KT6V series bios version 2.0 released

MSI has posted bios version 2.0 for the KT6V series (not KT6-V) and can be downloaded here.
Update description:-
-Support Barton CPU 3000+ & 3200+
-Support Sempron CPU 3000+
-Update VIA RAID BIOS to ver. 4.31

Thanks for your advise. Many people will make use of it.

Similar Messages

KT6V series bios v 1.9 released

MSI has posted bios version 1.9 for the KT6V series.
Update description:-
-Support Sempron CPU.
-Fix RTC function cannot work properly under Windows 98/Me.
-Fix LEXMARK P707 printer cannot work in Windows with BIOS legacy enabled.

Thanks for your advise. Many people will make use of it.

KT880 Delta series bios v 1.8 released

MSI has posted bios version 1.8 for the KT880 Delta series.
Update description:-
-Support low speed CPU fan.
-Update VIA Raid firmware.

Pushed a copy to the bios area.

KT3 Ultra (2) Bios version 5.7 released

MSI has now released bios version 5.7 for the KT3 Ultra (ARU) and KT3 Ultra2. Fixes posted are:-
Support AMD Barton XP3000+ (FSB333) CPU (For KT3 Ultra2 only)
Add CPU Halt Command Detection in the Bios Setup
Fixed ATI 8500 AGP Card cannot be used
The new bios can be downloaded here:-
KT3 Ultra (ARU)
Link
KT3 Ultra2
Link

Juras. This thread may help answer your question Link

[Z77IA-E53] UEFI Bios Version [E7733IMS.Axx Releases]

E7733IMS.A20 ==> E7733IMS.A31
01.Update CRB base 024 follow 7751 H74 BIOS
02.Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown
03.Patch NV Quadro NVS450 card S3 fail
This is a beta bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!

E7733IMS.A41 ==> E7733IMS.A43 BETA BIOS
VGA BIOS : 2137
ME Version : 8.1.40.1416 Updated with this bios.
RAID ROM : RST_11.5.0.1207
LAN OptionRom : 2.41
Device OptionRom : N/A
01. Update Fixbootorder module to support AMI BCP tool.
Update CRB base follow 7751 HA1 BIOS
01. Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000019).
&Update CPU Microcode for Sandy Bridge Q-0 and D-2(M12206A7_00000029).
02. Add solution to fix System hang up "A2" with some hard disk.
03. Adjust Fast Boot PS2 Devices Support disable function incorrect solution.
04. Remove Switch to PLL mode for clock buffer solution.
05. Patch Fast Boot PS2 Devices Support disable function incorrect.
06. Update ME 8.1.40.1416.
07. Modify the PCH Sata Aggressive LPM Support item default value.
08. Switch to PLL mode for clock buffer.
09. Fix can't detect LSI 9270-8i RAID card.
10. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
but the option has display garbled.
11. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
12. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
13. Fix clear cmos after boot option priorities show error issue.
14. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
15. Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
to patch some NV's graphics card capability issue.
16. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
17. Fix some monitor hang B2 issue.
18. Change French language error in the option "Load Overclocking Profile x".
19. Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
20. Update SMBIOS module ver 34.
21. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
22. Replace SATA port automatically shut down when in WIN8 64 bit OS the shutdown.
23. Fix WIN7 64 Bit UEFI OS S4 resume fail issue.
24. Fix post process, the phenomenon of the dialog box will appear
if you press F12 Key some cases there will be the phenomenon of the crash.
25. Fix select BIOS Setup Discard Changes and Exit item after can't enter os issue.
26. Fix F12 Snapshot function error issue when post press F12 and Del key.
27. Patch NV Quadro NVS450 card S3 fail.
28. Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
"Secondary Plane Turbo Power Limit" range to 4096.
29. Fix it will show error characters in Boot device priority after disable some boot options.
This is a beta bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!
[/quote]

[Z77MA-G45] Bios Versions [E7759IMS.1xx Releases]

E7759IMS.180 ==> E7769IMS.190Official
   Add som spi rom support.
   Fix quit without saving will reset when connect a uefi os.
   Fix VGA N650-1GB5(V280-05S & V280-10S) hang issue.
   Replace SATA port automatically shutdown when in WIN8 64 bit OS the shutdown.
   Add UpdateBiosAndME function error message issue.
   Update FixedBootOrder13 module.
   Fix the FixedBootOrder function error issue.
   Add solution to support OA30tool changing OEMID & OEMTBLID.
   Fix NTFS HDD with the customized OS,the system will hang A3.
   Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000017).
   Fix set virtu technology to D-mode && OC CPU Ratio will cause 3 times full reset.
   Update UpdateBiosAndME function error message solution.
   Fix can't adjust boot device priority by Int15 tool when update Fixed Boot Order ver:013.
   Update ME 8.1.30.1350.
   Fix transparnt string background function which applied in progress bar.
   Adjust the UpdateBiosAndME function error message string.
   Patch Fast Boot "SATA Device Support" disable function fail.
   Update CRB024.
   Fix post process, the phenomenon of the dialog box will appear
if you press F12 Key some cases there will be the phenomenon of the crash.
   Patch NV Quadro NVS450 card S3 fail.
   Fix Samsung Non-XMP memory can't OC more than 1866 with IVB CPU.
   Fixed setup item is disappear issue when restore defaults for MahoBay
platform (Update FixedBootOrder 13).
   Fix F12 Snapshot function error issue when post press F12 and Del key.
   Fix GSE II setup menu three mode function error issue when load default
under mainpage group.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
>>MSI Downloads<<
Please note that flashing this release occurs entirely at your own risk!

E7759IMS.1A0 ==> E7759IMS.1B1Official
   01.Fix MFlash failed issue when connecting 4 SATA HDD.
   02.Fix 3.3VSB power lost issue(G3-S0).
   03.Fix the issue that the system will hang 0xB4 or 0x99 when use customer usb cable
or usb cardreaders.(USB cardreader: KAMA reader Tr, Akasa card reader)
   04.Update ME8.1.50.1456.
05.Update audio table
   06.Patch system can't boot issue when use CMY8GX3M2A2133C11R & CMZ8GX3M2A2133C11R and memory frequency >=1866.
07.Change win8 logo
08.Update GOP solution
09.Add RestoreSpecialBootOptions module.
   10.Fix when plug 2 different dram,can't adjust Dram ratio, CPU IO Volt & Sa Volt.
   11.Patch system can't boot issue when use CMY8GX3M2A2133C11 & CMZ8GX3M2A2133C11
& CMZ8GX3M2A2133C11B and memory frequency >=1866.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
>>MSI Downloads<<
Please note that flashing this release occurs entirely at your own risk!

[B87M-E45] UEFI Bios Versions [E7817IMS.Axx Releases]

E7817IMS.A10 [MP Bios Release]
VGA BIOS : 2177
GOP       : 5.0.1035
ME Version    : 9.0.20.1447
RAID ROM    : 12.0.0.1783
LAN OptionRom : 2.53 (UEFI v2.021)
Device OptionRom : N/A
Release MP Bios
This is a full release bios. It's use is done solely at your risk! Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Once the flash is complete, you must download and install the latest ME drivers.

E7817IMS.A20 ===> E7817IMS.A31
VGA BIOS : 2177
GOP       : 5.0.1035
ME Version    : 9.0.21.1462
RAID ROM    : 12.0.0.1783
LAN OptionRom : 2.53 (UEFI v2.021)
Device OptionRom : N/A
     01. Update code base to 4.6.5.4_VEB_1AQQW032a
   02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m162
     & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m165
a. Remove 4 DIMM Memory Presets option when model is 2 DIMM design.
b. Add more Memory Presets option.
c. Grayout DRAM Training item when user password installed.
d. Fix system hang on 0x55 issue when use G.SKILL F3-2800C12Q-32GTXDG(12-14-14-35) memory and XMP is enabled.
e. Modify DRAM frequency above 2000MHz and tCL is 7 patch solution.
f. Patch MUSHKIN 991768 memory RST jump error for 7866.
g. Patch ADATA AD3U1600W4G11-B memory RST jump error.
h. Patch SWISSBIT MGU02G64E1BA2EP-BBR memory can't boot into OS issue.
i. Fix system hang on 0xFF problem when system boot with some BCLK setting and issue the warm reset.
j. Modify some coding syntax avoid compile fail.
03. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m074
& GSESetup module to SharkBaySetup_m021
& MSI GSEII Common Private module to MSI_GSEII_Common_Private_m013
& MSI GSEII SharkBay Private module to MSI_GSEII_SharkBay_Private_m015
a. Fix setup item (IEEE1394 and USB30) can be select when user password.
b. Update to support CRB 4.6.5.4_VEB_1AQQW032.
04. Update OSSelect module to OSSelect_m020
a. Base on CRB32 to update SecurityBootFlavor version 22 to file for Windows 8 Configuration item.
05. Update MSI Multi Language module to MSI_Multi_Language_m008
a. Add SecureBootMode.uni string for CRB32.
06. Update uP1811 module to uP1811_m111
a. Modify VR 12VIN OCP Expander item help string for SharkBay platform.
07. Patch SATA driver detection issue and add item to control.
08. Support USB Device resume from S4/S5
09. Modify some item string for BIOS SPEC V8.16
    10. Fix hardware monitor system fan1 speed.
   11. Modify DMI type 3 manufacturer and version.
   12. Fix CSM bom DMI type 2 product name.
This is a full release bios. It's use is done solely at your risk! Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Once the flash is complete, you must download and install the latest ME drivers.

Update for bios version 52kt30AUS - Lenovo Ideacentre K-210

Is there an update for this bios.

jbegnaud0163 wrote:
link is no longer valid
Try this link.......
https://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/idea...
*** The message thread you replied to is an old discussion. My link to the BIOS update is for a newer BIOS version that was released after this discussion started.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

KT6 Delta series bios v5.7 released

MSI has posted bios version 5.7 for the KT6 Delta series.
Update description:-
-Support Sempron 3000+ CPU

Hello,
The MSI Mercenary: BIOS updates add support for the new processors.
As with most bios updates, the new one includes all the old updates too.
The BIOS supports all of these CPU's + the semprons mentioned in the update.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=474&kind=1

K8T Neo2 Series bios v3.2 released

MSI has posted bios version 3.2 for the K8T Neo2 series of boards.
Update description:-
-Support USB devices under DOS mode.
-Update CPU Microcode (3000+, 3200+, 3500+)
-BIOS reported incorrect CPU temperature.

Hi
Had opposite prob.
ATI radeon is iffy, so I was configing it, there are 2 settings in AGP 66 and 75 MHZ, mine works on 66 by ' default', but if I try 75Mhz, its a reset cmos jumper job. I assumed the monitor driver is at 66Mhz, and that was the root of problem, as Monitor runs on 4 rigs, have not bothered altering display settings.
cheers
jocko

K7N2 Delta bios versions 5.4 & 7.4 released

MSI has now released bios version 5.4 for the K7N2 Delta-L and 7.4 for the K7N2 Delta-ILSR and can be downloaded here:- Link
This bios fixes the following problems of the previous version:-
-Fixed Nvidia FX5900 Ultra compatability issue.

I was using my K7N2 Delta nicely but after flashing the BIOS from 5.0 to 5.3 in LiveUpdate3 (all OK) and then when LiveUpdate ask to reboot... GOOD BYE!
When bootin the D-lights show that I have a processor damaged or not intalled properly (two red light up, and two green down...).
My processor is an Old Tbird 1.2 Ghz with 100FSB.
The question is: Why the mother stops recognicing the processor if before flashing BIOS worked nicely?.
J10 and J11 jumpers:
When I opened case to check out, I had the green J10 and J11 jumpers closed in the mother. The J10 was in safe mode, and the J11 jumper was closed...(133FSB-166FSB??).
I only have another athlon 1.1 ghz FSB100 processor to test the mobo, but I don´t want to take the risk of burn that one two (if is that the problem, of course).
So... I want to know how can I reflash the bios back (I have the old BIOS in a backup floppy disk, of course)... or if anyone else have the same problem as me....
Thanx a lot guys, and please help me... I´m very sad by now... because I don´t know how to get my computer to work.
Jose.
(from Argentina)

K7N2 Delta bios versions 5.3 & 7.3 released

Bios version 5.3 for the K7N2 Delta-L and 7.3 for the K7N2 Delta-ILSR have been released and are available via Live Update only at present.
Fixes posted are:-
-Modify CPU temperature detect
-Fixed Nvidia FX5800 and FX5900 compatability issue
I have downloaded 7.3 for my K7N2 Delta-ILSR and CPU temps are higher than before as expected. So far no problems.

I was using my K7N2 Delta nicely but after flashing the BIOS from 5.0 to 5.3 in LiveUpdate3 (all OK) and then when LiveUpdate ask to reboot... GOOD BYE!
When bootin the D-lights show that I have a processor damaged or not intalled properly (two red light up, and two green down...).
My processor is an Old Tbird 1.2 Ghz with 100FSB.
The question is: Why the mother stops recognicing the processor if before flashing BIOS worked nicely?.
J10 and J11 jumpers:
When I opened case to check out, I had the green J10 and J11 jumpers closed in the mother. The J10 was in safe mode, and the J11 jumper was closed...(133FSB-166FSB??).
I only have another athlon 1.1 ghz FSB100 processor to test the mobo, but I don´t want to take the risk of burn that one two (if is that the problem, of course).
So... I want to know how can I reflash the bios back (I have the old BIOS in a backup floppy disk, of course)... or if anyone else have the same problem as me....
Thanx a lot guys, and please help me... I´m very sad by now... because I don´t know how to get my computer to work.
Jose.
(from Argentina)

KT6V Series & Graphic Problems

Hi
I have a KT6V Series Via KT600 Chipset Socket A MSI Board
XP2000 Athlon, 512MB DDR Ram, Geforce 5500oc AGP 256MB Graphics Card
Windows XP.
Every so often the computer reboots itself and the Microsoft mesage says Device Failure on the graphics card, the card is new only got about a month ago. I tried the new Nvidia Drivers.
It starts freezing for a few minutes in game (Everquest for example), then eventually reboots itself.
BUT an interested thing is, in Nvidia properties thou the card is in the AGP slot it says BUS; PCI x0, is this something thats wrong?
What settings should i have in BIOS? Perhaps i got those wrong.
thanks
Shirl

Hello,
The BUS: should say AGP 8x.
Are you using any VIA 4in1 drivers?
In the BIOS goto advanced chipset features > AGP settings
Set the AGP to 8x.
Save and exit.
Go in windows, unistall the nvidia drivers.
restart, press F8 boot into VGA mode.
run Detonator destroyer (to remove all traces of your nvidia drivers)
http://downloads.guru3d.com/download.php?det=202
install the VIA 4in1 drivers,
http://www.viaarena.com/downloads/drivers/4in1/via_hyperion%204%20in%201_v453v.zip
restart the PC.
install the nvidia drivers, (get version 66.81)
http://download.guru3d.com/detonator/
restart, does that help?
No then it could be something else, how good is your power supply?

P45 Platinum [MS-7512 PCB 1.x]: BETA & Performance BIOS Versions

I will upload the latest Performance BIOS I could get my hand on. Unfortunately, I cannot provide changelogs at this point.
The BIOS is labeled A7512IMS.P0D and will appear as v25.0b13 on the POST Screen and in BIOS Setup. The BIOS was released on June 13th 2008.
I have just flashed it on a P45 Platinum Board that I have here for testing and found that memory compatibility has somewhat improved.
For those that are considering to give this BIOS a try: remember, the risk is yours and yours alone!
The archive contains the a flashing utility an can be used with the MSIHQ Forum USB Flashin tool (Method I):
>>Use the MSI HQ Forum USB flasher<<
/EDIT: I added the latest BETA-BIOS of the official BIOS series: A7512IMS.115. It was released on June 13th as well. Again, use this BIOS at your own risk and don't complain if anything goes wrong.

Quote
If the only versions that work with certain hardware combinations that are claimed to be compatible are Beta or Performance Versions then they should be available for public use
Every official BIOS-Version is based on the preceding BETA-BIOS-Versions. The Final A7512IMS.110-Release will be based on the preceding A7512IMS.11x-BETAs. Sometimes, BETA-BIOS-Versions that have proven themselves are renamed and released as an official version. So the changes will be made public at some point. I uploaded the non-official versions precisely because they may be of help to others even though they are not available on official MSI Download Sites.
Quote
I feel like a child who has been chastised for daring to question the standard "because I said so"
I opened this thread to share (not necessarely stable) BETA-BIOS-Releases with users that are willing to test not officially released BIOS Versions and are aware of the risks involved. Feedback (positive & negative) on system behaviour is welcome and in the best interest of everyone who has this board. The intention behind this is to offer alternatives to help users that have problems with official versions and to collect experience based information.
I did not open this thread to discuss MSI's BIOS Release Policies (nobody here has any true influence on it and I am aware that it does not meet the wishes and expectations of every user) and I did not start this topic to talk about the experience different users have had with MSI Technical Support. If you want to discuss these questions, open your own topic and if you have concrete suggestions that concern MSI policies and procedures, direct them to MSI directly (nobody here works for MSI).
This said, I invite you to share your own experiences with specific BIOS Versions in this thread to provide information that may be helpful to other users.
Quote
except in this case it is the child doing the chastising!
If you want to insult me because you feel personally offended by the way I am trying to point out that I do not want to let this thread about specific BIOS Versions for the P45 Platinum mainboard be turned into a general discussion of what MSI should do to enhance individual customer satisfaction, please do that via PM and I will gladly respond.
Now, back to topic: I will post future Performance & BETA BIOS releases as soon as I get my hands on them. So far, vP0D & v1.1b5 are the latest versions I had access to and I have no idea when there be further updates and at what point a final and official version can be expected.

Z87-G45 BIOS version 1.4 - Enhanced Turbo not working

Hi,
I have a MSI Z87-G45 Gaming that I have been putting through its paces for the past few weeks, paired with an Intel Core i7-4771 (3.5GHz, 3.9GHz single core turbo, 3.7GHz all-core turbo). It's been great so far, but I have a puzzle on my hands that I have not been able to explain.
Yesterday, happy with the results of various tests I had been running, I started on my final build. Before OS installation, I checked around to see if any new driver or firmware packages had been released since I had last downloaded them a few weeks ago. There was a new BIOS release - version 1.4 - which I grabbed and flashed. I did not pull the BIOS battery afterwards, but I did load the BIOS defaults before configuring things.
Everything appeared to be fine, but today I noticed that the "Enhanced Turbo" option in the BIOS does not appear to be working correctly. Under BIOS version 1.3, CoreTemp, RealTemp and CPU-Z all reported a multiplier of 39x with all cores fully loaded. With BIOS version 1.4, the processor hits 39x with a single-threaded task but drops to 37x with all cores loaded - I.e. it is behaving according to its standard Turbo profile.
I'm not interested in overclocking this system which is why I didn't buy a K-series processor in the first place - everything on the BIOS OC tab is default/auto except for the DRAM which is using a XMP profile - but the extra 200MHz per core is rather neat and something I would like to have.
Is anyone else using BIOS version 1.4 experiencing similar issues? If not, any thoughts on where the issue might lie would be most welcome.
MSI Z87-G45 Gaming - EIST enabled, Intel Turbo Boost enabled, Enhanced Turbo enabled
Intel Core i7-4771
Kingston Genesis 8GB DDR3-1600 (KHX16C9/8) (x4 for 32GB total)
Windows 7 Professional 64-bit

I've finally cracked it, so I thought I would add my findings to this thread in case anyone else runs into the same issue.
Under BIOS version 1.3, simply enabling Enhanced Turbo was apparently all that was needed to permit all cores to run with the highest multiplier.
Under BIOS version 1.4, this no longer appears to be the case. Although this setting lifts the multi-core Turbo Boost restrictions, Intel's default profile is still applied, in my case limiting the CPU to a multiplier of 37x with all cores fully loaded.
In addition to enabling Enhanced Turbo, the ratio limits under OC > CPU Features must be manually specified. With BIOS version 1.3, I had left these on their Auto setting and the highest multiplier had automatically been used. With 1.4, I had to manually select the highest multiplier to override the default Turbo Boost profile and get the desired result.

KT6V series bios version 2.0 released

Similar Messages

Maybe you are looking for