KT6 Delta - Power off right after turning it on

Hi. I just installed my KT6 Delta and when I turn on the machine, it comes on for a few seconds but then turns back off by itself. I then have to unplug my power supply for about 5 seconds then plug it back in again before I can turn the machine on again.
On the D-Bracket, right before it turns off, it is at the state where all lights are red except the top right one, indicating something to do with the memory.
I know for a fact every component works perfectly because I am using them all right now on a different motherboard to write this.
Since I need to unplug my power supply before I can turn the computer on again, it seems as though something is shorting out maybe?
Anyone know what this could be?

The heatsink is a Thermalright SK7 and the fan is a Panaflo 80cm. The PSU is an Enermax 435W. 768 mb PC2100 memory. The other motherboard I have is an ASUS A7V8X. Like I said, everything was working perfectly in the ASUS. I got the KT6 Delta, moved everything over to it, turned it on and it would shut back off right away. So I moved everything back to the ASUS and it worked fine....for a little while. All of a sudden my computer rebooted and now it's been doing the same thing as the KT6 ever since.
I'm thinking of going out and buying a cheap Duron to test if it's the cpu. Is this a good idea do you think?

Similar Messages

Why would my i phone 5 power off and not turn back on

why would my ipone 5 power off and not turn
back on

thats a bad case most iPhone 5 have this issue the power button is a glitch thats why they stopped selling it.
If you would like better performance use assistive touch on the settings.

My Ipod touch screen won't stay on. Right after turning the Ipod on it goes fuzzy even after a full charge. Is this due to battery problems?

My Ipod touch screen won't stay on. Right after turning the ipod on, the screen goes fuzzy.
Is this is sign the battery is a problem? Clicking sounds are also not working despite being tunred on, as well as the speaker.
L

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

KT6 Delta bootup stall or monitor turn off

Hi
I recently upgraded my motherboard to a KT6 Delta and I have expreienced some boot up problems.
The PC can boot up normally and just before the windows xp flash screen appears the green LED on my monitor will turn orange..as if on standby, the pc is still operating as the fans can be heard. I then need to press the reset button and the pc will then reboot.
The reboot is sometimes quick, however, at other times this reboot often pauses at the "Via Technologie ATA Raid Bios SettingUtility v1.10...Scan Devices, Please wait......" message for about a minute and it will then procede to boot into XP perfectly fine.
I do not have any serial HD's connected.
Any points or ideas here would be useful.
Thanks.

KT6 Delta (MS-6590) with drivers from the cd included with the MB..today I checked with MSI live update and downloaded and installed the most recent via drivers.
Bios is American Megatrends Inc...version07.00T..build date is 04/02/01.
ATI Radeo 9600 (not Pro) with XP 2600.
I have already done a clean install bu the situation is the same. I have no stability problems when XP does boot up....
The switching off of the signal to the monitor on each and every single initial boot up is what I am having difficulty getting my head round, specially as it will consistantly boot on the second reboot

MSI KT6-DELTA power Goes up but nothing happen after ...

I have An Msi KT6-DELTA board with an Athlon XP 2000+ processor , SAMSUMG 512 MB DDR 400 , GeForce 3 64 MB DDR , 300 Watt power supply + Volcano 9 fan .
The power light goes on when I start the comp and fans are starting but nothing else happen nothing on screen ;( . I check the D-Bracket to know what was the trouble by the four light on it , All light are RED saying that the processor is damaged or not installed properly . I try 3 processor on it , all processor was Ok so what's going on?
Are you thinking that my board is damaged? ?(

Hi,
I am running an KT600 LSR and I am having the same troubles. I push the button to start the computer and the fans come on.Nothing else happens until I press the reset button, then it starts normally. However it does search for a raid device every time it boots, None are connected so is there a way to make it stop searching? It sometimes hangs on that screen for 10 to 15 seconds.
Thanks,
Tj
My system is
XP 2200
Kt 600 LSR main board
512 mb pc 2100
wd 100 gb (boot drive)
maxtor 120 gb
lite on 52x12x52
dvd drive
sound blaster audigy gamer
ati 9000 pro 128 mb ddr

Why does my iPod touch turn off right after I slide to unlock?

I have a third generation iPod touch that used to work just fine. However, it won't turn on unless charging and as soon as I slide to unlock it, the slide to power off option turns on. Despite cancelling it, it automatically turns off. It's very frustrating and I've tried restoring it, but to no avail. The problem continues.
Any suggestions as to how to get it up and functioning properly again?

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Phone with busted screen turns on right after turn...

Hello everyone,
Thought i'd register to lay out a problem i have with my N95 phone. First of all, great phone, ive been using it for years and it still competes with everything out there for me. It did break down occasionally, but nothing i couldn't fix by cleaning the contacts or whatever, i always found a way to get it going again.
Last month somewhere i went for a run, but on my way there the derailleur of my bike (gear shifter thing) snapped off, my wheel locked up, i came tumbling off and i had to fish my beloved N95 out of my pocket in two bits, the screen and the main body. After carrying my bike home i ordered a new flex cable, a new screen and a new body for my N95, build it in with no problem at all (done it 3 times before) and popped in the battery to have a go. That's when it got interesting.
The phone turned on (giving the customary bleep), the keys lit up (although one keyboard led seemed to have broken) but the screen wouldn't turn on. Oh well i thought, let me just buy another screen since this one is obviously DOA. But with the second screen it still wouldn't work, and what are the odds of receiving two DOA parts from different stores? Not very likely.
I started looking for cases similar to mine and i came across tons of topics, they all pointed in the same general direction, format the phone using either the 3 * green button method or calling to #7370# and so on. Would be fine solutions if my screen worked, but since it didn't i was in for a blast. I tried the 3 button method and it seemed to be doing something, but since i couldn't see anything it was a little tricky to tell, but anyway i just assumed it did something. I left for a few days (i'm not one for half measures) hooked to the power and just let it format, or i thought so because i couldn't actually see anything happening because the screen wouldn't come on. After seeing nothing change i just turned it off. But it wouldn't turn off, because immediately after it gave a bleep and turned back on again. When i try to shut it down it happens again, comes back on. Only way to kill the power is to take out the battery, but when i pop the battery back in the same thing happens, the phone turning on after turning it off.
So to recap: phone busted, new flexcable, new screen and new body, after reassembling screen not working and after a seemingly botched attempt at formatting it won't turn off normally, instead it turns back on with the screen still not working.
The obvious question here is: what is going on and what can i do to get it going again? Either by formatting the thing and hopefully fixing corrupt video drivers and get the screen going again or some other solution i haven't thought of yet. Any suggestion would be greatly appreciated, as i said i think its a fantastic phone. Now im using my old 1100 which is of course a poor substitute to an N95, even if its more functional in terms of being able to use it to hammer concrete nails into walls :-) And i know what your thinking: just drop it in the bin and buy a new one. But i'd rather fix it, i always try to fix broken appliances, phones and computers and it has probably saved me thousands of euros. So again: any help is greatly appreciated!
Moderator's Note: We have removed mention of unofficial parts which may void warranty of other users.

Hi miintz,
You phone will need repair. Please contact a Nokia Care point in your country so they can take a look at your phone and help. You can find Care point locations globally from www.nokia.com/repair or your local Nokia website -> Support.
Also note that as your warranty may be void, a charge may be in place to get it fixed. Let us know how you get on.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Mac Mini shutting off soon after turning power on

Hi,
My Mac Mini was working fine last night, then when I tried to turn it on this morning, the fan was making a lot more noise than it usually does, and the LED light was flashing bright every second or so. The Mini booted up into the login screen, then suddenly turned off as I tried to sign in. I have restarted the PMU, and tried to run the install disk but the computer shuts off on me before it has a chance to load it. It seems that if I put the computer to sleep at the login screen, I am able to log in and see my desktop before the Mini shuts down again.
Can anybody help me?

It sounds like your logic board may need to be replaced if the PMU reset doesn't work. Some component is probably overheating or changing value causing it to shut down.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

My Macbook pro keeps shutting down right after I log in. The power cord seems to be fine, so I think the computer has enough power. Right after logging in, it shows a grey background with a loading bar that loads only 1/4. Then it shuts down.

I have had my Macbook Pro since 2011 and it has been great until now. Suddenly, I can no longer get past the grey screen just after I log in. The grey screen appears with a loading bar, and the bar get 1/4 of the way complete, then the computer shuts off. My power cord seems to be working fine because this problem still occurred after using another power cord (from another Macbook). Keyboard does not light up, and the small green lights on the left side of the computer do not light up (this is an older version and these light indicate how charged the computer is). It is using the OS X Yosemite and recently had total clearing of the hard drive as it was transferring from one owner to another, so the hard drive isn't nearly full enough to be causing this problem. I've never run into this problem before with other Macbooks.
Help!

Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column two drives plus possibly a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install. http://support.apple.com/kb/PH18869?viewlocale=en_US

KT6 Delta won't boot after clearing the BIOS

I have just put together the machine as per my signature and run into a few problems. The XP 2800 mobile is not recognised as such but as a XP1800 when I set the FSB to 133. Am I right in saying this CPU should run at 1.65 volts as it seems to wants to run at 1.75. I changed the V Core to 1.65 and it boots ok but when I tried it at 1.6 it did not want to boot, ie no video output. I no longer get the single BIOS bleep and the monitor stays on standby. This has happened before and I got it running again by clearing the CMOS and reseating the RAM but this time I have done the same and it won't boot. Is there anything else I should be doing please. Many thanks.
Having looked at the Socket A sticky I see that my diagnostic D bracket is showing 1,2 and 3 showing red and four not on at all which would seem to point at the graphics as being the problem.

Hello!
Voltages should be set to "CPU default" or similar. Your processor comes in different versions, try setting to 166 instead of 133. Always when changing processor one should clear CMOS, by powering off, unplugging power cable, and then move JBAT jumper for a short time, a minute or so.

How can I turn off mail after turning on my mac??

Hi! I made an upgrade my mac to 10.7.1 and at start up, mail is automatically turning on. I was trying to unmark function "Open at login" but after restarting my computer it is still marked. Can somebody tell me how to set mail to not turning on all the time when I'm turing on my mac?

Managing Mac OS X Lion's application resume feature

Safari Freezes after turning Privaate Browsing off

When I go to settings and turn my private browsing off, most the time I go back to Safari and it freezes or crashes. This happens 95% of the time. How can I fix this? Is this a known bug?

Try terminating and restarting Safari:
1. Press the Home button
2. Double click the Home button to bring up the "Recent Apps" tray.
3. Touch and hold on the Safari icon in the "Recent Apps" tray until a "-" appears.
4. Touch the "-" to terminate Safari.
5. Restart Safari and see if the problem is solved.
If that does not work try restarting and resetting your iPad.
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

My iPhone 5 continues to power off and on every 10 seconds

My iPhone 5 continues to power off and on every 10 seconds. It'll turn on, the apple icon appears, it then goes to my lock screen pretty quickly, then shuts off and does it all over again. How can I fix this? If I have backed up my phone to iCloud will I lose things like my notes and pictures?

Hey kenziephipps,
To make sure we are on the same page, you cannot keep your phone powered on as it turns off right after you see the slide to unlock screen after booting up. I would advise to try to restore your iPhone by following the steps in the article below. To answer your second questions, you should have it all backed up in iCloud like you said you did unless you made changes to what is backed up. With that if you did not make any changes you will have it backed up.
If you can't update or restore your iPhone, iPad, or iPod touch
https://support.apple.com/en-us/HT201263
Take care,
-Norm G.

How can I reboot my Ipad when I do not have access to the power off screen?

My device slide off my couch while in its cover. IT was working afterwards, for about 5 min. I sat it down while I took something out of the oven and was back maybe 5min. or so later. When i try to access it, all I see is a black screen. I cannot unlock it or even power off. How can I reboot it without the power off swipe ?

Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reboot/Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory

Mac Pro early 2008 power off suddenly alone and gives a long beep on startup

Hello everyone! Can you resolve the problem reported? I have 6 equipaments identical to those with the same problem, some worse than others, and only two barely functioning, others are stopped. They power normally and suddenly alone they power off , and after that I only can power on again , after hours waiting or only the next day , and when it's power on , on startup , they give me a long beep , before the chime , then I can work for a time (minutes or long time , it's not secure)
I talked with Apple Computer (from USA) and they do not assume that the problem exists and that many users have the same problem, worldwide.
If you're not satisfied with the result of Apple, we will have to press them to assume the defect and promote a recall on these equipments. We have many users with the same issue (MacPro off alone)

All places where I have my equipments (they are in 4 different places, but I have tested them in all four locations), are electrically grounded, the electrical networkstabilized, reviewed annually and I use UPS minimum of 1.5 KVA (I have two UPS of 3.75 KVA) . I tested with the original HDD , with all the applications that I use installed , only with the system installed and the same procedure on a new HDD and got the same result . So , it is not eletrical problem . I have iMacs , MacBooks , G5 and MacPro early 2009 working in the same places with no problems . I tested all the sites with three different electricians and all
approved my Electric networks . As I know, all Apple equipment have
surge protection, precisely to prevent thecomponents from being damaged
by electrical problems. Again , it is not eletrical problem .

KT6 Delta - Power off right after turning it on

Similar Messages

Maybe you are looking for