I am just sitting at the computer about once or twice a day. For now, i have temporarily removed all external devices (except time capsule) and disabled any bluetooth or iTunes synch'ing over wifi. I have also disabled all power management features.
I've tried different keyboards and resetting the SMC. Could bad memory cause this?

Could be anything from a loose power cable, to loose or bad RAM module.
1. Check all your power connections, including the mag connector on the back of the iMac.
2. Reinstall the RAM modules, as per > iMac: How to remove or install memory. When installing new or reinstalling RAM, be sure to push firmly on each module with both thumbs to insure that they are fully seated in the slots.
Then if it is still acting up...
3. Run the > Extended Apple Hardware Test

After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

I am also on my forth hard drive on the same model.
When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

My iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

my iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Color Swatches in Toolbar for Fill and Stroke are not working properly.

The color swatches in toolbar for fill and stroke are not functioning as they should. When I select an object on the artboard, the swatches display fine in the toolbar for what they should be. However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be.
I am using 16.2.1 (cloud) for Mac OS 10.8.2
I've submitted a bug report, but want to know if anyone else has had this issue and what they did to resolve the issue.
Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting. I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.

Double click the eyedropper, and turn on appearance, is off by default.
For your #000000 color problem that also likely is related to appearance setting. You may have for example have some with #000000 at the character level, and another color at the type level.

Touchsmart TX-2 fingerprint scanner and USB ports not working

Hi everyone,
Please forgive me if this is in the wrong spot.
Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
All advice really welcome and very much appreciated!
Thanks in advance

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Wifi hot spot and USB tethering not working

I updated my both Lenovo a 7000a phones to Bulid Number A7000-a_S144_150721_ROW today, Since then both of my phones stopped Wi Fi Tethering and USB Tethering.Base Band Version A7000.ROW.V15,2015/07/21 20.44I would like to mention further that Both the Wifi Tethering and USB tethering were working fine before the update! This is in contrast to the Previous bug found in S 142 version! Now devices are being connected but with limited connectivity.Please comment for a solution!

I would like to mention further that Both the Wifi Tethering and USB tethering were working fine before the update! This is in contrast to the Previous bug found in S 142 version! Now devices are being connected but with limited connectivity.

Paid for Conversion and it Does not Work

I paid to convert files and it is not working!!!! It keeps asking me to subscribe, when I have already subscribed and have paid!!!! And, I need to convert this document immediately!!!!

You have posted in the wrong forum and since the software/service is not identified I am unable to point you to the correct forum in which to post.
Here is a link to a page that links all of the Adobe forums. Find the one for the product your posting involves and post there:
http://forums.adobe.com/index.jspa

Apple usb keyboard not working

hello, recently my apple usb keyboard stopped working. the usb connections on the keyboard still work but the letter buttons do not do anything anymore. is the keyboard fried or is this fixable?

I assume you tried another USB port and tried the KB on another computer. A pc will suffice for testing purposes.

USB Keyboard not working after running Monolingual

Okay, I'm not a Mac person and should have known that I was going to mess up my mother's iMac, but here it is -
In an attempt to improve the mac's performance I performed all of the actions described in the following article: 11 Ways to Optimize your Mac's Performance ( http://lowendmac.com/eubanks/07/0312.html ). Basically, I cleaned up files and 'other' system preferences. Things seemed to be fine and the computer did run much better. However, after running Monolingual and deleting what I understood to be 'unnecessary' PowerPC files the standard USB keyboard is no longer working.
I've tried to search for various remedies, but have come to a dead end. So I'm left with reinstalling the Snow Leopard OS (I think it is 10.6.8?) BUT I can't because it is asking to input the account password (which I know) to make the change and I can't figure how to do that when the keyboard not working.
Any help would be great!
*feeling like a bone head*

How are you trying to reinstall Snow Leopard? If you're booting from the Snow Leopard or iMac Install DVD that came with the system then that should eliminate any of the issues you may or may not have caused when you deleted did the clean up work on your mom's system.
I suggest trying the following:
0) Verify that the caps lock key is off. It can make inputting passwords difficult if you don't realize it is ON.
1) Reset the PRAM by restarting the system then quickly press the command-option-P-R keys before the gray screen appears. Wait until you hear the computer restarts two times as indicated by the startup chime. For more info refer to http://support.apple.com/kb/ht1379.
2) If the issue persists after the PRAM reset then boot from the Snow Leopard or iMac Install DVD, whichever you have. Once you see the menu asking you to choose a language try using the arrow keys on the keyboard to move the language choice selection. If the arrow keys are working at this point it indicates your keyboard is at least partially functional. Go ahead and select the language then proceed to step 3.
3) Once the next screen appears move the cursor up to the menu bar area and pull down the Utilities menu. Select the 'Terminal' application. Once the Terminal application launches try typing the various keys on the keyboard and check to see if the correct characters are displayed. Please let us know if you detect any errors. If there are no errors then you should be able to quit the Terminal application and proceed with reintstalling the OS.

Apple USB Keyboard not working when connected in Macbook PRO retina

I have this problem. When I connect my new Apple usb keyboard directly to the laptop it does work. Is there any way to solve this problem?
BR

I just did the latest update and my Apple USB keyboard stopped working. The keyboard works fine with other computers and other keyboards work with my Macbook.
The keyboard ships with a three foot extension cable. I plugged the keyboard into the Macbook with this cable and now it's working fine. I think it has something to do with the USB port being 3.0. A USB hub may also solve the issue.
JD

Macbook MC516xx/a with 10.6.8 USB Keyboard not Working

I have read all the forums and have no clue what to do next.
I have done software update and still will not work.
Thoughts?
Jeff

Have you restarted your computer?

Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work.
I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
The drivers that are not working on Windows 7 32 bit are:
Realteck RTL8188EE 802-11b/gn witeless lan
Realteck ethnet die and
Intel High definition graphcs driver
Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
This question was solved.
View Solution.

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Webcam and usb drive not working--possible hardware issue?

Hello,
I recently purchased a Lenovo ideapad U510 with Windows 8. I bought it as a returned machine but the Staples employee didn't know why it had been returned and thought it was just because the buyer didn't like Windows 8. When I first set it up I kept getting an error message that my usb device was not recognized, even though I had never plugged anything in. As I was leaving the country, I dismissed the issue and decided to deal w/ it when I returned to the US, since my other usb drives worked fine.
However, later my integrated webcam stopped working as well. It worked one time when I used Skype but not after that. I checked online forums for possible solutions, and most said I needed to download an updated driver. I didn't think this was the issue b/c when I went to device manager and tried to update my driver for the easycam, it said I already had the most up-to-date driver. I have uninstalled drivers, downloaded and re-installed drivers, and even refreshed my computer, all to no avail.
Here are the error messages I receive:
In device manager>view>show hidden devices>imaging devices>Lenovo EasyCamera, device status says
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
When I try to run the Bison setup: Lenovo EasyCam has not found!
When I try to run the Chicony setup: Setup failed! Please Plugin camera and install driver again!
So, I'm thinking it's not a driver issue, but I'm not a techie and don't know what else it could be. Wondering if the usb problem and webcam problem are connected. Found another forum post that said maybe the webcam is not connected to the motherboard...suggestions?
Thank you in advance for your help.

I am certain it is a hardware issue from the problems youre describing. I would contact Lenovo. They may try to have you purchase their "software" support, but don't let them. I had wifi issues and they tried to make me spend $90 because I was too lazy to figure it out on my own.
Make sure when you're calling support that you tell them that you restored to factory default and before you send your computer in, back up your data. Also tell them that it's a new computer and you do not want to pay for shipping... They will most likely comp you shipping in both directions.

Both internal and USB mics not working

Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
Does anyone have any idea what could possibly be wrong?
For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
http://animeutahime.com/temp/faultymicrecording.mp3
iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
Having said that, I really like to get my internal mic back up and running again.
iBook Mac OS X (10.4.10) 1.5gb RAM, 60gb hard disk

KT4 Ultra: FSB Setting for 2400+? and USB Keyboard not working

Similar Messages

Maybe you are looking for