KT4AV Big problems Please Help!!!

I am having a few problems. I have just built a new computer here are the specs:
AMD Palimino 1.9GHZ
MSI KT4AV
Winfast 128DDR 8X AGP
80GB Seagate Harddrive
128SDRAM
I have tried booting this up and it boots up then after about 10 secs it just turns off and makes the "nee nar nee nar" sound like an ambulance. Can anybody please help?

i had same problems before..i think its the ram problem..just give it a small 'twitch' to align it a bit and it boots ok..sometimes when i mess up inside my mobo it occurs again and i just have to try and twitch it again untll it's ok....i think the ram slots are not so good and the rams are quite 'loose'..good luck

Similar Messages

I have a big problem please help

Hi...
Im trying to log in to my MacBook laptop with a password...but the problem is that the letter r is being only capital...and the Shift button is writing also capital r...so as my password has the letter r in it then I cant log in to my laptop...please help I need to fix it all my work is there...
Thank you

I'm not suggesting anything. Your options are:
Start over. It'll take anywhere between a few days and a few months depending on your CD collection
Go to a CD ripping agency. It'll take a day or two, and they charge about a buck or two a CD.
Go to a data recovery agency. They charge a few hundred dollars an hour.

I have a big problem please help me

Hi,
first of all, excuse my very bad english.
I have a big problem. I made a big movie (2 hours) with a lot of effect in iMovie HD and I made a big mistake : I erase it without burning.
Is there a way to save my life ??? A secret folder with a backup ?
thanks a lot

Hi yab-yab:
Welcome to the discussions! (Your English is not bad)
How did you delete it? Empty imovie trash? Empty Finder trash?
Did you look in Applications->iMovie (or wherever you saved it) and see if the movie was saved there? if it is not there, it is gone ;(
Sue

I have a big problem ,please help,please,please,pl...

I have bought N97 recentley and I have install an application to hide the photos but all my data have been lost and i couldnt start my phone gain. My phone is not starting at all.
any one know how to format the phone??
please,

If that fails your ONLY option at this stage is to return it to the retailer or visit a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Macbook not booting - big problem - please help!

Ok, here's my story.
The macbook was re-formated, and was working fine. Software updates followed and firmware update as well. It completed well and the computer was running flawlessly for a day or two.
After beeing shut down, it doesn't want to boot anymore.
When i turn it on, it stays on the gray screen with the apple logo and it loads. Before OS X turns one, it shuts down.
I have already tried all the troubleshooting that the help section offers (reset ram, check battery, reset power management etc...)
I called Apple on the phone, the first guy suggested that i restore the firmware using the firmware restore disk that is available on their site. The computer refused to boot the CD. It also refused to boot from Mac OS X installation disk.
I'm really out of options here.
The second time i called, they told me they couldn't much unless i paid, since the warranty is expired.
Any suggestions will be greatly appreciated. Hopefully i won't have to send it for repairs, because i'm on a tight budget.
Thank you very much.
Joey
[email protected]

welcome to macbook forum.
insert your installer disk #1, restart and press alt/option and it will give you all option to boot from.
if it only shows you to boot from installer disk system folder, that might be the sign that your HD is failed.
or you can insert installer disk #1, restart and press C to boot right away from the isntaller dsik.
after select the language, open utilities from menu bar and select utility / and check if your hd is mounted (on the left portion), if it mounted, choose repair disk and reboot (you might need to re-install the OS X if the system folder corrupted). But if it didn't shows up, then it might be failed as suspected.
Since your warranty is already expired, you can consider to get a new HD yourself and install that HD and OS X yourself (cheaper than using apple genius guy at apple store).
Good Luck.

Just upgraded to Lion, how can i use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.

Just upgraded to Lion, how can I use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.

Apple has made a serious error not advising people when the Lion upgrade occurs that their present software may/will not be compatible and advise the user of such before and allow a opt out.
All you can do (besides upgrading all your software) is backup your data off the machine (not to TimeMachine) and disconnect all drives.
Hold c boot off the 10.6 disk and erase your makers hard drive on the far left, (that's the entire drive of everything)
Partition tab: Option: GUID, format OS X extended and click apply so you get a new GUID (replacing the Lion one or trouble occurs later)
Quit and install 10.6, then go through setup and use the same name as before, then update to 10.6.8
Then c boot off the 10.6 disk again and use Disk Utility to Repair the disk the 10.6.8 update messed up.
Then install all your programs again from fresh sources and lastly your user files in the same main user folders as before (music, pictures, documents etc.)
Done as described will get you back just like it was before as close as possible, make SURE to use the same username or else your iTunes and other files get all messed up. Password and drive name can be different though if you wish.
Note: if you've upgraded from 10.5 to 10.6, then you don't get the free iLife as it's not on the 10.6.3 white disks, only on the disks that came with your machine. So that will have to be purchased and reinstalled or use Pacifist to extract it from the 10.5 disks.
This handy site can advise you what software doesn't work with the Lion.
http://roaringapps.com/apps:table

Choppy video on big screens PLEASE HELP!

I've noticed that the videos that I have exported from CS3 are very smooth when played on a computer screen and average size tv screen, but are very choppy if played on a large TV or projected on the wall. Is there a way to remedy this? Please help!
Drew.

I think I figured out the issue. Thanks for all your advice. I'll repost if I have any other problems.
Drew.
Date: Wed, 24 Jun 2009 10:24:22 -0600
From: [email protected]
To: [email protected]
Subject: Choppy video on big screens PLEASE HELP!
Drew,
How is the large-screen projector connected, via a set-top DVD player to it, or by a computer connected to it? If it's via a set-top player, is it the same one used for the small-screen TV, or a different one? What is the make and model of the set-top player(s)?
Also, what DVD media was used, and what was the burn speed used to create the DVD? Was this authored in Encore, or with some other authoring application?
Good luck,
Hunt
>

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd.After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality?

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?

Hey Z,
Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Project:
- total project duration: 79:04 minutes
- total project capacity: 4.327 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:39 minutes
- total menu capacity: 37.370 MB
Movies:
- total movies duration: 78:25 minutes
- total movies capacity: 4.291 GB
I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance.

My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you...

KT4AV Big problems Please Help!!!

Similar Messages

Maybe you are looking for