KT6 Delta: Post your overclocking stats here ;)

Im still in the process of waiting for my frikn hardware to arrive from the damn shops
But now i have to resort back to the KT6 FIS2R coz a64's are to pricey.
Anyhow, anyone OC'd a 2400+ to some high FSB & Core speeds?
Im aiming at 2.3Ghz@200FSB or more if lucky!!

look at my signature it's not a 2400+ but a barton 2500+

Similar Messages

Kt600 delta post your gripes here!

Major gripes with this board :-
1.why should i have to spend another £50 - £80 on a top of the range psu
just to run a £55 motherboard ?
The amount of people on this forum who have had to upgrade their psu just
to get this board up and running is unbelievable
2. heat :- this board runs a good 10 - 15 degrees higher than its nforce 2
counterparts ! so you have to go out and buy uprated cooling to
get a stable system
never mind trying to clock it
kt6 chipset :-this is the most unstable board i have ever fitted costing more in the long run to get it all up and running than any other ive built
shall stick to the nf2 in future
feel free to post your moans

1: The heat on the cpu, increased ALOT from my old KT400, very strange. It vas before, 39-40 (Idle) now its 45-46, much more I think, maybe there is something wrong with the sensor, or the KT400 had a 'good n' sweet days' sensor.
Well, that would be everything I think.
I ran my XP2500+ at 3200+ yesterday, and it was very stable, but I had to increase my TwinMOS PC2700 memory to 3v to have them in 400 mode. And even then I had to remove Ultra mode and everything else fast, that made the computer slower, atlest in 3dmark, then default clock on everything So I will just get better mem and then I will go 3200+ everyday, I hope, if there wont be a problem with the heat.
Using a open window, and a Cooler Master Aero 7 LITE at 45% speed, I suppose I can increase the speed if I want to clock but Its very loud then. I think, as I said that there might be some error with the sensor, cause the window was open, and the computer was just under it and totaly open, no plates or sidepanels or something, also it was -3C outside (sweden). The old motherboard (K4v) got much colder.
EDIT: I have a Q-TEC 550W (you say they suck, not mine ) and I still got very good voltage even when Im in so extreme overclock (to me that is extreme )

Post your photo's here

post your photo's of your ipod with cases on or any other picture you like.

Why don't you?

Post your favorite Widgets here

Please post the widgets you like to use. I underrated how nice these web applications are and would love to know what you use that I may be missing out on.
Find free wifi hotspots http://iphone.jiwire.com
Dopper Radar Option http://apple.accuweather.com/widget/iphone1/iphone.html
Nice IM app http://iphone.beejive.com

Why don't you?

Post Your HDTV display CONFIGURATION HERE.

In order to help others, can those who have full (or close) resolution of your HDTV post your display configuration here?
Please include your television model, OSX version, and list of an additional software/hardware used to get things working.
Thanks.

Toshiba 37WL58, Mac mini 1.5GHz Intel Core Solo, DisplayConfigX (registered), connected with the DVI to VGA adapter.
Verified DisplayConfigX settings:
Monitor Tab:
Refresh: 49.00 - 105.00
Horizontal Frequency: 12.00 - 85.00
Pixel Frequency: 350.00
Aspect Ratio: 4:3
Default Refresh Rate: 60
Resolution Tab:
Horizontal - Vertical
Active Pixel: 1360 - 768
The others are preset, but should read:
Front Porch: 64 - 1
Sync: 144 - 3
Back Porch: 208 - 23
Total: 1776 - 795
The refresh rate should default to 60.003
Afterwards, choose the Widescreen option on the remote.
(Thanks to Andyb2 over at AVForums.com and Mark Parsons1 at Apple Discussions)
Mac mini 1.5GHz Intel Core Solo Mac OS X (10.4.7)

Overclocking Issue on KT600 (KT6 Delta) - Info Please

Did anyone here that using KT6 Delta or any of Via chipset could raise the FSB above 200 for a long term?
my friend said that because I have a Via KT600 Chipset, I cant make my 2500+ Barton to 11x220 (because the Multiplier is locked), and if I do that, I will have to RMA my board.
I have a KT6 Delta SR, and I have raised my FSB to 200 for atleast for 2 days, and today I set them to default (11x166) because I want to do the Vcore trick.
Please anyone here that has the experience reply this post. thank you.

Quote
Originally posted by DuCeYaJ
been running this for almost a week. no problems yet. i'll try to get it as close to 466 as i can this weekend.
how hot is your system?

What memory are you running in your KT6 Delta?

I am looking at upgrading my memory. I am going for 1GB of pc3200 with decent latency. Please post your memory configuration as i want to know what works with the KT6 Delta before making a purchase
I also wonder if i can use dual-channel memory even thought the board doesnt support it. So i wont need to upgrade my memory when i get a new dual-channel board.
I would like to stay under/around $200

HyperX as per sig.
Don't understand your question "can I use dual channel memory even though the board doesn't support it." Makes no sense. Since the board doesn't support it the answer is surely no.
BUT, if you mean "can I use 2 sticks which I'd normally buy for dual channel memory" then the answer is definitely yes. There's nothing special about dual channel memory kits - they are just matched pairs, that's all. The Delta series has 3 DIMM slots so go ahead and buy 2 sticks.
Apologies if I've got the wrong end of the stick!

Post Your's 3DMark 2k1 scores HERE

I would like to verify my 3DMark 2001 SE (v.330). Post your's results with complete system description (drivers versions, ram timings, overclock settings (if any), ect.)
Here is my Baby:
- Athlon 3200 (2210 MHz - NC core, no OC)
- MSI K8N NEO Platinum (1.4 bios)
- 2x 512Mb PC3200 Kingston ValueRam (KVR400X64C2.5/512) at 2.5-3-8-3-1T (stock speeds)
- MSI 6800GT (stock speed)
- WD Caviar 80GB SATA 8Mb cache
- Tagan Tg-480 (480W)
- SB Audigy 2 ZS
- Other standar stuff
My 3D 2k1 score: 21435 (with above system&settings, all stock)
Run at:
- Win XP + SP2
- Dx: 9.0c
- ForceWare: 66.70
NOW YOUR'S RESULTS...

Here is mine using the system in my sig.........
3dmark01 score.....24,552
http://service.futuremark.com/compare?2k1=8165419
DX9c
66.81 nvidia drivers
XP Pro with SP2

Post Your's 3DMark 2001 scores HERE

I would like to verify my 3DMark 2001 SE (v.330). Post your's results with complete system description (drivers versions, ram timings, overclock settings (if any), ect.)
Here is my Baby:
- Athlon 3200 (2210 MHz - NC core, no OC)
- MSI K8N NEO Platinum (1.4 bios)
- 2x 512Mb PC3200 Kingston ValueRam (KVR400X64C2.5/512) at 2.5-3-8-3-1T (stock speeds)
- MSI 6800GT (stock speed)
- WD Caviar 80GB SATA 8Mb cache
- Tagan Tg-480 (480W)
- SB Audigy 2 ZS
- Other standar stuff
My 3D 2k1 score: 21435 (with above system&settings, all stock)
Run at:
- Win XP + SP2
- Dx: 9.0c
- ForceWare: 66.70
NOW YOUR'S RESULTS...

MSI K8N Neo Platinum (1.5b2 beta BIOS)
Athlon 64 3000+ @ 2.4GHz (10 x 240)
Radeon 9800 Pro @ 450/375
2x512MB Crucial PC3200 @ 240MHz @ 3-3-3-8 1T
Catalyst 4.9
Score: 23,077
URL: http://service.futuremark.com/compare?2k1=8134558

New MSI KT6 Delta - No Post

Hey everyone.....
I don't know if you guys remember but my last posts were largely about how much I hate computers....well the feeling is getting stronger.
I just got a new used MSI KT6 Delta mb and I hooked everything up but when I turn it on it just starts the fans and nothing else.
I can test the cpu and psu pretty easy 2marrow....but Im pretty sure this mb is good...unless the guy lied, and the reason I got this one is cause my last computer(old mb) would just sit at 39 minutes once it reached the graphical part of the xp install (and Im definite the cd was perfect)...so I'd assume everything else was working except my old mb......so......was I wrong...could have been something else
could it be something else this time?
I've reset the bios (which are supposely updated), I've tried my other graphics card and I'm out of ideas....
Im in a rush but I wanted to get some ideas asap.
I figure it can't be any other hardware besides my mb or gc but incase
I've got in it now - 128mb of generic PC2100
1800 XP Athlon
and my ti4400
nothing else....I also just got some cheap powersupply so maybe its causing the problems but I don't have any money....
Thanks for the help
Edit/Delete Message

Good search !
jonwon29: "...Send it back dont even spend anymore time or money messing..." But you spend your time posting against KT6 Mobo, and you can see that you are wrong.

P7n platinum - e8400 overclocking issues, pls post your settings

Dear OC experts,
I have troubles overclocking e8400 to 3.6 ghz on p7n platinum board. I have tried many variables and options in BIOS, but the problem remains the same. While doing regular tasks on my PC, everything seems to be stable, but when I start a game (battlefield 2 bad company or skyrim) the PC freezes. I have upgraded BIOS to the latest version, I have all the newest drivers, tried many different settings in the OS, but it does not help. The video card is gtx560. There are no problems/freezing when I set all the values in the cell section in bios back to default.
I have searched web alot, my eyes are red... The only remaining hope - you : )
I would greatly appreciate your help. Could you please post your bios settings for the OC'ed e8400 if you have the same board.
My systems is:
E8400, 4GB 800mhz 6400 RAM
3 HDD (total 1TB)
GTX560 1GB
Win7 64bit
PSU CORSAIR Enthusiast Series 650W ATX12V / EPS12V SLI Ready
Thank you very much in advance.
irsi

You may want to read this useful guide.
http://www.xtremesystems.org/forums/showthread.php?178286-Official-MSI-P7N-Diamond-(780i)-Discussion-Review-Overclock-Guide-BIOS-Thread
Yes I know its the Diamond board, but the OC basics are the same and all the BIOS options are probably pretty similar.
See if that helps you for now.
You will find the latest BIOS versions here http://www.msi.com/product/mb/P7N-SLI-Platinum---P7N-Zilent.html#/?div=BIOS Please use the Forum flasher if you ever intend to flash the BIOS. >>Use the MSI HQ Forum USB flasher<<

[POST problem] kt6 delta sr + athlon 2800+

configuration:
-athlon 2800+
-kt6 delta sr and 2 x 512mega ddr 400mhz banks
-ati radeon 9700 pro (AIW shappire)
-PSU 400w (and the amperage meet the requirements)
what i did already:
-The system doesn't post even if i clear the cmos.
-The 12v cpu connector is inserted.
-Trying everykind of permutation memory banks, memory slots, with 1 or 2 memory banks.
-changing my mobo with another kt6 delta sr
-changing my cpu with another athlon2800+
-changing my new ati radeon with my old video card (gforce2mx)
-powering on while hd/floppy/cd has connected/disconnected (every kind of permutation you can imagine)
- powering on while singing "row hide"
The best results i got:
-I was able to start the computer and just enter in the bios settings 4 times in 100 efforts.
-In the bios i was able to check the cpu temperature wich is stable on 39-42 degree after 40 minuts.
-In the bios i configured the value as suggested in this forum
-Anyway i put fsb to 166 and i tried to set cpu ratio both to auto or to 12.5/13
Question:
anybody know if this mainboard has any jumper that force cpu ratio or fsb frequency or any other stuff? The manual doens't mention any of that kind of jumpers... but... i don't know whatever more i can consider to solve this mistery.
Anybody can help me?
-zenner

Quote
Originally posted by Fredrik Åsenius
Is the CPU really seated correctly? Was it a boxec AMD? If so, you shouldn't put thermal paste on the heat spreading pad which is already on the heat sink.
I guess the case connectors is placed correctly?
Could your PSU be erraneous?
When possible, enter BIOS and select default parameters, I'd suggest. If you can get your configuration working just a little it is often easier to trouble shoot.
Thank you for replying.
I think the cpu is seated correctly... i really don't know how to seat it uncorrectly
It wouldn't fit the cpu slot.
I don't know if it is a boxed AMD (how to check it) anyway i'm not using thermal past but just the heat pad.
The PSU is erraneous? Do you mean a faulty PSU or a miss placed power cable?
Anyway the PSU ha 5 days of life as i bought it for the new computer... i and asked "a psu that can manage an athlon 2800+ 2HD, 2CD and an ATI RADEON".
Looking at the paper on the PSU BOX, it should meet the amperage requirement for my situation.
I tried the bios default settings already: it doens't work
I also tried to manually configure the right setting: it doesn't work.

Oracle Config Tools DBCA DBUA NETCA NETMGR -Post your issues here

Hi
This thread is created to collect user experience with Oracle Config tools
DBCA DBUA NETCA NETMGR
You can post your questions,issues and if you come across any bugs you can post here .
This will be taken into consideration and the fix / solution will be given ASAP .
Looking forward for your responses .
Thanks
Kantha

Hi,
I have a Sun SPARC box . There are 7 instances 2 in 9.2.0.8 and 5 in 10.2.0.1 upgraded earlier than my joining. I want to upgrade one of the 9.2.0.8 databases.
The database to upgarde is up and running and can be connected through listener.
I login as the owner of ora10g and start dbua. It shows me all the 7 databases but when I select the database to upgrade it throws the following info :
[b]The Upgrade Assistant Failed in bringing up the database xxxx. Oracle Home /oracle/9.2.0.8 obtained from /etc/oratab was used to connect to the database. Either the database is not running from Oracle Home /oracle/9.2.0.8 or correct Initialization pfile was not found.
It then asks for pfile. -----------------------------------
The database is up and running.The Oracle home is also correct in Oratab file.
I checked the sqls.log file
It has info like
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
set sqlprompt 'SQL>';
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
connect /****** as SYSDBA
select count(*) from v$instance;
set heading off
set pagesize 0
set feedback off
set linesize 2048
set sqlprompt 'SQL_ENGINE_END_OF_SQL'
show sqlprompt
set sqlprompt 'SQL>'
Please help on this issue . Y cant the DBUA see that database is up?

Post your questions about #BlackBerry10 here!

Hey everyone,
What a week last week! I think I'm finally starting to settle down after all the excitement with our global launch events last week.
If you're getting a BlackBerry 10 device soon, take a look at these tips on the BlackBerry Help Blog to help you set up your email, contacts, calendar and social networks: http://helpblog.blackberry.com/2013/01/blackberry-10-add-email-contacts/
Have other questions about BlackBerry 10? Our community can answer pretty much anything, just post your question below!
Remember, if you have a BlackBerry 10 device and need support, check out the BlackBerry 10 Support boards on the main page of the community.
^Bo
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Likes for those who have helped you.Click Accept as Solution for posts that have solved your issue(s)!

sanjithb wrote:
Why is the bis being stopped and not unlimited in south africa. Especially on the Z10.
the BIS is not stopped. BIS is still required for OS7 and previous.
the Z10 does not need a specific BIS plan, which is generally considered a very good improvement.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

KT6 delta Fisr overclocking settings?help!!

hi, my rig is a Athlon xp 2600+, msi kt6 delta fisr, 512 ddr 400 mhz kingston value ram and aopen fx 5600 xt 256 mb... my question is how can i reach 200 mhz fsb? how can i fully take advantage of my 400 hz memory? what settings do you recommend?how much raise the vcore and fsb together?,btw i can't touch the multiplier because it's locked. resuming, i want to reach 200 mhz fsb and be stable at the same time. thanx for everythng....bye!!please help!!!
:i'm getting a volcano 12 XT tomorrow...

Quote
don't really need more power, the only thing I want, is USB2.0, Firewire400, optical audio output, onboard Raid and some more oc features
Well, you'll like the KT6 Delta FIS2R for sure.
Of all the mobo's ive studied, none have as many USB2 inputs on the back of the board where all the other ports are. This has 6 ready for direct use without any pci slot blocking dongles. (8 with the USB2/Diagnostic lights dongle installed).
It sure has optical output, but the sound quality from it isnt as good as an Audigy.
The promise controller is very good, letting you use 2 PATA and 2 SATA at the same time.
Firewire use a pci slot blocking dongle but has 3 sockets (2 big and 1 small)
As for OC, ive tried above 200mhz FSB (208 Mhz) but it was a little unstable, not sure why, never really tested it out.

KT6 Delta: Post your overclocking stats here ;)

Similar Messages

Maybe you are looking for