KT4V keeps losing lan driver after shutdown

Hi All
Was wondering if anyone came across this problem... just bought a kt4v when i upgraded my wifes pc the lan controller says it is via vt6103 lan controller but there are no drivers on supplied cd also when the pc is shutdown it loses the network adapter drivers so everytime it boots up from being shutdown i am having to install the drivers again. If anyone has had similar problem please let me know.
Thanks in Advance
John

Definitely go with the driver Bas suggested. Since you didn't really say where you got your original driver from (I am willing to bet anything the driver is on the CD but hidden really well), I would warn against using drivers that Via might supply. In my experience, I've come across problems using those drivers for such devices (modems have been the worst for me ). I like to stick with the drivers provided by whoever makes the motherboard, add-in card, etc. Though, I will say that Via 4in1's and nVidia Detonators have been pretty good, usually because video card and motherboard manufacturers, like MSI, don't make unique drivers necessary to the best of my knowledge (they just post the same ones about a month later ). Anyways, I have that board, and I haven't had a problem with it.

Similar Messages

Dynamic Smart Array B220i RAID Controller keeps loosing Logical Drive after power shutdown.

Hi, I own two HP Microservers Gen8. I added SSD drive on the DVD SATA port in both. I created Raid 0 over the SSD Drive that I can boot from it, but everytime I shutdown the box (power outage), the logical drive is lost. Note that the logical drive is not lost on reboot. Only when the box is is shutdown. Any ideas why is this happening? Here are repro steps: Enter Smart Storage Administrator
Select onDynamic Smart Array B220i RAID CtrollerClick on "Unassigned Drive" Screen shows me:SATA HDD:
- 3TB Port1:Bay1
- 3TB Port2:Bay2 SATA SSD
- 120GB Port5:Bay5 I selected Sata SSD drive in Port5:Bay5I clicked on "Create Array"
On a next screen I select the following:
I selected RAID 0, 256 KiB Stripe Size, 32 Sectors, Maximum Size
I click on "Create Logical Drive" On a next screen:
A message: Logical Drive was successfully created.
I click on Finish
I exit the Smart Storage Manager and reboot the system. The server boots from the Raid0 Array (Sata SSD Drive in Port5:Bay5) -> No problem If I just reboot the server, it boots from the Raid0 Array. - No problemIf I shut down the server (or during Power outage), the Smart Array tells me that there is no logical array during the boot. The boot fails. -> Qualifies for a problem.
Please can you explain why is the logical drive lost after power loss? Why the controller does not remember the setting? Other details:- Dynamic Smart Array B220i RAID Controller (v3.54.0)- When I boot to Smart Storage Administrator after power failure, I can recreate the Raid 0 over the SSD drive and boot again - this a work around the issue. Thank you for your advise.Jiri

Hi QUANT,
Your Proliant server is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Keep email page active after shutdown

keep email active after pc shutdown and turned back on...so don't have to reenter the user name/ password again...

Details like websites remembering you (log you in automatically) are stored in a cookie.
*Create a cookie 'allow' exception to keep such cookies, especially in case of secure websites and when cookies expire when Firefox is closed.
*Tools > Options > Privacy > "Use custom settings for history" > Cookies: Exceptions
Let cookies expire when you close Firefox.
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: Keep until: "I close Firefox"
Create a cookie 'allow' exception for cookies that you would like to keep and have websites remember you.
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: Exceptions

Keep losing mapped drives

Hey everyone...
Few weeks ago I got a shiny new 21" iMac (Intel Core 2 Duo, upgraded to 8 gigs RAM) and have been running into intermittent connectivity issues that are driving me crazy....
After much searching around, I found a "how to" helping me with an Automater script to mount and map some drives that are on another server here on my home network upon starting up.... Among other things storage-related, all my iTunes stuff is on this other server and I have my library set to use this mapped folder
On a pretty consistent basis, the iMac forgets these mapped drives in Finder...
This is causing issues when even trying to open iTunes as the assigned location cannot be found... or i'd be playing some music or podcast and BAM, iTunes coughs up a hairball because the computer lost/forgot the mounted drive locations.....
Any tips on what I can run/look-into? This happens both wired (DHCP addressed) to the network or connected by WiFi (Netgear N-router)... though it happens much more frequently when connected via wire.....
Only other helpful piece of information I could provide is that I did download and buy "Little Snitch", not sure if that could cause any issues or what not.....
Thanks in advance
- Stephen

What will that do?
UPDATE: Even more confused now. Now, the iMac sees my PC desktop and some other device (the name is a seemingly random string of numbers???) which shows nothing if I select it. However, the network drive does not show up under devices. BUT, even more weird is that in iTunes, the network drive does show up in Shared (I think). And even more weird than that, my AppleTV shows up now even when it's turned off. Used to be it only showed when it was powered on.
Needless to say, I am struggling to understand what appears to be random connection of devices on the LAN.

Time Machine Keeps Selecting Different Drive After Restart

Here is my situation, which is a bit different from most people's I think:
I have a Mac Pro running 10.5.5 with 4 internal hard drives: 250GB Original, 750GB, 750GB, and a 500GB. I also have a MacBook. I used to have things setup so that my iTunes for the Macbook was stored over the network on a 750GB drive, and the Mac Pro AND the Macbook had their Time Machine files on the 500GB.
Then I switched things around so that the iTunes is now on the 500GB and the Time Machine is on a 750GB. I used "restore" in disk utility to copy over the Time Machine files (although this worked it could only be done a specific way after much trial and error - ask for details if interested). It worked, and the Mac Pro backs up flawlessly right where it left off on the new drive.
The Macbook WILL find and load the old sparse file from its new location. But I have to manually select it EVERY TIME. The problem is that despite the fact that I completely erased the 500GB drive first, it stills defaults to that drive for TM. AND this is AFTER I have thrown out the time machine preferences from the library. It will work fine for infinite backups as long as I don't shut down the computer. As soon as I restart, it defaults back to the other drive and I have to repeat that cycle all over again of throwing out the preferences, changing the TM disk, and it is never easy to get it to "see" the drive I want...etc.
Any thoughts much appreciated!

Glenn,
Thanks so much for your reply. Unfortunately that did not work. As soon as I connect to my iTunes drive, I can see the name of the backups volume change in the TM preferences pane from "backups" (what it should be) to "music."
In the interest of presenting as much info as possible, I will add that I always have to select my iTunes folder before opening the Itunes app. I had it set up before (when drives were reversed) so that my "music" volume would open as a login item, since I was tired of doing it manually every time. The TM just mounted normally whenever it needed to. It worked perfectly. I thought that maybe I could fix this current problem by having BOTH my music and backups volumes mount at startup. Interestingly, even if I select them both, the mac will only mount one or the other, not both - in fact one of the drives disappears from the accounts>login items pane after startup as if I had never put it there! It CAN mount two drives though if I select another, third drive that I also have shared that is neither for music or backups. Just not THESE two. I am at a loss....I am pretty sure I erased these drives before making the switch - I know one of them I even wrote to zeros.... Thanks again.

Linksys WRT320N Problems. Keep losing speed day after day

Hello,
I have a nasty problem and I absolutly got no clue on how to fix it.
A couple of days ago I installed my new WRT320N router in combination with 50mbit speed from Ziggo (netherland internet provider)
At day one speedtest.net always gives 47/48 mbit down and 5 mbit up.
But after a few days the router keeps dropping and dropping and dropping till about 2mbit.
Now I've resetted the router and also rebooted the modem for new software etc but still nothing works.
Ive also tried to reset the router to Fabricage settings and that worked .... until it went lower day after day.
I also took some tips from this forum which was MTU setting to 1350 on manually instead of 1500 automatic and that worked... until some days passed and again ive got 10mbit today.
I'm clueless and in desperate need of your help!
What setting keeps dropping my router speed from 50mbit to almost zero in a couple of days each time?
Thank you in advance!
Rens Voeten
Edit Each time i switch the MTU to 1500 and then again to 1350 makes the speedtest.net meter jump up to 50mbit again like crazy.
But if i want to leave it, it will decrease again day after day.
Message Edited by Rabbitto on 09-28-2009 12:24 PM
Message Edited by Rabbitto on 09-28-2009 12:25 PM
Solved!
Go to Solution.

Login into the Linksys setup page and Click on Subtab Advanced Wireless Settings under Wireless tab...Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
If the above settings doesn't works then try to reflash/upgrade the firmware of the router.Download the firmware from www.linksys.com/downloads and save it on the desktop.Now go to the linksys GUI and click on the Administrator tab and then subtab "firmware upgrade" to upgrade the firmware.

My Magic Mouse and Mobee charges seems to lose the connection every day. I've used it with no problem for about 6 months or so, no it keeps losing connection even after recharging overnight. Any ideas?

I seem to lose the connection of my Magic Mouse often, daily and sometimes several times during the day using the Mobee charger even after charging overnight. Ideas?
The charger is plugged into my Cinema Display and has worked fine for 6 months or more.
Thanks !
Ira-

Thanks Steve-
The problem seems to have just gone away.
I wrote to Mobee, and their answer is to take the batteries out, recharge and see if that does the trick.
Having been through this once before, and sending pictures along of the MM, which didn't help, it was just an oddball problem that has gone away.
I'll keep an eye on things.
I guess it's just one of those mysteries of Apple and the third party.
Thanks for taking the time to answer,
Ira-

My macbook keeps losing wifi connection after restarting and I can't connect to my wifi in recovery mode

I have two problems actually, which I think are connected.
I installed a new hard drive and am in the process of returning my macbook pro to normal. I'm now using Mac OS X 10.6.8 and I want to be able to update to OS Lion.
When my computer is on it can connect to our wifi without any problems (so the password is working). However, everytime I restart, it looses the connection and does not automatically reconnect. This never happened before and I can't seem to figure out where I can change this. All I have to do to reconnect is go to the wifi symbol and choose our wifi code. It then automatically connects without me needing to type the access code.
The seconde problem is when trying to update to OS Lion, when in recovery mode, all I get is a screen asking me to connect to wifi. I choose our wifi and now I do have to type a password, but whatever I do, it does not accept the code. It has nothing to do with capslock or anything like that.
We are sharing our wifi with our neighbour, so changing the password is not an option. But is is just a simple letters and numbers password.

Why not do a "Restore" in iTunes to set it back to factory settings? That will eliminate any previous information that is causing you issues in use. You will have an iPod which you can sync as if it is new with your settings and info.

Dynadock V Keeps Updating same driver after restart and wont connect to external monitor

Earlier this week dynadock did an update and now everytime my computer turns on it installs the same update and says successfully installed. Ever since this started my second monitor connected through dynadock is not working. I've checked cords, cycled power to everything and still the same.

Performed system restore as far back as it would allow me, but i do not believe that it was far enough. Still had same problem. I attempted to uninstall only the video driver, and it failed, so i attempted to uninstall all of dynadock and everything but video driver uninstalled it failed again. restarted tried again failed again. So i'm running the install cd now see if maybe i'll get lucky and it'll work it'self out. but i doubt it.
Any idea how to get the video driver uninstalled? I can't find it under device manager either.

Mac pro losing internal drives after GPU upgrade

I've recently added a PC style 3GB graphics card (NVIDIA GeForce GTX 660) to my early 2008 8 core mac pro.
Apart from living without the boot logo, this has worked very nicely...
But since then I've had some clicking/chirping noises, especially when running graphics intensive apps (e.g. Video editing, some 3D heavy games), and have subsequently lost one of my four internal drives (my iTunes media library), and another drive regularly 'ejects' during these periods.
Is this liable to just be drives failing, or possibly a psu issue, to do with powering this new card?
Has anyone else had issues running 4 internal drives, with a video card like this?
Any thoughts/suggestions would be welcome, thanks!

Beg your pardon, I've just checked again, and the card does just use a 6pin connector. Sorry got confused.
The card lists its minimum requirements as a 450W psu with min 24 amps on the +12V rail (based on i7 3.2 machine)
Does that narrow things down at all? For the record, with only 2 drives mounted at the moment, I still get the odd click from the machine when under some graphics load. Thanks for the replies.

Keeps losing audio driver

I have the toshiba satellite M305D-S4830. I went to download the audio driver located on the website but it didn't work. I called toshiba support and they told me to do a system restore and it worked. 2 days later the audio driver was gone again. I feel like I shouldn't have to do a system restore everytime this problem happens. Can someone help me with another thing to possibly do??
Also if it help I have Vista 64x
Solved!
Go to Solution.

Satellite M305D-S4830
Let's try it again...
Conexant Audio Driver for Windows Vista
driver_audio_conexant_os2008391a.exe
Follow these instructions...
--------------------8<------------------- <snip> ------------------
1. Save this file to a convenient location such as the Windows Desktop
2. Uninstall the existing Conexant Audio Driver by clicking Start, Control Panel,
   Uninstall a Program under the Programs heading, Conexant HD Audio, then Uninstall.
3. Restart the computer.
4. On the Windows Desktop, double-click the downloaded file to start the installation.
   a. If a User Account Control message is displayed, click Continue.
   b. Click OK, Unzip then OK again.
   c. Answer the remaining prompts to complete the display driver installation.
   d. Restart the computer.
--------------------8<------------------- <snip> ------------------
-Jerry

Keep losing all contacts after restoring to back up. Help?

Everytime I restore to a back up for my old contacts, they vanish after a few minutes, sometimes seconds. Can anybody help?

If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.

Launchpad keeps losing folder setup after Mountain Lion upgrade

Hi experts !
Since upgrading to Mountain Lion I've noticed an irritating issue with Mountain Lion... Launchpad loses the folder organisation I set up every couple of days!
I can restore the folders from launchpad backup and it will be fine for a short period but, seemingly randomly, it resets to individual items. When this happens if I look in System Prefs>Launchpad all the items are shown individually and ticked.
All the apps launch ok but this is just irritating as it's a pain to scroll through the screens to find the app I want ( yes I know I could use Launchpad search but the point of folders is to make it simpler ! )
I've looked in system log for any error string with "Launchpad" but nothing.
Any ideas... anyone else suffered from this?
Cheers
Iain

Hi experts !
Since upgrading to Mountain Lion I've noticed an irritating issue with Mountain Lion... Launchpad loses the folder organisation I set up every couple of days!
I can restore the folders from launchpad backup and it will be fine for a short period but, seemingly randomly, it resets to individual items. When this happens if I look in System Prefs>Launchpad all the items are shown individually and ticked.
All the apps launch ok but this is just irritating as it's a pain to scroll through the screens to find the app I want ( yes I know I could use Launchpad search but the point of folders is to make it simpler ! )
I've looked in system log for any error string with "Launchpad" but nothing.
Any ideas... anyone else suffered from this?
Cheers
Iain

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

Keep losing DWC130 external USB drive

I keep losing the connection to the DWC130 External USB drive on Windows 8.1. If I leave a Windows Explorer window open, after 10 minutes or so when I go to the external Toshiba drive its like it has lost its connection. The drive dissappears from the list of connected drives, and after a few seconds a new window opens with a refreshed connection to the drive. Why do I keep losing this live connection to the drive? How can I stablize this?

I read something about some of these external drives needing more power, even when plugged into the USB 3 port. The article suggested a "Y" connector to allow the one drive to plug into two USB 3 ports simultaneously. I guess that's possible, but before doing so I'm going to call my local computer center today where I purchased the hard drive to see if they know of this problem and how to resolve it.
Actually, that is NOT possible. The DWC130 external drive has a power adaptor and plugs into an outlet for its power source. So, something else is at play here.

KT4V keeps losing lan driver after shutdown

Similar Messages

Maybe you are looking for