KT6-Delta FISR questions

I have finally put together my pc and I want to ask a few questions.
The Latest BIOS update says it will update the SATA rom to version 2.31.
My first question is, will it make the SATA performance faster?
My Second question: the manual says the FISR comes with a gigabit LAN but yet all the drivers I have tried can only do 10/100. Why is that?
  My KT6-delta has not crashed since it has been working and I am very pleased with MSI, the board layout is very good and I like all the BIOS options.

Quote
Originally posted by Sharp
I have finally put together my pc and I want to ask a few questions.
The Latest BIOS update says it will update the SATA rom to version 2.31.
My first question is, will it make the SATA performance faster?
My Second question: the manual says the FISR comes with a gigabit LAN but yet all the drivers I have tried can only do 10/100. Why is that?
  My KT6-delta has not crashed since it has been working and I am very pleased with MSI, the board layout is very good and I like all the BIOS options.
1 question....I tried latest bios and it made my SATA raid array slower....however the cpu idle function does work.
2.Gigabit lan connection is only good if computer you are linked to has same. (better for small lan)

Similar Messages

  • KT6 delta Fisr overclocking settings?help!!

    hi, my rig is a Athlon xp 2600+, msi kt6 delta fisr, 512 ddr 400 mhz kingston value ram and aopen fx 5600 xt 256 mb... my question is how can i reach 200 mhz fsb? how can i fully take advantage of my 400 hz memory? what settings do you recommend?how much raise the vcore and fsb together?,btw i can't touch the multiplier because it's locked. resuming, i want to reach 200 mhz fsb and be stable at the same time. thanx for everythng....bye!!please help!!!
    :i'm getting a volcano 12 XT tomorrow...

    Quote
    don't really need more power, the only thing I want, is USB2.0, Firewire400, optical audio output, onboard Raid and some more oc features
    Well, you'll like the KT6 Delta FIS2R for sure.
    Of all the mobo's ive studied, none have as many USB2 inputs on the back of the board where all the other ports are. This has 6 ready for direct use without any pci slot blocking dongles. (8 with the USB2/Diagnostic lights dongle installed).
    It sure has optical output, but the sound quality from it isnt as good as an Audigy.
    The promise controller is very good, letting you use 2 PATA and 2 SATA at the same time.
    Firewire use a pci slot blocking dongle but has 3 sockets (2 big and 1 small)
    As for OC, ive tried above 200mhz FSB (208 Mhz) but it was a little unstable, not sure why, never really tested it out.

  • KT6 Delta FISR & AMD 2500+

    I have new MB KT6 Delta FISR and CPU Athlon 2500+ (1833 MHz) and I have problem.
    The combination is working nice. But in BIOS I can see FSB=100 only.
    And CPU is by Sandra identified as Athlon 1800+ Barton/Thorton on 1100 MHz.
    THe BIOS high power is FSB=133 and notice get damage warning.
    Then Sandra shows CPU 1900+ on 1435 MHz. I left it 133 and CPU temperature is about 62 deg.C.
    Because I didn't check the CPU identification I am afraid to increase FSB to 166MHz.
    The RAM Kingston 333 MHz is working on 200 MHz by SAndra.
    The second question is the temperature of MB. Sandra warns that 52 deg.C is too high. The VIA chip has no cooler even if on the picture in MSI pages there is one. But it is the picture of the FISR2 I think.
    Thank you for your advice.  
    Joe.

    I would recommend using CPUZ to identify the processor. Sandra (and most programs) will recognize the processor as 1800+ because it is operating at 1100 mhz (100FSB). When you increase the FSB to 166 you will see that your processor will be identified as a 2500+. IMPORTANT: When you increase the FSB to 166, leave the multiplier at AUTO.
    Another thing...I don't know if the processor operates at 85ºC but my 2500+ Barton operates when idle at 46ºC. You mentioned that when you increased the FSB to 133 you got a temperature of 62ºC. I think that is a little on the high side. Is your heatsink installed properly? Do you have good airflow inside the case?

  • No DVD Sound - KT6 Delta FISR

    Hello,
    I'm in trouble with my motherboard KT6 Delta FISR : drivers are installed, configured, everything is ok, music is working, video CD also, but no sound if I try to run a DVD !?!? No mean to get sound on the analog output. Tried everything but cannot find the solution.
    I think it could be a problem with sound output, for example sound only going on the digital output SPDIF and not on the anallog, but I need help to change that !
    Can anyone help me please ?
    Thanks a lot
    Chris

    Hi,
    Yes I'm quite sure, it's not the first time I configure an MSI motherboard, settings are tu rear output, and configured for stereo speakers. Music, wav, VCD is working, only DVD has no sound. Is there a special setting, hided somewhere, that would be something like "disable analog output if digital sound present" ?
    Thanks
    Chris

  • Northbridge cooling on KT6 Delta-FISR

    KT6 delta FISR's have no active cooling, just a passive heatsink.
    how much is this going to affect my overclocking of the FSB? its at 182mhz right now, aint tried more but if i DID stick on a fan would this help the case? and roughly by what mhz?
    Also, since there is nothing to control the pci and agp busses, if i reached 200FSB, would this be really bad for the pci and agp bus? if not too bad, how bad on a scale of 1 to 10? and what's at risk? (or am i missing some options in the bios?)
    Spec:
    kt6 delta fisr
    xp2500+ with thermaltake extreme volcano 12
    corsair xms pc3500 cas2 512mb platinum ram (2-3-6-3-1T)
    audigy 2
    leadtek gfti4200 overclocked to just under a ti4600
    80gb HD and 160gb HD, optical drives, floppy, antec truepower 480w psu,
    5 system fans (2 front, 2 back, 1 side)
    temps at current settings 182FSB 11x mult. 49 idle cpu, 54 load cpu, and between 41 and 43 idle AND load case.
    thanks people

    I cannot go beyond 166fsb. If I do video starts to flicker, sound gets crackly, system runs louder. Temp
      1)lowest 40c after a 30 minute rest.
      2)max 49c , warning threshold at 60c.
      3)Sys temp 31c
    Current fsb: 160, Fan on chipset (nb).
    Enermax eg301p-ve
    +5V 30A
    +12V 17A
    +3.3V 32A
    Kingston KVR400X64C25/512 (512mb DDR400 CL2.5).
    KT6 Delta ms-6590 ver 2.
    Xp 2500 barton core fsb@333mhz.
    MSI 5700 ultra
    Creative sb 5.1 Gamers.
    Win98 OEM.
    Everything works, every game, all programs, no over heating,very quiet other than the freq'es and that was reduced by corecell. these setting I get best performance.

  • KT6 Delta FISR + BIOS 5.6 + SATA

    Beware of this combination - I had problem to pass booting of PC   I had to downgrade to BIOS 5.5 again and everything is all right now...
    AthlonXP 3200+, KT6 Delta-FISR, 256MB RAM, HD Seagate  ST380013 AS etc.

    Hello,
    Would MSI bring out a BIOS with defects?
    Its possible but they do test every BIOS carefully.
    When you flashed your KT6, did you reconfigure all your settings?
    enable PATA, SATA, boot from hard drive?
    memory settings, CPU settings?

  • MSI KT6 Delta FISR KT600 Wont Start Up

    Hi All I Have a MSI KT6 Delta FISR Motherboard With a AMD Athlon XP 2400+ 2.00GHZ In My Spare Pc and It Was Working Fine Last Week But When i Turned It On I Seen That My hard Drives Were Not Detected In The Bios Under Standard CMOS Settings So I Saved My Bios and Turned Off The Pc To Sort The Drives and When I went To Turn It Back On It Wouldnt Boot Back Up
    So I Tried Unplugging The Hard Drives Again and Still No Boot Tried My 1gb Ram From My Main pc and Still No Boot So I Setup The D-Bracket To See If That Could Find My Problem and It Says That My CPU Was Damaged or Not Installed Properly So i Took It Out and Put My AMD Barton 2500+ In and My 480watt Hiper PSU and It Said That CPU Was Damaged or Not Installed Properly So I Tried My 2400+ In My Other Motherboard What Is a MSI K7N2 Delta ILSR nForce 2 Ultra 400 and It Worked Fine Both CPU's Did.
    System Specs Of Spare Pc.
    AMD Athlon XP 2400+
    400watt PSU
    512mb ddr 333
    ATI Radeon 9600Pro
    All Help Will Be Apreciated Cheers.

    Hi, I received the same message from the D-bracket, so mine wont boot never, If you get how it works from yours please explain what you did here, in order to get my board alive. Sorry, but I tried everything in the book with this mobo and nothing worked (KT6-LSR non delta version), and I feel that I can't help you out so much.

  • The strangest thing on a KT6 DELTA-FISR

    Hi
    I have a wierd problem with the onboard SATA Raid controller, when i press the and enter the SATA setup menu i cant select anything from the menu. It doesent respond to the up and down arrowkeys (as i should). The only function i can do is ESC and then Y / N .
    And i cant install Windows before the disk is initialized in the SATA setup utility. But how can i do it when i doesent work?
    I have disabled almost all of the mainboard functions(Sound, Com and LPT ports, LAN) thinking it might me a resource conflict but the result is the same...
    I have eaven tryed a different keyboard(Yeah i know that was stupid  ) but i had to try. ..
    I have no' idea on what to try next so i am hoping some of you have an idea?  
    My settup is:
    KT6 DELTA-FISR mainboard
    512 TwinMOS PC3200
    200GB Western Digital Special edition (SATA)
    ATI Xpert@play 8MB PCI
    Chieftech 340W PowerSupply

    When the installation prosess of Windows XP start i hit F6 and install the SATA and PATA drivers. But when i am suppose to select the harddrive and partition it Windows finds the drive but says something about "Windows cant access the drive" or something like that.
    On my other PC i have an adaptec SATA controller and there i had to initialize the before using it(only 1 SATA drive connected). Are you shure i dont have to initialize the drive before installing?
    Thx for your quick reply!

  • KT6 Delta FISR gaming crashes

    I have been having problems for a few weeks now, with random unexplainable crashes whilst gaming, sometimes the PC just drops back to windows XP, other times the whole machine just resets and reloads and tells me that windows has recovered from a serious error (send, don't send error report) caused by a device driver, still other times I get a BSOD with varying messages:PFN_LIST CORRUPT, IRQL_LESS NOT EQUAL, and then there is the scrambled unreadable BSOD accompanied by a loud sound from the speakers followed by reset and error report.
    I must stress that this problem only occurs when gaming, Sim City 4 being its favourite victim, all other processes are unaffected, I can edit photos, surf and do all office work type apps.
    I have tried reinstalling windows XP several times using various methods described in other threads but to no avail
    All hardware in this machine worked perfectly in this combination on my Abit AT7 MAX2 mobo
    AMD Athlon XP2800+
    CoolerMaster Aero V HSF
    MSI KT6 Delta FISR mobo
    1gb Corsair XMS3200ll in 2 512mb sticks
    Sapphire Atlantis Ultimate 9700 pro 128mb
    Creative Audigy 2 s/card
    2 * Seagate Barracuda SATA V 120gb hard drives in RAID 0 array
    Conexant AccessRunner DSL modem
    350w Aopen silent psu  12v 16.0a all other ampeges above spec for CPU
    Any assistance would be greatly appreciated

    o_0Received a new KT6 Delta at begining of Jan, everything was working fine, but lately the thing seems to be exhibiting exactly the same behaviour as the last one (as well as having the cold reboot thing).  These symptoms seem to be getting worse as time goes on, this is really unusual, normally if you have a hardware prob it doesn't come on over time, does it?
    This is really annoying all of my hardware ran fine when I put it back on my Abit AT7Max2, I did about 75 hours of gaming, and not a crash in sight.
    Has anyone got any more insights into this problem
    I am running with AGP fastwrites on, but with the AGP write option disabled in smartgart

  • KT6 Delta-FISR V2 fresh WinXP installation hang

    Hola
    I have recently bought a KT6-Delta FISR MoBo with a Athlon XP 2400+ and have encountered some problems.
    After the MoBo finally managed to recognize the HDD and CD-ROM i have tried to install WinXP Pro. After boting from CD-ROM the inspection of the hardware setup takes forever and when initializing windows setup it runs sloooooooow before the system hangs when loading the initial system files. (like kernel debugger etc.).
    When monitoring the temperatures in BIOS I get the impression that everythings nice and cool.
    The system recognizes my CPU as 1800+ and the DRAM at 266MHz.
    The PATA-IDE controller is enabled and the ATA-IDE disabled. (not using neither SATA nor RAID) i have tried to fiddle with the FSB and DRAM freq's but it crashed my system. Any suggestions to why my system wont get past Windows initial installation? To weak power? BIOS/hardware error/misconfig?
    By the way, what is Broadcom NetXtreme Ethernet Boot Agent? Something which can/shoud be disabled?
    Hail Santa!
    Specs:
    KT6-Delta FISR version 2
    AMD Athlon XP 2400+ (266MHz)
    60GB Maxtor DiamondMax 16
    AOpen FSP300-60PN Power 300W
    GlacialTech Igloo Silent Breeze 462 II CPU fan (using the thermal conductor applied from manufacturer)
    TwinMOS PC3200 512MB DDR-DIMM x 1
    MSI GeForce FX5200 128MB DDR
    40/12/48 TDK Velocd Rewriter CD-ROM
    unknown floppy (working)
    PS/2 Mouse & Keyboard

    Quote
    Originally posted by Wizardman
    did you say you werent using sata
    then why is your pata disabled as you need it for your hdd to read and write
    enable it and see what happens
    It says PATA enabled, SATA disabled.  
    By the way, everything is up and running.
    The problem turned out to be the TDK CD-ROM which wouldn't read the WinXP CD.
    Switched to my Plextor and "voila" I'm in business  
    The AOpen power works just fine and gives plenty of juice.
    Now the FSB runs at 133Mhz and the system shows my Athlon XP 2400+ processor correct.
    Happy new year every body

  • MSI KT6 Delta-FISR - D-Link diags "Boot attempt" failing

    Hi,
    I need some inspiration for this problem.
    My sister's machine has been running fine (ish) for about 5 months. The sound has been "playing up" recently, sounding like it's stuttering. Anyway, that's not why I'm here.
    At the moment, the machine won't boot up at all. I had it booted up today, and it was working OK, then it froze (sister complained that it froze yesterday as well).
    On reboot, all I'm getting is the Xtreme main screen, then nothing else. The D-Link diags are showing 1 RED, 2,3,4 green which is
    "Boot Attempt- This will set low stack and boot via INT 19h". It does nothing else.
    I can't get into the BIOS, not can I boot from floppy. Doesn't matter if the HD is connected or not, it still fails at the same point.
    I've stripped the machine back to the basics, so only have 1 CD-ROM, 1 HD, 1 stick of ram, floppy drive, graphics card.
    I've swapped the graphics card .. same problem.
    dropped the ram from 2 to 1 stick and switched sockets ... same problem
    Swapped the PSU .... same problem
    Is the Motherboard knackered ?  Anyone got any more suggestions ??????
    Thanks.
    Ailsa
    MSI KT6 Delta-FISR
    AMD Athlon XP 3000+ *333 FSB
    40gig IBM IDE drive
    350W power
      +12V 17A
      +5v 33A
      +33v 28A
      -5V 0.5a
      -12v 0.5a
      +5v/SB 1.5A

    ailsa, try removing the heatsink and cleaning any accumulated dust and dirt. make sure the fan is spinning. then clean off the old thermal pad or paste, and apply a fresh thin layer to surface of CPU die (the metal bit in the middle)
    EDIT: fredrik, i see you edited your post as i was typing mine! 

  • KT6 Delta FISR no lan at startup

    System
    Mb      KT6 Delta FISR Bios Ver Ami 5.4
    Pro      AMD Athlon/Barton 2800
    Cooler      Coolmaster Aero 7+
    Fans      3No.
    Mem      Corsair 2X512Mb
    Vid      MSI FX5600 TD 265
    HD      2 x 160G Maxtor Dmax+9 SATA150/7200
    DVD      LG 8160B
    DVDrw                   Pioneer 106D
    Power      Enermax EG651AX-VH 550W 3.3v/36A  5V/36A                   12v1/14A  12V2/16A 12V3/ 16A 12V4/14A
    OP Sys      Win xp Pro SP1
    On startup the broadcom 5788 Lan fails to start and neither does it appear in the Device manager under windows. The Bios has been updated and the Lan switched on in the bios. I need some ideas as to how toover come/ resolve this.

    I only have the LSR - but have you loaded the Broadcom drivers on the cd?
    Where did you get bios 5.4 from - MSI German site ??

  • Gaps while playing AC3 Sound through SPDIF on KT6-Delta FISR

    Hi everybody,
    I'm one of those lucky guys with a KT6-Delta FISR Board :D equipped with the C-Media 9739A OnBoard Soundchip and a S-Bracket from my old K7T266 Pro2 ( MS-6380 ) mainboard.
    It works great. The only problem is, when I try to play
    AC3-encoded Sound directly through SPDIF there are irregular gaps ( length = about half a second ) where no signal reaches my hifi system. Playing normal PCM-encoded Sound works fine, just AC3 is the problem.
    I have the latest driver, the latest bios, the latest chipset driver from via & the latest Windows XP Prof. updates.  :]
    I also tried different AC3 Filters ( from WinFast DVD, PowerDVD and the free ac3filter ) and a fresh WinXP Prof. installation. But nothing worked.
    Always these stupid gaps.  ;(
    The mysterious thing is: With my old MB and an extra pci soundcard with C-Media CMI8378 Chipset and optical SPDIF it works great.
    Yeah, I know I could use the old one, but the KT6 OnBoard chip has some benefits  :]
    Some information about my system:
    - Athlon XP1800@1800(133x11,5) ( Palomino Core )
    - Cooling: Copper Silent 2 TC by Arctic Cooling
    - Enermax power supply ( +3,3V/35A, +5V/44A, +12V/15A)
    - NVidia GeForce TI4600 from Leadtek ( i forgot: latest driver   )
    - Western Digital WD1200JB HDD (120GB,7200 RPM,8MB Cache )
    - RAM: 256 MB PC2100, CL2 by Apacer
    - Home-theatre system: Sony STR-KSL5 ( dts,dolby digital/pro logic II, digital cinema sound, 2x optical digital input, 1x coaxial digital input )
    - Connection between PC and hifi system: optical
    Has anyone the same problem or maybe a solution or a suggestion ? Would be nice then, when he or she posts it here  )

    A little mistake: The S-Bracket is from the KT4 Ultra FISR - Board ( MS-6590 ), sorry for that      
    @osnavi:
    I don't know whether it's okay or not. I just thought, the S-Bracket is just a cable extension of the onboard pin-connector ( means: there are no necessary parts in it - except the current-optical coverter for optical out - and the whole functionality is on the board ).
    Have you any idea, whether there's another S-Bracket for the KT6 series ?
    @maesus:
    I've tested all latest available drivers ( both from www.cmedia.com.tw  and from MSI via LiveUpdate3 ). All of them produced this gap.
    Both drivers where tested with Coax out and Optical out.
    I also tried to increase the PCI Latency in BIOS to give the sound chip more time for using the bus and therefore more time to transfer data. It didn't work, too.
    I will now try the following:
    - decreasing the FSB to 100 MHz ( just an idea  , maybe it helps )
    - installing a generic ac'97 audio driver (in case something like this exists )
    - well, bang my head on my hifi system
    Any suggestions are still welcomed  )

  • KT6 Delta FISR/FIS2R Query

    Hi All,
    My friend is just about to upgrade his mobo (due to failure of last one).
    Wanted Ultra Raid etc so was keen to get the KT6 Delta FIS2R.
    For some reason we cannot get a KT6 Delta FIS2R in UK - only have listings for FISR model.
    But there are two discrete verions of the FISR board to choose from :
    MS-6590-12S http://www.ebuyer.com/customer/products/index.html?rb=6441865042&action=c2hvd19wcm9kdWN0X3NwZWNpZmljYXRpb25z&product_uid=51280
    MS-6590-090 http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=73814
    Can anybody tell me if one of these id the FIS2R board ? (as that designation does not seem to exist in UK for KT6)
    Else can anybody tell me if any difference to these two boards ?
    Was the Promise Sata Raid controller the only update to the FIS2R over the FISR ?
    Thanks in advance,
    Delugecomet.

    Hello,
    Ebuyer have made a mistake, you need to email them and ask them what the difference is.
    The KT880 is a better chipset.
    http://www.ebuyer.com/customer/products/index.html?rb=6451475456&action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=86710
    But some people experience problems such as slow screen refresh, video lag.
    Yes the only difference between the FISR and FIS2R is the Promise sata controller.
    Both boards cannot do IDE RAID.
    If you do not need the FIREWIRE feature you could go for the Delta-LSR
    http://www.ebuyer.com/customer/products/index.html?rb=6451685476&action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=86233
    You may also want to look at the KT6V
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=511
    It is the same as the kt6 Delta but there is only 2 dimm slots and the Audio is better than the KT6 delta but not the Kt880.
    The nForce 2 board is the best one. K7N2-Delta ILSR.
    http://www.ebuyer.com/customer/products/index.html?rb=6451735015&action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=47974
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=436

  • KT6 Delta-FIS2R Question

    I was thinking of purchasing the KT6 Delta-FIS2R and wanted to know if the thermaltake silent boost heatsink/fan would fit on the motherboard.
    I am asking because i noticed that the mobo has a nortbridge cooling fan and I am not sure if my HHUUUGGGEE silent boost will have enough room?  

    the only way I can buy the board is over the internet so that is not an option.  Anyone know if the thermaltake silent boost will fit on the KT6 Delta-FIS2R??

Maybe you are looking for