Kt4v possible problem with bios 1.8 and hd

Any Idea anyone with this one.
system running well till the other day when hd went very slow even after defrag, install bios 1.8 and reset the bios and adjusting it for my setup. Come to check my harddrive with maxtor powerdiag 3.04 and could not find the drive or any other drives connected. In the bios setup the drive is present. I removed all drives, cdroms, etc except the maxtor main hd and tried again with the same result. After placing in an ata100 controller card in to a spare pci slot and plugged the hd on to it, that the software sees the drive. The test finished and show the HD to be fine.
The question is do I have a problem with the onboard contoller or with the new bios or both.
When I first got this MB I did the same test with the original bios and the hd connected to the MB controller and the software had no problem seeing that and other drive connected.
my pc
6712 mb kt4v
athlon 2700+
ti4200 graphics card
2 off ddr333 512Mb memory
floppy drive
sony cdrw
system software windows xp pro
hard drive maxtor d740x-6l 60Gb ata133

I'll stick with the V1.10, but I'd fell better if MSI showed me they actively update their systems by releasing updated BIOS files from time to time.
I can't sell a 15000$ storage system that doesn't recognise the CPUs installed. The customer would laugh and tell me to come back with a supported system.
Isn't this a VERY valid reason for wanting updates? Even if it only is an updated CPU list?
The only reason I tried this MSI board is that it was the only one available with my retailer at the time I bought it with 3 PCI-X 100Mhz slots. Maybe I should go with a Tyan Thunder next time. Tyan at least show some activity.

Similar Messages

Possible Problem with Save for Web and Devices?

II've come here to the forum for some insight on why a gif file created by save for web and devices command is not showing up as an image in an uploading dialog box for my website. I'm buildiing my website with word press and a custom freelancer theme. I've created a customized header with Illustrator and have been saving the file with the save for web and devices command. Once I have my gif file, I go to my theme uploader and try to upload the gif image and place it on my homepage. I've not had any problems with doing this until yesterday, when I tried to upload an updated file. What usually happens is that the thumbnail image shows up in the dialog box, I select my options, and click insert. But what's started happening yesterday is that the thumbnail does not show up, unless I click on edit image. This makes no difference, as when I click insert and go to my homepage and refresh it, the header doesn't show up. I've tried working with the developer of the theme to resolve this problem and so far we've not found a solution. I've tried to upload the header with different file types: jpg, png, tiff, but they don't work. I thought I'd come here to see if anyone might have some suggestions. The problem may not be with Illustrator's save for web and devices, but I thought I'd give this forum a shot. Thanks for any and all respones. :[

CT,
If you can see and open the GIF/whatever (with any viewing application), the Illustrator Save for Web&Devices works. If not, you may ask about it in the Illustrator forum:
http://forums.adobe.com/community/illustrator/illustrator_general?view=discussions
If the image is there, to have the issue solved quickly, I believe you should ask in a forum covering the web building application.

K8D Master-F 9131 problem with BIOS 1.2 and Raidcore BC4852

The board does not start the Raidcore BIOS with motherboard 9131 BIOS 1.2 installed. It works OK wih BIOS 1.1.
Raidcore 4852 FW is V130. (tested V110 = same problem)
Bios found here:
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=441&kind=3
Both 1.1 and 1.2 BIOS was unable to recognise my Opteron 242 CPU steppings which indicate they are both quite old. Maybe MSI could fix these problems and include the newer CPU steppings like the ones for 250 CPUs. Bios 1.2 is dated nov. 28th 03 which is a year old. BUHU.
I am building a LARGE storage server based on this motherboard. Several others to come (planning on using the MSI K8D Master 3 -133 9161), but if MSI does not upgrade the BIOS for their high end boards I will start looking for another supplier real fast.
Sincerely
ArildS
Norwegian Central Securities Depository

I'll stick with the V1.10, but I'd fell better if MSI showed me they actively update their systems by releasing updated BIOS files from time to time.
I can't sell a 15000$ storage system that doesn't recognise the CPUs installed. The customer would laugh and tell me to come back with a supported system.
Isn't this a VERY valid reason for wanting updates? Even if it only is an updated CPU list?
The only reason I tried this MSI board is that it was the only one available with my retailer at the time I bought it with 3 PCI-X 100Mhz slots. Maybe I should go with a Tyan Thunder next time. Tyan at least show some activity.

Memory Problem With 4gb Crucial Ballistix and Asus M4A785TD-V EVO

motherBoard: ASUS M4A785TD-V EVO
bios Version :2005
Video: amd hd5750
Processor: AMD PHENON II X2 550 3.100MHZ
Memory: Crucial
Modele Memory: blt4g3d1608dt1tx0
Capacity: 4GB
greetings to all
i have asus m4a785td-v evo mobo. i ve bought 4 gb crucial ballistix ram today. it says on product its 1600 mhz and cl8 but it shows on my pc 1333 mhz and cl9. when i was searching for this problem i came across this topic: http://forum.crucial.com/t5/Crucial-Ballistix-gaming-memory/Memory-Probleme-With-8GO-Crucial-Ballistix-and-Asus-M4A785TD-V/td-p/9464 can i apply the same settings? how can i fix that? is it possible via bios settings? thx in advance and sry for my bad english. here is some screenshots:

I am not good at RAM setting but the 'Timings Table' shows there is XMP-1600 profile available so I believe it would be enough to turn on that memory profile in BIOS.

I'm having problems with CS2 (mainly illustrator and photoshop

I'm having problems with CS2 (mainly illustrator and photoshop ) randomly shutting down while trying to save a file. Reformatted my laptop for fear of a virus and reloaded... I have gotten nowhere.
Please Help!

CS3 still had issues with the preferences becoming corrupt, so a possible workaround would be to reset the preferences.
The file is called AIPrefs and is located under 'Documents and Settings/User/Application Data/Adobe/Adobe Illustrator CS3 Settings'. It is a hidden file. Delete it with Illustrator closed and when you launch the program again the file will be rebuilt.
May be it is also sounds like you need more memory for your computer. If you can navigate to your computer's memory controls, and allow your operating system to use a portion of your hard disk drive (HDD) as RAM (maybe 2Gb or so) it may solve your issue.
How is about: http://www.filerepairforum.com/forum/adobe/adobe-aa/illustrator/383-%E2%80%8Bcorrupted-fon ts-in-illustrator-file-urgent-help-need – resource has non-commercial specialty
Third party software Illustrator Repair Kit also must be good solution
It has free demo version at:- http://www.illustrator.repair/
Hope this will be helpful.

Any problems with Adobe CS5.5 and the Maverick system?

Has anyone had any problems with Adobe CS5.5 and the new Maverick OS? I don't want to install if there are issues. Thanks!

First thing I would suggest is to upgrade your server OS to a newer version if possible. Secondly try removing the apps out of the allowable apps list and instead change it so that you allow the apps that are within the specific application folder, ex: Applications/Adobe Photoshop CS5
I had similar problems with CS5 apps and by adding the apps by allowable folder instead it corrected my problem. Granted, if you have savvy users, there is the potential to open a can of worms here but it was the only way I could get it to work for "standard" non-admin user types.

I'm having problems with Adobe Illustrator , Photoshop and MediaEncoder !

I'm having problems with Adobe Illustrator , Photoshop and MediaEncoder !
The ilustrator when opening files from a lack of memory of which I own already find it hard 11Gbram , Photoshop crashes inesperdamente and the Media Encoder is not converting the video in nnehuma the options requested .
Would like guidance , never had such problems with Adobe software . Today got a MacPro 2x2,2.66 Ghz Dual Core Intel Xeon 11Gbram 240GB SSD .

Hi Mw,
Will it be possible for you to join the connect session: https://my.adobeconnect.com/rbhunwal
I want to have a look into this.
Thanks & Regards,
Raghuveer

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

HT3552 I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.

Have a look here > http://support.apple.com/kb/TS1646

Communication problem with Adobe 9.0 and HP Printer when I scan

I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.

Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
>

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

TS1646 hello I have problem with regist my visa and I cannot buy from store the message came in the end of form is says the phone number must be a 7-digit number and I have writed but not accepted iam from saudi arabia my mobile is 966504850992 pls answe

hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossary

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

Kt4v possible problem with bios 1.8 and hd

Similar Messages

Maybe you are looking for