KT4V : Floppy disk issue with Windows XP

Hello,
My system :
- KT4V motherboard (Bios version 1.5)
- AMD Athlon XP 2100+
- 512 Mo Ram nomane
- 1 PCI card SATA
- Radeon All in Wonder (7200)
- 1 HD Maxtor 40 G IDE ATA 133
- 1 HD Maxtor 80 G IDE ATA 133
- 1 HD Maxtor 80 G SATA (pluged with SATA card)
- 1 DVD-Rom player (Pioneer)
- 1 DVD recorder (NEC 3520)
My problem :
- impossible to read a floppy disk under Windows XP however, I can boot on floppy disk. I've got a message "floppy disk not formatted". With another PC, I can read this floppy disk.
I've installed another HD and installed Windows Me. In this case, I can read the content of floppy disk.
Do you think that a new Bios will solve this issue?
Thanks by advance.
Best regards.

I've tried to reinstall Windows XP... same problem
I've tried to change my floppy disk reader and the cable... same problem.
I've upgraded my bios this evening... same problem.
I don't understand why....
If I try to format the floppy disk, windows says Impossible to format ! and after the floppy is unreadable even with another computer.
Another problem :
I've connected on the first IDE :
- Maxtor ATA 133 40G (master) (6L040J2)
- DVD reader (slave)
on secondary IDE :
- Maxtor ATA 133 80G (master) (6Y080L0)
- DVD recorder (slave)
The Bios doesn't recognized the second HD (80G). I don't understadn why? Any idea?
Thanks by advance.
Best regards

Similar Messages

AirPort Disk - Issue with Windows Vista Ultimate

I setup an AirPort Extreme network, with a shared USB Drive and so far I've only found one issue.
When attempting to create new files and renaming them, or rename pre-existing files on the shared USB Drive using Windows Vista Ultimate I get the following Yes/No dialog:
"The Z:\ folder does not exist. The file may have been moved or deleted. Do you want to create it?"
Then there's information about the mapped drive. If I click "Yes" in the dialog, then the dialog goes away for a moment then pops back up. I can't create a new file directly on the shared AirPort Disk, nor can I modify or create and rename new files on the disk without getting stuck in the loop.
I can, however, create a new file locally on the Vista box and copy it up, and I can even create a new directory locally with files and copy them up without issue.
Now, the issue does not happen when I use my MacBook or my XP machine. This issues seems to be a Windows Vista issue only, and I haven't seen anyone else reporting it.
Here's information about the disk share implementation:
- The disk is password protected (turning on accounts really breaks the ability of Windows Vista to work with the disk)
- The disk is Mac Formatted with Case Sensitivity, and Journaling
This works like a top for OS X and Windows XP, just not Vista. I'd like to getting working properly for all machines.
If anyone's got some advice on this one, I'd love to hear it.

Here's a little more information regarding the issue:
- It's an AirPort Extreme Wireless Router with Firmware ver. 7.1
- The Windows Vista Ultimate PC has the most recent Microsoft patches to-date, and has the most recent Apple Airport Utilities Software to-date.

Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right?

Major Issues with Windows XP and Sound Blaster Audig

As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

Weird issue with Windows Server 2008 R2 Print Server

I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server.
Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors.
We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems.
If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping.
Has anyone experienced anything like this? Any tips on how I could possibly resolve it?
Thanks in advance.

Hi,
According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
>>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
ipconfig /flushdns
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Itunes issues with Windows having to do with Apple's patent

I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Itunes issues with windows 8... laggy?

anyone one else having abit a of laggy issue with playing music on windows 8?
i just upgraded to windows 8 con. preview, and its great and fast.
i use to have windows 7 and itunes never skipped a beat.
i have a sony viao with an upgraded ram and ssd hdd.
and its pretty fast.
so i dont think its my computer and windows 8 seems to be fine.
anyone else having this issue? but it only happens now and then.......
NOTE:
i have my music all copied to my sdd hdd aswell
and thats all thats really on there as i have ext. hdd's.
i have a average size library in itunes with around about 50gb of music.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

I have called HP-Support and the answer was:
«Thank you for contacting HP Active Chat Support.
This is in continuation to our response with regards to your chat ID: 63381567
As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
Start the computer.
Press the F10 key to enter the BIOS setup.
Select Restore Defaults .
Under Load Defaults , select Yes .
Choose Save Changes and Exit .
Under Save Changes and Exit , choose Yes .
If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
Open Control Panel .
Expand View by: and select Large Icons .
Click Administrative Tools .
Double-click Services .
Double-click Telephony .
Under the General tab, expand Startup Type , then select Automatic .
Click Apply , click Start , then click OK .
Restart the system.
If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
The issue was not resolved.
So I'm waiting for the release of the new driver...

Is there a known issue with windows 8 supporting itunes?

each time I update itunes I lose my itunes store connection and therefore can't update apps etc. Is this a known issue with windows 8 users?

Yes. Some are complaining.
Search iTunes.exe. RIght Click, Properties, Compatibility, Click Run this program as Adminitrator. OK.
See if this helps

Where is the forum for Windows Update issues with Windows 10 TP 9926

Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

Might try them over here.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

Hello SAP community,
I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
But when I click than on NWA (example), I am getting "http 500 server error".
I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
Than it is working without problems with Windows 7 and Internet Explorer.
I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
Thanks for your help.
Best regards
Carlos

Hi all,
I think I found the solution.
The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
Internet Explorer Options => Settings for compatibility view => Add domain
Best regards
Carlos

When will there be an itunes update that resolves the compatibility issues with windows 8

When will there be an itunes update that resolves the compatibility issues with windows 8

I hadn't heard there are issues. Can you tell me what the issues you have run into are? I just downloaded it yesterday on my new laptop and I am having issues syncing today...

SSLVPN connectivity issue with Windows 7 x64 All browsers.

I think that I have tried everything to get this working but whatever I seem to do I cannot connect to my SSLVPN using Windows 7 x64. The 32bit version is fine. I have installed the Microsoft C++ Redistributable 2010 and 2005 for both x86 and x64. I have tried clearing the cache in the Browser. I have installed Chrome and Firefox , I even started my laptop using the 'Disable Driver Signature Enforcement' from Advanced Boot options but nothing is working.
Does anyone have anything else to try. This is a bit of a showstopper for us because not do we have this issue with Windows but we have Mac users as well and that is also an issue.
Cisco really needs to fix this issue fast...
Please help.
Thanks
Mark Sheehan

Try using both the 32-bit and 64-bit versions of Internet Explorer. Sometimes one of the two will work.

Putting pictures on System 7.1 with floppy disk created on Windows PC

Hi all, I have a Quadra 605 on system 7.1 that I've been experimenting with, would like to get some pictures transferred onto it. I tryed using apple file exchange which is on the Quadra to read a Windows DOS formatted disk with some pictures on it. I was able to copy the files from the disk to the hard drive on the Quadra using file exchange, but when I click on the icon to try to open the picture, I get a message that it can not be opened because the application program that created it can not be found. Is there something else I need to install on the Quadra to open a JPEG image or is there another way to go about doing this? I will not be able to connect the quadra to the internet, all I have is the floppy disk drive, there is no USB port either. Also, I have an iMac on system 9.2 that I copied some pictures to a floppy using the external floppy drive on the iMac. It would open the disk on the Quadra without using file exchange, but it wouldnt open the icons either - I would get the same message that the application program that created it can not be found. Anyhow, I have the iMac on system 9.2 that I can use as well if need to be.

An appropriate 68k version of the shareware program GraphicConverter could be one possibility.
http://www.lemkesoft.com/content/207/download-old-versions.html
An older web browser could be another. Try to open the file from within the application (via the Open dialogue); do not just double-click on it.
However, if not already available, one problem would be to transfer a program to the Quadra 605 if the file size is over 1.4 MB.
Some compression utilities can segment larger files for transfers on multiple floppies, but that would require compatibility on both sides.
Another way could be to use a null-modem cable between a DB-9M serial port of a Windows PC and the MiniDIN-8F Modem Port of the Quadra. The null-modem link can be created by connecting a PC-style DB-9F to DB-25F null-modem cable together with a normal Macintosh DB-25M to MiniDIN-8M hardware handshake modem cable. Normal communications software can be used on both computers (for example, the communications section of ClarisWorks on the Mac, and HyperTerminal on the PC). Do keep a Mac program file downloaded onto a PC in its encoded/compressed state (that is, hqx, bin or sit) until on a Macintosh computer.
Jan

ITunes and iPhone 4 sync issues with Windows 7 64 bit

I am getting several errors with sync'ing iTunes to my iPhone on windows7 64bit. I reinstalled iTunes, I did a repair on iTunes, even tried a RESTORE on iPhone, but it gives me so many errors one after another after another.
1. Some of the items were NOT copied to iPhone "iPhone" because one ore more errors occured.
2. Attempting to copy to the disk "iPhone" failed. An internal device error occured.
3. The iPhone "iPhone" can NOT be synced. An unknown error occured (0xE8004006).
4. The iPhone "iPhone" can not be synced. The required file can not be found.
5. The iPhone "iPhone" can not be synced. A duplicate filename was specified.
6. The iPhone "iPhone" can not be synced. An internal device error occured.
These errors keep appearing one after the other.
I have fully uninstalled iTunes and ALL Apple programs from my PC, rebooted, disabled antivirus/firewall software, etc.
I have tried changing time zones.
I have created a new user account on same laptop and still have same issues with iTunes.
Restore fails with error "Unable to read file or file is corrupt".
Yet iTunes works fine on a 32bit operating system of Windows 7.
The problem is that I upgraded my laptop and the new laptop is Win7 64bit. I have ALL the newest drivers, and I checked to ensure it was not a BIOS or CHIPSET driver causing issues. All windows updates are up to date and current.
I have been trying for over a week with every piece of trouble shooting I can find to make this work.
Any help or further information would be VERY GREATLY APPRECIATED.
Thanks in Advance

I too am having the exact same issues on the same laptop! I spent an hour last night with "supervisor" in tech support who didn't solve my problem but did close the ticket (210757099 for any Apple people that might read this). Thanks a lot Ben!
I have seven ipod/iphone/ipad devices so I am very familiar with how to sync. In the last few weeks, version 10.2 of iTunes (I'm up to 10.2.1.1) has gotten less and less reliable in successfully sync'ing to the devices. It started out with my 3GS, but my iPhone 4 was fine. Then I got an iPad2 and now NOTHING will sync properly. Every time I plug one in (or press the sync button) it wants to do a restore from the backup made the last time it sync'd. It does that, reboots the device and sync's.
I've gotten a ton of errors, here's a sample.
iBooks couldn't be installed on my iPhone unknown error 0xE800000C
Textie couldn't be installed on my iPhone, unknown error 0xE8000013
"failed required file not found" - This is one of my favorite error messages. It demonstrates how Apple is becoming like Microsoft. It is 100% accurate and totally useless. It would be helpful if it told me the NAME of the file that was not found...
unknown error 0xE8004006
"duplicate file found" - Again, in true Microsoft form, it didn't tell me the NAME of the file that was duplicated.
I tried everything discussed in the following thread but it did not work.
http://discussions.apple.com/thread.jspa?threadID=2401822
Stopping the enhanced USB controller didn't work. Mine is the Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller (version 9.1.1.1020).
A few days ago I got hundreds of errors in a sync. When it completed, a dialogbox came up asking if I wanted to send this crash report to Apple, I said yes. So, crash reports are now automatically being sent. You can see evidence of this in the %appdata%\Apple Computer\Logs directory.
This section of the log looked interesting because it says it couldn't connect to USB mux port 32498
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 4232): Could not receive size of message: 0 No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] readthread (thread 4232): Could not receive message: 0xe8000001
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionSendMessage (thread 2504): Could not send message size: No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] connect_toport (thread 5700): Could not connect to USB mux port 32498 for device 3: Input/output error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] MobileDeviceConnectlocked (thread 5700): Could not connect to lockdown port on device
Just grasping at straws here....

KT4V : Floppy disk issue with Windows XP

Similar Messages

Maybe you are looking for