KT4 Ultra-SR (MS-6590) dont work with AMD Barton 2500+

;( Please help me any1.
I have MBO KT4 Ultra-SR (MS-6590) with CPU AMD Barton 2500+ and i have a big problem. System corectly boot only if a select CPU FSB Clock = 100 MHz (CPU Ration/CPU Vcore/DDR Voltage=all AUTO). When a select CPU FSB Clock 133 or 166 MHz, system begin run corectly and after few second turned OFF. I selecting SDRAM Frequency on=AUTO/266/333/400 MHz but not working. My old CPU is AMD XP Palomino 2100 MHz and work fine with KT4 Ultra MBO. I upgrade BIOS with 1.4 version. I change memory module with PQI (PC 2700/256 MB) and JETRAM (PC 2700/256 MB) but is same ":censored: ". System dont work. Bad CPU Barton 2500+? I dont no. Please help me any1.
My System:
MBO KT4 Ultra-SR (MS-6590)
CPU AMD Barton 2500+ (FSB 333)
Memory DDR Samsung 2x256 MB (PC 3200) K4H56083D-TCC4
Cooler SPIRE WhisperRock IV+Artic Silver 3
HDD Seagate Baracuda 120 GB SATA
PSU Enermax 300W EG301P-VE(FMA)
VGA Saphire ATI Radeon 9100 (64 MB+TV/DVI-out)
DVD-ROM Pioneer 120S (16x speed)
CD-RW MSI CR52-A2 (52/24/52, Atapi)
FDD Teac 1.44 MB
Creative SoundBlaster Live! 5.1

Most of the time, this sort of problems arise because of power suppliy issues.. U have a enamax 300W PSU which is a VERY GOOD PSU but might just be on the line...
If u can, try swapping the PSu for a good 400 or a 420W PSU.. this might solve your enigma.. I really dont think this is your processor...
Read this two articles on PSu wrtten by one moderater which will aid in solve in fixing your problem (PSU1 , PSU2 , Troubleshooting Guide )
Best of luck
RAsika

Similar Messages

MSI KT4 Ultra-SR (MS-6590) And IDE3

Rig is As Follows:
MSI KT4 Ultra-SR (MS-6590)
AMD Athlon 1000Mhz :(
512MB DDR333 (PC2700) x1 stick
MSI GeoForce 4 Ti4200 8)
IDE1: Western Digital 40Gb 5400rpm (win xp pr) as master & Maxtor 80Gb 7200rpm as slave
IDE2: Liteon 52x24x52 CD-RW ) as master & Samsung 12x DVD as slave.
Soundblaster 5.1 Live PCI
350w Power Supply
MSI D-Bracket 2 & S-Breackets Fitted Also.
I have Three Questions.
>My CPU has a FSB of 200, but the bios (version that came with board) shows it as 100 FSB. See here for athlon bus speeds
Is it ok to increase the bus speed without damaging the processor.
>The two brackets that i have fitted (s and d brackets) do not work. Why?
>What are the optimal and settings for my ram (PC2700 512MB DDR) and GFX Card (MSI GF4 TI4200).
>Oh yeah, my CPU is now operating at a higher temp than before (using old K7VZA ECS Mobo) @ 50-55. Is this normal??
Sorry for the n00b questions, it's just that this is the first time iv ever taken my PC to pieces and re-configured it myself :P
Thanks in advance. -RjA

I can help a little 1000MHZ AMD chip=200FSB XP CPUs=266FSB this is CPU speed . AMD 1000MHZ CPU needs to run @100FSB where a XP CPU can run @133FSB This is MEMORY speed . Trying to crank that poor old chip up to anything other than 100 will do you NO good. You need to buy a bigger cpu of the XP kind. A lot of the older XPs can be had for a low price. 50c isn't not super hot. My KT4 runs in the 40s. You might want to think about a bigger cpu cooler to bring the temps down a bit. Most of your settings should be left at system default, since you only have a 1000MHZ CPU. When you go up to an XP then you can make a few changes. Regards BIGDADDY51 :D :D

Spell checking dont working with "Automatic by language" option

Russian spell checking dont working with "Automatic by language" option in Sys. prefs.

Let Apple know at
http://www.apple.com/feedback

Adobe Flash Media Encoder dont work with Easycap usb video capture

Hy...
I installing ADFME 3.2 but it dont work with Easycap usb video capture.
The ADFME crash.
Can you help me?
tks
Marco Aurelio

Hi Kyngg,
Can you advise how you managed to resolve this problem?
I'm having a very similar issue.
Thanks,

KT4 Ultra Bios 1.2 Doesnt Work

I have just updated my Bios to verison 1.2 and the computer wont go into windows.
Infact I have found the problem to be the USB Via chipset thats at fault. I have Windows Me and the the computer freezes every time it tries to load USB.
I have put version 1.1 back on an no problems.
I have reloaded windows and the following error appears.
Windows has had to disable the USB function due to a internal problem.
I try to reload the drivers and it freezes.
I have just spent 8 hours to find the problem was the usb chipset.
Does anyone else have the problem ??
Thanks

I am running a KT4 Ultra with XP2000 Cpu. I updated my bios from 1.1 to 1.2 over the weekend, and now my once stable system is giving me no end of problems.
1, It would not recognise my primary hard drive and I had to clear the bios with the jumper four time before it would let me boot up.
2, Once I booted up and ran 3dmark, it was okay the first time but the second time the machine crashed and totally corrupted my hard drive. I had to reformat my hard drive and load a backup (two weeks old).
3, I have now re-flashed my bios back to 1.1 but although the system is working I keep getting CRC errors when trying to backup my hard drive to my secondary drive. This did not happen before.
This 1.2 bios seems more like a rushed beta version than a real bios update, it has given me loads of problems and I now have a system which is still not working properly. Bios upgrades are supposed to fix problems not create them!!
I would NOT touch this 1.2 with a long barge pole !!!

KT4 Ultra FISR very slow HD & FWire with XPSP1

Any suggestions please.
I used to get 35-45MBytes/s sustained copying 1G video files between drives using win2k sp4.
Then I had to go to XP to support the new 200G boot drive.
Now I get 15MBytes/sec copying files and the firewire runs at 7MBytes/s.
SiSandra says 40200 for the 200G, 26000 for raid 0 array (2x80G on promise pci ultra66).
HD Tach shows the 200G drives as 55MB/s down to 45MB/s & 25MB/s for the firewire.
It has to be a problem with winXP.
Indexing has been turned off.
Motherboard KT4 ULTRA FISR 6590
-Bios 1.4
-CPU AMD XP2800 (1.8GHz)
-Kingston PC2700 2x 512MB
- GeForce FX5600 (8xAGP)
-Hard Drives: all seagate - IDE 0 200G, 200G, IDE 2 nil, IDE 3 (sata) 120G, 80G
IDE 1 DVD Writer & CD ROM,
Promise PCI ULTRA66 Raid 2x 80G
External Firewire 200G & 80G seagates
WIN XP SP1

So yesterday the system stopped dead - wouldn't boot into XP - and all my roms were at home.
So I did a system repair - no gui.
Ran full setup from the rom, got all the way to installing drivers and hang.
Repeat 5 times removing hardware at each step and disabling items in the bios.
Eventually got XP to install with generic PCI video, 1HD, 1 CDROM. No MB
Turned out to be that problematic Broadcom 5702. Had to disable in bios.
And the rom drive crunched my XP disk badly.
Reinstall everything. What a pain.
Still having trouble with that broadcom adapter chipset...
Anyway with the network disabled in bios the firewire now does 15MBytes/sec sustained and Sisandra says my boot partition rates 37000, better than the 12000 previous..

KT4 ultra Agp 3.0 slots compliance with agp 2.0 graphics cards

Ive just bought a KT4 Ultra motherboard and am now looking for a graphics card. What i want to know is what its compliance is like with graphics cards that are agp 2.0 (2x 4x). ive heard different views from web pages some that agp 3.0 is fully backward compliant with 2.0 and others the opposite, whats the score with the KT4 Ultra board, what cards do people know it works fine with. Im looking in the range of GF4 Ti 4200 - 4600. Any info, help or reccomendations on good cards would be appreciated
thanx

any of those cards will work

Logic Pro dont work with ProTools HD3 with XD card and Apogee converter's

My Logic Pro dont want work with ProTools HD3....
I have G5 dual Core with 2 GO Ram, and ProTools HD3 and a Apogee converter's (with XD card extention).
I have in the same comuter Logic Pro 8, and i can't use the DSP of ProTools HD, and the Logic Pro plug-in and Protools HD plug-ins dont want work too.
I contacted Apogee, Digidesign and Apple for this problem, but anyone have the solution....

Hi DMS Debah
I got PT HD 2 and works great here !
TRY this : http://duc.digidesign.com/showthread.php?t=54888
Download this :http://www.digidesign.com/index.cfm?navid=54&itemid=25974
Read this : http://en.440forums.com/forums/lofiversion/index.php/t38958.html
try to change your Logic audio drivers ! you'll see there is(select it ) DAE
driver, TDM option and Core audio driver! You have to chose DAE driver then
reboot the logic Pro then it will work
Best,
u
PS : Si tu ne peux pas le faire on va réessayer
Message was edited by: jannhewi
Message was edited by: jannhewi

Apple tv 2 dont work with thomson tv after update??

After an update my apple tv don work with my Thomson tv anymore, when i choose the HDMI on my tv, the led light goes out on the Apple tv , and the tv say no signal , i have 2 thomson tv and both are doing the same thing, om my philips tv the apple tv works???!!!
Patrik

I assume it's a straight HDMI connection. Have you tried connecting to iTunes (via micro usb) and doing a restore? If that doesn't work it may be hardware related, in which case you should take the unit in.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

How come almost all complete themes dont work with ver. 30.0 can a get a ver. that will work with them?

looking through the "complete themes" and almost all of them say " not available for firefox 30.0 " i guess that what ver. i have i thought i had the newer version and would think theese theme's would work with it is there somewhere else to look for more complete themes or another ver. i can download that will make it work with these theme's???
-dave email-" [email protected] "

As of Firefox 29.0 and newer the Complete Themes that were made for old UI in Firefox 28.0 and earlier really needs to be updated.
Some examples.
*https://addons.mozilla.org/en-US/firefox/addon/nasa-night-launch/
*https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-tiger-sp/
*https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-tiger/
*https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-graphite/
*https://addons.mozilla.org/en-US/firefox/addon/ft-deepdark/
https://addons.mozilla.org/en-US/firefox/complete-themes/?sort=updated
and on the Theme page you can scroll down and click on Version Information.

Fixed Layout EPUB, Buttons dont work with Adobe Digital Editions

Hello Community,
I am working with InDesign CC 2014.1 and Adobe Digital Editions 4 (ADE).
I am developing a FXL epub. When viewing the exported epub with ADE the buttons don't work.
I also tried to view other epubs as the one mentioned in this thread: https://forums.adobe.com/thread/1684411
No animations work.
can someone help me with this problem?
Thanks in advance.
Stephan

ADE is not a very good FXL EPUB reader. Try iBooks, Readium for Chrome or Kobo.

Lenovo G565 dont work with SATA II ?....BIOS limited ?

I bought the lenovo G565.
But that does not support SATA II?
My Hitachi SATA HD in SATA II works in SATA I !
The BIOS limits the use of SATA?
With SiSoft Sandra software is that the motherboard can work with SATA III !
chipset installed : AMD RS780/880
CPU Phenom II triple-core N830
Bios upgrade ?
Thank.

i don't think bios update will solve your issue. it's about hardware support and it seems your g565 doesn't support sata 2 interface.

Amconsole dont work with virtual domains

hi!
i have a multi-homed environment (virtual domains). if i use the main domain i can access /amconsole without any problem, but if i try with any additional domain i receive an error message "Unkown domain". i've followed all steps for configuring multi-homed and it works with mail, calendar, etc.
any hints?

hi!
i have a multi-homed environment (virtual domains). if i use the main domain i can access /amconsole without any problem, but if i try with any additional domain i receive an error message "Unkown domain". i've followed all steps for configuring multi-homed and it works with mail, calendar, etc.
any hints?

Can my Laptop Work With amd r7 260x

I have a HP 2000 Notebook PC and i cant play new gen games without lagging.
My PC info i think.
And the Graphic Card
Please help me before i buy i need to know if it works with my Laptop

When requesting assistance, please provide the complete model name and product number (p/n) of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please see How Do I Find My Model Number or Product Number? for more assistance locating this information. DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
1st) Most laptops use integrated graphics or discrete graphics solutions that are part of the system board and cannot be changed.
2nd) You linked to desktop graphics which cannot be used in any laptop computer.
Basically, you can't upgraded the graphics in your laptop and trying to do so is a waste of time and money.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

DOES THESE MEMORYS WORK WITH AMD

Hi all,
My question is does these memory rams work with this motherboard?
MSI 990FXA GD65 - THE MEMORY IS: Corsair Vengeance 16Gb, cl7
CML16GX3M4x1600C7
I have the AMD FX 8150 Processor
I hope someone can help rightaway with this.
thank you
regards,
Ritmo

Quote from: ritmo on 06-May-13, 20:51:42
My question is does these memory rams work with this motherboard?
THE MEMORY IS: Corsair Vengeance 16Gb, cl7 CML16GX3M4x1600C7
I have the AMD FX 8150 Processor
Tech Spec: Capacity16GB (4 x 4GB) Speed DDR3 1600 (PC3 12800) Cas Latency 7 Timing 7-8-8-24 Voltage 1.5V Quad Channel Kit
Features: 16GB (4x4GB) DDR3 for AMD, Intel Dual processors
Tested Voltage 1.5, SPD Voltage 1.5, Speed Rating PC3-12800 (1600MHz), SPD Speed 1333MHz, Tested Speed 1600Mhz, Tested Latency 7-8-8-24, SPD Latency 9-9-9-24

KT4 Ultra-SR (MS-6590) dont work with AMD Barton 2500+

Similar Messages

Maybe you are looking for