KT4A Ultra and New Duron

KT4A Ultra supports new duron?
MSI would make a bios update with new duron´s support.

yes ..fully soport

Similar Messages

KT4 Ultra and new Serial ATA drive

Hi there
I've got a WinXP machine with a KT4 ultra, 2 regular IDE hard drives, a CD write and DVD (all working fine).
Yesterday I bought a Serial ATA DiamondMax Plus9 160Gb to use as a 3rd drive. I don't want it to use RAID, I just want it as an additional drive available to windows.
I fitted the drive last night, but when the BIOS runs through the drives at the start it didn't show up. I did however get the RAID utility come up on the screen, and by pressing Ctrl-F it allowed me to create a RAID array (which I didn't).
When I got into windows the drive couldn't be seen, running Maxblaster found a SCSI drive but thought it was 0 bytes capacity.
Can anyone tell me if what I want to do is even possible?
And if so, how do it do it?
Thanks in advance
Rich

Hi Sharp, thanks for the info.
I have the promise drivers installed, so there really shouldn't be a problem there.
Having scanned through a load of other messages on here, updating the BIOS has been recommended.
I was a bit wary of doing this as I have a history of messing up machines, what are other's experiences with upgrading the BIOS?
Thanks again
Rich

745 Ultra and new AMD processors with 333Mhz FSB

Does any one know if MSI 745 Ultra will support new AMD processors with 333MHz FSB?

msmiha,
Right now:
Quote
FSB:
100/133(200/266)MHz clocks are supported.
I do not believe it will be supported but we will need to wait for the next BIOS to find out for sure.
Take Care,
Richard

KT4A ULTRA 6590 DVD and Floppy issues

I'm stumped and frustrated...please be kind! I've upgraded my KT4A ULTRA 6590 Ver 1. with AMD Athon XP Barton 2500 for my kids computer. Everything works great except I cannot see files on either my DVD or 3.5" floppy...unless there is a disk in the drive when I boot. Oddly, I can burn CDs but cannot see the result until I load the CD on my other PC. Through several suggestions from reading the forum, I did go to Safe Mode and sure enough the floppy and DVD work fine. I also tried another known good CD RW and it also exhibited this same behavior.
The BIOS version when I start up is v3.0 (see below), but things appear to be pointing to drivers and/or BIOS. Did update/install the nVidia driver for the video card and also updated to VIA 4 in 1 ver 4.55. Have made several unsuccessful attempts to use the Live Update 3...it basically does not do anything, or it must be incredibly slow when it goes to the MSI website.
In various other attempts to find the correct BIOS for MSI KT4A ULTRA 6590 vER.1, I visited the MSI iste "BIOS Search" and discovered that it has a version 1.4 (4/29/2003) and v3.0 (5/29/2003)...this looks fishy to me. On yet another MSI Mainboard BIOS detail it says use Ver 3.0, but in the very next line says "This BIOS cannot be used on KT4 Ultra (MS-6590)".
I was further consfused when attempting to determine which BIOS was installed. "MSI Info View" program BIOS tab says that "AMI BIOS version is 07.00T", While the MSI Fuzzy Logic program on the MSI info page says the "Chipset : Via KT600". Neither of these appear to be correct.
At this point I ready to throw this thing away and buy another board.
jw
-MSI KT4A ULTRA 6590 vER.1
-AMI rev 3.0??
-AMD Athlon XP 2500 Barton
- 512MB
-NVidia GeForce2 400 MX
-Power Supply 500W+
-40GB (IDE1 Master) WEstern Digital 10GB WD (IDE1 Slave)
-DVD RW NEC 3520 A
-Windows XP Service Pack 2

Cleared the CMOS and made the advanced chipset configuration changes...but no improvement. I did also confirm that during boot, the drives are recognized properly.
Not an expert, but since it operates normally in Safe Mode I'm still suspicious of the IDE, graphics drivers, and/or conflicts. When I look at the device manager in XP, the graphics drivers is new as expected, yet the IDE are standard XP. Since I updated to the 4-in-1 version 4.55, I would have expected some change to the IDE driver dates, but it appears is using the standard Windows drivers...but not sure.
HERE is some more data from the 'System Information...Conflicts/Sharing' that may make sense to you (not me):
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x000003C0-0x000003DF   NVIDIA GeForce2 MX/MX 400
IRQ 5   VIA Rev 5 or later USB Universal Host Controller
IRQ 5   VIA USB Enhanced Host Controller
IRQ 10   NETGEAR WG311v2 802.11g Wireless PCI Adapter
IRQ 10   VIA Rev 5 or later USB Universal Host Controller
IRQ 11   NVIDIA GeForce2 MX/MX 400
IRQ 11   CMI8738/C3DX PCI Audio Device
IRQ 11   VIA Rev 5 or later USB Universal Host Controller
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   VIA CPU to AGP2.0/AGP3.0 Controller
Memory Address 0xA0000-0xBFFFF   NVIDIA GeForce2 MX/MX 400
I/O Port 0x000003B0-0x000003BB   VIA CPU to AGP2.0/AGP3.0 Controller
I/O Port 0x000003B0-0x000003BB   NVIDIA GeForce2 MX/MX 400
Here the 'System Information' data:
IDE Info
Name   VIA Bus Master IDE Controller
Manufacturer   VIA Technologies, Inc.
Status   OK
PNP Device ID   PCI\VEN_1106&DEV_0571&SUBSYS_05711106&REV_06\3&61AAA01&0&89
I/O Port   0x0000FC00-0x0000FC0F
Driver   c:\windows\system32\drivers\viaide.sys (1.00.01.01, 5.25 KB (5,376 bytes), 8/18/2001 5:00 AM)
Name   Primary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&127A70AC&0&0
I/O Port   0x000001F0-0x000001F7
I/O Port   0x000003F6-0x000003F6
IRQ Channel   IRQ 14
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/18/2001 5:00 AM)
Name   Secondary IDE Channel
Manufacturer   (Standard IDE ATA/ATAPI controllers)
Status   OK
PNP Device ID   PCIIDE\IDECHANNEL\4&127A70AC&0&1
I/O Port   0x00000170-0x00000177
I/O Port   0x00000376-0x00000376
IRQ Channel   IRQ 15
Driver   c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 8/18/2001 5:00 AM)
CD-ROM
Drive   E:
Description   CD-ROM Drive
Media Loaded   No
Media Type   CD-ROM
Name   _NEC DVD_RW ND-3520A
Manufacturer   (Standard CD-ROM drives)
Status   OK
Transfer Rate   Not Available
SCSI Target ID   0
PNP Device ID   IDE\CDROM_NEC_DVD_RW_ND-3520A____________________1.04____\5&2DFCC752&0&0.0.0
Driver   c:\windows\system32\drivers\cdrom.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 48.38 KB (49,536 bytes), 8/18/2001 5:00 AM)
IF ANY OTHER INFO WOULD HELP, PLEASE LET ME KNOW...ANY HELP/ADVICE IS APPRECIATED...THANKS VERY MUCH!!

New Update Coming soon to Maxx, Ultra and Mini

Just Seen a New Update is in Soak Testing that will bring voLTE for the Droid Maxx, Ultra and the Mini.
Look Via the Link for more info.. b33
http://www.droid-life.com/2014/10/14/droid-ultra-maxx-mini-soak-test-rolling-out-brings-volte/

"LTE in Rural America"
Verizon to give rural LTE partners access to its AWS spectrum, 'XLTE' network - FierceWireless
Verizon Wireless Up to Seven LRA Partners - The ILEC Advisor - JSI Capital Advisors
Verizon Wireless Exec Details LTE in Rural America Progress
Bluegrass Cellular Launches LTE Network in partnership with Verizon Wireless

KT4 Ultra or KT4A Ultra ???

:D My new KT4 Ultra just arrived today! Before installing it I browsed the site and joined the forum to check for updates and gotchas.
?( How do I identify KT4 Ultra vs KT4A Ultra? Can I tell by the Serial Number or is there a particular PCB Rev or chip on the Motherboard?
TIA for constructive feedback.
John
Concord, CA, USA
New System Specs:
Case: Antec Plus 1080AMG with 420W Smart PS, 5 Fans
OS: Existing XP Home SP1
CPU: New Thoroughbred 2100+ Retail w/Fan
RAM: Kingston PC2700 DDR 512 x 1
Optical: LG DVD/CDRW Combo GCC-4320B 32x10x40x16
HD0: WDC WD400BB 40GB EIDE
HD1: Maxtor 91303 13GB EIDE
Existing Display: MadDog nVidia MX-440 64MB AGP
Plus other peripherals & apps

:O DUH!!! Thanks! I hadn\\\'t removed the Mboard from the bag yet (embarrassed grin...)
Perhaps another dumb question -- despite years of tech experience this is my first MSI board: if my 6590 did not come with optional brackets, can I order them? If so, where? My 5 speaker system needs the optional S bracket. I\\\'m also interested in the optional D and Firewire brackets. Couldn\\\'t find a link on the Taiwan or US MSI web sites.
Thanks a million for your quick reply. My KT4 Ultra arrived in record time. FedEx delivered it two days early, just three days after I ordered it from NewEgg.com here in California -- including two weekend days. Next, YOU replied to my question in minutes!
This is a good omen about MSI and my new Mboard. Thanks again!!!
John
Concord, CA, USA

Help me please whit a KT4A Ultra!! Thanks

?(
Hello friends, how are you?
I have a problem whit my mother board.
I bought a MSI KT4A Ultra the last week, and I bought a AMD Athlon XP 2200+ (1.8Ghz aprox)too for this mobo.
When I turn on the computer and pass the post, the post say that I have a AMD Athlon xp 1500+ (1.35Ghz aprox.), and I don't now why the post say this if I put on the mobo a Athlon xp 2200+. Plese help me to correct this problem.
Thanks.

Thanks edyros
This was the problem, I didn't change the FSB from the bios, for this the post say tha I have 1500+, but I Changed the FSB to 133 Mhz and now the post say exactly 2200+, thanks friend!!! the problem was to resolve, and the mother board work very well.
Thanks friend for the solution.
Good bye.
NOTE: Escuse me my english because I speach spanish, but I hope that you undestand me.

[VIA] Support for new Duron 1400, 1600, 1800 with 266MHz FSB

The following boards support them:
(If a board is not on the list it doesn't!)
-KT6 Delta 6590 V2.0C
-KT4AV 6712 V1.0
-KT4A Ultra 6590 V1.0
-KT4M /KT3M 6596 V1.0
-KM4M-L 6734 V1.0
-KM2M Combo-L 6738 1.0
-KT2 Combo 6764 V1.0

Quote
Originally posted by BaDMoNi
Quote
Originally posted by Wonkanoby
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=411
look again they are there
I looked and that is not KT2 combo 6764, that's prosavage KM2 model 6738...
Heres the real CPU support page for KT2 combo-l ::
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=408
And the claim that applebred isn't supposedly supported is quite apparent there.
Oh, and the mobo I´m talking about is this :http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=408

Please help KT4A Ultra/sound problems

My specs:
KT4A Ultra
AMD XP 2600 333FSB AXDA2600KV3D
Crucial 512MB 64MX64 DDR PC2700
MSI NVIDIA GEFORCE4 Ti4800 8X
Creative Sound Blaster Audigy Gamer 5.1
Linksys Network everywhere fast ethernet 10/100 network card
Xcase PSU Max DC output +3.3v 30A,+5v 35A,+12v 21A,-12v 1.0A,-5v 0.5A,+5sb 2.0A, 500W max
Maxtor Fireball 541DX 20GB 5400 RPM ATA/100 HD
SONY 3.5 Floppy drive
Opto Media 48-12-48 CD-RW DM-828 Master
Samsung sc-140 cd-rom slave
Windows ME
DirectX 9.0b
Temps CPU 41C,System 38C
Ok this is my problem With my sound turned on and the sound Acceleration turned on at all I get massive Video lag while playing open GL games.once I turn the sound off or turn the Acceleration off (turned off I get echoy stagered sound)the problem stops.
Things I have tried to fix it.
To start I was using the onboard sound with the latest drive.Thinking this might be the problem I turned off onboard sound. I bought a Typhoon 5.1 card same problems.So I bought a soundblaster live 5.1 card downloaded lastest drive same problems. just bought a soundblaster Audigy Gamer same problems. I tested my friends 2 year old soundblaster live 5.1 Gamer card and it seems to work just fine.
I have read both the KT4 Unofficial FAQ and the trouble shooting guide nothing in the two worked. I installed the lastest Via 4 in 1,video drivers and the lastest windows updates. I have tried moving all my pci cards in to each slot.I even went into my BIOS and swaped the IRQs for the PCI slots around.Only thing I have not tried is a bucket of water and a 20 pound Sldge. I have posted at 3 o4 other places no one can seem to find the problem PLEASE HELP I think I might be losing my mind.

fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

Random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games

Im having random resets with a kt3 ultra and a MSI GF3 ti200 in 3d games; namely Mafia and Bf1942. Ive tried new drivers for the video card, checked the cpu temp, and bios settings. Any ideas on how to fix it or is their a compatibility problem with the mobo and the video card?

I found my 6380 v2.0 mobo liked 1 brand of ram more than other.I only run crucial,kingston or muskin(micron chips)ram.Put all bios settings to defaults & try only 1 stick(1 brand) of ram at a time.I also found my gf3 ti 200 & 500 liked certain versions of drivers over others.It would crash on some.Try original cd install drivers that came w/ vid :D card.Try running 3d mark 2k1 bencmarks to test all drivers & ram.

KT4A Ultra

Does KT4A Ultra support Dual Channel?

malcav, KT4A does not support dual-channel. So as KT4, KT3, and the latest KT6, in fact all VIA's AMD Athlon solution DO NOT support dual-channel.

Mid Year Go Live-Australia and New Zealand

Hi,
We are implementing Mid Year Go Live for payroll for Australia and New Zealand.
In case of India, we have schema INLK and list of technical wage types that need to be uploaded to T558B and T558C.
SAP has delivered a note for Payroll India which gives the list of Technical wage types.
Pls suggest what are the technical wage types to be uploaded for Australia and New Zealand and the schema to be used for Mid Year Go Live.
Regards
Yashika

Hi,
as far as i know, there is no such schema or special wage types except the ones that are used for LSMW before go live.
In india, they might need the schema or technical wagetypes for the taxation purposes i guess which is different from AU or NZ.
but australia/newzealand have simplified the taxation for software provides.
Regards,
LG

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

Pop-ups and new tabs opening when I try to browse

Hello
I'm having trouble with pop-ups and new tabs for 'Mackeeper' among others, launching themselves in Safari on my MacBook Air. This has only just started after having the laptop for 3 months.
Operating system: OS X 10.9.4 (13E28)
Speed: 1.4 GHz Intel Core i5
Storage capacity: 4 GB 1600 MHz DDR3
I have tried troubleshooting by looking in 'Extensions' but there's nothing to remove. I've also tried Forum Member Linc Davis' advice, but unfortunately that's not working either.
I've tried all of the suggestions below, but nothing's working. It is driving me bonkers, so if anyone can help I would be most grateful.
Thank you
Jess
Linc DavisJul 10, 2014 8:22 AM Re: ANNOYING MACKEEPER TABS AND POPUP ADS
Re: ANNOYING MACKEEPER TABS AND POPUP ADSin response to chickashnaz
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(122872)

New home and new WIFI sluggishness

I recently moved in with my girlfriend. At my last location, I quit using wifi, was connected directly via ethernet to my cable internet modem. I was also Airport sharing the connection for my kids' iMac.
Now in her new place (and new wifi), I can connect with full bars via Airport, but many sites do not load the first time. I need to refresh the browser several times to get many sites to load.
I have turned off the internet connection sharing as well. Is it some type of DNS problem?
clueless... assuming it has something to do with the move.

HI greengrass,
There is no real procedure for you as a customer. You can place an order for broadband and phoneline simultaneously. BT will take care of the rest.
If there a line in the new place then it might need an engineer call out in order to get it up and going but this will be made clear whenever your order is placed.
TX
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

KT4A Ultra and New Duron

Similar Messages

Maybe you are looking for