Kt400 PCR file link in KT4 UnOfficial FAQ is dead

The link to download the KT400 pcr file is dead . Follow it through to the very end and you'll see the kt400 pcr file errors outs. Please fix or remove the link in the FAQ.
If you do fix the above link maybe think of including a link to the wpcrset program as hoda not longer supports it and has removed the link from his site.

There is nothing to fix as nothing wrong with those links. KT400 PCR is still downloadable.
Read the FAQ carefully I only put link to WPCREDIT and NOT WPCRSET.  Furthermore the author H.oda has no longer support it. The link for this unsupported tool is left for the adventurous users to find out. :D

Similar Messages

  • NEO Boards Unofficial FAQ rev 4/05/2004 - two lights on "P" series

    Hi all,
    I'll start maintaining this Unofficial FAQ for the NEO boards. The contents of this FAQ are compiled from this forum, user's posted problems, usage issues, compatibility issues reported on the net etc. However, MSI does not responsible for the validity of this FAQ. Please take note.
    1. BIOS
    Q: I flashed the BIOS and caused my motherboard dead. Can I RMA the board?
    A: This does not happen easily. Please be sure you follow the BIOS flashing instruction and wait for the BIOS flashing process to be fully completed before you restart the PC.
    If this problem is caused by the recent bios 1.3 for the Intel875 ( MS6758 ) chipset, then he could ask for RMA from MSI Branch offices for Free.
    If not caused by the 1.3 BIOS, they can still go through the normal RMA process. Please check with MSI branches.
    Q: What is the MSI statement for the bad BIOS flash?
    YES. This is the statement :Quote
    When you update the bios to v1.4 using the latest flash utility, it will show "Erasing Done and then Programming Done". But actually the process has not been finished yet, you will need to wait about 30 seconds and then the message of "Flash Complete..." is showing up, this will complete the flash process.
    By doing this, end user will assume when it display "Programming Done" message, it has complete the flash process which is wrong. We need to wait until the "Flash Complete..." message has displayed on the screen in order for completing the flash process.
    By any chance we can remove the message of "Programming Done" and only prompt for "Flash Complete..." so customer will not turn off the system or reboot the system when they see "Programming Done" message pop on the screen?
    The new version ADSFI708.EXE has fixed this issue. When you finish the BIOS , it will show the "Verifying the ROM data now" message before it showed up the "Flash Complete".
    In short, use ADSFI708.EXE to flash the BIOS.
    [/color]
    Q: Where can I get beta BIOS?
    MSI do not support beta BIOS. Use at your own risk. Under special condition such as hardware incompatibility issues and a beta BIOS is a feasible resolution, please post in the forum and let the mods arrange for you.
    Latest BIOS:
    Released:
    875P Neo : 1.9
    865PE Neo2 : 1.9
    865PE Neo2-PS : 3.3 New![/B]
    beta BIOS:
    875P Neo : 1.9B6 link1 [Thanks to FlyTSI for hosting]
    History: NO INFO PROVIDED FOR 1.9B6
    865PE Neo2 : 2.01B link [thanks to FlyTSI]
    History:Support Extreme OSB logo. Display L3 cache. Support Prescott cpu & update microcode. Modify Prescott ratio programming.
    DO NOT APPROACH THE MODS FOR BETA BIOS! WE DO NOT DISTRIBUTE BETA BIOS!!
    Q: What is the best BIOS setting for my board?
    A: The optimal BIOS setting is different for each system. It's recommended to read more about the BIOS settings, from the board's manual, and some good guides like this : link.
    2. Overclocking
    Q:I cannot overclock my system. Can MSI update the BIOS so I can overclock?
    A: This board can overclock, but overclocking depends on the peripherals that you are using like memory, CPU, heatsink etc.
    Q: Which board has Dynamic Overclocking Technology?
    A: Currently only 865PE Neo2-FIS2R
    Q: How to disable dynamic overclocking?
    A:Yes, you can disable Dynamic clocking directly in the bios setup.
    3. CoreCell Technology
    Q: which product has CoreCell technology built-in?
    A: 875P Neo (MS-6758), 865GE Neo2 (MS-6728) & 865PE Neo2 (MS-6728)
    Q: Can I assume that boards with CoreCell chip to have D.O.T ?
    NO
    Q: Where are the locations of temperature sensors?
    CPU - taken directly from CPU pin (same as AMD thermal pin.
    System - RT2 (near winbond I/O) same for 875/865 series boards.
    4. RAM
    Q: I have this RAM xxxx but it does not work with my board. Can MSI update the BIOS to fix this?
    A: We would suggest you to use the MSI recommended memory for this part as there are a lot of memory brands out there we can't guarantee that all will work with the MB. Please go to the Product Info page, click "Test Report" and choose "Memory Modules".
    For example, 875P : Here and select Memory Modules.  
    Q: My RAM performance is slow, the benchmark software such as PC Mark, Sisoft etc results are below par compared to other brands. WHY?
    A: This issue has been identified. New BIOS update has fixed this problem. Please update to the latest BIOS.
    Q: Is there any workaround?
    A: There are users here share valueable information of how they tweak their BIOS to achieve good results. Kudos to them! :D Take a look at this link.
    Q: What is MAT?
    Memory Acceleration Technology. More to read here! Please read all to get the whole idea. You should have the idea what actually it is. :D
    Q: Why my Neo2-S/LS doesn't have MAT?!
    GOOD NEWS!! After first week of July, the new BIOS release will enable MAT in all Neo2 boards!
    Q: What about DOT?
    OK. Here is the answer:
    Additional Info for MAT support:
    MS-6728 BIOS V1.3 (All 865PE will support)
    (Note: No MAT option for 865G due to limitation) Though the 865G have no support for MAT but if you insert AGP VGA card, you could still avail of this function!!
    DOT support:
    MS-6728, for exist boards, only full version supports it
    Q: I want to have both MAT and DOT, can I do that?
    Of course you can. However, the amount of setting you can used would depend on your current configurations. The suggested stable configuration if MAT as Fast & DOT as Captain
    Q: Then what is PAT?
    This is what I found in the forum, written by Assaf.
    Quote
    Here's what I understand about PAT.
    As you may or may not know adding pipline stages to any execution unit will allow you to run it at a higher frequency but it will increase the latancy from start to end (measured in clock pulses).
    Now, in order to ensure reliable operation at 800MHz FSB intel added 2 pipline stages to the memory controller (as based on the original dual memory controller in the E7205 chipset)
    This they called i865PE and it will only put into action these 2 stages when 800MHz FSB is applied (which it needs the bios to tell it is the case)
    Intel take the better yealdes of 865PE and validate them for 800MHz with the 2 extra stages disabled.
    These they call 875P.
    A 875P bios with PAT enabled simply does not "tell" the chipset it it running at 800MHz so the extra stages are inactive thus reducing latancy relative to a situation where these stages were activated.
    A hacked 865PE bios will simply follow the 875P bios rule of not notifing the chipset it is running at 800MHz.
    PAT is not an optimization, it's a de-un-optimization
    [/color]
    Q: Can 875P/865PE boards support DDR266 RAM for 800MHz FSB CPU?
    Yes, although the product webpage did not highlight DDR266.
    Q: My Kingston HyperX RAM always cause errors with 875/865 board!
    Known issue. Please read here: http://www.kingston.com/support/faqs/memory/intel_3.asp
    Q: My system does not run stably with DDR400
    A: Set DDR Voltage to 2.7V and above for DDR400, regardless what the RAM manufacturer advertised.
    Q: How to set different FSB:DDR ratio? I can't find in the BIOS
    The FSB:DDR ratio can be changed by setting DDR Clock [266,333,400,500,533]. However, your processor's default FSB will affect the ratio. Follow this table:
    FSB DDR ratio
    133 266 1:1
    133 333 4:5
    133 400 2:3
    133 466 -
    133 500 -
    133 533 -
    200 266 3:2
    200 333 5:4
    200 400 1:1
    200 466 -
    200 500 4:5
    200 533 3:4
    If you have 800FSB (200Mhz) CPU, use FSB200 table. If you have 533FSB (133MHz) CPU, use FSB133 table to get the ratio. Ratio "-" is not available and out of chipset limit.
    Examples:
    1. DDR400 overclock P4 2.4GHz to 3.0GHz. Ratio 5:4. FSB:250MHz. DDR Clock : 333MHz
    2. DDR333 overclock P4 2.4GHz to 3.0GHz. Ratio 3:2. FSB:250MHz. DDR Clock : 266MHz
    3. DDR500 Pr default. Ratio 4:5. FSB:200MHz. DDR Clock: 500MHz.
    5. HDDs
    Q: Can Promise RAID support 2 PATA + 2 SATA = total of 4 HDDs for a single RAID array? RAID-0? RAID-1? RAID-0+1?
    Yes, Promise RAID support 2 PATA + 2 SATA (RAID-0 or RAID-1 or RAID-0+1)
    Q: Does ICH5R's SATA controller support RAID?
    Yes, but only ICH5R, not ICH5. Update: MSI has released beta BIOS 1.81B with ICH5R RAID-1 support. Check the link above in the BIOS section.
    Q: My HDD LED doesn't lit!!!
    As what I have been told that the HDD LED only lit when there are activities in IDE Primary and Secondary channels. No support for ICH5's SATA and/or Promise SATA activities yet. In other words, the HDD LED will not lit and indicate any activities for your SATA drives.
    Q: What is SATA? What is PATA?
    SATA = Serial ATA. There was no such "PATA" acronym before. After Serial ATA appeared, people started to find IDE as opposing to Serial ATA, and hence called IDE as "Parallel ATA" or PATA.
    Q: I enable SATA in BIOS but I didn't see any SATA Controller listed in the Device Manager!
    You will see two sets of IDE ATA/ATAPI Controllers - Intel 82801EB Ultra ATA Controller x2, Primary IDE Channel x2, Secondary IDE Channel x2. That's how Windows installed the drivers.
    Q: How should I install my HDD for RAID configuration?
    Note that the Promise RAID controller only controls IDE-3, SER-3 and SER-4 ports. Make sure you have your HDDs connected to these ports. Make sure you have enabled "Onboard Promise IDE" in the BIOS. Then after the POST screen, press CTRL-F once prompted and go to the RAID setup screen to setup your RAID configuration.
    While the ICH5R controls IDE-1, IDE-2, SER-1 and SER-2. For ICH5R, only SER-1 and SER-2 can be set as RAID. So make sure your SATA HDDs are connected to SER-1 and SER-2. But make sure you have enabled "Configure SATA as RAID" in the BIOS. After the POST screen, press CTRL-I once prompted and go to the ICH5R RAID setup screen to setup your RAID configuration.
    For more comprehensive RAID setup guide, please read this guide written by vango44. Great contribution!!
    Q: My SATA HDD always gives me errors, data corruptions and can't boot!!
    Check the SATA HDD's bridge chip with a "M" logo, the chip build has to be B5P and above, not B2P/B3P which are known to be buggy. B4P is OK but B5P is better. Maxtor and Western Digital SATA HDDs are known to use this bridge chip. Seagate Barracuda V uses different bridge chip and does not make that much problems compared to Maxtor's. RMA the HDDs if possible. MSI is working on the BIOS to fix this incompatible issues. Get BIOS 1.9B3 or 1.6B2 or above. I have seen around October 2003 that Western Digital HDDs come with B5P bridge chip.  
    Q: I want to use IDE3 for normal HDD, non-RAID
    Set this in the BIOS under Integrated Peripherals:
    Onboard Promise IDE : As SATA
    Q: What is Legacy mode and what is Native mode?
    Legacy mode uses 14 and 15 IRQs. Legacy mode can support up to 2 IDE channels, each IRQ for each channel, which means it can support 2 SATA, or 2 SATA + 2 PATA or 4 PATA. Legacy mode also works comfortably with most OSes including Linux.
    Native mode means you may use all available IRQs and can support up to 2 SATA and 4 PATA. Native mode may have issues working with some OSes such as Win9x and Linux, especially on IRQ assignments.If you have Win98/ME, use Legacy mode only!
    Q: How to enable both SATA and PATA?
    You can use both Legacy mode and Native mode, depending on how many devices you use as described above.
    For Legacy Mode:
    ATA Configuration: PATA+SATA
    S-ATA Keep Enabled: Yes
    P-ATA Keep Enabled: Yes
    PATA Channel Selection: Both
    Combined Mode Operation: PATA First/SATA First, depending on which you want to act as 1st Channel.
    S-ATA Ports Definition: P0-1st/P1-2nd or P0-3rd/P1-4th, depending on which you want to act as Master.
    For Native Mode:
    ATA Configuration: SATA Only or PATA only, depending on which you want to be the FIRST BOOT device!
    S-ATA Keep Enabled: Yes if you chose PATA only
    P-ATA Keep Enabled: Yes if you chose SATA Only
    PATA Channel Selection: Both
    Combined Mode Operation: PATA First/SATA First, depending on which you want to act as 1st Channel.
    S-ATA Ports Definition: - P0-1st/P1-2nd or P0-3rd/P1-4th, depending on which you want to act as Master.
    Q: What is S-ATA Ports Definition?
    There are two options: P0-1st/P1-2nd and P0-3rd/P1-4th. If you choose P0-1st/P1-2nd, your Port-0 S-ATA (SER-1) will become the 1st IDE Master, ie IDE-1 Master. and Port-1 S-ATA (SER-2) will become 2nd IDE Master. If you plan to boot with SATA HDD, it's recommended to set to P0-1st/P1-2nd. If you plan to boot with PATA HDD, it's recommended to set to P0-3rd/P1-4th.
    Q: When I enable SATA+PATA mode, why only IDE-1 or IDE-2 can be used?
    If you chose "SATA 1st Channel", IDE-1 will be dropped. If you chose "PATA 1st Channel", IDE-2 will be dropped.
    Q: I want my SATA to be the 1st IDE drive in Legacy Mode along with PATA, how?
    Set this:
    ATA Configuration: PATA+SATA
    S-ATA Keep Enabled: don't care
    P-ATA Keep Enabled: don't care
    PATA Channel Selection: don't care
    Combined Mode Operation: SATA 1st Channel
    S-ATA Ports Definition: P0-1st/P1-2nd
    With this configuration, you can have your SER-1 and SER-2 act as IDE-1 master and slave. But you can only connect your PATA drives on IDE-2 slot.
    Q: I am a noob, I want more details.
    More info? here
    Q: How to support 250GB HDD? Windows only sees up to 134GB.
    Follow this instruction: here for Win2000 and WinXP.
    Q: I've installed a new SATA HDD, I can find it in Device Manager but it doesn't appear in Windows Explorer at all! HELP!!
    You need to format the HDD, not just SATA but also PATA HDD then only Windows Explorer can see it and assign it with a drive letter. To format a HDD, right click on My Computer, select Manage, look for Disk Management. You should see a no-drive-letter unformatted drive there in the list. Get it formatted by right click on it and choose the obvious option there is.
    6. Onboard Sound
    Q: My onboard sound lost after I overclock the system!
    Goto BIOS setup and lock AGP/PCI to 67/33.
    7. Universal Serial Bus [Thanks to Danny for contribution]
    Q: Why doesn't my board have USB2 ports?
    A: The ICH5 and ICH5R chipsets support up to 8 USB2 ports. Under Windows XP when you view your USB settings using Device Manager you will see 4 Intel 82801EB USB Universal Host Controllers and 1 Intel 82801EB USB2 Enhanced Host Controller; Windows 2000 is similar, you are looking for "Enhanced". If you don't see "Enhanced" you need to install SP1 for XP or the latest service pack for W2K. If you have these service packs installed and still don't see enhanced, used the Device Manager to remove the 5 controllers and reboot to allow Windows to correctly install the right drivers.
    Q: If I have 8 USB2 ports, why does Sandra tell me they are USB1.1?
    A: When lower speed devices are plugged in, or high speed devices are plugged in without USB2 operating system support, they are routed to the low speed host controllers. High speed devices are routed directly to the Enhanced host controller when operating system support exists.
    Base on http://www.intel.com/design/chipsets/manuals/29865602.pdf
    8. CPU - contributed by Danny!  :biggthumbsup:
    Q: I have an 800 FSB Pentium 4 CPU, but the bios is set for 200! If I set it to 800 it crashes! What is wrong?
    A: The FSB rating of the CPU is 4 times the FSB rating of the motherboard. To quote Intel: "This is accomplished through a physical signaling scheme of quad pumping the data transfers over a 200 MHz clocked system bus and a buffering scheme allowing for sustained 800 MHz data transfers." So valid settings are 100 for a 400FSB CPU, 133 for a 533FSB CPU and 200 for an 800FSB CPU.
    Q: The Windows task manager and the Device Manager show I have two CPU's. What's wrong?
    A: Your CPU is a model that has Hyperthreading technology and it is enabled in the bios. To quote Intel: "It allows software programs to "see" two processors and work more efficiently. This new technology enables the processor to execute two series, or threads, of instructions at the same time, thereby improving performance and system responsiveness."
    Q: Do these boards support Prescott CPU?
    Update: Prescott spec is not finalized. There might be more requirements needed other than meeting FMB guideline. It is hard to say if current motherboards can fully support it. [/color]
    This is the latest info from MSI. Check this link here
    9. Power Management
    Q: What are S1/POS and S3/STR modes?
    S1/POS = Power On Suspend, nothing turn off just that everything is running in extremely slow.
    S3/STR = Suspend to RAM, PSU only powers 5V_STBY to the board for RAM refreshing, the rest all off.
    Additionally,
    S4 = Suspend to Disk. Win2k/XP calls it "Hibernation" mode. In this mode, the RAM and CPU state images are copied into the HDD. After S4 mode, you can safely remove the power cord.
    S5 = Soft Off. PSU still supplies 5V_STBY.
    G3 = mechanical off. No power at all to the board.
    Q: Where to set the standby modes?
    For S1 and S3, you can set the standby mode to either S1 or S3, not both, in the BIOS. Note that Windows cannot choose which standby mode to run. You have to set it in the BIOS.
    For S4, you can only set it in Windows 2k/XP (and ME, but not 98).
    10. Others
    Q: I have MSI FX5900 which has double sided fans, can it fit in the board?
    Most boards can fit the FX5900. Including, the NEOs' MS-6728, MS-6758, and others like KT4A ultra, MS6777 Nvidia board.
    Q: Why my NB Temp value is always stay the same?
    On 875P Neo and 865PE Neo2, there is no NB temp sensor! The value you read from CoreCenter does not mean anything. Please update to the latest CoreCenter.
    Q. What are the two lights on my "P" series board for?
    A. These are the Overclock Signal Lights:
    1. Green, Green: Both AGP and CPU are dynamic overclocking.
    2. Green, Red: The memory is overclocking to 533MHz.
    3. Red, Green: The external frequency is overclocking to 350MHz, and the frequency between the north bridge and CPU is 1400MHz.
    4. Red, Red: CPU is dynamic overclocking now.
    There are more to come soon. Please do not reply or request for FAQ contents in this thread. The FAQ will be picked up from the popular threads. Thanks.
    Update History:
    6/23/2003 : Added onboard sound lost fix
    6/25/2003 : Added HDD LED
    6/26/2003 : GOOD NEWS!! MAT to be available in all Neo2 boards!
    6/27/2003 : SATA, PATA
    7/1/2003 : 865G MAT support!!
    7/7/2003 : MAT + DOT support
    7/7/2003 : Prescott CPU support
    7/7/2003 : DDR266 RAM support for 800MHz FSB CPU
    7/17/2003 : Prescott CPU support UPDATED
    7/18/2003 : SATA & PATA updated
    8/15/2003 : latest BIOS updates
    8/15/2003 : RAID-1 support for ICH5R
    8/16/2003 : RAID configuration
    9/02/2003 : beta BIOS updates - 1.81B
    9/03/2003 : beta BIOS update for 865 - 1.52B
    10/03/2003 : beta BIOS update for 875 - 1.9B3
    10/06/2003 : beta BIOS update for 865 - 1.6B2
    10/08/2003 : beta BIOS update for 865 - 1.7B1 link provided
    10/13/2003 : minor updates on old issues
    10/16/2003 : NB temp sensor?
    10/19/2003 : Promise IDE3 for non-RAID function
    10/20/2003 : Prescott updates
    10/21/2003 : FSB:DDR ratio
    11/21/2003 : Legacy, Native mode, SATA+PATA Configuration
    12/01/2003 : BIOS 1.9B6 for 875P
    12/15/2003 : Prescott Support, 250GB HDD support, BIOS 1.9 FINAL
    1/11/2004 : BIOS 2.01B for 865PE Neo2, BIOS 3.30 for 865PE Neo2-P
    1/12/2004 : USB 2.0 [thanks to Danny for contribution]
    1/26/2004 : SATA + PATA Revisited
    1/26/2004 : Added 8. CPU [contributed by Danny]
    1/27/2004 : Added formatting SATA HDD in WinXP
    1/28/2004 : updated on SATA+PATA and links with Danny, Vango44 and Uruk Hai's contributions  :biggthumbsup:
    1/28/2004 : Added power management
    04/05/2004 : Added two lights on "P" series boards  [Danny]

    Dear [Maesus],
    I have tried to duplicate the issue, I saw it only once when I reflash the BIOS and then change the CPU clock setting.
    My procedure as below…
    1.      Boot system
    2.      Update BIOS to 1.9 version
    3.      Restart the system to BIOS setting
    4.      Change the CPU Bus Clock to 229
    5.      Save the setting & exit and then the system restart automatically
    6.      And then I saw the CPU is only running 1.86GHz (my CPU is 3.2GHZ FSB 800MHz)
    But I would like to explain that my procedure as above is incorrect.
    The correct procedure should be as below….
    1.      Boot system
    2.      Update BIOS to 1.9 version
    3.      Restart the system to BIOS setting
    4.      Load BIOS setup default first
    5.      Change the CPU Bus Clock to 229
    6.      Save the setting & exit and then the system restart automatically
    7.      And then I saw the CPU is running 3.66GHz (my CPU is 3.2GHZ FSB 800MHz)
    Note: To load BIOS setup default setting after reflash BIOS that is because all original default setting will be erase after upgrade BIOS. So we always recommend customers to load BIOS default setting first before change any BIOS setting.
    BTW, we have updated the BIOS version to support Prescott CPU. Users can decide to update it or not.
    The new release BIOS as attach file.
    Best regard!
    [MSI Staff]

  • Multiple file links in a single page: A better way to/efficient way to handle ?

    Aloha Everyone!
    I would like to ask the community how they have handled multiple file links in a single page. Sort of a pseudo database of files.
    Here is the webpage I have been working on:http://huichawaii.org/
    Here is what I have done to show files so far:
    old version:http://huichawaii.org/proceedings---2012-education%2c-math---engineering-technology.html
    new version: http://huichawaii.org/ahs2013-proceedings.html
    The website works best in Chrom or Firefox, still have to convert the flash header to an edge animate .
    Mahalo in advance for everyone's input!

    Depending on what other text you might have, you could use the data list component.
    To get the text to have underlines, you will need to edit the repeated item. You can also adjust colors and fonts as well. The default rollover and selected states will probably not be the UI that want, so make sure you change those as well.
    Now for the interactivity, select the datalist, and use the interactions panel, choose "On Select", then "Go To Url", the trick is to make sure the "When a specific item is selected" is also set. Here are the basic settings to get your links working:
    Add new interactions for each item you want to be functional.

  • File link not working on Adobe 8.0

    Hi,
    on Adobe Acrobat 8.0 the File link does not work. For example if I have in the pdf the link: c:\daten\info.doc, I can't open this link. If it is a Weblink then it is working. The customer told me that was working in Adobe6????
    On my PC it does also not work!
    Thanks a lot!

    Hi,
    the customer uses the Adobe Acrobat 8.1.2 Standard and Acrobat Distiller 8.0 Postscript 3016102. I did print to pdf with adobe.
    I have all printscreens on a file, if you need more info!
    I did create on customers PC a new Winword document and printed ou as a pdf. Weblinks are working, File UNC File not.
    I have all Printscreens on a File, you can have it if you like (but i need Filelink or eMailadress?)
    Thanks for your help!
    Werner

  • Can't open pdf file linked through a ASPX link in Safari

    I'm a new Mac user so sorry if this is basic. It appears when I click on a link in Safari that should open a PDF file (link uses a ASP link) I get the download box instead. I can download the file to my desktop and open it with adobe from there. I just downloaded the latest adobe reader. This is a new intel iMac (10.4.8). If I click directly on a link to a PDF file it opens in Safari with no problem. The specific link I'm having trouble with is :
    http://www.rochester.k12.mi.us/download.aspx?ft=MzAwMTV8fHwyNC4xOTIuMTM5LjE4NXx8 MS8yLzIwMDcgODo0OTozNyBQTQ%3D%3D
    It seems to see the file as having a ".pdf.exe" extension so doesn't open it with adobe but sees it as an application so offers to download or cancel.
    Really clicking on any PDF link from this page causes the same problem : http://www.rochester.k12.mi.us/index.asp?folder=15700&name=Physical%20Science
    These links act OK using IE. Any suggestions would be appreciated.
    Thanks...Jim

    Sorry for the insufficient info.
    My environment is Windows 7 64bit.
    The PDF was converted from Word file and for example the link which should open a local file was working on version 10.1.1.33 (like first picture below) but not anymore after updating to 10.1.4(second one).
    Can you help me with this?

  • No longer able to follow local file links.

    In previous versions of firefox ( 28 and Earlier ) I was able to follow local file links by whitelisting them in the user preferences file as shown here: http://kb.mozillazine.org/Links_to_local_pages_do_not_work
    This functionality has ceased to work with the update.

    You might find a similar bug already posted, but if not, sure, others are going to have the issue.
    I guess one question is implementation. What mechanism is replacing capability preferences? If there isn't something that general purpose, what kind of site-level permission could be relevant?
    And if the need is not clear, what are the use cases for http:// to file:// access that the developers need to consider? Or is it for file:// to file:// access that's most critical?

  • Issue with opening PDF file link from Safari

    Hi Everyone,
    I got a problem with opening PDF file link from Safari 4.04. Instead of getting a normal pdf content, it shows some weird characters. Not sure it is something wrong with Adobe Reader Plugin or Safari?
    I have uploaded a screenshot of the issue in the adobe forum (http://forums.adobe.com/thread/531870). Please help!
    Many Thanks,
    John

    There's nothing wrong, except the fact that you have Adobe Reader installed. You don't need it, so get rid of it; it will only cause problems with Safari. What you're seeing is the contents of the PDF file, rather than having it displayed.
    If you want to download a PDF file, you can either Control-click on the link and choose "Download Linked File As…", or you can Option-click on the link for the file and it will be downloaded to your Download folder (usually your Desktop).
    If you want to view a PDF file in Safari, you don't need Adobe Reader; Safari is perfectly capable of doing this by itself and has been for years. Adobe Reader will only get in the way and slow everything down.

  • Network and 'file:///' links do not open after upd...

    In older versions of Skype we could use links like:
    file:///C:/Users/Dmitry/Pictures/CloudShot/shot_150228_130027.png
    \\m1fsg1.msk\share\AT\F1\ScreenShots\shot_150227_172758.jpg
    After major update (version with new UI) these links doesn't anymore =(
    'file:\\\' links are not even highlighted anymore, netwok links are highligted but not working either. See image below with URL samples:
    Is there soluiton for that?

    Possibly a result of using a different home page, I use my own home page and have not seen any difference in regards links opening within the same tab, another tab, or another window in conversion from Firefox 3.6.17 to Firefox 4.0.1
    Generally you would have your Tools > Options > Tabs set up to open New Windows in New Tabs instead. You would have Google open links in a New Window which equates then to a new tab (but the same new tab each time).
    You can change your settings for Google searches at the top of a Google search results page "Search Settings". Stored in cookies or at Google, you may have to set up separately for logged in and not logged in to Google.
    Did you have extensions to work with Google, they may not work anymore, check them out carefully. "Google Optimizer", "Optimize Google" both no good to me, but I can use "Google Enhancer" and "Adblock Plus" to do what those did for me.
    These are options for Tabs that I have that differ from the default,
    * |browser.tabs.closeButtons| 3|
    * |browser.tabs.closeWindowWithLastTab| false|
    * |browser.tabs.insertRelatedAfterCurrent| false|
    * |browser.tabs.loadFolderAndReplace| false|
    * |browser.tabs.loadGroup| 0|
    * |browser.tabs.loadInBackground| false|
    * |browser.tabs.loadOnNewTab| 1|
    * |browser.tabs.openinnewtab| true
    * |browser.tabs.tabClipWidth| 5|
    * |browser.tabs.tabMinWidth| 0|
    you can check them out in
    * http://kb.mozillazine.org/About:config_entries and in
    * http://dmcritchie.mvps.org/firefox/tabs_config.htm

  • File Links in PDF getting messed up when viewed in browser

    When we put a file link in a PDF (\\servername\sharename\directory\file.doc) and display that PDF in a browser, when we click on that link, it becomes http://webname/servername/sharename/directory/file.doc which does not work at all.
    I have tried the current versions of Reader 8 and 9, as well as an old copy of 6.1 in browsers ID6/7/8 and Firefox 3.5.
    Our web unit insists that it didn't used to do this.
    If I change the Reader option to not open inside the web browser, then clicking on the file link works fine. It's just when Reader opens up in the browser that we have this problem.
    Anyone else run into this? Our folks really like Reader inside of the browser.
    Thanks.

    This is a post for Adobe Acrobat, not Adobe Reader as it is a functionality issue with Acrobat.  It is peculiar, I am having the same problem when I save the file to a local Windows Home Server.
    I have a link called file://whsservername/foldername and it becomes file://whsservername/foldernamewherepdfislocated////whsservername/foldername which is totally convoluted.  I am trying to research a solution for this but if anyone else knows what settings to change in Acrobat that would be a great help to post.
    -markerline

  • Can you trace which Indesign files link to a specifik image?

    I have an image database, that multiple Indesign files link to.
    I am not the original author of the Indesign files nor the image database, so I have no overview of how many Indesign files links to each image.
    And now I have an image I would like to make a change in - but I am afraid to do so, when I do not know in which Indesign files the image is used.
    So my question is - is there a way to track links made to a specific image in any Adobe programme?

    May be Flow could do the trick for you....?
    http://indesignsecrets.com/let-the-good-times-flow.php
    ps. I have not used it myself, so I really can´t say if it solves your problem....

  • File Link Framemaker option not available, plz assist...

    All-
    (Also posted in RoboHelp HTML forum. Redoing in this forum since it seems topical.)
    On my new Robhelp 8 HTML  installation, I can't see the File>Link>Framemaker option, just  File>Link>Word Document. Is there something I have to do to enable  the Framemaker option?
    Interestingly, on another computer  with a trial copy of Robohelp 8, I DO see the Framemaker option. Not  sure why I shouldn't with the new install.
    Please assist.
    Thanks in advance.
    -Kurt

    Hi there
    I think one of the issues at play here deals with security and Adobe protecting their assets. There are mechnasims in place that prevent a user from repeatedly installing a trial over and over and over, therefore having a never ending "free trial" period. And it would appear that this may be somewhat at play in an odd way when the trial has been installed and perhaps now you are installing the trial of TCS.
    Just sort of thinking out loud.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcererStone Blog
    RoboHelp eBooks

  • ANN 1-hr webinars: Buttons for PDF Navigation/ Interactive Checklists/ Cross-File Links & Bookmarks

    Free; no fluff, no hype, no nonsense; starting 9am PDT
    • Creating Buttons for PDF Navigation using FrameMaker Hypertext Markers
    Wed, April 16
    https://www3.gotomeeting.com/register/817461086
    • Creating Interactive PDF Checklists with FrameMaker-to-Acrobat TimeSavers + Form Assistant
    Wed, April 23
    https://www3.gotomeeting.com/register/886165534
    • Cross-File Links and Bookmarks in PDFs Authored with FrameMaker
    Thu, May 1
    https://www3.gotomeeting.com/register/911390886
    Shlomo Perets
    MicroType, http://.microtype.com
    FrameMaker/Acrobat/Captivate training & consulting • FM-to-Acrobat TimeSavers/Assistants

    The Bookmark Panel to the left of the pdf is not displaying - I have checked everything (and double checked under preferences to ensure that under Documents > Open Settings > Restore last view settings when reopening documents is Not checked.)
    Have reinstalled Acrobat and still am having issues. The only thing I did was open AcrobatLive and converted a doc to a fillable form - I am getting error messages with that now as well.

  • Cross-file links failing under Linux

    (Cross-posted to FrameUsers list)
    FM 9 p250 on WinXP Pro SP3
    Acrobat Pro Extended 9.3.2
    I am  struggling with links across PDF files.  They all work in Windows, but  some work and some don't under Red Hat Enterprise 4 Linux.
    I am  using the following directory structure to create a hierarchy of "menu"  pages with links to other PDFs:
    C:\nCode Desktop 6.0 ISR2\nCode  Desktop 6.0 ISR2\source_docs\contents\Draft for .fm files and .book  files; C:\nCode Desktop 6.0 ISR2\nCode Desktop 6.0  ISR2\source_docs\contents\Draft\graphics for graphics.
    There are  about 50 other directories for PDF documents (they are what you arrive  at using the menus), one for each .book and .fm file set, with a path  such as C:\nCode Desktop 6.0 ISR2\nCode Desktop 6.0  ISR2\source_docs\designlifetheory\draft.  This creates  designlifetheory.pdf. There are crosslinks to other pdfs from within  some of these files.
    For the Contents "menus", I have created one  book per menu. Menus are a  single page long.
    All of the books create single pdfs (i.e., not  multiple files per book). The books are all output to a single  directory, C:\nCode Desktop 6.0 ISR2\nCode Desktop 6.0  ISR2\Deliverables.
    I am using the newlink and gotolink  commands.  The newlink commands are all on master pages.  The gotolink  commands are all on body pages. A typical gotolink would be "gotolink  map_of_help.pdf:helpmap".  This one seems to fail consistently on Linux.  I have tried using "gotolink map_of_help.fm:helpmap", which also  fails.  Should I be using ".fm" instead of ".pdf" in the link?
    The  .pdfs are created using Print to Adobe PDF.  The PDF Setup is Settings:  Standard Job Options, View Generated PDF in Acrobat, Convert CMYK  Colors to RGB; Bookmarks: Generate PDF Bookmarks; Tags: Generate Tagged  PDF; Links: Create Named Destinations for All Elements and Paragraphs.
    I  have tried placing all the books in a single directory using Save As,  with all the paths relative, and books open, and with books closed.  I  have tried dumping all the .fm files and .book files into the same  directory. I have tried outputting to various directories.  I have  combed the archives, and tried to follow Shlomo's training module on  "FrameMaker Books & Cross-File Links."
    I don't seem to get  it, whatever it may be.
    Any help for this newbie appreciated.

    Your links look okay, directory-wise.
    A link would be traversing the root directory if, say, the document is in some subdirectory below C:\nCode Desktop 6.0 ISR2\ and the target was in, say, C:\nCode Masters 6.0 ISR2\....blah blah or on a different disk.
    One other thing: Maybe it's just me and my UNIX background, but using spaces in pathnames or filenames just feels like you're asking for trouble, especially if you want the end product to be portable to other platforms.
    If the links are relative and they work on Windows, as you say they do, then my guess is that Reader on Linux is the problem. Try viewing them using xpdf on Linux and see if the links work then.
    As matter of fact, I issue a very large manual set (69 manuals with approximately 400,000 links) for my Linux customers, and some time ago I abandoned Reader 8.1.2 on Linux in favour of xpdf because I didn't have the time to wait for a fix. The truth is, the links in Reader 6.0 didn't work either, and I was fed up with having to test every new Reader version that came out to see if it actually worked.
    I'd be interested to know if you trace the problem to Reader on Linux, and if you find a Reader version later than 8.1.2 on Linux that works.
    Dave

  • Need pdf file links for different scenarios

    Hi folks,
    I am new to PI.Please can any body provide me pdf file links for different scenarios like   File to File, File to JDBC,JDBC to File,File to RFC, RFC to File, File to IDOC, IDOC to File, Http to RFC, Web services to RFC, File to Mail,ABAP to ABAP proxy and  Java Proxies to JDBC.
    Thanks in advance.
    SAP XI/PI Moderator ****************
    Very Simple. Search SDN.
    Thread Locked.
    SAP XI/PI Moderator ****************
    Edited by: Aashish Sinha on Feb 21, 2012 1:36 PM

    hi chandra, do you have the pdf file for fi-ca configuration

  • Safari and PDF file links

    Why can't I open PDF file links in Safari? The new window that opens shows only a black screen. I have the latest verison of Mac software and Adobe software loaded.
    Thanks,
    Cyn ~

    To  view PDF in Safari Preview remove Adobe plug ins if any.
    Macintosh HD > Library > Internet Plug-ins
    Look for these two files.
    AdobePDFViewerNPAPI.plugin
    AdobePDFViewer.plugin
    Right click it and then select Move to Trash”.

Maybe you are looking for