KT4V and AMD Athlon Xp 2400+

Ive got a KT4V motherboard with a Geforce MX 440 Graphics card, 512DDR PC2100 Ram and an AMD Athlon Xp 2400+ Cpu. I was wondering wether anyone could tell me anything i could do to make my system run that bit faster without overclocking.
Im gonna get a new case soon with a better power supply and cooling so im glad to hear any suggestion for overclockin as well. Its not gonna be watercooled or anything like that so i cant go extreme with the fsb and stuff.

problem is your ram,your best o/c is lower multiplier,read the wire trick thread as you need that and then run it at 166 fsb or a bit more
but chances are at 166 your rams not going to boot being only pc 2100
so leave it be as far as multiplier and raise fsb a bit at a time
due to the multiplier bit your chipset uses at around mid 140 fsb it will not boot as agp and pci will be out of specs to much

Similar Messages

Kt4v-L and amd athlon xp 2200+ issue.

Hey all,
I'm new to the boards here and am in complete desperation.
I just received my new AthlonXP 2200+ in the mail and went to put it in. I had some minor issues with CPU acknowledgement (reporting it as a 1500+) so I flashed to version 1.8 of the KT4V mainboard bios. After the flash was completed (done with livebios btw) My system will no longer boot into Windows. It WILL boot into safe mode, but as far as actual fully functional windows, it stalls just before the windows logo shows during the loading screen, kind of like a transparent image.
I'm not really all that proficient in all the computer lingo..so i may leave something out,if so please let me know and ill dig up the needed info. But this is my system setup:
Mainboard: MSI Kt4V-L Bios version 1.8
Cpu: AMD Athlon XP 2200+
Power: Alliance 450W
Video: Visiontek GeForce 3 TI500
Sound: Creative Labs Sound Blaster Audigy X-Gamer
Ram: Samsung 512 DDR400
Hard Drive: Western Digital 10 gigabyte
CD-RW: Sony
CD-ROM: Creative labs
Lan: Onboard
If anyone has any idea what my problem might be, and any possible way to remedy this situation, It would be greatly appreciated :D

Alright... I think your FSB is set wrong. MSI says that a 100mhz FSB is incompatible with DDR400 memory, so that probably explains your windows boot problem. To check that, enter the bios when you turn your computer on and go to "Frequency and Voltage" (press delete to enter the bios). Set the front side bus to 133mhz. That is most likely the problem since a 2200+ has a 13.5 multiplier, and 13.5 *100 = 1350mhz, which is about the same speed as a 1500+. Also, check to make sure your RAM speed is set to auto. I think that option is found under Advanced chipset options (it's the third one on the left). Post back if that works or not.

K9N Neo-F and AMD Athlon X2 AM2 6000+ (125W)

Hi Everyone!
I want to upgrade my PC, now I have:
MSI K9N Neo-F motherboard
S/N: 601-7260-010K0609058577
MS-7260 ver. 1.0 K9N Neo nForce 550, AMD AM2
CPU: AMD Athlon X2 AM2 3800+
RAM: GoodRam 2x512MB (667) and 2x1GB (667)
GPU: Zotac GF 8800GT
Now I want to buy:
CPU: AMD Athlon X2 AM2 6000+ (125W)
RAM: GeIL 2x2GB (800) Black Dragon II
My question is: can I use this new CPU on old motherboard?
Have anyone similiar configuration?
In this topic: https://forum-en.msi.com/index.php?topic=108896.0 someone has the same motherboard and CPU, but talking abolut PSU...
Waiting for help :-)

Quote from: Arcur on 04-June-08, 03:59:54
I was looking for a 125watt board too and its really hard to find one from MSI that have the things I want, I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. So no AM2+ for you if you want a 125watt processor on it and a nvidia chipset. is there any reason why MSI cant fix 125watt support?
If you dont care about a future quadcores upgrade you can buy a old AM2 board, but dont forgot to look at the cpu support list, because the most AM2 boards doesnt support 125watt either. ???
"I was looking for a 125watt board too and its really hard to find one from MSI that have the things I want, I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. So no AM2+ for you if you want a 125watt processor on it and a nvidia chipset. is there any reason why MSI cant fix 125watt support? "
That is not true, 125W support usually have high end mainboards.
"I cant even find a board with Nvidia chipset, amd2+ and support a 125 watt processor (or not tested OK yet) or some boards without a cpu support list yet. "
Here are they:
K9N2 SLI Platinum/K9N2 Zilent ==> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1443&maincat_no=1&cat2_no=171
K9N2 Diamond ==> http://global.msi.com.tw/index.php?func=proddesc&prod_no=1438&maincat_no=1&cat2_no=171
AM2+ Nvidia chipset boards, not only support 125W, but support 140W CPU too.

OCI 9.0.1 and AMD Athlon Processor

Hello,
I have a client who is using an Oracle 8.1.7 server and is connecting from workstations running OCI 9.0.1 (the 9i R1 client). This is working fine except for on one workstation. The only known difference with this machine is that it is using an AMD Athlon processor (all the others are Intel processors).
The behavior appears to be that for floating point numbers, Oracle/OCI is telling our product that the numbers are integer numbers (no decimals). Thus, my application is not displaying the decimal places (since it is being told there are none).
All other workstations work fine.
Any ideas? I am wondering if there is a known issue with the AMD Athlon processor and the oracle 9.0.1 client...? I am attempting to convince the user to try the 9.0.2 client, but I don't want to waste his time.
Thanks in advance for any suggestions.
Rob

Thanks Adrian.
I'll try to get him to run a straight select, but I don't even know if they installed SQL-Plus on the machine. He hasn't exactly been cooperative (I've asked him to check other areas of my application and he doesn't) so I don't know what he will do.
As for the sqlnet.ora file, I am not sure what to look for in there...? or do you suggest blowing it away and starting over?
Thanks again,
Rob

Dreamweaver and AMD Athlon processors

Dreamweaver CS3 load my AMD Athlon 3200+ and AMD Athlon64
3200+ really hard.
Look
here!
Is anybody know about this problem, or it`s only me?

What is your AntiVirus? Is it doing realtime scanning? This
is usually the
cause for such a load.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Fuffel" <[email protected]> wrote in
message
news:fe6bkm$anq$[email protected]..
> Dreamweaver CS3 load my AMD Athlon 3200+ and AMD
Athlon64 3200+ really
> hard.
http://img74.imageshack.us/img74/7427/dreamweavercs3hy9.png
> Is anybody know about this problem, or it`s only me?

MSI KT4 ultra and AMD ATHLON 2600+ and Corsair 512Mb 3200

Hello,
i've bought a: MSI KT4 ULTRA and a AMD ATHLON 2600+
Today, i've updated the bios to the version 1.3! So: no problem to reboot after the process complete.
BUT, now i can't set the CPU at 2.16Ghz (280Mhz clock) because if i set the clock up to 100Mhz it doesn't reboot anymore! the motherboard detect the frequency @ 1250 Mhz :(((
Please: HELP ME
(sorry for the grammar and / the english) but i'm a french guy.

Hi,
I had the same issues, see the thread:
http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=11717&boardid=13&styleid=1
Essentially I had to set (in the BIOS) the FSB to 166 and left the Multiplier on auto. This ment the processor was reported properly as 2600+, but the memory will only run at 333 MHz... Yeah I think I wasted the money on getting the latest and greatest memory too....
Had me worried for a while, I though my supplier had palmed a bad chip off on me.... It just that the board can't do the highest speed chips and the highest speed memory at the same time (it states that that is unsupported in the manual...)
hope the helps...

FX5900XT-VTD128 Board hangs with Mother board ASUS A7NE8X-E de Luxe and AMD Athlon 3000+

Hello Folks,
Please, I need your Help !!!
I bought a new FX5900XT-VTD128 Board and I am trying to install it in my new PC and it hangs the PC. It has just frozen it and I can not access neither the Bios or anything else. If I use my old Nvidia 4, everything works fine. My Mother board is a ASUS A7NE8X-E de Luxe and Monitor is a LG Flatron 17" Model: T710SH. The Bios of my PC is the last version liberated by ASUS version 1012 E. My Processor is an AMD Athlon 3000+ DDR 400 - The PC has 1GBDRAM (DDR - 400).
Does anyone have any idea how to solve this problem ?
Thanks,
Mario

Hi Kingfisher,
Thanks for your help.
But the Video Cards hangs in the Boot moment, before MS Windows XP comes in and the driver begins to act. My concern is a hardware conflict or a incompatibility or even hardware defect.
What kind of troubleshooting is ideal ?
Regards,
Mario

K9ND and AMD Athlon 74 FX

Will these two work together?
Or will I have better luck with 2 2218's?
I have 2 2210's and they are running too slow for me.

Quote from MSI at http://ocss.msi.com.tw
"Thank you for your support to MSI.
Sorry, MS-9652 can not support Athlon series CPU, which supports Opteron and Barcelona CPU.
Thank you"

KT880 Delta and Amd Athlon XP Mobile

Does KT880 Delta will work with Athlon XP Mobile? PowerNow! features will work?
(AMI bios)

ordinary desktop boards won't support changing multiplier on the fly. only laptop mobos do this. mobile athlons XPs are only popular with overclockers, because of the unlocked multiplier in BIOS. not all mobos support Mobile Athlons though, some modifications may need to be done
however, the Athlon64 cpu's and mobos have "Cool n Quiet" technology, which follows the laptop PowerNow! feature, so when cpu is not heavily worked, the clock speed drops to 800mhz, allowing the CPU to run cooler and allows thermal controlled fans to operate slower i think this would suit you better

Overclocking complications on KT4V running Athlon xp 2400+ HELP!

Hey, I have a KT4V running a AMD Athlon XP 2400+ but it was only running at 1.5 gHz instead of 2.0 gHz which is what it was supposed to be running at... so, like an idiot, I went into my BIOS and set the clock speed at 133 MHz x 15 instead of 100 MHz x 15. I saved my settings and restarted my system and AWW CRAP...the display won't work (and probably other things). The monitor doesn't even acknowledge that it's plugged in. All my system fans are running, but really nothing else. What do I do!?
Guh....
Muzz

Alright, got it going again. Thanks a TON to both of you

Is my Athlon XP 2400+ Tbred B Unlocked? Please help!

I have an Athlon XP 2400+ on MSI KT4 Ultra-BSR and i have read that Tbreds B are unlocked but when i tried to changed the multiplier my system crashed and the only thing i can do was to clear CMOS settings? Is there any method to unlock my CPU?
My system:
AMD Athlon XP 2400+
MSI KT$ Ultra-BSR
256 MB PC3200 Samsung
Maxtor Diamond Max Plus 9 60 GB
MSI GeForce 4 Ti 4200 8x
WinXP Service Pack 1

Quote
Originally posted by Takki
here http://www.msi.com.tw/program/service/forum/index.php?threadid=14566&boardid=14
(containing a pic)
THANX to member ZachM.
Hey, one more problem. I thought the wiring trick was to connect two pins under the CPU but the pic in the link made me more confused. The thing i have to do is to put the wire into the socket or to connct the two pins of the CPU? Can you give more info about this?

K7T Turbo2 and Athlon XP 2400+

Hello everyone !
I have a question about K7T Turbo2 motherboard and BIOS update.
Here it goes: I reacently bought Athlon XP 2400+ and installed it on my mobo.
But after reboot my PCU wasn't recognised and I read on MSI website that I had to
upgrade my BIOS from 3.5 to 3.6 ( I think, don't remmeber the version ) . So I did that too
and this time bios showed my CPU as XP 1800+. I said there is something wrong with CPU or
they gave me a wrong one, but NO. After reading the manual I realised that that XP 2400 uses
266 insted of 100 ( standard that came with mobo )and that I had to remove J17 jumper to make it
work and also had to change options in BIOS --> like FBS 133 and multiplier 15 to get XP2400.
Reason that I'm expling what I did is to let you know what stuff I did before I came to this forum to
ask a Q. Anyway after all of that fuss PC works and shutdowns OK. But ( yeah there is a but ) now insted
of starting at once I need to press power button one time -> and you can here power starting and lights
showing but system not starting. Then I push and hold button for a few sec to shut it down. After
second push of power button system starts as normal. It looks like it need a bit of warm up ( like my car in winter time ) before it actuali start. Is this a BIOS error becouse it can't start the system with ONE
push of the button? Never had tha problem with Duron CPU and old BIOS. Need some help ..
Thanks

Hi!
I think I solved your problem! It seems that I had exactly the same problem and the same settings you have. Then, I read this Trouble Shooting Guide at:
https://forum-en.msi.com/index.php?threadid=1131&sid=
which says:
"As for mulipliers with AMD CPU's, just set them Automatic, as they are hardcoded on the CPU themselves and will allway's be correctly, even if if you think the BIOS doesn't know it."
So I changed the multiplier from BIOS from 15 to Default, and now it starts up great even at the first time! Even my CPU benchmark score with PCMark2002 free went up from 5195 to 6344 so now it actually works much better than with the multiplier 15!!
Try this before buying a new PSU and tell if it helps...
Regards,

K7t Turbo2 and an AMD Athlon XP 2600+

I recently flashed the BIOS on my K7t Turbo2 board to the 3.6 version which supports AMD Athlon XP processors up to 2600+. However, after I installed the new cpu, set the core voltage to 1.65, the multiplier to 11.5 and the DCM value to 166 the computer would not boot. Instead I received a simple "Beep" then two to three seconds later, another "Beep." This continues to no avail and it takes almost ten "hard reboots" which is killing my hard disks to even get back into the BIOS configuration, wherein I modified the DCM settings to 133 instead of 166. Now the computer boots but continues to tell me:
Unknown Processor at 1533mhz
When I did get it to run at 1910mhz (notice 1910, not 1917 as it should be), it also said Unknown Processor. Then, on one of the three ocassions I was actually able to boot the computer at the higher clock speed, none of my drives appeared. On the second ocassion, the Linux boot process froze and on the third, Windows XP wouldn't boot. Now, if anyone has any suggestions as to what BIOS settings I can try, or even resetting my BIOS to a previous version, then trying to reflash it, that would be great.... If, however, this is more of an issue with an MSI BIOS patch, please release another version that works. Thanks much!
-Adam

Go with the Tbred 2400+ bud, Thats what i have at the mo in my KT3 Ultra 2C, and with my old MSI ti4200 with 128mb, it kept up with a K7N2 Delta ILSR which is running a Barton 2600+ and an MSI FX5600XT with 256mb (that rig only beats me on the extra test in 2001se and 2003 that the FX card covers).
Cant wait for my K7N2 Delta ILSR to arrive to go with my Ti4600.
Should happily blow the Barton rig away

AMD Athlon 2400+ core speed

I have recently purchased a new MSI KT4 Ultra (FISR)
MS-6590 motherboard and an AMD Athlon 2400+ processor.
However the motherboard is only picking up the processor to be an AMD Athlon 1800+. When I go into the bios and look at the CPU core speed it is set to 100Mhz when it should be 133Mhz. I would change this value but it is disabled (greyed out). How can I set my motherboard to use the processor correctly asa 2400+ ?
Thanks
Paul

Hi, i have similer problem, i have the same MB and chip the 2400xp and when i put it on 133mhz and 15x multi which is stated on the MSI website and save it in the bios, my monitor light flashes, its like my graphics card is not working, but i can hear my pc booting up, but i just can't see anything, i have updated my graphics card drivers and the bios for the MB but still no luck, i have to clear the cmos to get my monitor back but then the chip speed is back to 1800.
i have a ti4200 8x agp card and i am a little miffed as i didn't buy a 2gig chip to have it running at 1.6gig, does anyone have any idea.
zombi69

Windows 8 64bit not compatible w/ AMD Athlon 64 processor and/or ASUS A8N-SLI motherboard.

Why should I have to go through a plethora of troubleshooting techniques, then have to settle for using the Windows 8/ 32bit install CD, when I have a 64bit system? I think it's probably something in the Windows
8 /64bit code that causes it to fail install w/ AMD Athlon 64bit processor, and/or my ASUS A8N-SLI motherboard. After a lot of hassle I tried the Windows 8 /32bit CD and that seems to work fine. My real question is, why should I have to settle
for 32bit on a 64bit system?

I had the same experience trying to install Window 8 Pro 64bit (Build 9200) on an old XP SP3 32bit system, but I somehow got it working; the full story.
I had two XP Sp3 32 bit systems I wanted to upgrade to Window 8 Pro 64 bit (with the $40 upgrade deal available now). System#1 is: I7 920/Asus P6T deluxe/EVGA 560Ti/3GB/1 TB SATA 300 drive/1.44 Floppy/ 12X Bluray burner (pulled the old TV tuner card for
upgrade-incompatible). I ran the Windows 8 upgrade advisor - very few issues (TV Tuner card as mentioned and other software) - bought the upgrade. Downloaded the upgrade from my Win7Pro 64bit system to obtain the 64bit ISO (2.69GB) - burned to DVD. Installed
from DVD; no problems, finished in under 20 minutes - working great (really fast boot!).
System#2 is: Opteron 180/Asus A8N-E/EVGA 275GTX/2GB/1 TB SATA 300 drive/ 1.44 Floppy/ 16X DVD RW burner; the Windows 8 upgrade advisor - more incompatible software than system#1, but no incompatible hardware. I had read a number of blogs concerning the issues
others were having with the upgrade failing, so before I purchased, I thought I would run the 64bit install DVD I had (known to work on the other system) to see if it worked. I should note this system was not-in-use and thus I was not worried if the install
failed (I'd just be annoyed!). Ran the install from the DVD; initial splash screen - no spinning dots - waited 15 minutes (by which time no activity on DVD or hard drive) - failure. Rebooted - entered bios (1010) - tried many combinations of settings up to
disabling nearly everything (NVRAID, Legacy USB, Floppy, Audio97- all disabled / moved SATA into every slot (1-4) / tried SATA 150 and SATA 300 (SATA2, slots 3-4) - no change - failure X4 attempts. Now original XP3 installation is corrupted (GRRRR!) - I should
have imaged the drive BEFORE - oh well. Read more about others experience with this seemingly NForce board-related issue. Plan B - I will try install with an IDE (PATA) hard drive (80GB) - failure. Read more - some mention Window 8 installer not "liking" XP
partitions / disks (???); Plan C - Re-partition / format / check 80 GB IDE drive with WDTools - attempted Win8Pro install - failure. Dejected; last attempt before considering Win8Pro 32bit - Plan D - Re-partition / format / check 1 TB SATA 300 drive with SeaTools
(Barracuda 32GB buffer-7200rpm) - run Win8PRO 64bit install from DVD (build 9200) - success! Install took nearly an hour, with 3 reboots to the finish. Specifics (install configuration): 1 TB SATA drive in Slot 4 (SATA2), upgraded memory to 4GB Corsair PC3200
(4 slots filled), Two DVD drives on Primary IDE channel (master and slave), secondary IDE channel - no devices, bios (1010) - NVRAID, Audio97,1394 port,LAN -disabled; USB 2.0, USB Legacy, Floppy - enabled, IDE-Auto), TrendNet USB wireless adapter on USB slot
2 (motherboard), EVGA 275GTX in PCIe slot 1, no other cards. System seems to be performing well (fast boot times, no hangs), but as noted, no sound (I actually forgot to re-enable the Audio97 device in bios; it was 2am). I will see if I can get the Audio97
enabled today; my backup is to add a Turtle Beach Montego DDL PCI card (with the Windows7 64bit driver and run in compatiblity mode). Hope this saga might help some others out - good luck.

KT4V and AMD Athlon Xp 2400+

Similar Messages

Maybe you are looking for