KT4V POWERING DOWN AND BEEPING

Hello
Can anyone help me? i have just bought a MSI KT4V motherboard and installed it with a AMD ATHLON 1900+
My problem is when i come to boot it and load windows it kills the power to the board and makes a nee narr sound like a police car until i switch it off at the mains. I cant find out why its doing this and there seems to be no mention of reasons for this noise in the manual.
Please help.
KT4V motherboard
AMD ATHLON 1900+
Nivida Geforce 2 mx400 video card
fujitsu 40gb hdd
Thanks in advance
Rodney. :(

I checked my cpu fan and found it to be on the wrong way round. Now when i power on the D bracket shows 4 red leds and stops there.
Looks like i might have cooked my cpu.
Will this have done any more damage other than to the cpu? ?(
Rodney.

Similar Messages

Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, the icons don't wiggle anymore.

Since I updated my 4S iphone to the latest iOS7 version, I can no longer close any of my apps. As a result, all my apps remain open on my phone. Even powering down and restarting does not solve the problem. Specifically, when I double-click the start button, my open app icons display. But when I hold my finger on an icon, the apps do not wiggle and display an "x" to close. Any advice... thanks?!

Double tap the Home button, then swop upwards on the App Preview (not the App Icon). Tap the Home button again when done to return to normal screen.

I have an MX722, with error code 6000. Have powered down and unplugged. code won't clear. what now?

I have an MX722, with error code 6000. Have powered down and unplugged. code won't clear. what now?

Hi jactoday,
To try and resolve the issue, you will want to ensure that there are no obstructions in the printer that may be causing the error. To do this, please follow the steps located here. If you still receive the error, the printer will require servicing. Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

I have spotty signal at my home, so some functions don't work until I leave the house. I noticed on the main screen, it says I have 54 emails, but when I open the app, I only have 4. I powered down and back up. No fix. What gives?

Im having this same problem an my phone is about 3 weeks old. I am not sure about the voice over part though...I have not yet figured out how to work the voice recognition part of the phone...I am such a newbie with this phone. I did the power off/on suggestion, several times. I tried leaving it off for 10 minutes. Tried to reset with the power on/off and home button pressed at the same time. Charged battery. Still makes no difference. You cannot scroll any direction. Have to double click to open apps. Have to double click letters when texting or emailing in order to get the letter in the text box. Can scroll through app choices, have to click on the line with the dots in it and move from page to page. Can't access the settings - > general - > accessibility - because it won't allow me to scroll down to "general".
Anyone help you with your fix yet?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

My iphone sometimes rings and sometimes goes to VM. I have tried powering down and still having problem

My iphone sometimes rings and sometimes goes to VM. I have tried powering down and still having problem

solved phone in do not disturb mode

My phone keeps looping, powering up and powering down and continues the process. I do not want to restore my phone where it will cause my pictures and video to be lost.

First, a comment: this process ***** because I am typing my question in various screens for the fifth time.
QUESTION:
My phone keeps looping, powering up and powering down and continues the process. I do not want to restore my phone where it will cause my pictures and video to be lost.

Is your device jailbroken? Have you backed up your device recently?
Cheers,
GB

HP Officejet Pro 8500A fails to print until powered down and restarted.

This problem has arisen after about a year of giving good service. Although it says "Now Printing," it does not print until powered down or disconnected and restarted or reconnected for each print job. I will be most grateful for any suggestions for fixing this.

Hi @jmuravchik
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Also, running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

WRT150N MUST BE POWERED DOWN AND BACK UP!

Good day, I have a problem with my WRT150N in that each morning before I can access the router I must power it off and then power it back up. Until I power down/up the router, Windows and Linksys both show no network available. Not a matter of a network available and unable to connect, just no network available. It is a simple process but very annoying..once this is done the connection is good except for dropping the connection every so often but this is easily corrected by allowing windows to "Repair" the connection..and then it will work until the next dropped connection, which may be in 2 minuets or 2 hrs. This "Repair" works about 95% of the time and on the occasions that it does not work, I do have to power down and back up the WRT150N and it works fine. I have had the WRT150N for about 6 months and have had this problem for a couple of months now. I use the WPC300N adapter with XP. The dropped connection is just the wireless connection as the wired connection will work when the wireless does not. I have not updated the firmware to the router as it is version 1.1. Thanks for any help.

Good day Wizzard,
The uninstall and reinstall did not work..if fact it disabled the router and put me back to doing a complete uninstall of everything..all the software, reset the router, only then would it work but with the same problem..I have been in live chat with three different techs and they all have a different solution...one thinks my adaptor might be at fault..don't buy that, one suggested I upgrade my firmware but when I log on to check for updates it tells me I have the latest verison..1.01.9, the version listed on the Linksys site for latest version for the WRT150N and the other one didn't seem to have a clue before we got cut off...so, I am back to where I was..able to access the net and can do so with no problem...it's just that I have to do a power down and power up before I can log on to the router...I use Windows for my connection..I don't know why the uninstall and the reinstall did what it did but I do not want to go through that again..If you have any other ideas I would appreciated it..Thanks and have a great day!

I am getting that stupid sandbox environment message. I already powered down and that has not helped. Please help

I uploaded to iOS 7 and now I cannot purchase anything - it gives me the message that this is not a test user and go to sandbox environment and change password - huh? Please help - I tried to power down and that didn't work

This sounds like a message to a developer. Did you by any chance have iOS7 BETA installed before?

Ipad suddeny powers down and it restarts

Hello,
I just received my new Ipad yesterday afternoon. I proceed to setup the device. I follow the instuctions to connect to Itunes. Everything goes well. I setup the ipad as a new device and avoid using my iphone and ipod profiles. Hey great
Insidiously, the ipad will shut down afer 5 minutes during use and restart. I mean blank screen for a short pause then the appearence of the white apple logo. There is ample battery charge. It continues to cycle like this after I manually shut down and restart. Okay, I restore on 2 different computers, it still does the same actions. While itis working,the ipad is excellent. It is frustrating to be reading my email or a document and the device just stops. Now, I am ready to package the item and ship it back.
Just curious has anybody experienced this issue and do you have any advice.
Thank you for listeneing
Message was edited by: rccola66

Hi, I have the same problem with my IPad. I have had it for almost a month and was really enjoying it when my problem developed. When I first turn in on, it seems to work for about 3 to 5 minutes when it will then seem to shut down and do a reboot on its self (black screen for a few, then apple icon, then shows the normal screen with the slide on). It will work again until 3 to 5 minutes have past and will again shut down and reboot. After troubleshooting it, restoring it to factory settings I got a hold of the Ipad Support people, went through the hoops in verifying the problem before I sent it to an Ipad Repair facility. It was serviced at the Ipad service center in Elk Gropve, CA. The service center returned it with a letter saying that it could not duplicate the problem. The problem reared itself again the first time I tried to use it with the same symptoms. Since there are no Apple Stores or service centers in my area, I took it to an authorized Mac computer repair/service in my area. They also experienced the same symptoms with my IPad. The were surprized that Ipad Service Center in Elk Grove couldn't duplicate them. Before leaving the Mac service store I talked to a rep via the IPad support center line. I went through the restore procedures, and attempted to download the latest software for the Ipad. It was a real pain as it would continually shut down and reboot during the download and install procedures every 3 to 5 minutes. I again ship the IPad to be repaired/replaced to the IPad service center in Elk Grove. I got an email today stating the service center could not duplicate the problem and my Ipad was useable and functional and was being sent back with the latest software and firmware updates. I hate to be pestimistic, but how do you think my Ipad will work when I try using it again? I hope this is not the norm for Ipad and its Service/Repair Centers...

Xpeiria 4.3 update powers down and restarts phone constantly

Ever since the 4.3 update my Xperia T constantly shuts down and restarts. I've tried changing the power settings, charging it etc but makes no difference. It also drains the battery and makes the phone feel hot. Any advice? It's driving me mad!

I am sorry,you should take it into service for further help,it could be SIM related:
http://www.sonymobile.com/global-en/support/contact-us/
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

I am not receiving new email alerts on iphone 4s. I have powered down and also deleted the email account and reset all notification. I have to manually fetch all emails

Please help with new emails. I am not receiving new email notification. I have to manually fetch all emails. I have contacted Apple several times. I have powered device all the way down, reset me.com. My me.com account works great on Mac. Please help

So all email notifications were not coming thru...from any source. Talked to another Apple text and he advised me to shut down the multitask bar at the bottom. So far so good. Seems kind of strange because the problem had only started about a month ago. I've had the phone since August

Missing files after powering down and back up

I turned off my new Air for the first time in weeks. When I powered back up I was and am missing alot of open office documents and pictures I had downloaded and saved. Please help these aren't files I can lose.

Voice command or Voice over? Two different things. Voice command can not be disabled, Voice over can.
Have you tried a restore from backup or as new?

Just powered down and moved my iMac and when powered back up all it says is no bootable disc-please insert disc and hit any key......what do I do?

when starting up my iMac (had just moved it from one room to another, was working fine) it only shows on the screen "no bootable disc...please insert disc and hit any key".....what do I do?

That sounds like a message from a DOS-based computer. A Mac would just show a folder with a question mark, unless they've changed things recently. Do you have a BootCamp partition?
Try holding down the option key immediately after the Chime. You should go into the startup manager and it will show all bootable drives. Pick yours, then go into System Preferences and set your startup disk.
Next would be to try a Safe Boot by holding down the shift key right after the chime until you see the gray screen. It will take a while to boot up as it is running some disk checks.

KT4V POWERING DOWN AND BEEPING

Similar Messages

Maybe you are looking for