KT4 Ultra Line in
I am having problems getting any noticable audio from the blue line in jack on the KT4 Ultra (6590) Has anyone else experienced problems or can offer any advice. There is a feint mumble at full volume thats all, it works if I use the Mic-in jack but not line-in.
Kevin
System Spec
Kt4 Ultra
XP2600 333Mhx
512 Micron Memory
MSI GF4200 X8 video
2 x 80 GB Maxtor drives
Problem solved, disabled usb speakers and it now works.
Similar Messages
-
KT4 Ultra FISR C-Media line-in problem
Hi all.
Recently installed the KT4 Ultra - replaced ecs k7s5a
Very happy with the board so far.
However I cannot hear any sound from the line-in for this sound card. I'm using digital spidif output - from bracket. tv card audio out to sound line-in.
cannot hear the audio even if the mixer line-in is enabled.
The tricky bit is if i record video or use sound recorder it records the line-in audio!
I've never come across this before!
To make sure it wasnt the tv card I plugged in a radio - no line-in sound but if sound record - get sound from the play back of the created file!!!
Anyone know of a fix for this? Is it a dud m/b or component?
Apart from this issue i've been really impressed with the sound output from this M/B.
Any help would be greatly appreciated.
KT4 Ultra FSIR
Athlon 2.2gig (TBread)
512Mb 2700DDR Ram Legend brand
MSI G4MX440 8X Vidio Card
AverTV TV Card
Themal Take Volcano 3 Cooler
etc. etc
Adelaide South Australia.
Say No to War!!just to add i have the 1.3 bios
and latest onboard sound drivers from MSI web site!
Paulham -
No optical-out sound on MSI KT4-Ultra!!
Hi, I have recently set up a system based on the MSI KT4-Ultra board. I'm using an Athlon XP 1700+, a Radeon 9000 video card, and I've installed Windows 98.
Although all the drivers and audio applications which MSI provided installed fine, and 2-channel audio from the on-board sound chip works great both for music and for the 3-4 games I've installed so far, I can't seem to get the optical SPDIF port to work! I bought a cable and connected the computer to my Sony MD-player and attempted to copy my CDs onto MD. I go into the MSI control panel and check the box to enable SPDIF-out, removing the speaker cable from the analog line-out just for good measure. When I plug the optical cable into my MD it recognises digital input and prepares for recording. I press record on the MD and play on the computer's CD-player app, but the MD LED shows "no signal". I'm pretty sure both the MD recorder and cable are OK since I've used them to copy CDs from a Kenwood portable CD-player quite recently, so it must be the MB that's giving me problems. Indeed, when I've stopped playback in the CD-player app and went back into the audio control panel, I found that the SPDIF box had been unchecked of its own accord. I've tried this several times, and I've unplugged the S-bracket and reinstalled it all over again just to make sure it was plugged in properly, and I still get the same problem. All audio works fine except optical out! Haven't got a coaxial cable or recorder so I can't check if the coaxial port is equally buggered or if it's just the optical, but I'm getting really annoyed here: this was the one feature I liked best about this board and the only one which isn't working! Any ideas, anyone?dude, i think i can get u ur signal, but currently i can only get silent recordings, u may have better luck.
on the minidisc, there should be a switch or button that will toggle synchronised recording on and off, turning it off should get u a signal, but it wont be in sync wiv the cd, ie u cant trust it to form track gaps.
hope that helps, done flame me if it dont, if i manage to get substance to my recording, i will send u the info just in case.
take it easy -
KT4 Ultra FISR Updated Bios Still Reboots
I bought a KT4 Ultra last week. I hooked up everything needed to install my OS (Video and Hard Drive) to install Windows 2000. It took me a while to get a good install because it would crash in the middle of Win2K setup. After reading the posts on the subject I upgraded the Bios to 1.3. I no longer had problems with installing software of transferring large files between CD and HD. Although a bit slow, it worked.
But now I have another problem. The computer reboots when the CPU is being used hard, like running 3D intensive software. For example I have 3D studio rendering and then I try to open Internet explorer and computer will reboot.
I check my PSU by measuring the voltage (with DMM) on the 5 volt line and causing a reboot during CPU intensive activities. I even unplugged an extra HD and ran my FSB at 100 mhz. I did not notice any voltage drop and the computer still rebooted.
I need to decide to if I want to return the MB, before I go out a buy a PSU and find out it did not fix my problem.
Any ideas.Video Card is a
Video: Compro GeForce3 Ti 200
HD: Maxtor 30GB 7200 RPM ATA100
Power Supply (don't know brand name)
300W, with 150W for both the 3.3 and 5 Volts (at
least according to the label)
The computer also rebooted while trying to run
Nero to copy a CD image to hard drive. So I don't think its video card related. I had this video card in my ABIT KT7 with no problems.
M. -
KT4 Ultra MS-6590 - Win XP Home boots with 2GB DDR333 installed but not 3GB
Spec...
KT4 Ultra MS-6590
AMD Athlon XP 3000+ (FSB set to 166MHz in BIOS)
BIOS MS-6590v1.4
Win XP Home 2002, SP3
Problem...
Previously, had 768MB RAM installed, and XP strangely identified CPU as a 2200+.
Recently upgraded the RAM to 3GB DDR333 (3 sticks of 1GB 184-pin unbuff DIMM 128MX64 DDR PC2700), and changed BIOS settings for CPU and DRAM.
In the DOS boot screen, Win XP progress indicator fills completely from left to right, then stops with a half-blinking cursor in the top left of the screen.
Removed 1GB stick and Win XP successfully loaded, also now recognising the Athlon XP 3000+, and running a heck of a lot faster.
Tried adding the /3GB switch to the boot.ini file, which didn't do anything, and after reading more forum advice, guessed this might be irrelevant. I don't think this is a 4GT and PAE issue, as I'm not trying to install above 4GB (if I've correctly understood).
Also, forum advice (various sites) conflicts on whether Win XP 32-bit is limited to 2GB or 4GB, and I can't find any workarounds for my current setup.
Any ideas?Another test I've done is to enable boot logging with Win XP. This appends command lines to the file 'ntbtlog' in the windows directory, which mainly shows drivers being loaded as Win XP is launched. The log is normally date and time-stamped for every boot-logging session.
When all 3 sticks are installed, I cold boot, then press F8 and select 'enable boot logging' from the options menu. This is what appears on the screen as the system, attempts to load Win XP.
Loaded driver \WINDOWS\system32\ntoskrnl.exe
Loaded driver \WINDOWS\system32\hal.dll
Loaded driver \WINDOWS\system32\KDCOM.DLL
Loaded driver \WINDOWS\system32\BOOTVID.dll
Loaded driver ACPI.sys
Loaded driver \WINDOWS\System32\DRIVERS\WMILIB.SYS
Loaded driver pci.sys
Loaded driver isapnp.sys
Loaded driver viaide.sys
Loaded driver \WINDOWS\System32\DRIVERS\PCIIDEX.SYS
Loaded driver MountMgr.sys
Loaded driver ftdisk.sys
Loaded driver PartMgr.sys
Loaded driver VolSnap.sys
Loaded driver atapi.sys
Loaded driver disk.sys
Loaded driver \WINDOWS\System32\DRIVERS\CLASSPNP.SYS
Loaded driver fltmgr.sys
Loaded driver sr.sys
Loaded driver PxHelp20.sys
Loaded driver KSecDD.sys
Loaded driver Ntfs.sys
Loaded driver NDIS.sys
Loaded driver Mup.sys
Loaded driver BTHidMgr.sys
Then the process freezes and a solid white block appears in the top-left of the screen, with the top-right corner of the block blinking.
At this point, I turn off the PC using the main power switch, then remove the 3rd memory stick. After booting up again, with only 2 sticks installed, opening the text file 'ntbtlog' reveals that this boot event wasn't logged.
So, I reboot Win XP with only the 2 sticks installed, and select 'enable boot logging'. This time, the above list of loaded drivers is shown in the text file, plus a whole lot more. The potentially interesting observation is the next in the list after "Loaded driver BTHidMgr.sys" which is "Loaded driver \SystemRoot\System32\DRIVERS\amdk7.sys".
'amdk7.sys' is a driver file which seems to come with one of the Win XP Service Packs, and which "is necessary to enable Windows XP support for AMD PowerNow! technology on computers that use a mobile Athlon 4 or mobile Duron processor." http://support.microsoft.com/kb/306458
Various other posts refer to it in relation to AMD Athlon XP 3000+ Mobile, whereas mine is a 3000+ in a desktop. Also, if 'amdk7.sys' isn't available, then Win XP will load the generic driver 'processr.sys'. In fact, my 'ntbtlog' includes the entry "Did not load driver \SystemRoot\System32\DRIVERS\processr.sys" which would make sense.
However, my curiosity is that with the 3 sticks installed, Win XP fails to continue loading when reaching 'amdk7.sys' in the driver list.
Another test I did was to change the power management settings in the BIOS.
"IPCA Function: This item is to activate the ACPI (Advanced Configuration and Power
Management Interface) function. If your operating system is ACPI-aware, such
as Windows 98SE/2000/ME, select Yes. Available options: Yes, No."
This was normally set to Yes. When I set it to No and rebooted with 3 sticks installed, instead of a half-blinking white block (as described above), the screen went black and then the system rebooted itself...
The plot thickens!...
Maybe there's a clear explanation for this - however, I'm wary of doing something to the 'amdk7.sys' driver file (whether removing or disabling it somehow) in case it prevents Win XP from launching with just my 2 sticks installed. I'd guess there are precautions, but need further info on whether this is relevant, and what the implications might be. -
I have a Kt4 Ultra and when I'm gaming on line I get a beep ever once in awhile. I get out of the game to check if it's getting hot and the temp is around 46 - 47 deg. It doesn't cause a problem with the game( slow down or lock up) but I don't know the cause and I don't want it to get worse. Any ideas?
KT4 Ultra Pure
xp 2000+
kingston 256meg pc2700
WD 40 gig HD
Windows XP pro
Antec 300w SmartPower
Onboard soundIs that a system temperature or a CPU temperature? there shouldn't be any beeps if that is a system temp. You sound like you're running PC Alert4. Open the program, go down to the bottom left corner and click on "menu", then choose "settings". Disable "Sound Warning". That should take care of it.
-
KT4 Ultra-SR (MS-6590) dont work with AMD Barton 2500+
;( Please help me any1.
I have MBO KT4 Ultra-SR (MS-6590) with CPU AMD Barton 2500+ and i have a big problem. System corectly boot only if a select CPU FSB Clock = 100 MHz (CPU Ration/CPU Vcore/DDR Voltage=all AUTO). When a select CPU FSB Clock 133 or 166 MHz, system begin run corectly and after few second turned OFF. I selecting SDRAM Frequency on=AUTO/266/333/400 MHz but not working. My old CPU is AMD XP Palomino 2100 MHz and work fine with KT4 Ultra MBO. I upgrade BIOS with 1.4 version. I change memory module with PQI (PC 2700/256 MB) and JETRAM (PC 2700/256 MB) but is same ":censored: ". System dont work. Bad CPU Barton 2500+? I dont no. Please help me any1.
My System:
MBO KT4 Ultra-SR (MS-6590)
CPU AMD Barton 2500+ (FSB 333)
Memory DDR Samsung 2x256 MB (PC 3200) K4H56083D-TCC4
Cooler SPIRE WhisperRock IV+Artic Silver 3
HDD Seagate Baracuda 120 GB SATA
PSU Enermax 300W EG301P-VE(FMA)
VGA Saphire ATI Radeon 9100 (64 MB+TV/DVI-out)
DVD-ROM Pioneer 120S (16x speed)
CD-RW MSI CR52-A2 (52/24/52, Atapi)
FDD Teac 1.44 MB
Creative SoundBlaster Live! 5.1Most of the time, this sort of problems arise because of power suppliy issues.. U have a enamax 300W PSU which is a VERY GOOD PSU but might just be on the line...
If u can, try swapping the PSu for a good 400 or a 420W PSU.. this might solve your enigma.. I really dont think this is your processor...
Read this two articles on PSu wrtten by one moderater which will aid in solve in fixing your problem (PSU1 , PSU2 , Troubleshooting Guide )
Best of luck
RAsika -
Hi!
I have a kt4 ultra-bsr, cmi 8738.
Latest drivers from the site (also tried with the ones from http://www.cmedia.com.tw/ and windows update).
Hercules XPS 510 (5.1 speakers).
front left/front right: on the mainboard
surround left/right: on the s-bracket
center/subwoofer: on the s-bracket.
1. When I use the demo program, all speakers work ok.
2. When I play a mp3 in winamp (direct sound), no sound comes from the center speaker.
3. When I play a wma file in winamp (diret sound), sound comes only from the front speakers & the subwoofer.
4. If I have something on the line-in (ie walkman, tv tuner), sound is heared only from the front speakers & subwoofer.
I saw that the subwoofer from this speakers plays the low frequencies even if i use the front speakers connection only. So i presume that in case 2 the sound card outputs the signal only on the front and rear speakers, and in case 3 and 4 only the front speakers.
What I want:
in every case (mp3 / line-in / wma): front left and front right to be 'duplicated' to rear left/ rear right, and maybe front left&right combined into the center speaker. Or something like that.
But I also want true 5.1 when I play games or a DVD (i don't have a DVD player so I didn't tried that yet), so connecting all the jacks to the line-in (with a splitter) it's not a solution.
Thank you for reading this, and please excuse my bad english.The center speaker will work only with files made for 5.1 sound system, for example DVD movies. You will have to set you DVD software to 5.1 speakers.
For regular files (mp3s), you might need to find a player and/or plugins that will support center speaker, but that is an artificial solution. I know there are plugins for Windows Media Player 9 that will do that. -
Hey, I am new to these forums. Thought I would drop by and see if I can get some help with a new mobo I had just purchased.
I just purchased an MSI KT4 Ultra FISR. AMD 3200+ Capatible and allows for 400mhz memory to be placed.
I am going to purchase an AMD XP3200 Barton chip soon and would like to use the new type of memory. Either XP2700 (2x512mb @ 333mhz) or XP3200 (1x512 @400mhz). Ok... now for my question. I have been to MSI homepage and read the specs on this specific motherboard. It states that I can only use 1 stick of XP3200 (400mhz type) memory at 2 channels. Does anyone have this board and ever tried running it with XP3200 (2x512 @ 400mhz) totalling 1Ghz @ 400mhz?
Also will the XP3200+ operate with XP2700 memory running at 333mhz? Dumb question. I know.
Ya... if anyone has any suggestions as what I can do to mod this board feel free to let me know.
Another note... while looking through the product line MSI does not show it is carrying the KT4 Ultra FISR anymore.. Any reason as to why or is it now calld by another name?http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php?kind=1&CHIP=4&NAME=Socket%20A
its in the archive as via now make a 400a chipset so msi sell the new one now
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=442
yours is here
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=356 -
Urgent help with MSI KT4 Ultra
hey,
off my folks yesterday i got...
MSI KT4 Ultra
512mb DDR333 PC2700
Athlon XP 2600+
Maxtor DiamondMax9 40gb HDD...
i thought i had it all setup right with the HDD in IDE1, DVD and CD-RW in IDE2 and floppy in the floppy bit...
at 1st the CPU cwas only clocking at 1250mhz, but then came here and sorted that prob..... (Sperad spectrum then adjusted the FSB to 166mhz ) then after that, when i go to boot up i got.... "no device connected to the Fasttrack controller...bios not installed" then browing through the forum i found how to "solve" that problem... ( disabled the Serial ATA thing, dont know if thats right .... ) but now i dont get that "bios not installed" line any more.... all i get is a flashing line in the top left of my screen....
so to sum up....all i get now is.... that flashing line......what could be goin wrong?
Thanks in advance.....a very distressed...
//SimpoThis is an AMD board, so I will move your post to that forum.
-
KT4 Ultra - 4 leds in RED (Urgent)
I have a mb KT4 Ultra (MS-6590 v1.x) and cpu 2200+ .
When a turn on the pc all fans are working but the system dont boot, all 4 leds are red.
i just have enable the USB legacy support in BIOS and them save and exit , the pc hangs up , i reset pc and then the the 4 leds are red and dont boot anymore.
I make all i know for fixing but i´m out of ideas i dont know whats happend.
I clear the bios in jumper jbat1 and take out the 3v battery and dosent work.
What happend to the CPU?? Can anyone explain this...
My system:
KT4 Ultra (MS-6590 v1.0)
AMD ATHLON XP 2200+
2x256MB DDR333
G4Ti4200-TD 128mb
WINXP Prof. SP1a
PSU:
Model LC-A300ATX
AC-I/P| 115/230v~ | 8/4A | 60/50 Hz
DC- | +3.3V +5V | +12v -12v | -5v +5VSB
O/P | 20A 30A | 10A 0.8A | 0.5A 2A
+5v & +3.3v COMBINED LOAD 160W
TOTAL OUTPUT IS 300WIt would help if you tell us all you have done to fix problem. But I can say that 10 A. to 12v. line, seems very poor. I would disconnect all USB peripherals to see if PC boots. Also if before enabling USB legacy you connected USB brakets on Mobo's pinheaders, I would disconnect them too.
-
KT4 Ultra (C-Media Sound System
I recently installed The KT4 Ultra and ran the installation
CD. Everything went perfect. It was immediately up and
running. I have since found that I cannot get a CD to play
out of the rear speakers. I have tried with the S-bracket
and without it with the rear speakers plugged into the Line
In. The software has been set accordingly to 4 speakers in
each case. I know it is not the CD rom or the speakers.
Does anyone have any ideas . ALSO sound comes out of all
4 speakers for mp3's, wav files, midi's that are already
on the hard disk. It is just the playing of cd's.
THANKSIt's upto the software to emulate the rear channels since CD is stereo.
Try winamp 2.8 with the output plugin set to direct sound, works every time. -
Is FSB overclocking above 175 MHz possible with KT4 Ultra?
I would like to squeeze a few extra MHz out of my AMD XP2600+ (without unlocking or other hardmods that cost money if they fail...). I have upped the FSB to 175 successfully, which gives me just above 2200 MHz CPU speed as reported of Motherboard Monitor. But when I go above that, it crashes. Upping the voltage from auto (1.65 on my system) does not seem to help. A guy on an overclocking board suggested that it's because it stops in the AGP/PCI slot since there is no lock of those speeds. Is this possible in any way, or are there any other dirty tricks to use so I can get more speed out of this?
Thanks a lot in advance!thanks!!!yes, it really seems to be a power source issue...
i am using a powerline 450W power source, and the smart doctor utility form asus reported a reading of red marked warning 3.12 volts intead of 3.3 volts, also i tested the 3.3 rails using a multimeter while the system was on and capture drivers under conflict and it reported a 3.25 voltage.....i opened the power source's box and clean its dust, and so, the problem is not happening anymore!!.anyway smart doctors is reporting a 3.15 voltage instead of 3.3 (not in red or under warning message)and the multimeter is reporting 3.27. but everything is working fine: capture and tv out fetures while using the processor as an athlon 2800+ for the first time since i bought the motherboard........
the 5 volts line is reported by the multimeter with 4.95 volts after and before the problem was happening, same with smart doctor.
the hardware i used was:
-two MSI kt4 ultra boards
-kt4A
-an intel motherboard which i don't remember its brand, using dimm pc 133 memory(using anoter power supply)
-asus v8460 for all boards
-same ddr memory for all msi motherboards
since the voltage is still not 3.3 volts reported, even if the entire video card is working fine, and i only cleaned the box, and didn't change anything to its structure, maybe the problem could happen again, i guess i should buy another power source then.
i am very thankful
Andres.
PD: i see that a lot of people is having this kind of problem through the forum and maybe its due to this voltage stuff too....maybe it'd be a good idea if a sticky thread is posted repoting this stuff i believe. (if it hasn't yet of course) -
hi Guys,
This is the first time I have ever done this (removing Kt4 Ultra) so would be very grateful if you could help. I have looked in the manual but there is no help on removing the motherbard and the holes don't seem famiiar. I have tried using a screwdriver but it doesn't seem to release the motherbaord. Any help appreciated.Of course you removed first all cards inserted in slots and CPU/HSF and cables connected to Mobo. If you don't know where are the Mobo's holes you should take a look to the base plate where screws are inserted, so you'll have an exact idea where you'll find screws heads. For this, you have to take off side case cover. If not screws were used to mount Mobo, most possible plastic stand offs were used so you'll see white plastic points you can cut, freeing this way Mobo. Almost all Mobos has 6 holes ( 2 lines of 3 holes or 3 lines of 2 holes, 4 in the squares and 2 in the middle edges of Mobo) Take care when using screwdriver, as is easy to scrach Mobo.
-
Correct FSB for KT4 ultra 6950
Hi, I have a KT4 Ultra 6950 v1.0 (it has SATA so I think it's the "FISR" version but I don't know, nothing on mobo)
A few months ago, the speed of my PC took a nosedive, and I wonder if somehow the FSB has been reset/mis-set.
It's currently 100Mhz. I ran Fuzzy Logic 4, and it topped out at just 103Mhz.
However, I understand the KT4 should handle 200Mhz.
The memory is all 2700 (166Mhz) (1gb+512mb at the moment, another 1gb on order from crucial)
The CPUs are running at 50 degrees, the HDD at 60 degrees.
I don't know if I should manually set the FSB to 166 in the bios or not, bit scared!
Below is the output from CPU-Z. Sorry if I should have cut bits out, I'm not too sure what's important and what's not...
Anyone have any advise as to what the FSB should be set to please? Either to overclock it, or simply to put it to the 'correct' value?
Thanks,
Toby
CPU-Z version 1.46
Processors Map
Number of processors 1
Number of threads 1
Processor 0
-- Core 0
-- Thread 0
Processors Information
Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name AMD Athlon XP
Codename Thoroughbred
Specification AMD Athlon(tm)
Package Socket A (462)
CPUID 6.8.1
Extended CPUID 7.8
Core Stepping B0
Technology 0.13 um
Core Speed 1250.3 MHz (12.5 x 100.0 MHz)
Rated Bus speed 200.0 MHz
Instructions sets MMX (+), 3DNow! (+), SSE
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 256 KBytes, 16-way set associative, 64-byte line size
FID/VID Control no
Features
K7 Thermal sensor yes
Thread dumps
CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 02001002h
Max CPUID level 00000001h
Max CPUID ext. level 80000008h
Function eax ebx ecx edx
0x00000000 0x00000001 0x68747541 0x444D4163 0x69746E65
0x00000001 0x00000681 0x00000000 0x00000000 0x0383FBFF
0x80000000 0x80000008 0x68747541 0x444D4163 0x69746E65
0x80000001 0x00000781 0x00000000 0x00000000 0xC1C3FBFF
0x80000002 0x20444D41 0x6C687441 0x74286E6F 0x0020296D
0x80000003 0x00000000 0x00000000 0x00000000 0x00000000
0x80000004 0x00000000 0x00000000 0x00000000 0x00000000
0x80000005 0x0408FF08 0xFF20FF10 0x40020140 0x40020140
0x80000006 0x00000000 0x41004100 0x01008140 0x00000000
0x80000007 0x00000000 0x00000000 0x00000000 0x00000001
0x80000008 0x00002022 0x00000000 0x00000000 0x00000000
Cache descriptor Level 1 I 64 KB 1 thread(s)
Cache descriptor Level 1 D 64 KB 1 thread(s)
Cache descriptor Level 2 U 256 KB 1 thread(s)
MSR 0x0000001B edx = 0x00000000 eax = 0xFEE00900
MSR 0xC0010015 edx = 0x00000000 eax = 0x03031008
Chipset
Northbridge VIA KT400 (VT8377) rev. 00
Southbridge VIA VT8235 rev. 00
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 1536 MBytes
Memory Frequency 166.7 MHz (FSB + 66 MHz)
DRAM Interleave 4-way
CAS# 2.5
RAS# to CAS# 3
RAS# Precharge 3
Cycle Time (tRAS) 7
Memory SPD
DIMM #1
General
Memory type DDR
Manufacturer (ID) (0000000000000000)
Size 512 MBytes
Max bandwidth PC2700 (166 MHz)
Part number
Attributes
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 133 166
CAS# 2.0 2.5
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 6 7
DIMM #2
General
Memory type DDR
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 512 MBytes
Max bandwidth PC2700 (166 MHz)
Part number NT512D64S8HABG-6
Manufacturing date Week 02/Year 03
Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 133 166
CAS# 2.0 2.5
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 6 7
Dump Module #1
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 80 08 07 0D 0B 01 40 00 04 60 70 00 82 08 00 01
10 0E 04 0C 01 02 20 00 75 70 00 00 48 30 48 2A 80
20 75 75 45 45 00 00 00 00 00 3C 48 30 2D 55 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Dump Module #2
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 80 08 07 0D 0A 02 40 00 04 60 70 00 82 08 00 01
10 0E 04 0C 01 02 20 00 75 70 00 00 48 30 48 2A 40
20 75 75 45 45 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0B
40 7F 7F 7F 0B 00 00 00 00 03 4E 54 35 31 32 44 36
50 34 53 38 48 41 42 47 2D 36 20 20 00 00 03 02 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Monitoring
Mainboard Model MS-6590 (0x1A1 - 0x5F1150)
LPCIO
Vendor Winbond
Model W83697HF
Vendor ID 0x5CA3
Chip ID 0x60
Revision ID 0x16
Config Mode I/O address 0x2E
Dump config mode register space, LDN = 0xB
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 FF FF FF FF FF FF FF 0B FF FF FF FF FF FF FF FF
10 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
20 60 16 FF FE 50 00 00 FF 00 00 FF FF FF 30 00 FF
30 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
40 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
60 02 90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
70 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Hardware monitor
Winbond W83697HF hardware monitor
Voltage sensor 0 1.66 Volts [0x68] (CPU VCore)
Voltage sensor 1 3.33 Volts [0xD0] (AUX)
Voltage sensor 2 2.94 Volts [0xB8] (+3.3V)
Voltage sensor 3 5.35 Volts [0xC7] (+5V)
Voltage sensor 4 2.13 Volts [0x23] (+12V)
Temperature sensor 0 51°C (123°F) [0x33] (TMPIN0)
Temperature sensor 1 50°C (121°F) [0x63] (TMPIN1)
Fan sensor 0 4787 RPM [0x8D] (FANIN0)
Fan sensor 1 2428 RPM [0x8B] (FANIN1)
Dump hardware monitor
LPC Register space, base address = 0x0290
bank 0
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 01 FF 01 FF 00 00 00 00 01 01 01 01 3C 3C 0A 0A
10 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
20 68 03 CF B7 C8 23 34 33 8D 8B FF 11 98 31 5C 33
30 77 F1 1F 5E 04 41 F4 5B A6 D7 A9 49 63 98 00 00
40 01 00 10 00 00 00 00 9F 2D 02 01 44 18 15 00 A3
50 FF FF 00 FF FF FF 00 80 60 70 FF FF 11 01 FF 05
60 68 03 CF B7 C8 23 34 33 8D 8B FF 11 98 31 5C 33
70 77 F1 1F 5E 04 41 F4 5B A6 D7 A9 49 63 98 00 00
80 01 FF 01 FF 00 00 00 00 01 01 01 01 3C 3C 0A 0A
90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
A0 68 03 CF B7 C8 23 34 33 8D 8B FF 11 98 31 5C 33
B0 77 F1 1F 5E 04 41 F4 5B A6 D7 A9 49 63 98 00 00
C0 01 00 00 00 00 00 00 9F 2D 02 01 44 18 15 00 A3
D0 FF FF 00 FF FF FF 00 80 60 70 FF FF 11 01 FF 05
E0 68 03 CF B7 C8 23 34 33 8D 8B FF 11 98 31 5C 33
F0 77 F1 1F 5E 04 41 F4 5B A6 D7 A9 49 63 98 00 00
bank 1
50 31 80 00 4B 00 50 00 FF FF FF FF FF FF FF FF FF
bank 2
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 3
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 4
50 01 00 00 00 00 00 00 00 15 D7 1F 01 11 00 FF FF
PCI Device List
Host Bridge
bus 0 (0x00), device 0 (0x00), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0x3189
Revision ID 0x00
PI 0x00
SubClass 0x00
BaseClass 0x06
Cache Line 0x00
Latency 0x08
Header 0x00
PCI header
Address 0 (memory) 0xE0000000
Subvendor ID 0x1106
Subsystem ID 0x0000
Int. Line 0x00
Int. Pin 0x00
Capabilities
AGP Capability
Offset 80h
Version 3.5
Status enabled
Transfer rate 8x (max 8x)
Queue lenght 2 (max 32)
Power Management Capability
Offset C0h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 89 31 06 00 30 A2 00 00 00 06 00 08 00 00
10 08 00 00 E0 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40 00 19 88 80 82 44 01 00 11 19 88 10 82 44 00 00
50 C0 00 00 00 22 84 60 60 EE 00 40 40 50 60 60 60
60 00 AA 00 20 E6 99 40 1E 6D ED 54 D0 41 67 00 00
70 82 C8 00 01 00 09 50 00 01 00 00 00 00 00 00 02
80 02 C0 35 00 1B 0A 00 1F 12 03 00 1F 00 00 00 00
90 80 01 00 00 00 0F 01 00 00 00 14 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 21 98 00 88
B0 7F 00 00 00 44 00 00 00 8A 00 00 00 00 00 00 86
C0 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 16 F4 69 EA 0F 1C F1 19 21 FF 00 00 21 32 74 00
E0 00 00 00 00 00 FF 01 00 CC 77 9A CC 00 CC 20 00
F0 00 00 00 00 00 00 05 00 00 00 00 00 00 04 00 00
PCI to PCI Bridge
bus 0 (0x00), device 1 (0x01), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0xB168
Revision ID 0x00
PI 0x00
SubClass 0x04
BaseClass 0x06
Cache Line 0x00
Latency 0x00
Header 0x01
PCI header
Primary bus 0x00
Secondary bus 0x01
Int. Line 0x00
Int. Pin 0x00
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 68 B1 07 01 30 22 00 00 04 06 00 00 01 00
10 00 00 00 00 00 00 00 00 00 01 01 00 C0 C0 00 00
20 E0 DF E0 DF D0 BF C0 DF 00 00 00 00 00 00 00 00
30 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0C 00
40 81 C0 80 44 24 72 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Network Controller
bus 0 (0x00), device 6 (0x06), function 0 (0x00)
Common header
Vendor ID 0x1814
Model ID 0x0301
Revision ID 0x00
PI 0x00
SubClass 0x80
BaseClass 0x02
Cache Line 0x08
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xDFFF8000
Subvendor ID 0x1814
Subsystem ID 0x2561
Int. Line 0x0A
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 40h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 14 18 01 03 10 00 10 04 00 00 80 02 08 20 00 00
10 00 80 FF DF 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 01 06 00 00 14 18 61 25
30 00 00 00 00 40 00 00 00 00 00 00 00 0A 01 00 00
40 01 00 02 00 03 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Ethernet Controller
bus 0 (0x00), device 7 (0x07), function 0 (0x00)
Common header
Vendor ID 0x100B
Model ID 0x0020
Revision ID 0x00
PI 0x00
SubClass 0x00
BaseClass 0x02
Cache Line 0x00
Latency 0x20
Header 0x00
PCI header
Address 0 (port) 0x0000EC00
Address 1 (memory) 0xDFFF7000
Subvendor ID 0x1385
Subsystem ID 0xF331
Int. Line 0x13
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 40h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 0B 10 20 00 07 00 90 02 00 00 00 02 00 20 00 00
10 01 EC 00 00 00 70 FF DF 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 85 13 31 F3
30 00 00 FE DF 40 00 00 00 00 00 00 00 13 01 0B 34
40 01 00 82 FF 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Modem
bus 0 (0x00), device 8 (0x08), function 0 (0x00)
Common header
Vendor ID 0x10B9
Model ID 0x5459
Revision ID 0x00
PI 0x00
SubClass 0x03
BaseClass 0x07
Cache Line 0x00
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xDFFF6000
Address 1 (port) 0x0000E800
Subvendor ID 0x10A5
Subsystem ID 0x5459
Int. Line 0x12
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 40h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 B9 10 59 54 07 00 90 02 00 00 03 07 00 20 00 00
10 00 60 FF DF 01 E8 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 A5 10 59 54
30 00 00 00 00 40 00 00 00 00 00 00 00 12 01 00 00
40 01 00 22 C0 00 00 00 00 00 00 00 00 00 00 00 00
50 A5 10 59 54 00 00 00 00 08 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Audio device
bus 0 (0x00), device 12 (0x0C), function 0 (0x00)
Common header
Vendor ID 0x13F6
Model ID 0x0111
Revision ID 0x10
PI 0x00
SubClass 0x01
BaseClass 0x04
Cache Line 0x00
Latency 0x20
Header 0x00
PCI header
Address 0 (port) 0x0000E400
Subvendor ID 0x1462
Subsystem ID 0x5900
Int. Line 0x10
Int. Pin 0x01
Capabilities
Power Management Capability
Offset C0h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 F6 13 11 01 05 00 10 02 10 00 01 04 00 20 00 00
10 01 E4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 62 14 00 59
30 00 00 00 00 C0 00 00 00 00 00 00 00 10 01 02 18
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OHCI FireWire Controller
bus 0 (0x00), device 14 (0x0E), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0x3044
Revision ID 0x46
PI 0x10
SubClass 0x00
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xDFFF5800
Address 1 (port) 0x0000E000
Subvendor ID 0x0000
Subsystem ID 0x0000
Int. Line 0x11
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 50h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 44 30 17 00 10 02 46 10 00 0C 08 20 00 00
10 00 58 FF DF 01 E0 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 50 00 00 00 00 00 00 00 11 01 00 20
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 01 00 02 E4 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Ethernet Controller
bus 0 (0x00), device 15 (0x0F), function 0 (0x00)
Common header
Vendor ID 0x14E4
Model ID 0x16A6
Revision ID 0x02
PI 0x00
SubClass 0x00
BaseClass 0x02
Cache Line 0x08
Latency 0x40
Header 0x00
PCI header
Address 0 (memory) 0xDFF90000
Subvendor ID 0x1462
Subsystem ID 0x585B
Int. Line 0x12
Int. Pin 0x01
Capabilities
PCI-X Capability
Offset 40h
Power Management Capability
Offset 48h
Version 1.1
Virtual Product Data Capability
Offset 50h
Message Signalled Interrupts Capability
Offset 58h
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 E4 14 A6 16 06 00 B0 02 02 00 00 02 08 40 00 00
10 04 00 F9 DF 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 62 14 5B 58
30 00 00 00 00 40 00 00 00 00 00 00 00 12 01 40 00
40 07 48 00 00 F9 FF 43 04 01 50 02 C0 00 20 00 64
50 03 58 00 00 00 09 03 A0 05 00 86 00 10 02 C1 20
60 00 42 00 81 20 08 00 00 98 02 02 10 00 00 3F 76
70 96 10 00 00 1F 00 00 80 E0 56 03 00 08 02 00 00
80 02 00 00 00 00 00 00 04 34 00 13 04 82 00 08 00
90 09 02 00 01 00 00 00 D4 00 00 00 00 91 00 00 00
A0 00 00 00 00 C9 01 00 00 00 00 00 00 27 00 00 00
B0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
C0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
D0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
E0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
F0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
USB Controller (UHCI)
bus 0 (0x00), device 16 (0x10), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0x3038
Revision ID 0x80
PI 0x00
SubClass 0x03
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x80
PCI header
Address 4 (port) 0x0000D400
Subvendor ID 0x1106
Subsystem ID 0x3038
Int. Line 0x15
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 38 30 17 00 10 22 80 00 03 0C 08 20 80 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 01 D4 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30 00 00 00 00 80 00 00 00 00 00 00 00 15 01 00 00
40 40 12 03 00 00 00 00 00 00 0B 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 C2 FF 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
USB Controller (UHCI)
bus 0 (0x00), device 16 (0x10), function 1 (0x01)
Common header
Vendor ID 0x1106
Model ID 0x3038
Revision ID 0x80
PI 0x00
SubClass 0x03
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x80
PCI header
Address 4 (port) 0x0000D800
Subvendor ID 0x1106
Subsystem ID 0x3038
Int. Line 0x15
Int. Pin 0x02
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 38 30 17 00 10 02 80 00 03 0C 08 20 80 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 01 D8 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30 00 00 00 00 80 00 00 00 00 00 00 00 15 02 00 00
40 40 12 03 00 00 00 00 00 00 0B 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 C2 FF 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
USB Controller (UHCI)
bus 0 (0x00), device 16 (0x10), function 2 (0x02)
Common header
Vendor ID 0x1106
Model ID 0x3038
Revision ID 0x80
PI 0x00
SubClass 0x03
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x80
PCI header
Address 4 (port) 0x0000DC00
Subvendor ID 0x1106
Subsystem ID 0x3038
Int. Line 0x15
Int. Pin 0x03
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 38 30 17 00 10 02 80 00 03 0C 08 20 80 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 01 DC 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30 00 00 00 00 80 00 00 00 00 00 00 00 15 03 00 00
40 40 12 03 00 00 00 00 00 00 0B 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 C2 FF 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
USB 2.0 Controller (EHCI)
bus 0 (0x00), device 16 (0x10), function 3 (0x03)
Common header
Vendor ID 0x1106
Model ID 0x3104
Revision ID 0x82
PI 0x20
SubClass 0x03
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xDFFF5700
Subvendor ID 0x1106
Subsystem ID 0x3104
Int. Line 0x15
Int. Pin 0x04
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 04 31 17 00 10 02 82 20 03 0C 08 20 00 00
10 00 57 FF DF 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31
30 00 00 00 00 80 00 00 00 00 00 00 00 15 04 00 00
40 00 00 03 00 00 00 00 00 80 10 00 09 00 00 00 00
50 00 5A 04 80 00 00 00 00 04 0B 66 66 33 66 00 00
60 20 20 01 00 00 00 00 00 01 00 00 00 00 00 00 C0
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 C2 FF 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
PCI to ISA Bridge
bus 0 (0x00), device 17 (0x11), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0x3177
Revision ID 0x00
PI 0x00
SubClass 0x01
BaseClass 0x06
Cache Line 0x00
Latency 0x00
Header 0x80
PCI header
Subvendor ID 0x1106
Subsystem ID 0x0000
Int. Line 0x00
Int. Pin 0x00
Capabilities
Power Management Capability
Offset C0h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30 00 00 00 00 C0 00 00 00 00 00 00 00 00 00 00 00
40 44 00 F8 0B 00 00 00 00 0C 20 00 00 44 00 08 08
50 C1 0D 09 00 00 00 00 00 43 80 FF 00 00 00 04 08
60 00 00 00 00 10 00 02 04 00 00 00 00 00 00 00 00
70 06 11 00 00 00 00 00 00 00 00 00 00 20 00 00 00
80 20 84 59 00 9A 10 00 00 01 08 00 00 04 18 00 00
90 00 00 00 00 B0 C4 03 00 50 49 20 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 01 04 01 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 14 08 C3 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00
IDE Controller
bus 0 (0x00), device 17 (0x11), function 1 (0x01)
Common header
Vendor ID 0x1106
Model ID 0x0571
Revision ID 0x06
PI 0x8A
SubClass 0x01
BaseClass 0x01
Cache Line 0x00
Latency 0x20
Header 0x00
PCI header
Address 4 (port) 0x0000FC00
Subvendor ID 0x1106
Subsystem ID 0x0571
Int. Line 0xFF
Int. Pin 0x01
Capabilities
Power Management Capability
Offset C0h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 71 05 07 00 90 02 06 8A 01 01 00 20 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 01 FC 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30 00 00 00 00 C0 00 00 00 00 00 00 00 FF 01 00 00
40 0B F2 09 05 18 1C C0 00 20 20 20 20 FF 00 B6 B6
50 F6 17 F1 F1 4C 03 00 00 A8 A8 A8 A8 00 00 00 00
60 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70 02 01 00 00 00 00 00 00 02 01 00 00 00 00 00 00
80 28 ED ED 09 00 00 00 00 80 F2 ED 09 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 00
VGA Controller
bus 1 (0x01), device 0 (0x00), function 0 (0x00)
Common header
Vendor ID 0x1002
Model ID 0x4144
Revision ID 0x00
PI 0x00
SubClass 0x00
BaseClass 0x03
Cache Line 0x08
Latency 0xFF
Header 0x80
PCI header
Address 0 (memory) 0xD0000000
Address 1 (port) 0x0000C800
Address 2 (memory) 0xDFEF0000
Subvendor ID 0x1002
Subsystem ID 0x0002
Int. Line 0x10
Int. Pin 0x01
Capabilities
AGP Capability
Offset 58h
Version 3.0
Status enabled
Transfer rate 8x (max 8x)
Queue lenght 1 (max 256)
Power Management Capability
Offset 50h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 02 10 44 41 87 00 B0 02 00 00 00 03 08 FF 80 00
10 08 00 00 D0 01 C8 00 00 00 00 EF DF 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 00
30 00 00 EC DF 58 00 00 00 00 00 00 00 10 01 08 00
40 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 00
50 01 00 02 06 00 00 00 00 02 50 30 00 1B 02 00 FF
60 12 03 00 1F 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Display Controller
bus 1 (0x01), device 0 (0x00), function 1 (0x01)
Common header
Vendor ID 0x1002
Model ID 0x4164
Revision ID 0x00
PI 0x00
SubClass 0x80
BaseClass 0x03
Cache Line 0x08
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xC8000000
Address 1 (memory) 0xDFEE0000
Subvendor ID 0x1002
Subsystem ID 0x0003
Int. Line 0xFF
Int. Pin 0x00
Capabilities
Power Management Capability
Offset 50h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 02 10 64 41 87 00 B0 02 00 00 80 03 08 20 00 00
10 08 00 00 C8 00 00 EE DF 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 02 10 03 00
30 00 00 00 00 50 00 00 00 00 00 00 00 FF 00 08 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 01 00 02 06 00 00 00 00 02 50 30 00 1B 02 00 FF
60 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
DMI
DMI BIOS
vendor American Megatrends Inc.
version Version 07.00T
date 04/02/01
DMI System Information
manufacturer Time Computers
product MS-6590
version 1.0
serial 00000000
UUID 00000000-00000000-00000000-00000000
DMI Baseboard
vendor MSI
model MS-6590
revision 1.0
serial 00000000
DMI System Enclosure
manufacturer Uknown Chassis Manufacture
chassis type Desktop
chassis serial 123456890
DMI Processor
manufacturer AMD
model AMD Athlon(tm)
clock speed 1250.0 MHz
FSB speed 100.0 MHz
multiplier 12.5x
DMI Memory Controller
correction 32-bit ECC
Max module size 1024 MBytes
DMI Memory Module
designation DIMM1
size 1024 MBytes (single bank)
DMI Memory Module
designation DIMM2
size 512 MBytes (double bank)
DMI Memory Module
designation DIMM3
DMI Extension Slot
designation PCI1
type PCI
width 32 bits
populated no
DMI Extension Slot
designation PCI2
type PCI
width 32 bits
populated yes
DMI Extension Slot
designation PCI3
type PCI
width 32 bits
populated yes
DMI Extension Slot
designation PCI4
type PCI
width 32 bits
populated yes
DMI Extension Slot
designation PCI5
type PCI
width 32 bits
populated no
DMI Extension Slot
designation PCI6
type PCI
width 32 bits
populated no
DMI Port Connector
designation USB (internal)
designation Def (external)
port type SSA SCSI
connector Mini Centronics
connector DB-25 male
Software
Windows Version Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
DirectX Version 9.0c
Resources
Memory I/O Space, BA=0x00000000E0000000
Memory I/O Space, BA=0x00000000DFFF8000
Port I/O Space, BA=0xEC00
Memory I/O Space, BA=0x00000000DFFF7000
Memory I/O Space, BA=0x00000000DFFF6000
Port I/O Space, BA=0xE800
Port I/O Space, BA=0xE400
Memory I/O Space, BA=0x00000000DFFF5800
Port I/O Space, BA=0xE000
Memory I/O Space, BA=0x00000000DFF90000
Port I/O Space, BA=0xD400
Port I/O Space, BA=0xD800
Port I/O Space, BA=0xDC00
Memory I/O Space, BA=0x00000000DFFF5700
Port I/O Space, BA=0xFC00
Memory I/O Space, BA=0x00000000D0000000
Port I/O Space, BA=0xC800
Memory I/O Space, BA=0x00000000DFEF0000
Memory I/O Space, BA=0x00000000C8000000
Memory I/O Space, BA=0x00000000DFEE0000
Port I/O Space, BA=0x808, size=0x4
Memory I/O Space, BA=0x00000000FEE00000, size=0x1000
Port I/O Space, BA=0x400
Port I/O Space, BA=0x290
Port I/O Space, BA=0x2E@BOSSKILLER and @HenryW
Thanks for the link and info
Unfortunately I don't know the OPN. It's not being reported by any of the half dozen CPU reporting programs I've tried, and I don't really fancy taking the cooling fan off to find it
However I did find out that my CPU is a Thoroughbred Athlon XP. I still don't know the speed, but the MSI CPU list shows that the FSB should either be 133 or 166
I tried using "Fuzzy Logic 4" to set the FSB to 133, but the PC just instantly rebooted. I could try setting it to 166, or setting it in the bios directly, but now I'm afraid I'll either blow it up, or it won't boot and I'll need to blank the CMOS, which I'd prefer to avoid.
Any advice on how to proceed would be appreciated, thanks
Toby
Maybe you are looking for
-
Find Hidden Characters-in downloaded file
All, I have a file interface that downloading file to SANS server using open dataset. But recently we are getting some hidden characters in the file. These are getting from a long text. Now my requirement is to find these hidden characters and displa
-
Is it a way to use bluetooth voice system in my volvo s80 with iPhone ?
is it a way to use bluetooth voice system in my volvo s80 with iPhone ? Volvo system can not see iPhone, like my old phone.
-
Sun Studio 11 f90 INTERNAL COMPILER ERROR: "FWOutput"
Hello SUN-Users, I am new here, so I don't know I am right here!? I have a w2100z with two opteron proc. With Sun Studio 11 I am trying to compile the new MUMPS (Ver. 4.6) package, but I get still the error message: f90 -I/opt/mpich/include -Dpord -I
-
aFTER DOWNLOADING A SONG FROM A Target/Crest PROMOTION, THE SONG DOES NOT SHOW UP IN MY LIBRARY. Oops. Anyway, my menu for web downloads and purchases, etc., is not showing. Just the media library. How do I get back to the page that shows my web
-
How to get query execution time without running...?
Hi , I had one requirement .... as follows ...... i had 3 sql statements . I need to execute only one sql which execution time is very less. Can any one help me , how to get query execution time without running that query and without using explain pl