Kt4 ultra-pci slots
i have recently bought a kt4 abd sucessfully installed my pny graphics card and hard drives etc.however when i attempt to install any pci card in any pci slot i get a string of beeps and my system hangs.
when i remove the card the system reboots no problem.
any suggestions welcome :(
hi thanks for all your previous help
i have a new problem now with win 2000/xp.everything works ok under win 98 but when i choose my other o/s i can not install my terratec ewsmmt sound card i get a code 10 error which represents a driver error.i have used old and new updated drivers with no avail.on xp my hp scsi cd 2000 will also not load as well an atapi cd rom now and then.this is very frustrating as cubase sx only runs on 2000/xp.any ideas?
i have tried various ways of installing cards in different slots and orders but it still does not work
Similar Messages
-
KT4 Ultra PCI slot not recognising Audigy
Just wondering if you guys could help me out on this.
I have a KT4 Ultra mobo with two of the six PCI slots occupied by a generic/Conexant ADSL modem and the card part of an Audigy 2 Platinum eX. Everything was working fine until two days ago. Then, I opened my case to read the details of the PSU (for a proposed graphics card purchase that has now been canned due to said PSU being underpowered). However, when I booted up again neither the sound card nor the modem were recognised in Windows. I rebooted several times and the problem remained. So, I removed the case and moved the cards into different slots. I booted up again and there were 8 beeps, a pause, and then a further 2 beeps, but nothing appeared on the screen. I moved the cards around again and ensured that they were seated firmly in the slots. The PC then booted up but nothing appeared on the screen. I fixed this by pushing the graphics card (Radeon 9000 Pro) more firmly into its slot - presumably it had come unseated somehow when I had opened the case. This time, the PC booted up and, although the modem was recognised, it would not connect. I reinstalled the modem drivers and then it connected and functioned fine, however the sound card remains undetected. Should I try to reseat the card in its current slot or should I move it to a different slot? I just don't want to cause another problem by disturbing everything!
Apologies for my general newbieness: despite being a computer science student I have never built a PC myself and would consider myself a novice when it comes to the practical side of PC hardware. I guess I should take apart and rebuild the nine-year-old PC that is sitting in the garage!
Thanks for your help,
NickQuote
Then, I opened my case to read the details of the PSU (for a proposed graphics card purchase that has now been canned due to said PSU being underpowered)
could you list the PSU specs for us? -
I read one post written by maesus that said:
FSB over 152MHz > PCI Multiplier is 5, not only in 166Mhz.
I say that SiSoft Sandra show wrong value of PCI frequency.
What, if exists, one good program to show PCI frequency correctly?
[]'sslackdm,
no software that I know of.
However, there is something like this one :
http://www.vicstech.com/en/rd2/index.shtml -
KT4 ultra Agp 3.0 slots compliance with agp 2.0 graphics cards
Ive just bought a KT4 Ultra motherboard and am now looking for a graphics card. What i want to know is what its compliance is like with graphics cards that are agp 2.0 (2x 4x). ive heard different views from web pages some that agp 3.0 is fully backward compliant with 2.0 and others the opposite, whats the score with the KT4 Ultra board, what cards do people know it works fine with. Im looking in the range of GF4 Ti 4200 - 4600. Any info, help or reccomendations on good cards would be appreciated
thanxany of those cards will work
-
UNMOUNTABLE_BOOT_VOLUME KT4 Ultra MS-6590
I have been get this UNMOUNTABLE_BOOT_VOLUME error all day. I been try to install XP Pro but it alway does this after I begin the install progress.
I have done fdisk, Partition Magic format, windows install format, and format but I keep get this error. I thought that it was was the hard drive but I try install XP on my ASUS K7V mobo and it work without a prob.
The reason I reinstall is to turn off the APIC and APCI so I can stop the infinite loop error I been getting. I have restore the default setting and still doesn't work.
System Config:
CPU: 2200+ XP
Motherboard: KT4 Ultra-SR
RAM Slot-1: Kingston 333 512 MB CL 2.5
RAM Slot-2: None
RAM Slot-3: None
display card: AIW Radeon 9700
IDE-1M: Western Digital 200 GB SE 8MB
IDE-1S: None
IDE-2M: Samsung 48x-16x-48x CD-R/RW SD-616Q
IDE-2S: Samsung 16X DVD SW-248B
IDE-3: None
SER-1: None
SER-2: None
PCI-1: None
PCI-2:None
PCI-3: None
PCI-4: None
PCI-5: None
PCI-6: None
PSU: (Antec AMD Approved 350W)
BIOS revision: 1.3
Operating System: WIN XPThis had happened to me a few months ago. What had happened on my system was that the Book Sector to the hard drive had been overwritten.
I loaded the recovery console from the XP CD and wrote a new one on there. Then the system loaded perfectly. No problems since.
Hope this may help
Andrew -
Hi,
I have installed a Tekram DC390U2W LVD SCSI adapter on my KT4 Ultra. My problem is that I cannot select any of the five connected SCSI disks as a boot device in the BIOS (BBS-n), nor can I select 'Legacy SCSI' as a boot device, they simply don't exist as options in the Boot Sequence menu. I've used this card (and were able to boot) without problem using a MSI KT266 motherboard, so I don't think the problem is the SCSI adapter. Any ideas would be appreciated.I've disabled all motherboard options (Serial ATA Raid/1394/USB 2.0/GBLAN/Audio controllers), remove all PCI cards exept the Tekram card and tried it in all PCI slots without success. Also tried to assign different IRQs to the SCSI card in the BIOS. Tekram support responded that the SCSI card is fully PnP/BBS/PCI 2.1 specification compliant and they're unaware of any KT400 issues. There are issues (and work arounds) with this SCSI card when using it on motherboards with an on-board SCSI controller and older Award BIOS versions, but that's not applicable here.
Anyone out there using this SCSI card and motherboard got this combination to work as intended? -
Kt4 Ultra temp XP cooler and performance
hola, please intruct me
ive just build my kt4 ultra with an atlhon XP 2,2
and my temps are cpu 58 C when midle loaded and system temp 52 C, i dont know i its normal, im using the cooler that comes with the cpu
my question is that temp normal?
when i use the XP cooler of pc alert, the performance of the sistem change? how much?
thank you
excuse my english
KT 4 ULTRA
HD 80 GB 7200
512 RAM 21oo
Geforce 4 mx 440The system temp sensor may be between the first PCI slot and AGP slot, or somewhere near there if not mistaken. If you use a hot graphics card, that part will get hot too. Even it it's not, bad air flow around that area will accumulate heat too. Try with your casing fully opened and compare. If the temp dropped, then it's OK. If not, then you might have an issue.
Again, as long as it's stable, any temperature is OK. -
KT4 Ultra: conflict w/ expansion cards
This is my first post, so please be gentle. I recently built new PC for photo editing and want to keep this old KT4 Ultra computer for general usage right beside. Both are running Windows XP Home SP3.
My KT4 computer had HDD crash and after replacement and fresh istallation of XP I initially had following expansion cards inside:
USB Expansion card (w/ 4 USB ports) on Slot 2 (INT B#)
Realtek RTL8139 Family PCI Fast Ethernet NIC on Slot 3 (INT D#)
Terratec EWX 24/96 Sound Card on Slot 6 (INT C#)
Everything was OK until I wanted a LAN connection for sharing of files (mostly) and Internet (via cable modem) between these two. Instead of a broadband wired router I opted for a Gigabit Ethernet card installing it on slot 5 (INT B#).
USB Expansion card (w/ 4 USB ports) on Slot 2 (INT B#)
Realtek RTL8139 Family PCI Fast Ethernet NIC on Slot 3 (INT D#)
D-Link DGE-528T Gigabit Ethernet Adapter on Slot 5 (INT B#)
Terratec EWX 24/96 Sound Card on Slot 6 (INT C#)
Somehow didn't want to have it on slot 1, so close to video card. Unfortunately after this the sound card was dropped by the system, a yellow question mark in Device Manager.
Further I failed to instal my Bluetooth Dongle which I earlier had used succesfully for communication to my mobile phone. Now my Broadcom USB Bluetooth Device is put under Unknown in Device Manager.
I did experience problems with the sound card several years ago in this very same PC. That time I knew little about system and BIOS setting and had to use another PC for audio purposes (digitalizing of tapes and vinyl).
As reference I used the PCI Interrup Request Routing table, found on page 2-32 in KT4's manual. Funny thing is that Sandra XI tells now that my two Ethernet cards having both INT pin A# while by their slots they should be B# and D#. I don't have true understanding what this means though. In BIOS the PNP/PCI Configurations has all slot IRQs on Auto.
Is this conflict easily cured by re-positioning card(s) on other slot(s) or addressing IRQ settings manually, and if so how and in which order? Or should I remove all the cards and install them in certain order...?
I'm quite exhausted as I had some component issues with my new PC and now this KT4 once again rejects my sound card. Maybe I'm better off by installing it on my new PC, but then this failure with Bluetooth dongle, (which I put on the USB port of KT4, not on the USB exp. card.) Oh my, why can't sound card and ethernet card live together!?!
I would appreciate your help very highly.Hope you get things like you want them!
Eh, made this in 2003, but I'm not sure if it isn't more confusing than anything else:
"The use and sharing of IRQs aren't mentioned in my MSI manual, (due to the APIC function I think), so I had to go to some ASUS manuals. As standards are standards, I believe things can't be to different. If someone has any addings or suggestions please come forward, so I can adjust the table.
*Please note that this is generally speaking and mainly for ASUS boards a few years old!
**Please note that you should not have any sharing with the IDE controller or similar!
***Please note that it is a good thing to have expansion PCI sound cards in slot 3!
****Please note that surprisingly enough it looks like PCI slot 2 would be free for any device, but AGP cards get hot and bigger so it is not a great idea.
IRQ sharing table
PCI 1 shares with PCI slot 5
2 shares with AGP and PCI slot 6, or sometimes with onboard IDE
3 shares not, or sometimes with onboard audio/modem
4 shares with onboard LAN
5 shares PCI slot 1
6 shares with AGP and PCI slot 5
AGP slot shares with PCI slots 5 and 6
USB 1 shares with USB 2, 3 and USB 2.0
2 shares with USB 1, 3 and USB 2.0
3 shares with USB 1, 2 and USB 2.0
USB 2.0 shares with USB 1, 2, and 3
Onboard audio/modemshares not, or sometimes with slot 3
Onboard LAN shares with PCI slot 4
Onboard IDE shares not, or sometimes with PCI slot 2 "
Normally it is best to let Windows or whatever OS you run do the job. Setting IRQ:s yourself is a (too) big assignment. -
KT4 Ultra + WinXP/2K installation errors!
Hi, I've just finishing building my pc, after a few slitgh problems which have been sorted, thanx to wonkanoby..specs are as follows :
AMD Duron 1.3 w Coolermaster HS/F
KT4 Ultra Lite
GF4 MX440 8X
Maxtor Fireball 40g HDD (connected to IDE1 as master)
52x CD-Rom (connected as slave)
256mb ddr 2100
Ethernet network card
Audiophile 2496 soundcard
2 front USB
Floppy drive
350w PSU
(All these products apart from the soundcard are brand new bought last saturday, and i know that the soundcard works fine)
I sorted out BIOS and began to install (firstly) windows XP, this all ran smoothly until it froze on the initial setup screen (the one where it opens and copies files-still) It froze firstly after everything had ran through and the screen said (at the bottom) something similar to this (sorry bad memory) "starting windows". I restarted the pc and it all ran through again however this time freezing on something simlar to this "Hewlett packard ...... being installed" again i restarted the pc and i just got a message saying "Unable to boot from CD-ROM code - 8"
I decided to try windows 2k, which is on a PC downstairs, just to see if i could get the thng running and then upgrade to XP. However this time it didn't freeze but came up with an error similar to this one "unable to open ???.sys file may be corrupt or missing" I then restarted the pc and it came up with a different error message, instead of the .sys file it was a .DLL...... ?? ?(
I THEN decided to try my windows 98 which was used on my last pc, again it froze on setup!!
Does anybody have any idea whats going on here?
The POST recognizes the memory and hard drive and cpu.
Please someboady help?!?!
cheers
aL
p.s. The BIOS ran through fine and I didn't change that much from the default settings.It gets through the memory test ok on POST so I don't recon its that... plus the memory is brand new....
I ran windows setup 3 more times just now (win2k one) and got the following error messages :
1. "File setupdd.sys could not be loaded
The error code is 7
Setup cannot continue. Press any key to exit"
(pressing a key restarts the setup)
2. After getting through setup for about 2 minutes this error message came up :
"The file tffsport.sys is corrupted
Press any key to continue"
(pressing a key again restarts the setup)
3."File \i386\ntkrnlmp.exe could not be loaded.
The error code is 4
Press any key to exit"
If it's the power supply, would disconnecting all additional hardware from the pci slots, just have the bare minimum to run, accomplish the problem until i get a more powerful power supply???
**just tried it with bare min, and still no joy :(**
Maybe i'm just destined not to have a working PC!!
cheers again
aL -
Is FSB overclocking above 175 MHz possible with KT4 Ultra?
I would like to squeeze a few extra MHz out of my AMD XP2600+ (without unlocking or other hardmods that cost money if they fail...). I have upped the FSB to 175 successfully, which gives me just above 2200 MHz CPU speed as reported of Motherboard Monitor. But when I go above that, it crashes. Upping the voltage from auto (1.65 on my system) does not seem to help. A guy on an overclocking board suggested that it's because it stops in the AGP/PCI slot since there is no lock of those speeds. Is this possible in any way, or are there any other dirty tricks to use so I can get more speed out of this?
Thanks a lot in advance!thanks!!!yes, it really seems to be a power source issue...
i am using a powerline 450W power source, and the smart doctor utility form asus reported a reading of red marked warning 3.12 volts intead of 3.3 volts, also i tested the 3.3 rails using a multimeter while the system was on and capture drivers under conflict and it reported a 3.25 voltage.....i opened the power source's box and clean its dust, and so, the problem is not happening anymore!!.anyway smart doctors is reporting a 3.15 voltage instead of 3.3 (not in red or under warning message)and the multimeter is reporting 3.27. but everything is working fine: capture and tv out fetures while using the processor as an athlon 2800+ for the first time since i bought the motherboard........
the 5 volts line is reported by the multimeter with 4.95 volts after and before the problem was happening, same with smart doctor.
the hardware i used was:
-two MSI kt4 ultra boards
-kt4A
-an intel motherboard which i don't remember its brand, using dimm pc 133 memory(using anoter power supply)
-asus v8460 for all boards
-same ddr memory for all msi motherboards
since the voltage is still not 3.3 volts reported, even if the entire video card is working fine, and i only cleaned the box, and didn't change anything to its structure, maybe the problem could happen again, i guess i should buy another power source then.
i am very thankful
Andres.
PD: i see that a lot of people is having this kind of problem through the forum and maybe its due to this voltage stuff too....maybe it'd be a good idea if a sticky thread is posted repoting this stuff i believe. (if it hasn't yet of course) -
Correct FSB for KT4 ultra 6950
Hi, I have a KT4 Ultra 6950 v1.0 (it has SATA so I think it's the "FISR" version but I don't know, nothing on mobo)
A few months ago, the speed of my PC took a nosedive, and I wonder if somehow the FSB has been reset/mis-set.
It's currently 100Mhz. I ran Fuzzy Logic 4, and it topped out at just 103Mhz.
However, I understand the KT4 should handle 200Mhz.
The memory is all 2700 (166Mhz) (1gb+512mb at the moment, another 1gb on order from crucial)
The CPUs are running at 50 degrees, the HDD at 60 degrees.
I don't know if I should manually set the FSB to 166 in the bios or not, bit scared!
Below is the output from CPU-Z. Sorry if I should have cut bits out, I'm not too sure what's important and what's not...
Anyone have any advise as to what the FSB should be set to please? Either to overclock it, or simply to put it to the 'correct' value?
Thanks,
Toby
CPU-Z version 1.46
Processors Map
Number of processors 1
Number of threads 1
Processor 0
-- Core 0
-- Thread 0
Processors Information
Processor 1 (ID = 0)
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name AMD Athlon XP
Codename Thoroughbred
Specification AMD Athlon(tm)
Package Socket A (462)
CPUID 6.8.1
Extended CPUID 7.8
Core Stepping B0
Technology 0.13 um
Core Speed 1250.3 MHz (12.5 x 100.0 MHz)
Rated Bus speed 200.0 MHz
Instructions sets MMX (+), 3DNow! (+), SSE
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 256 KBytes, 16-way set associative, 64-byte line size
FID/VID Control no
Features
K7 Thermal sensor yes
Thread dumps
CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 02001002h
Max CPUID level 00000001h
Max CPUID ext. level 80000008h
Function eax ebx ecx edx
0x00000000 0x00000001 0x68747541 0x444D4163 0x69746E65
0x00000001 0x00000681 0x00000000 0x00000000 0x0383FBFF
0x80000000 0x80000008 0x68747541 0x444D4163 0x69746E65
0x80000001 0x00000781 0x00000000 0x00000000 0xC1C3FBFF
0x80000002 0x20444D41 0x6C687441 0x74286E6F 0x0020296D
0x80000003 0x00000000 0x00000000 0x00000000 0x00000000
0x80000004 0x00000000 0x00000000 0x00000000 0x00000000
0x80000005 0x0408FF08 0xFF20FF10 0x40020140 0x40020140
0x80000006 0x00000000 0x41004100 0x01008140 0x00000000
0x80000007 0x00000000 0x00000000 0x00000000 0x00000001
0x80000008 0x00002022 0x00000000 0x00000000 0x00000000
Cache descriptor Level 1 I 64 KB 1 thread(s)
Cache descriptor Level 1 D 64 KB 1 thread(s)
Cache descriptor Level 2 U 256 KB 1 thread(s)
MSR 0x0000001B edx = 0x00000000 eax = 0xFEE00900
MSR 0xC0010015 edx = 0x00000000 eax = 0x03031008
Chipset
Northbridge VIA KT400 (VT8377) rev. 00
Southbridge VIA VT8235 rev. 00
Graphic Interface AGP
AGP Revision 3.0
AGP Transfer Rate 8x
AGP SBA supported, enabled
Memory Type DDR
Memory Size 1536 MBytes
Memory Frequency 166.7 MHz (FSB + 66 MHz)
DRAM Interleave 4-way
CAS# 2.5
RAS# to CAS# 3
RAS# Precharge 3
Cycle Time (tRAS) 7
Memory SPD
DIMM #1
General
Memory type DDR
Manufacturer (ID) (0000000000000000)
Size 512 MBytes
Max bandwidth PC2700 (166 MHz)
Part number
Attributes
Number of banks 1
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 133 166
CAS# 2.0 2.5
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 6 7
DIMM #2
General
Memory type DDR
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 512 MBytes
Max bandwidth PC2700 (166 MHz)
Part number NT512D64S8HABG-6
Manufacturing date Week 02/Year 03
Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Nominal Voltage 2.50 Volts
EPP no
XMP no
Timings table
Frequency (MHz) 133 166
CAS# 2.0 2.5
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 6 7
Dump Module #1
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 80 08 07 0D 0B 01 40 00 04 60 70 00 82 08 00 01
10 0E 04 0C 01 02 20 00 75 70 00 00 48 30 48 2A 80
20 75 75 45 45 00 00 00 00 00 3C 48 30 2D 55 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 81
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Dump Module #2
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 80 08 07 0D 0A 02 40 00 04 60 70 00 82 08 00 01
10 0E 04 0C 01 02 20 00 75 70 00 00 48 30 48 2A 40
20 75 75 45 45 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0B
40 7F 7F 7F 0B 00 00 00 00 03 4E 54 35 31 32 44 36
50 34 53 38 48 41 42 47 2D 36 20 20 00 00 03 02 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Monitoring
Mainboard Model MS-6590 (0x1A1 - 0x5F1150)
LPCIO
Vendor Winbond
Model W83697HF
Vendor ID 0x5CA3
Chip ID 0x60
Revision ID 0x16
Config Mode I/O address 0x2E
Dump config mode register space, LDN = 0xB
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 FF FF FF FF FF FF FF 0B FF FF FF FF FF FF FF FF
10 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
20 60 16 FF FE 50 00 00 FF 00 00 FF FF FF 30 00 FF
30 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
40 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
60 02 90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
70 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Hardware monitor
Winbond W83697HF hardware monitor
Voltage sensor 0 1.66 Volts [0x68] (CPU VCore)
Voltage sensor 1 3.33 Volts [0xD0] (AUX)
Voltage sensor 2 2.94 Volts [0xB8] (+3.3V)
Voltage sensor 3 5.35 Volts [0xC7] (+5V)
Voltage sensor 4 2.13 Volts [0x23] (+12V)
Temperature sensor 0 51°C (123°F) [0x33] (TMPIN0)
Temperature sensor 1 50°C (121°F) [0x63] (TMPIN1)
Fan sensor 0 4787 RPM [0x8D] (FANIN0)
Fan sensor 1 2428 RPM [0x8B] (FANIN1)
Dump hardware monitor
LPC Register space, base address = 0x0290
bank 0
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 01 FF 01 FF 00 00 00 00 01 01 01 01 3C 3C 0A 0A
10 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
20 68 03 CF B7 C8 23 34 33 8D 8B FF 11 98 31 5C 33
30 77 F1 1F 5E 04 41 F4 5B A6 D7 A9 49 63 98 00 00
40 01 00 10 00 00 00 00 9F 2D 02 01 44 18 15 00 A3
50 FF FF 00 FF FF FF 00 80 60 70 FF FF 11 01 FF 05
60 68 03 CF B7 C8 23 34 33 8D 8B FF 11 98 31 5C 33
70 77 F1 1F 5E 04 41 F4 5B A6 D7 A9 49 63 98 00 00
80 01 FF 01 FF 00 00 00 00 01 01 01 01 3C 3C 0A 0A
90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
A0 68 03 CF B7 C8 23 34 33 8D 8B FF 11 98 31 5C 33
B0 77 F1 1F 5E 04 41 F4 5B A6 D7 A9 49 63 98 00 00
C0 01 00 00 00 00 00 00 9F 2D 02 01 44 18 15 00 A3
D0 FF FF 00 FF FF FF 00 80 60 70 FF FF 11 01 FF 05
E0 68 03 CF B7 C8 23 34 33 8D 8B FF 11 98 31 5C 33
F0 77 F1 1F 5E 04 41 F4 5B A6 D7 A9 49 63 98 00 00
bank 1
50 31 80 00 4B 00 50 00 FF FF FF FF FF FF FF FF FF
bank 2
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 3
50 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
bank 4
50 01 00 00 00 00 00 00 00 15 D7 1F 01 11 00 FF FF
PCI Device List
Host Bridge
bus 0 (0x00), device 0 (0x00), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0x3189
Revision ID 0x00
PI 0x00
SubClass 0x00
BaseClass 0x06
Cache Line 0x00
Latency 0x08
Header 0x00
PCI header
Address 0 (memory) 0xE0000000
Subvendor ID 0x1106
Subsystem ID 0x0000
Int. Line 0x00
Int. Pin 0x00
Capabilities
AGP Capability
Offset 80h
Version 3.5
Status enabled
Transfer rate 8x (max 8x)
Queue lenght 2 (max 32)
Power Management Capability
Offset C0h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 89 31 06 00 30 A2 00 00 00 06 00 08 00 00
10 08 00 00 E0 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40 00 19 88 80 82 44 01 00 11 19 88 10 82 44 00 00
50 C0 00 00 00 22 84 60 60 EE 00 40 40 50 60 60 60
60 00 AA 00 20 E6 99 40 1E 6D ED 54 D0 41 67 00 00
70 82 C8 00 01 00 09 50 00 01 00 00 00 00 00 00 02
80 02 C0 35 00 1B 0A 00 1F 12 03 00 1F 00 00 00 00
90 80 01 00 00 00 0F 01 00 00 00 14 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 21 98 00 88
B0 7F 00 00 00 44 00 00 00 8A 00 00 00 00 00 00 86
C0 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 16 F4 69 EA 0F 1C F1 19 21 FF 00 00 21 32 74 00
E0 00 00 00 00 00 FF 01 00 CC 77 9A CC 00 CC 20 00
F0 00 00 00 00 00 00 05 00 00 00 00 00 00 04 00 00
PCI to PCI Bridge
bus 0 (0x00), device 1 (0x01), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0xB168
Revision ID 0x00
PI 0x00
SubClass 0x04
BaseClass 0x06
Cache Line 0x00
Latency 0x00
Header 0x01
PCI header
Primary bus 0x00
Secondary bus 0x01
Int. Line 0x00
Int. Pin 0x00
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 68 B1 07 01 30 22 00 00 04 06 00 00 01 00
10 00 00 00 00 00 00 00 00 00 01 01 00 C0 C0 00 00
20 E0 DF E0 DF D0 BF C0 DF 00 00 00 00 00 00 00 00
30 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0C 00
40 81 C0 80 44 24 72 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 02 02 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Network Controller
bus 0 (0x00), device 6 (0x06), function 0 (0x00)
Common header
Vendor ID 0x1814
Model ID 0x0301
Revision ID 0x00
PI 0x00
SubClass 0x80
BaseClass 0x02
Cache Line 0x08
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xDFFF8000
Subvendor ID 0x1814
Subsystem ID 0x2561
Int. Line 0x0A
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 40h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 14 18 01 03 10 00 10 04 00 00 80 02 08 20 00 00
10 00 80 FF DF 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 01 06 00 00 14 18 61 25
30 00 00 00 00 40 00 00 00 00 00 00 00 0A 01 00 00
40 01 00 02 00 03 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Ethernet Controller
bus 0 (0x00), device 7 (0x07), function 0 (0x00)
Common header
Vendor ID 0x100B
Model ID 0x0020
Revision ID 0x00
PI 0x00
SubClass 0x00
BaseClass 0x02
Cache Line 0x00
Latency 0x20
Header 0x00
PCI header
Address 0 (port) 0x0000EC00
Address 1 (memory) 0xDFFF7000
Subvendor ID 0x1385
Subsystem ID 0xF331
Int. Line 0x13
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 40h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 0B 10 20 00 07 00 90 02 00 00 00 02 00 20 00 00
10 01 EC 00 00 00 70 FF DF 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 85 13 31 F3
30 00 00 FE DF 40 00 00 00 00 00 00 00 13 01 0B 34
40 01 00 82 FF 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Modem
bus 0 (0x00), device 8 (0x08), function 0 (0x00)
Common header
Vendor ID 0x10B9
Model ID 0x5459
Revision ID 0x00
PI 0x00
SubClass 0x03
BaseClass 0x07
Cache Line 0x00
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xDFFF6000
Address 1 (port) 0x0000E800
Subvendor ID 0x10A5
Subsystem ID 0x5459
Int. Line 0x12
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 40h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 B9 10 59 54 07 00 90 02 00 00 03 07 00 20 00 00
10 00 60 FF DF 01 E8 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 A5 10 59 54
30 00 00 00 00 40 00 00 00 00 00 00 00 12 01 00 00
40 01 00 22 C0 00 00 00 00 00 00 00 00 00 00 00 00
50 A5 10 59 54 00 00 00 00 08 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Audio device
bus 0 (0x00), device 12 (0x0C), function 0 (0x00)
Common header
Vendor ID 0x13F6
Model ID 0x0111
Revision ID 0x10
PI 0x00
SubClass 0x01
BaseClass 0x04
Cache Line 0x00
Latency 0x20
Header 0x00
PCI header
Address 0 (port) 0x0000E400
Subvendor ID 0x1462
Subsystem ID 0x5900
Int. Line 0x10
Int. Pin 0x01
Capabilities
Power Management Capability
Offset C0h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 F6 13 11 01 05 00 10 02 10 00 01 04 00 20 00 00
10 01 E4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 62 14 00 59
30 00 00 00 00 C0 00 00 00 00 00 00 00 10 01 02 18
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
OHCI FireWire Controller
bus 0 (0x00), device 14 (0x0E), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0x3044
Revision ID 0x46
PI 0x10
SubClass 0x00
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xDFFF5800
Address 1 (port) 0x0000E000
Subvendor ID 0x0000
Subsystem ID 0x0000
Int. Line 0x11
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 50h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 44 30 17 00 10 02 46 10 00 0C 08 20 00 00
10 00 58 FF DF 01 E0 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 50 00 00 00 00 00 00 00 11 01 00 20
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 01 00 02 E4 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Ethernet Controller
bus 0 (0x00), device 15 (0x0F), function 0 (0x00)
Common header
Vendor ID 0x14E4
Model ID 0x16A6
Revision ID 0x02
PI 0x00
SubClass 0x00
BaseClass 0x02
Cache Line 0x08
Latency 0x40
Header 0x00
PCI header
Address 0 (memory) 0xDFF90000
Subvendor ID 0x1462
Subsystem ID 0x585B
Int. Line 0x12
Int. Pin 0x01
Capabilities
PCI-X Capability
Offset 40h
Power Management Capability
Offset 48h
Version 1.1
Virtual Product Data Capability
Offset 50h
Message Signalled Interrupts Capability
Offset 58h
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 E4 14 A6 16 06 00 B0 02 02 00 00 02 08 40 00 00
10 04 00 F9 DF 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 62 14 5B 58
30 00 00 00 00 40 00 00 00 00 00 00 00 12 01 40 00
40 07 48 00 00 F9 FF 43 04 01 50 02 C0 00 20 00 64
50 03 58 00 00 00 09 03 A0 05 00 86 00 10 02 C1 20
60 00 42 00 81 20 08 00 00 98 02 02 10 00 00 3F 76
70 96 10 00 00 1F 00 00 80 E0 56 03 00 08 02 00 00
80 02 00 00 00 00 00 00 04 34 00 13 04 82 00 08 00
90 09 02 00 01 00 00 00 D4 00 00 00 00 91 00 00 00
A0 00 00 00 00 C9 01 00 00 00 00 00 00 27 00 00 00
B0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
C0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
D0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
E0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
F0 00 00 00 00 00 00 00 D5 00 00 00 00 00 00 00 D5
USB Controller (UHCI)
bus 0 (0x00), device 16 (0x10), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0x3038
Revision ID 0x80
PI 0x00
SubClass 0x03
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x80
PCI header
Address 4 (port) 0x0000D400
Subvendor ID 0x1106
Subsystem ID 0x3038
Int. Line 0x15
Int. Pin 0x01
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 38 30 17 00 10 22 80 00 03 0C 08 20 80 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 01 D4 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30 00 00 00 00 80 00 00 00 00 00 00 00 15 01 00 00
40 40 12 03 00 00 00 00 00 00 0B 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 C2 FF 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
USB Controller (UHCI)
bus 0 (0x00), device 16 (0x10), function 1 (0x01)
Common header
Vendor ID 0x1106
Model ID 0x3038
Revision ID 0x80
PI 0x00
SubClass 0x03
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x80
PCI header
Address 4 (port) 0x0000D800
Subvendor ID 0x1106
Subsystem ID 0x3038
Int. Line 0x15
Int. Pin 0x02
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 38 30 17 00 10 02 80 00 03 0C 08 20 80 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 01 D8 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30 00 00 00 00 80 00 00 00 00 00 00 00 15 02 00 00
40 40 12 03 00 00 00 00 00 00 0B 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 C2 FF 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
USB Controller (UHCI)
bus 0 (0x00), device 16 (0x10), function 2 (0x02)
Common header
Vendor ID 0x1106
Model ID 0x3038
Revision ID 0x80
PI 0x00
SubClass 0x03
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x80
PCI header
Address 4 (port) 0x0000DC00
Subvendor ID 0x1106
Subsystem ID 0x3038
Int. Line 0x15
Int. Pin 0x03
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 38 30 17 00 10 02 80 00 03 0C 08 20 80 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 01 DC 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30 00 00 00 00 80 00 00 00 00 00 00 00 15 03 00 00
40 40 12 03 00 00 00 00 00 00 0B 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 C2 FF 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
USB 2.0 Controller (EHCI)
bus 0 (0x00), device 16 (0x10), function 3 (0x03)
Common header
Vendor ID 0x1106
Model ID 0x3104
Revision ID 0x82
PI 0x20
SubClass 0x03
BaseClass 0x0C
Cache Line 0x08
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xDFFF5700
Subvendor ID 0x1106
Subsystem ID 0x3104
Int. Line 0x15
Int. Pin 0x04
Capabilities
Power Management Capability
Offset 80h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 04 31 17 00 10 02 82 20 03 0C 08 20 00 00
10 00 57 FF DF 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31
30 00 00 00 00 80 00 00 00 00 00 00 00 15 04 00 00
40 00 00 03 00 00 00 00 00 80 10 00 09 00 00 00 00
50 00 5A 04 80 00 00 00 00 04 0B 66 66 33 66 00 00
60 20 20 01 00 00 00 00 00 01 00 00 00 00 00 00 C0
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 01 00 C2 FF 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00
PCI to ISA Bridge
bus 0 (0x00), device 17 (0x11), function 0 (0x00)
Common header
Vendor ID 0x1106
Model ID 0x3177
Revision ID 0x00
PI 0x00
SubClass 0x01
BaseClass 0x06
Cache Line 0x00
Latency 0x00
Header 0x80
PCI header
Subvendor ID 0x1106
Subsystem ID 0x0000
Int. Line 0x00
Int. Pin 0x00
Capabilities
Power Management Capability
Offset C0h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 77 31 87 00 10 02 00 00 01 06 00 00 80 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 06 11 00 00
30 00 00 00 00 C0 00 00 00 00 00 00 00 00 00 00 00
40 44 00 F8 0B 00 00 00 00 0C 20 00 00 44 00 08 08
50 C1 0D 09 00 00 00 00 00 43 80 FF 00 00 00 04 08
60 00 00 00 00 10 00 02 04 00 00 00 00 00 00 00 00
70 06 11 00 00 00 00 00 00 00 00 00 00 20 00 00 00
80 20 84 59 00 9A 10 00 00 01 08 00 00 04 18 00 00
90 00 00 00 00 B0 C4 03 00 50 49 20 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 01 04 01 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 14 08 C3 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00
IDE Controller
bus 0 (0x00), device 17 (0x11), function 1 (0x01)
Common header
Vendor ID 0x1106
Model ID 0x0571
Revision ID 0x06
PI 0x8A
SubClass 0x01
BaseClass 0x01
Cache Line 0x00
Latency 0x20
Header 0x00
PCI header
Address 4 (port) 0x0000FC00
Subvendor ID 0x1106
Subsystem ID 0x0571
Int. Line 0xFF
Int. Pin 0x01
Capabilities
Power Management Capability
Offset C0h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 06 11 71 05 07 00 90 02 06 8A 01 01 00 20 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 01 FC 00 00 00 00 00 00 00 00 00 00 06 11 71 05
30 00 00 00 00 C0 00 00 00 00 00 00 00 FF 01 00 00
40 0B F2 09 05 18 1C C0 00 20 20 20 20 FF 00 B6 B6
50 F6 17 F1 F1 4C 03 00 00 A8 A8 A8 A8 00 00 00 00
60 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70 02 01 00 00 00 00 00 00 02 01 00 00 00 00 00 00
80 28 ED ED 09 00 00 00 00 80 F2 ED 09 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 06 00 71 05 06 11 71 05 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 07 00 00 00 00 00 00 00 00 00
VGA Controller
bus 1 (0x01), device 0 (0x00), function 0 (0x00)
Common header
Vendor ID 0x1002
Model ID 0x4144
Revision ID 0x00
PI 0x00
SubClass 0x00
BaseClass 0x03
Cache Line 0x08
Latency 0xFF
Header 0x80
PCI header
Address 0 (memory) 0xD0000000
Address 1 (port) 0x0000C800
Address 2 (memory) 0xDFEF0000
Subvendor ID 0x1002
Subsystem ID 0x0002
Int. Line 0x10
Int. Pin 0x01
Capabilities
AGP Capability
Offset 58h
Version 3.0
Status enabled
Transfer rate 8x (max 8x)
Queue lenght 1 (max 256)
Power Management Capability
Offset 50h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 02 10 44 41 87 00 B0 02 00 00 00 03 08 FF 80 00
10 08 00 00 D0 01 C8 00 00 00 00 EF DF 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 00
30 00 00 EC DF 58 00 00 00 00 00 00 00 10 01 08 00
40 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 00
50 01 00 02 06 00 00 00 00 02 50 30 00 1B 02 00 FF
60 12 03 00 1F 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Display Controller
bus 1 (0x01), device 0 (0x00), function 1 (0x01)
Common header
Vendor ID 0x1002
Model ID 0x4164
Revision ID 0x00
PI 0x00
SubClass 0x80
BaseClass 0x03
Cache Line 0x08
Latency 0x20
Header 0x00
PCI header
Address 0 (memory) 0xC8000000
Address 1 (memory) 0xDFEE0000
Subvendor ID 0x1002
Subsystem ID 0x0003
Int. Line 0xFF
Int. Pin 0x00
Capabilities
Power Management Capability
Offset 50h
Version 1.1
Dump
0 1 2 3 4 5 6 7 8 9 A B C D E F
00 02 10 64 41 87 00 B0 02 00 00 80 03 08 20 00 00
10 08 00 00 C8 00 00 EE DF 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 02 10 03 00
30 00 00 00 00 50 00 00 00 00 00 00 00 FF 00 08 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 01 00 02 06 00 00 00 00 02 50 30 00 1B 02 00 FF
60 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
DMI
DMI BIOS
vendor American Megatrends Inc.
version Version 07.00T
date 04/02/01
DMI System Information
manufacturer Time Computers
product MS-6590
version 1.0
serial 00000000
UUID 00000000-00000000-00000000-00000000
DMI Baseboard
vendor MSI
model MS-6590
revision 1.0
serial 00000000
DMI System Enclosure
manufacturer Uknown Chassis Manufacture
chassis type Desktop
chassis serial 123456890
DMI Processor
manufacturer AMD
model AMD Athlon(tm)
clock speed 1250.0 MHz
FSB speed 100.0 MHz
multiplier 12.5x
DMI Memory Controller
correction 32-bit ECC
Max module size 1024 MBytes
DMI Memory Module
designation DIMM1
size 1024 MBytes (single bank)
DMI Memory Module
designation DIMM2
size 512 MBytes (double bank)
DMI Memory Module
designation DIMM3
DMI Extension Slot
designation PCI1
type PCI
width 32 bits
populated no
DMI Extension Slot
designation PCI2
type PCI
width 32 bits
populated yes
DMI Extension Slot
designation PCI3
type PCI
width 32 bits
populated yes
DMI Extension Slot
designation PCI4
type PCI
width 32 bits
populated yes
DMI Extension Slot
designation PCI5
type PCI
width 32 bits
populated no
DMI Extension Slot
designation PCI6
type PCI
width 32 bits
populated no
DMI Port Connector
designation USB (internal)
designation Def (external)
port type SSA SCSI
connector Mini Centronics
connector DB-25 male
Software
Windows Version Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
DirectX Version 9.0c
Resources
Memory I/O Space, BA=0x00000000E0000000
Memory I/O Space, BA=0x00000000DFFF8000
Port I/O Space, BA=0xEC00
Memory I/O Space, BA=0x00000000DFFF7000
Memory I/O Space, BA=0x00000000DFFF6000
Port I/O Space, BA=0xE800
Port I/O Space, BA=0xE400
Memory I/O Space, BA=0x00000000DFFF5800
Port I/O Space, BA=0xE000
Memory I/O Space, BA=0x00000000DFF90000
Port I/O Space, BA=0xD400
Port I/O Space, BA=0xD800
Port I/O Space, BA=0xDC00
Memory I/O Space, BA=0x00000000DFFF5700
Port I/O Space, BA=0xFC00
Memory I/O Space, BA=0x00000000D0000000
Port I/O Space, BA=0xC800
Memory I/O Space, BA=0x00000000DFEF0000
Memory I/O Space, BA=0x00000000C8000000
Memory I/O Space, BA=0x00000000DFEE0000
Port I/O Space, BA=0x808, size=0x4
Memory I/O Space, BA=0x00000000FEE00000, size=0x1000
Port I/O Space, BA=0x400
Port I/O Space, BA=0x290
Port I/O Space, BA=0x2E@BOSSKILLER and @HenryW
Thanks for the link and info
Unfortunately I don't know the OPN. It's not being reported by any of the half dozen CPU reporting programs I've tried, and I don't really fancy taking the cooling fan off to find it
However I did find out that my CPU is a Thoroughbred Athlon XP. I still don't know the speed, but the MSI CPU list shows that the FSB should either be 133 or 166
I tried using "Fuzzy Logic 4" to set the FSB to 133, but the PC just instantly rebooted. I could try setting it to 166, or setting it in the bios directly, but now I'm afraid I'll either blow it up, or it won't boot and I'll need to blank the CMOS, which I'd prefer to avoid.
Any advice on how to proceed would be appreciated, thanks
Toby -
Hello Everybody !!
I have small problem... Two months ago i bought my fantastic KT4 Ultra... :D I'm very happy of that.
Everything works fine, but my agp PNY Geforce4 Ti 4200 has the sam irq 16 like my integrated C-media 8738MX sound card.
The question is:
Is it bad or not ??? If it is bad, how can I change the IRQ for my Geforce card???? Becauce it is impossible to change IRQ in Windows XP. I know that there is possibility to change IRQ in BIOS, but I dont know what PCI slot is shared with AGP.
I will be very grateful for any help.
My configuration:
Windows XP SP1
MSI KT4 Ultra-B
C-Media 8738MX integrated sound card
PNY Verto Geforce4 Ti 4200 64MB
2 x 256 MB DDR333
Lite On 48/12/48
Maxtor 40 GB Ata 100I had problems with TV cards, had the TV@nywhere and a Leadtek TV2000 XP Delux. I eventually got them both working. Win2k and WinXP disable the control ability of PCI interface which stops you from installing new cards and drivers. I fixed it by
1. First remove any unknow devices in "Device Manager".
2. Run regedit (WinXP) or reget32(Win2K).
3. Check to make sure that "full control" for the profile that you are using i.e. Admin is allowed in KEY_LOCAL_MACHINEsystemControlset001enu mPCI.
3 keys need to be changed to "full control".
Controlset001enumPCI,
Controlset002enumPCI,
CurrentControlsetenumPCI. -
ok well this might be stupid of me to ask..but to me there are no stupid questions.
What is the best way to set up my hard drive and cd rom....can i use ATA 1 master and 1 slave..or do i need to use the ide 1 and ide 2 or how does it work...im just wondering if it would be better for me or should i leave things the way they are....i know this board has 1 ata slot and the harddrive supports ata..so i was just curious.
Specs.
MSI KT4 Ultra SR BIOS V1.3
Athlon XP 1700+ ThouroughBred @1.7ghz 140x12.5=1755Mhz
512 MB DDR PC2100 266Mhz
Gforce Ti 4600 128MB DDR 4xAGP
SoundBlaster Live Gamer 5.1 pci sound card
Maxtor 20Gb HD DiamondMax Plus D740X
Antec SL400 400watt PSUyou don't say what kind of cd-rom you have but anyways...
Set each up as a master on their own channel. If you set them up on the same channel, the channel will only run as fast as the slowest device, thus making your hard drive run slower. -
KT4 Ultra and XP2000 Crashes at 133fsb
My system runs fine at 100fsb with clock multiplier set to 12.5 giving me 1250 Mhz, but when I set my FSB 133 the system crashes. I've tried setting it with the fuzzy logic and in the bios. Each time it resulted in a black screen and I had to short the cmos to get it back.
Also How do you add the system info tag?
KT4 Ultra MS-6590
IBM 60 GB 7200 HD
AMD XP2000 model 6
Thermotake Heavyduty heatsink and fan
256 MB PC2700 Micron
GeForce4 440 64MB video card
L&C PSU Model LC-A350ATX
- 350 MAX
- +5 and +3.3 V Combined 190 wattI have exactly the same problems here, system runs ok at 100fsb, but it isn't on 133.
I was thinking of a cooling problem already so this is clear to me now.
However one problem remains and that concerns the RAID option! Believe me or not, but currently this option is faded out in the BIOS (1.3) and therefore no bootable devices can be discovered also setting the option "Try other bootable devices" to YES does not work. If I start messings with the CMOS settings the RAID option might return after saving the adjustments and rebooting. While booting up the Fastrak376 is either present or gone.
Currently I have just a Matrox G400 MAX in the AGP slot and none of my PCI devices are used. Further two IDE devices (Maxtor 80gig DX740-L) are hooked up, one to SATA (with converter) and the other to PATA so it shouldn't be an IRQ issue.
I already cleared the CMOS using the jumpers and switching " on " the machine, did a NVRAM clearance and that didn't work either. Setting Plug and Play OS to DISABLED worked out once but after making some adjustments to the BIOS settings the RAID disappeared ever since ..
However I was able to install Windows XP once and as you probably can figure it took me two days getting the RAID option to work, apparently another BUG in the KT4? ?(
Unfortunately now I am stuck since no RAID for the time being ... Hope one can help since once again MSI does not respond to my emails... ... :O -
KT4 Ultra and Audigy 2 Problems
After install the CRC Error Bios I been have a probem w/ my sound card. I can now hear the cd-rom run , dvd load , and mouse scolling on my speakers. Also the creative program load painful slow now and the speaker test no longer work when I test the speakers out. The program and speakers were work fine before the CRC Error Bios. Do you know what it could be ?
System Config:
CPU: 2200+ XP
Motherboard: KT4 Ultra-SR
RAM Slot-1: Kingston 333 512 MB CL 2.5
RAM Slot-2: None
RAM Slot-3: None
display card: AIW Radeon 9700
IDE-1M: Western Digital 200 GB SE 8MB
IDE-1S: None
IDE-2M: Samsung 48x-16x-48x CD-R/RW SD-616Q
IDE-2S: Samsung 16X DVD SW-248B
IDE-3: None
SER-1: None
SER-2: None
PCI-1: None
PCI-2: ATI TV Wonder PCI
PCI-3: None
PCI-4: 3com EtherLink 10/100 PCI TX NIC 3c905B-TX
PCI-5: Creative Audigy 2
PCI-6: None
PSU: (Antec AMD Approved 350W)
BIOS revision: 1.3 Beta
Operating System: WIN XP
VIA 4-in-1 drivers : 4.45
other drivers, services or applications might affect the data transfer such as : NoneI just reinstall the driver....
Now the system is crashing. The whole blue screen of death thing. Anytime I click on EAX console it give me an error or crash. What going on???
Maybe you are looking for
-
How to install 32bit Oracle on 64 bit Red Hat4
Hi: I need to install 32bit Oracle 10.2.0.1 on 64bit RedHat4. The reason is NOT the point. I need to do that period. I am sure it can be done even ORacle don't support it. I installed all 32 bit gcc, g++ packages. BEfore I run installer, I do Linux32
-
Cl_gui_frontend_services= gui_download and logical path issue
Hi all!! I'm downloading a table with this class/method, and when i have worked with a LOCAL folder, it worked fine, but now, i need to put the file into a server folder. So i get the logical path in this way: 10.20.xx.xx but when i pass the filen
-
How do I setup magazine to view pages consecutively, but print for double sided 11x17?
I have a quarterly newsletter I've begun. I set it up as (8) 11x17 pages with (2) 8-1/2" x 11" page views per 11x17 page, so that when they print double sided, there are consecutive. The problem is that when I am trying to navigate from page to page
-
Is Buddy API baSetDisplay working in Director 11.5 under Windows 7?
Hello, I'm trying to update some of my old games. The "baSetDisplay" of Buddy API is not working under Windows 7 in Director 11.5 Did someone had made it working? Any solution to change resolution to have a fullscreen game? Thanks Sebastien
-
I installed the trial of Media Encoder CC but cannot find the imx30 preset. Where and how can i find and install this feature.