KT4 Ultra, I can install or detect the Sound Card.

I have a KY4 Ultra, model MS-6590 (v1.X), G52-M6590X6.
I can install, or detect the sound card. In the manual I found an option to enable or disable the Audio Controller, but in my MOBO, I can´t find this option.
The Windows 98SE can detect the Multimedia Card, and I tried to install manually with the "Drivers CD", but in the begining of the instalation, appears a message saying that there can detect the Sound Card.
What can be that ?

Quote
Originally posted by maesus
Do you mean in your MOBO as in hardware? The option to enable/disable the audio controller is inside the BIOS settings. Press DEL when you see the POST screen should lead you to the BIOS settings.
Where in the BIOS? I certianly cannot find it on my 6590 v4.0 board.

Similar Messages

How can I record what the sound card is outputting?

I have an app. that I need to be able to capture what the
sound card is outputting. That is I want to record anything that plays
from the sound card. I don't want to
have to route the speaker out to the mic in. Is there a way to
"capture" the sound as it is being played?
Thanks
Bob

As I understand you would like to record the sound (wave, midi, others...) generated by a third party application without a cable loop between soundcard output and any soundcard input (mic, line, aux).
Have you already tried to set the record input on the recording control panel of Windows to stereo mix and to use any standard labview vi (eg: snd read waveform) for recording?
Tomi
Attachments:
Setting of record input.png ‏59 KB

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

I have a 27" iMac with a 27" Cinema display. If I have Photoshop running on the cinema display, the menu bar is on the iMac. Is there any add on that I can install to make the menu bar follow the open app?

I have a 27" iMac with a 27" Cinema display. If I have Photoshop on the cinema display, the menu bar is way over on the iMac. Is there any add-on that I can install to make the menu bar follow the open app?

Look at SecondBar gives you a second menubar
<http://blog.boastr.net/?p=3>
Also see DejaMenu
Also see MenuEverywhere (Shareware)
And if you happen to have a Magic Trackpad, the SecondBar author has a very nice BetterTouchTool utility for creating Magic Trackpad gestures. I can not live with out BetterTouchTool on my 27" iMac with 24" external monitor.

Why not my laptop can't to pronounce the sound,but flash player can?

why not my laptop can't to pronounce the sound,but flash player can?
my app VLC can't make sound,but firefox by flash player can make sound ~~
sorry my english not wil *_*!
#lsmod | grep "snd_.*" [0]
snd_hda_codec_hdmi 24487 1
snd_hda_codec_conexant 47158 1
snd_hda_intel 26180 0
snd_hda_codec 98033 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 75167 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18934 1 snd_pcm
snd 59989 7 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
#alsamixer [0]
cannot open mixer: 无效的参数

VLC plugs directly into pulseaudio, while the firefox flash plugin uses ALSA to play sound. Do you have the pulseaudio-alsa package installed?
I have had a similar problem before. Sound would occasionally be controlled by ALSA and occasionally be controlled by pulse (the pulseaudio-alsa package did nothing). As far as symptoms, sometimes other applications would not produce sound while a flash video was playing and vice versa. Ultimately, I just removed everything pulse/ALSA-related, deleted (and backed up) my configuration files, and installed all related packages anew. It works now. I still don't really know what the problem was.

Can't record the sound card or internet rad

I have Vista with sound blaster audigy advanced MB factory installed. I installed Roxio 9 and I can't hear what I'm recording from line-inbut I can hear it after it's saved.
What I really?want to record is?the sound card or internet radio but when I click on record sound card in the Audio window the next window is the recorder and?under the box Capture From: [??]? my options are [Line-in] , [ rear mic], and [front mic]. I can't select a sound card. And the in the next box Input:? there are no options and it say [Master Volume].What must I do to get the?sound card to show in the Capture From:? and what is this Master Volume doing in a box that I should be able to select line-in or speakers, or midi.Can someone who has jumped this wall help me?Message Edited by Ridgerunner on 08-25-200708:47 PM

Funko wrote:
I want to record the original piano sound of my Yamaha Clavinova in garage band...
http://www.bulletsandbones.com/GB/GBFAQ.html#recordkeyboardssounds
(Let the page FULLY load. The link to your answer is at the top of your screen)

HT1688 I have a damaged I-Phone and I need the contents of my calendar off of it. I did not have Mobile me at the time. Can I swap out the sim card from the broken phone to a new phone and recover this calendar?

I have an older I-Phone (3G) that for some reason the body of the phone has split in two. This phone was a business phone and it had a lot of important information on it. I have a second phone that is also a 3G. On the broken phone there is a lot of important information that I need in my calendar. Im not worried about anything else but the calendar. I didn't have the Mobile Me account at that time or I would be having this problem. Does anybody know if I can ust switch out the sim cards. I just need to recover the old calendar, so im hoping that the calendar will transfer when I switch the sim card into the good 3G. If that doesn't work does anybody know of anyway that I can retrieve this information off of this phone?

Nothing is stored on the sim card on an iPhone. If you backed up to your computer the backup will contain your calendar events. Otherwise, if your phone isn't functioning there is no way to back up or extract your calendar at this point.

I recently updated the itunes software and now my iphone wont detect the sim card! what do i do?

I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?

Updating iTunes has nothing to do with an iDevice going into recovery mode.
If the device is in recovery mode, restore it via iTunes on a computer.

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

Hi, i bought a irig to connect my guitar on my macbook pro 2012, but when i use the irig in my mac, it doesnt recognize, so i cant choose it on preferences of sound, what can i do? (the sound of my guitar goes by IRIG but I can not hear due to feedback a

hi, i bought a irig to connect my guitar on my macbook pro 2012, but when i use the irig in my mac, it doesnt recognize, so i cant choose it on preferences of sound, what can i do? (the sound of my guitar goes by IRIG but I can not hear due to feedback and when I try to record another track on the garageband, the sounds recorded on the new track is catching the sound of another track recorded)

Turn the internal mic level off. Use headphones as monitors.

Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?

Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?

I would guess you need the A1460 model
see here
http://www.apple.com/ipad/LTE/

If you have iPhone4 and can you take out the sim card from iPhone4 and transfer it in to new iPhone4s?

if you have iPhone4 and can you take out the sim card from iPhone4 and transfer it in to new iPhone4s?

Under the circumstances this will probably considered a dumb question.
I currently have a jailbroken unlocked 3GS with a GoPhone plan. Works great. I am considering upgrading to a new factory unlocked 4S. Will I be able to swap in my current SIM card and go?

Hi, I'm running Logic Pro 8 with an audiophile sound card. I have my keyboard midi-ed into the sound card and obviously plugged into the computer. I can't get any input into the computer though. Nothing registers when I play. Output is fine. Any help? Tha

Hello,
My midi keyboard isn't registering on Logic Pro 8 and I can't work out why. It's all plugged up correctly. The sound card outputs fine - I can hear what I've previously recorded but can't input any more. Any help gratefully received.
Stephen.

Hi, thanks for reply. I was running Logic Express but upgraded. Now I seem to have problems. I have latest drivers for my audiophile. The operating system is 10.4.11. The keyboard just doesn't seem to register - in or out. I've spent hours on the environment, trying to decide which of the conflicting video tutorials to follow......

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics?

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

Can Anyone provide me with the sound card specs for a 2GHz MacBook Intel Core 2 Duo? The system profiler lists the audio card as Intel High Definition Audio: audiocode 63

ok thankx! but i must to know the output impendatie of my audio card= intel high definition audio? can somebody help me
this is my mac book
http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-alumi num-13-late-2008-unibody-specs.html

KT4 Ultra, I can install or detect the Sound Card.

Similar Messages

Maybe you are looking for