KT4V and heatsink compatibility

Hi, only a question:
Is the MSI KT4V motherboard compatible with large heatsinks like the Volcano 12 (82x65.6mm), Silent Boost (82x70mm) or 80x80mm heatsinks ?
Thanks.

Thanks Roderick for your help  
Hopefully it fits then. It arrives tomorrow. whihc is good.
I saw that website too but   I cant understand it lol. Does have Kt4V tho
Umm anyone else got that motherboard and heatsink.
Cheers again Roderick
SASpaz

Similar Messages

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

    We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
    I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
    "The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
    I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
    Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
    Thanks!!

    I was able to get it to work using your instructions off of here and your other thread
    Thank you!
    Chris
    http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

  • IPhoto 6 and Camera Compatibility

    I recently upgraded my OS to 10.5.8 from 10.4... I know very late. I had no intention until the upgrade to my iPhone 3GS required it. Regardless, I am running IPhoto 6.0.6 and it has worked fine. I own a Canon T1i EOS Rebel digital camera. Up until the conversion to Leopard, I would plug the camera into the port and iPhoto would open up and transfer the pics without an issue. Today, I tried to upload pictures, the USB cord was secure on both sides and nothing happened. I turned the camera on and off twice to see if by starting it up connected would change things, nothing did. I ensured that the battery is charged in the camera and that the sleep setting was not tampered with thus not allowing it to transfer.
    I am suspicious about the upgrade to Leopard causing this incompatibility issue with my camera. When I did a search on the apple website, the page about iPhoto 6 and camera compatibility is a dead link. So a couple of questions if someone would be kind enough to help me out with:
    1) Is the import of pictures not occuring because of an incompatibility issue between my camera and iPhoto 6 suddenly? Or is incompatibility between 10.5.8 and iPhoto 6?
    2) What is the best solution? Upgrade to iLife '11? Or will that require upgrading to Snow Leopard as well? Or is it better to buy the $129 bundle of Snow Leopard, iLife and iWork for compatibility issues?
    3) Lastly, is there a webpage on apple that shows these compatibility issues? For instance, if I upgrade one thing in the future, all the other software suites that need updating as well?
    Thanks in advance to whomever can help me.
    Cheers,
    -Tod

    1) Is the import of pictures not occuring because of an incompatibility issue between my camera and iPhoto 6 suddenly? Or is incompatibility between 10.5.8 and iPhoto 6?
    Neither. The usual cause for this issue can be a damaged plist file, a setting on the camera or Mac or minor directory damage on the card.
    Plist file: Can you access the card with Image Capture (in your Applications Folder)? If so, you might try trash the iPhoto plist file, if not try trash the Image Capture plist file as well.
    Settings: What's set to happen when you connect the camera? With iPhoto 6 that's in the Image Capture. Your camera has two modes for talking to the Mac: Mass Storage and PTP. What one are you set to? Try the other one.
    Directory Damage: Have you tried using a USB Card Reader? Can the Mac see the card in that?
    Regards
    TD

  • Info regarding Diswarrior 4 and Leopard compatibility

    I emailed Alsoft regarding Diskwarrior 4 and Leopard compatibility. Here is the response I got.
    +DiskWarrior 4.0 will successfully rebuild a disk that has Mac OS X 10.5+
    +Leopard installed or a disk that has been attached to a computer running+
    Leopard.
    +However, some operating system functionality has changed within Leopard+
    +itself. As such, there are some compatibility issues when running an+
    +installed copy of DiskWarrior 4.0 while started up from Mac OS X 10.5+
    +Leopard. Alsoft currently recommends that you do not run DiskWarrior 4.0+
    +while the computer is started from Mac OS X 10.5 Leopard.+
    +Instead, to run DiskWarrior, you should start up the computer from either:+
    +1) A DiskWarrior 4.0 CD.+
    +2) Any disk that starts up in 10.4.x and then run DiskWarrior 4.0.+
    +An updated version of DiskWarrior that has complete Leopard+
    +compatibility will be released soon as a free download for existing+
    +owners of DiskWarrior 4.0.+
    +-- What you can expect when running DiskWarrior 4.0 under Mac OS X+
    +10.4.x and rebuilding a Leopard disk.+
    +All features work as expected with one exception: FileVaults created+
    +while started from Leopard are not visible to DiskWarrior 4.0 and cannot+
    +be rebuilt (repaired).+
    +-- What you can expect when running DiskWarrior 4.0 under Mac OS X 10.5+
    +and rebuilding a Leopard disk.+
    +While not recommended (and discouraged), if you do run DiskWarrior 4.0+
    +while started from Mac OS X 10.5 you might encounter some problems such as:+
    +1) There is a lengthy delay whenever DiskWarrior is determining which+
    +drives are currently attached. This delay is dependent upon the number+
    +of attached drives and may last up to 2 or 3 minutes. You will+
    +experience this delay when first starting DiskWarrior, whenever a disk+
    +is attached or detached while DiskWarrior is running but idle, and+
    +whenever a rebuild is completed or canceled.+
    +2) You cannot rebuild FileVaults or disk images.+
    +3) In step 9 (comparing directories) of a rebuild, the progress bar+
    +might get to 100% even though the comparison step is not finished.+
    +4) When performing Check All Files and Folders the progress bar might+
    +get to 100% even though the check is not finished.+
    +5) After rebuilding a disk, DiskWarrior may report that some files or+
    +folders have had their permissions changed. This is inaccurate and the+
    +permissions have not been changed.+
    +To repeat, an updated version of DiskWarrior that has complete Leopard+
    +compatibility will be released soon as a free download for existing+
    +owners of DiskWarrior 4.0.+
    +-- What about DiskWarrior 3?+
    +DiskWarrior 3 and earlier versions are not compatible with Mac OS X 10.5+
    +(Leopard). Alsoft does not recommend running DiskWarrior 3 or earlier on+
    +a disk that has Mac OS X 10.5 Leopard installed or a disk that has been+
    +attached to a computer running Leopard.+
    +-- Marc+
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    +Marc Moorash, Alsoft Technical Support+
    +Email: [email protected]+
    So, it seems it will work but you need to run it from the disk or if you have it installed on a external drive running Tiger, it will work.
    Thom

    If you open your Tiger Address Book, select all cards, drag them to the desktop, it will make one big "mega-VCF" card with a name like "Alan Adams and 543 others.vcf" Dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine. They will all import just fine into your Leopard Address Book.
    Try doing something similar with your iCal data, Open the application, choose your calendars one at a time, and select File > Export. That should make a big "mega-ics" calendar card with a name like "work.ics" or "home.ics, i.e., "originalcalendarname.ics" with all the events of that calendar. Then same drill: dump that to a flash drive or email it to yourself, then doubleclick on it on the Leopard machine.
    Both generation methods create text files, which should import just fine into the Leopard applications.

  • KT4V and KT4A-V differences....

    Hello, I had a kt4v and just finished setting up harddrive the way I wanted it, then had problems and had to get another. Well, I got a kt4a-v instead,thought they were exactly same but one of the chipsets are different(VT 8237 on KT4A-V and VT 8235 on KT4V). I was wondering if I'll have to format and reinstall or can I use the harddrive with the KT4V info on it? Thanks

    Thanks, you were right, drivers cover both vt 8235 and vt 8237 chipsets.

  • Seagate ST9750420AS HDD and W700ds compatability issue

    There seems to be a compatability issue with the Seagate 750GB drives (ST9750420AS) and the W700ds (and possibly other W series notebooks).
    With the controller set to RAID in BIOS Windows 7 and possibly other OSs can not access the HDDs. This configuration results in a 7B "inaccessable boot device" error BSOD.
    Testing revealed only the ST9750420AS with FW 0001SDM5 (the only FW avaible) results in the 7B BSOD regardless of the RAID driver version installed. I have not phiscally removed the Turbo memory device to see if it plays a role in the problem or not.
    The W700ds (2757) system I have available to test is compatable with the following Seagate (drives with various FW versions):
    ST9160823ASG
    ST9500325AS
    ST9500420ASG
    ST9500420AS
    ST9640320AS
    These were tested with Widows XPP 32bit, Windows 7 64bit and Linux 64 bit, these were tested in both RAID and non RAID configurations.
    And not compatable with:
    ST9750420AS, tested with Windosw 7 x64 in RAID configuration.
    Any comments, corrections or resolution welcom.
    Thanks
    JMG

    Hi Jamessts,
    Welcome to the HP Forums!
    I have read your post on installing your HDD to your HP computer, and I would be happy to be of assistance!
    To determine your product specifications, I will need to know what the Product and Model Number of your desktop is. The next piece of information I will need is the version of Windows you have on your computer.
    Since you stated that the HDD works in another computer, I suggest following this resource: "Windows could not complete the installation..." solved by MarkBeacom. This should help in setting up your HDD for use on your computer.
    Please post back with the results of your troubleshooting, and I will diligently follow up with you!
    Cheers
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • [solved] Dependency hell with redland and redland-compat

    It seems that redland and redland-compat are in conflict, but both are required.
    I notice that the installed version of redland-compat provides redland, but the new version does not.
    $ pacman -Qu
    redland-compat 1.0.12-1
    skype 2.1.0.81-5.1
    $ sudo pacman -Su
    :: Starting full system upgrade...
    warning: skype: ignoring package upgrade (2.1.0.81-5.1 => 2.2.0.25-1)
    resolving dependencies...
    looking for inter-conflicts...
    error: failed to prepare transaction (could not satisfy dependencies)
    :: audacity: requires redland
    :: libreoffice: requires redland
    $ sudo pacman -S redland
    resolving dependencies...
    looking for inter-conflicts...
    :: redland and redland-compat are in conflict. Remove redland-compat? [y/N] y
    error: failed to prepare transaction (could not satisfy dependencies)
    :: redland-compat-storage-virtuoso: requires redland-compat
    :: soprano: requires redland-compat
    Last edited by jlindgren (2011-04-28 03:41:39)

    sl1pkn07@sL1pKn07 pacman.d]$ yaourt -S redland
    Contraseña:
    resolviendo dependencias...
    verificando conflictos...
    Objetivos (2): rasqal-0.9.25-1 [0,22 MB]  redland-1.0.13-1 [0,18 MB]
    Tamaño total de descarga:   0,00 MB
    Tamaño total instalado:   3,44 MB
    ¿Continuar con la instalación? [S/n] s
    (2/2) verificando la integridad de los paquetes                                                                                                [---------------------------------------------------------------------------------------] 100%
    (2/2) verificando conflictos entre archivos                                                                                                    [---------------------------------------------------------------------------------------] 100%
    error: error al realizar la transacción (archivos en conflicto)
    redland: /usr/lib/librdf.so.0 existe en el sistema de archivos
    redland: /usr/lib/librdf.so.0.0.0 existe en el sistema de archivos
    [sl1pkn07@sL1pKn07 pacman.d]$ yaourt -Qo /usr/lib/librdf.so.0
    /usr/lib/librdf.so.0 es propiedad de redland-compat 1.0.12-3
    [sl1pkn07@sL1pKn07 pacman.d]$
    sorry. menssage in spanish

  • 6528LE and Heatsink/Fan

    I have a p4 1.7 ghz cpu on a MSI board 6528 LE.
    Last month we moved, and the sink and the CPU have become unbonded. I remmeber the reseller icluded with the order that it has to be bonded with something special. Does anyone know anything about this?
    The computer will not even post unitl this is fixed.
    Thanks..
    KCI :O

    Do you mean the thermal compound between the CPU and heatsink?
    You only need a simple white silicon based compound for that, it should cost around 1$.
    Since the P4 has a heat spreader there is no point in buying anything expensive unless you can't find anything simple.
    Don't use silver based paste since it is usually not fluent enough for the large surface and can short things out if it get's in the wrong place.

  • RosettaNet and its Compatability with C-folders

    Can I please get some info about RosettaNet and Its compatability with C-folders....
    its urgent
    regards
    jay

    I would imagine since SEEBURGER is involved in integration solutions
    <i>For 20 years, SEEBURGER has been the expert in SAP business integration. More than 1,200 SAP customers both large and small – utilize our B2B/EDI solutions and expertise to connect with their applications and trading partners.</i>
    http://www.seeburger.com/index.php?id=sap&no_cache=1&sword_list[]=SAP
    Unfortunately I have no way of testing but perhaps someone will see the new activity in the thread and pop in.

  • Backwards and upwards compatibility on essbase, EAC and Analyzer

    we have running essbase/analyzer/EAC 7.1 environment and a running essbase/planning 9.3.1 environment.
    It occurs to us that modifying the 9.3.1 environment with the EAS7.1 tool results in a essbase crash (without any information in the essbase log files).
    Is there any information for essbase about upwards and backwards compatibility from 7.1 and 9.3.1.
    Message was edited by:
    Detlev

    In addition to Nathan's comments this would be a platform that Oracle hasn't regression tested. So even if it were to appear to work if you encountered an issue Oracle would be justified and asking you to re-create the same issue on a supported platform.
    In my opinion if this is a production application this is a risk you should not take.
    If you are playing with an internal environment and want to learn more about Win2K8 that's one thing. Realizing most folks will give you the "It's not supported line" when you start asking why EPMA, FDM, and HFM do not work with IIS 7.x
    Regards,
    John A. Booth
    http://www.metavero.com

  • KT4V and KT4Ultra problems: IRQ, Password, TV Tuner

    Heya!
    I just purchaced new KT4V board and now I'm experiencing quite a few troubles. Before that I had K7T266a Pro2 board with which I was very setisfied and all the features that I will mention here that does not work with KT4 but on older MSI board worked without a problem.
    1st problem:
    I'm unable to force IRQ for PCI slots. I manualy select which IRQ will PCI slot take but that is not accepted. IRQs are allways assigned automaticaly.
    2nd problem:
    Wake Up with specific key, password and mouse is not working. I also updated to new bios for that board and that does not help to solve the issue
    3rd problem:
    ATI TV Wonder is not presenting any picture. Neither under Windows 98SE, neither under Windows XP. There is a black picture when I start ATI TV Wonder but I can hear a sound. (My friend also has this issue on KT4 Ultra board)
    Changing the board back to K7T266a Pro2. All is working well!
    Does any of you have some of this issues with KT4 boards? Help is appreciated!
    Ciao, Davor.

    Maesus!
    First thank you for envestigating at MSI and confirmation that Wake Up with password was removed. Yes I know that S3 means. It means wake up from the sleep mode. But I think that also there is not working as It is should. I tried to set the Wake up password and i put my computer to sleep mode but I could wake it up prassing any key or moving mouse (typing a password did not worked) I had an option Wake up with password in my bios!
    So what I tried already. First I will have to explain that I used Windows 98SE (old installation - Installation that I already used with K7T266a Pro2) and Windows XP SP1 (fresh installation) on second partition.
    1. I did a fresh install of the Windows XP on a second partition and only Graphics drivers for Radeon 8500 and ATI TV Tuner.
    2. Did not tried that yet
    3. Will have to play a bit with this. I tried only two values 64 and 128Mb
    4. I had via 4in1 4.43 under Windows 98se; under Windows XP SP1 I did not load any new Via 4in1 drivers
    Will have to try with this latecy patch at my friend.
    5. I disabled APIC (but will try that once again to be sure)
    6. I did tried with minimal hardware installation. Only Radeon 8500 and ATI TV Tuner (I tried different slots)
    7.  Did not tried with different PSU. My friend has more powerful PSU than I and experiencing same problem. I think PSU is not an issue coz KT4 board was very stable in all other applications (especialy games, 3DMark2001) no crashes, runing great.
    8. Tried with Windows 98SE and Windows XP. I tried also with ATI Multimedia Center 7.1 and 7.6 beta. Neither worked. Just a black picture, channels are found, I can hear the sound
    9. I tried with different mother board. Im back with MSI K7T266a Pro2 and ATI TV Wonder PCI is working wonderful. I can assing IRQs manualy and I can wake up my machine with password - I like this feature.
    10. I put msg also to Rage3D forum asking users if anyone has this sort of configuration MSI K4T and ATI TV Tuner. I found out that direct support is sometimes less efficent. So I like to ask directly from the first hand - users.
    Will have to try all that your new propositions at my friend house who has KT4 Ultra and ATI TV Tuner PCI (I already sold my KT4V and I'm back at K7T266a Pro2 till I discover all the solutions for the problems.
    Tnx for now Maesus!

  • MSI KT4V and radeon card compatibility.

    hi guys...first of all, sorry about bad english, i'm from germany.
    well, the point is, i actually have a MSI KT4V mother board installed in mi pc, and i planed to buy a Radeon 9800 pro graphic card, i have 2 options...buy the BBA (build by ati)..or the sapphire one, i want to know if i will have any trouble of compatibility with both of this cards. Just that, please i'm waiting for your's answers guys

    Codegen don't perform as well as you might think. The info I ask for should be on a sticker on the PSU, inside the case. But I'll help you, since I've been there before.
    As you see below, there is not much room for a Radeon9800:
    "Codegen 400W Pentium 4 ATX Switching Dual Fan Power Supply, Retail Package
    Output:400W
    +3.3V -> 14A Orange
    +5.0V -> 30A Red
    +12V -> 12A Yellow
    +5VSB -> 2A Purple
    -5V -> 0.5A White
    -12V -> 0.8A Blue "
    The info comes from:
    http://www.dealsonic.com/co40pe4atxsw.html

  • Trouble with kt4v and floppy drive

    Just bought a KT4V mboard an XP2600 and 512mb 333mhz ddr ram
    Thing is i need to update the bios to get my processor runnin at the correct clock speed but the floppy drive doesnt work:
    its detected in bios and everythin seems to be ok until i try and use it, the green light on the front of the drive stays on all the time (starting as soon as the power is on), even when theres no disk in it.
    Has anyone had any diffculties like this, ive checked the cables but not sure if ive forgotten to connect something up on the mboard??
    any help much appreciated, thanx

    Hi,
      I pulled a 3 year old Fully Working floppy disk drive from an Asus mobo,tried it in a KT3V and now my KT4V-6712,Exactly the same problems as you Manoah,also tried 3 diff cables,(you must use the one provided,red?).
    I suspect a "factory fresh" disk drive needed,anyone know any compatable brands?

  • MSI KT4V and Barton 3000+ crash problem

    Hi all!
    I recently upgraded my PC (MSI KT4V) with an AMD Barton 3000+ CPU. Before I had a 2600+ Throughbred.
    With my old 2600+ I could run my system stable with a FSB set at 166. It couldn't go much higher that 175 before the system became unstable.
    With my new Barton I have a problem :
    With my FSB set at 166 games like Far Cry and COD crashes. Explorer crashed at sites with Flash content (flash.ocx error report) otherwise no problems. My Pinnacle studio 7 program couldn't render playable movies.
    After I underclocked my CPU, setting the FSB at 154 giving me a total speed of 2GHz, all problems are gone now  
    My system reports a CPU temp at 48 degrees celsius at a 166 FSB setting but could it be a cooling problem anyway?
    I have used Artic Silver as thermal paste on the CPU die.
    I have reset my memory timings to CAS 2,5 even though the Corsair RAM supports CAS 2 to get the most stable system.
    Is the KT 400 chipset up for the job with the increased speed?
    I would like to get the most performance out of my new Barton so I hope that some of you guys can help me out here.
    My system spec is :
    Win XP SP1 and SP2
    CPU : AMD Barton XP 3000+
    Motherboard : MSI KT4V (Bios 1C0)
    Soundcard : SB Audigy 2
    Graphics card : Radeon 9800pro 256
    Memory : 1GB Corsair XMS (CAS 2)
    Power suply : Antec 480W
    All latest drivers installed
    Best Regards
    Basse

    Hi Osnavi!
    48 degrees is an idle temp and about 51 stressed.
    The processor is an Athlon 3000+ 333MHz
    The cooler is a Thermaltake Silent Boost
    I have 2 modules 512 MB Corsair XMS PC 2700 333MHz placed in slot 1 and 3
    I forgot to tell that I ran memtest386 with the fsb set at 166 and I had error reports on the 128Kb L1 cache right away. Lowering the fsb to 154, the memtest came out alright.
    Should I remove the heatsink and reaply cooling paste - silver-free maybe?
    Strange  
    Any ideas are welcome
    Best regards
    Basse

Maybe you are looking for