KT7 Pro MS6330 V1.4(?) 750-1200 Mhz Athlon cpu upgrade worth it?

Hi
I’m not experienced at any modifications except adding RAM!
I have looked at the discussions in the “Retired Intel/AMD” forum and am beginning to have second thoughts about all this but just wanted a definitive answer from the experts please!
I have a K7T Pro MS6330 board with BIOS version 1.4, (is that reeeally old?) according to the bootup screen and a AMD Athlon 750Mhz processor. I haven’t yet looked at which board version I have…. The manual says an upgrade “to 900Mhz or above”.
Having checked the AMD & MSI’s sites I believe can upgrade the CPU to a Athlon 1.2Ghz providing the board has a v1.6 or later BIOS. So far so good. I’m not sure which bios update I should use. Can I use the latest version available i.e version 3.6 or only version 1.6 ?. Apart from a new fan/cooler will I need a different power supply? What else might I need to install?
If I shouldn’t tackle all this what would be the highest rated Athlon I could use with the current BIOS? If it’s say a 950 Mhz & fan (but no PSU change ) would it really be worth it for an extra 150Mhz? The system’s used for word processing, surfing, some gaming but not much else. I really wanted to upgrade before the motherboard’s too old.
I’m also concerned about the warning: “It is risky to update BIOS manually. We don't recommend the beginner-users to do so”
Any advice gratefully received!
Thanks for your time
H

http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=97%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6330
are cpu you can use
3.5 was last actually relevant to your board bits in 3.6 will never effect you
follow directions and you will be fine
if using ntfs on drives get none fat 32 method
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=97%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6330
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=97%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6330

Similar Messages

IMac DV 400 mhz G3 CPU upgrade

Ok i have a iMac DV Slot loading with a G3 400 mhz processor in it is is possible to upgrade to a G4 processor and if i can how much should it cost and where can i have it done?
iMac DV G3 M5521 Mac OS X (10.3.9) 400 mhz 512K L2 Cache/ 192 ram/ 20 gig hd/dvd

fastmac.com offers a G4 processor upgrade, and there have been a few other processor upgrades available from various companies. The problem with slot loaders is that the CPU is soldered to the board, and thus requires you to send your entire logic board to them.
Its not particularly cheap either, and when you are done, you still have the same outdated graphics card, small screen, slow system bus, less capable optical drive, etc. YOu may find your money better spent on something like a used eMac or G4 iMac, which can probably be had pretty cheap nowadays and offer a lot more advantages. If you have a screen around, a mac mini would be a much better deal.

K7T Pro (MS6330) Processor Upgrade

Hi all
Just upgrading from a Duron 600 to Athlon 1200 T/Bird. Do i need to make any adjustments to the motherboard (K7T Pro MS6330) or BIOS for this to be accepted.
Cheers

Thanks for that, cleared the CMOS as per the book. When i booted up it came up with a 'CMOS checksum error' and would boot no further. I went into setup and, using my very limited knowledge, changed a couple of settings. Non of these i considered to be part of the problem however when i came out of setup it booted ok. I have re-booted a couple of times and no problem.
The supposed Athlon 1200 T/Bird i have installed was obviously a purchased second-hand. It is only showing as 900 in System properties. Do i need to make other changes to the bios or have i been misled.

I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM

Hello all,
I'm unable to burn DVDs on my MacBook Pro 2.16 GHz, 2GB 667 MHz DDR2 SDRAM running 10.4.8. When I go to burn a DVD I get one of two codes 0X8002006D, 0X80020022, why is that a 3,000 CPU cant burn a DVD. My Mac is total up to date with all software and firmware. I saw in the Discussions that I'm not the first person to have this issue but I don't see an answer from Apple, I'm pretty sure it not the DVDs (Memorex DVD-R 16X) because my ****** pc can burn them and it was a 100 pack that I used about 50 from it that I burn on both Macs and the ****** PC. I also have a Dual 2 GHz PowerPC G5 with 2.5 GB DDR SDRAM running 10.4.8 which is also unable to burn them and it also comes up with the same errors. I have not had this issue until I updated my Macs to 10.4.8, PLEASE HELP.
Thanks,
Coons

Yes I can play CDs and DVDs but I was not able to burn a 4.01GB folder, I have since decreased the folder size to 3.75 and was able to burn the DVD. I'm creating another just to double check, my G5 was unable to complete the task and I also gave a shot at a 2.77GB folder and it failed I also gave a 200Mb file a chance but it still did not burn. I was able to burn the same 200MB file on a CD, PLEASE I NEED HELP.

I have mac pro i7 , 8GB RAM , 750 HDD , can i install windows 7 ultimate 64 as a parrallals desktop?

i have mac pro i7 , 8GB RAM , 750 HDD , can i install windows 7 ultimate 64 as a parrallals desktop?

Hello and welcome to Apple Support Communities!
Yes, you can install Windows 7 Ultimate 64-bit in your Mac using Parallels for Mac. Just follow the instructions of the virtualization programs during the install. Should you need any assistance with the installation process, I strongly recommend contacting Parallels Tech Support (you must register with Parallels in order to have tech support).
Alternatively, you can always use Apple's BootCamp if you want to run Windows natively in your Mac. Check their support page, Apple has a lot of good links explaining this solution.
Hope this helps!

Ok, so i bought a 16GB DDR3 1333MHz RAM for my late 2011 13" MacBook Pro whose memory runs at 1067 MHz (I was also told that late 2011 MBPs run at 1333MHz, is mine an exception?)... Im looking for all possibilities to close the compatibility gap...

Ok, so i bought a 16GB DDR3 1333MHz RAM for my late 2011 13" MacBook Pro whose memory runs at 1067 MHz (I was also told that late 2011 MBPs run at 1333MHz, is mine an exception, if so, why?)... Im looking for all possibilities to close the compatibility gap because computer freezes at boot and was wondering if there was anything i could do to get this 16GB DDR3 1333MHz RAM to work at 1067MHz or somehow get my computer to run at 1333MHz?...

You don't have a late 2011 MB Pro.
You have a 2010 version. Your MB doesn't support 16GB. 8GB Max.
That's what it shows on your about this MAC.
You need to return the RAM and get 8GB ( 2 X 4GB ) 1066MHz.
Your system bus is set to 1066MHz.
You're having issues because you've installed more RAM than your MB can support. It's only reading 4GB per bank which totals to 8GB and not 16GB.

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

Open the Mac App Store application and see if iPhoto is under your "Purchases" tab.
Clinton

Attn: ALL APPLE PORTABLE OWNERS -Macbook Pro, MacBook Air Apple portable slowdown / kernel high CPU solution

Attn: ALL APPLE PORTABLE OWNERS -MacBook Pro, MacBook Air, Mac mini slowdown kernel / high CPU use problem and solution.
YOU COULD FRY YOUR COMPUTER IF YOU DO NOT FIX THIS PROBLEM SO PLEASE READ THIS ENTIRE MESSAGE!
YOUR MAC WILL THANK YOU
Hey all.
Like many of you I've got a newer Apple portable which slows down to an unusable level for an unknown reason. In my case a 13" mid 2009 Intel MacBook Pro Core 2 duo laptop. After many failed attempts to figure out what this nutty problem is I have discovered the problem, the solution and I have solved this for my own MacBook Pro. Since this fix it has been working immediately and consistently -without issue
I am sharing this with you in hopes that you to can fix your Apple portable yourself or so you know what to tell the Apple techs so they can quickly fix your Mac from this wacky and unfortunate kernel CPU hogging problem.
User Software Symptoms :
Your Apple portable computer periodically for an unknown reason slows down making everything frustratingly slow. This happens even when running previous apps that were never a problem; things that your Mac should be able to handle easily but for some reason now it can't.
Slowdown most often happens during high CPU use such as gaming, video playback/editing, etc. or when running multiple apps (even non CPU intensive apps) at the same time.
Possible Hardware Symptoms:
Your computer is making more noise than it did previously.
Your computer occasionally makes more noise but then gets quieter.
Your computer is always extremely quiet (too quiet) even during high CPU apps -worst case scenario.
It feels hotter than it normally does. Test: After several minutes of the slowness/high kernel CPU touch the computer to feel if it's hotter than normal.
Looking at Activity Monitor (in the Utilities folder) shows the kernel_task is going bonkers eating up CPU but you have no idea why.
After trying many different things to solve this problem such as :
PR ram reset, SMC reset, fresh OS install of 10.5 and 10.6 on external hard-drives, calling and speaking to various Apple tech people who had no ideas/solutions, etc. I had no luck.
Btw, if you're having the symptoms I've decscribed above I would not run the Apple Hardware check (read below as to why). You could fry your Mac!
After much testing I found the problem :
It is my belief that "recent" Apple portable computers are using low quality internal fans which soon stop working!
Fail time period seems to be about 1.0 years to 2.5 years of use but this fail rate could vary depending on use.
First noticeable symptoms (depending on what you notice) could be computer slowdown or your fan is making more noise than it normally does. This is your fan's lubrication slowly eroding making your fan spin slower and less smooth resulting in the louder noise and slower rpm spin speed. The slower fan spin speed means less cooling is happening for your computer. The effect on your computer is that the CPU and other chips are heating up! Overheating to be more specific. When your computer's chips overheat they get wonky and screw things up. Most often this seems to have the effect of making the kernel hog CPU resulting in a frustratingly slow user experience! Heat kills computer chips and it is extremely bad for them. Extreme overheat or repeated overheating has been said to shorten the life of computer chips or in extreme cases even fry them completely!
The longer this goes on without being fixed your fan loses more lubrication and spins slower and slower cooling lesser and lesser resulting in your CPU heating up more and more possibly shortening the life of your Mac! Eventually your fan will stop completely and you could fry your chips! My fan stopped completely and my MBP was running very quietly, too quietly. Luckily I did not fry my chips because I was avoiding using high CPU apps because I knew something was wrong due to the massive slow down and wonkiness when I'd run them.
Side Note:I'm a bit concerned about all those Mac mini servers which may be using the same defective low quality fans which cannot be easily serviced by their owners as they are co-located in some server facility. One positive thing is those facilities are usually well airconditioned keeping temps low.
I suggest you do not run the Apple hardware test if you suspect your computer is overheating because the hardware test can seriously heat up your Mac! I tried running this test and my Mac got so hot I had to shut it down forcefully and I was concerned I damaged the chips. If you want to run the Apple hardware check make sure your CPU temperature is ok and that your fan works well before you run the test.
IF YOU DON'T FIX THIS PROBLEM YOU COULD FRY YOUR COMPUTER DUE TO HEAT DAMAGE!
DO NOT IGNORE THIS PROBLEM YOUR MACS LIFE MAY DEPEND ON IT!
First you need to properly diagnose this problem and see if your CPU is getting to hot and you need to see if your fans are spinning at high rpms giving proper cooling, or if they are spinning at low rpms when running high intensive apps as your CPU temp increases.
TEST IF YOUR FAN(s) IS WORKING CORRECTLY :
Unfortunately Apple does not include CPU temperature reading software nor fan rpm speed software that I am aware of.
However, There are two free ways that I know of to check your CPU tempurature and your fan speed :
One app shows fan speed, and CPU heat, etc.
One app shows fan speed, CPU heat and allows you to adjust your fan speed settings.
One app is a dashboard widget, the other is a system preference.
I suggest you download both of these to check your computer statistics.
http://www.eidac.de/?p=134
http://www.islayer.com/apps/istatpro/
http://fan-control.en.softonic.com/mac
I am not exactly sure what proper CPU temperatures are for the different Apple computers and this will change given different CPU loads.
My MBP doesn't seem to function properly with anything around 90 degrees or higher (celcius).
It seems when the fan is operating normally the CPU temp should not stay above 78 degrees even under heavy load, at least with the apps I'm running in the room temperature I'm in.
I can post back later with more specific temps under longer load, etc. but I wanted to get this post up for people to read as soon as possible so they don't fry their Macs.
If a bad fan is your problem :
THERE ARE ONLY TWO SOLUTIONS FOR THIS PROBLEM :
Fix or replace your fan so it cools the CPU and other chips properly.
I fixed my fan myself and I didn't need to buy a new one. Total cost was about $8.00 because I had to buy a #00 sized screwdriver and had it shipped to me. Price includes shipping.
On my mid 2009 model MacBook Pro fixing the fan was incredibly easy :
Before I started doing this I wasn't 100% this was the problem so I decided to try to fix my fan instead of ordering a new one and replacing it. As it turns out I didn't need a new fan, I only needed to clean the existing fan and relube it's axl so it could spin easier like when it was new. It also didn't make sense to buy a brand new fan from an Apple authorized parts reseller selling me the same low quality fan for $49.00 which would probably fail in 2 years again. Prices for new comparable fans from different manufactures range from about $15.00 USD + shipping to around $49.00 USD + shipping depending on where you order them from and what brand you get.
How to fix / replace your internal fan on a mid 2009 MacBook Pro :
Please note : I am not a hardware technician, nor expert. If you decide to fix your Mac yourself you do so at your own risk through no fault of my own. Prior to opening up your Mac you should google around and learn how to do it correctly and safely so you won't damage your Mac. For example, it is possible for you to damage your Mac by static electricity from your body. To avoid this I believe proper procedure is that you wear a 'ground strap' (around your wrist) which you clip to your Mac's metal body so your body will not excude a charge into your Mac. I believe the idea here is to keep your body's charge level and your Mac's similar. Since I do not have a ground strap and fixing/replacing the fan doesn't require touching any chips I did not wear a ground strap during my fan fix. What I did was periodically repeatedly touch the metal case of my MBP hoping that would be enough and it was. Avoid unecessary actions that can build up a static charge in you. Once I started the repair I did not walk around the room building up an electrical charge in my body. Walking on carpet can often build up a large charge in us so it is better to be avoided while working on your Mac. Certain clothing can build up static charges. Combing hair, etc. If you need to get up from your repair when you come back make sure you first touch the Mac's metal case and not anything inside.
Now that we're done with the scary paranoia, below you will find some instructions on how I fixed my MBP's internal fan
Before you begin:
Check out someone's video (not mine) on how to remove / replace the fan (but not take it apart and repair it):
http://www.youtube.com/watch?v=AghE9newvbs
Check out someone's web page (not mine) on how to replace the fan in a mid 2009 MacBook Pro:
http://www.ifixit.com/Guide/Installing-MacBook-Pro-13-Inch-Unibody-Mid-2009-Fan/ 1338/1
How to repair your mid 2009 MacBook Pro fan:
Make sure you are in a 'secure' environment. No pets, no kids running around, no drinks near the Mac, etc.
Make sure your computer is unplugged from it's power supply and turned off. NOT slept. Totally off / powered down.
1. Get a size #00 phillips screwdriver (Hobby store, Radioshack, Amazon).
2. Open up your MBP by unscrewing the bottom (yes flip it over so it's resting upsidedown). Note where each screw goes because some are different lengths. I placed each one around my MBP where they go, insuring I know their order (don't jumble them up). Note which direction your MBP is facing when it's upside down so if you spin it around while working on it you still know where the screws go.
2b. Some recommend removing the MBP's battery but I didn't do this step. You probably should, just to be safe. Follow the online instructions from the web page I listed about disconnecting the battery.
3. Unscrew the fan's 3 holding screws.
4. Unplug the fan's electrical connection (lift it straight up off the board). If you need to you can try to pry it up while you lift with a non metal/non electrical conductive object like a spudger if you have one or -perhaps a pen cap. Before you remove it, look closely at how it's attached so when you put it back on you won't wonder if you're doing it correctly. There's only one way it can go because it cannot fit 'the wrong way' but looking at it closely will make you feel more confident popping it back on when the time comes.
5. Remove the fan - it easily lifts out.
6. Take the fan apart by unscrewing it's one screw then unlatching the plastic clips which hold it together.
7. Seperate the fan blades from the housing. Lift the fan blades off of the fan housing by pulling it straight out away from the housing.
8. Clean off the dust that's gathered. A can of compressed air helps here (I didn't have one). I used a little brush from my electric shaver kit which worked well. Once you've removed all the dust from the fan and surrounding areas proceed to the next step.
9. Reapply new lubrication. You need less than 1 drop. Be sure it covers the entire fan blade axl as this is what needs to be well lubricated. Make sure there isn't excess oil that will fly around when the axl/fan spins at high rpms. I used the only oil I had which was olive oil (for cooking!) but I do not suggest this. At the time I was doing this I didn't know my fan was the problem so I wasn't even sure I was going to relube it. You should probably use something more appropriate perhaps like 3 in 1 oil. A good idea would be to call the manufatures of these little fans and ask them. Maybe a hobby store knows of good lubricants for these purposes?
DO NOT use things like WD 40 as it's not a long term lubricant or so I've read.
10. Once your fan is now clean and oiled (make sure there isn't too much oil) reassmble the fan.
Push the fan blades/axl back into the housing shaft. Give it a few spins with your finger.
Screw together the fan housing then reclip the clips.
11. Place the now reassembled fan back into your Mac and screw it in place (3 screws).
12. Reattach the fan's electrical wiring by gently pushing it into place. Make sure you've got the right end facing down before you push it in place.
13. Once your Mac's internals are clean and reassembled, place the rear cover back on your Mac and screw it in place.
14. Double check you didn't forget anything like screws, tools, etc.
15. Boot up your Mac and monitor the temperature and fan speed using those programs.
Compare the previous temps/fan speed to the current temp/fan speed.
Run a high CPU intensive app where your computer has been slowing down.
You should now have a happy Mac
If you have this problem and this solution fixed it for you please post in this thread letting me and everyone else know!
Hope that helps.

Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Hi, Macbook Pro 10.6.8 yahoo ect tells me to upgrade Safari. I guess I can't unless I buy m.Lion. Now safari will not quit. Quit is no longer highighted on my safari drop down menu. Help

Hi, Macbook Pro 10.6.8 yahoo ect tells me to upgrade Safari. I guess I can't unless I buy m.Lion. Now safari will not quit. Quit is no longer highighted on my safari drop down menu. Help thanks, Mary

Hi Mary,
Force Quit Safari by clicking Option+Command+ESC
Cheers,
GB

I bought the macbook pro few months ago can i get the lion upgrade for free as a part of my software support?

i bought the macbook pro few months ago can i get the lion upgrade for free as a part of my software support?

They announced it; sorry, no free Lion:
"The Mac OS X Lion Up-To-Date upgrade is available at no additional charge via the Mac App Store to all customers who purchased a qualifying new Mac system from Apple or an Apple Authorized Reseller on or after June 6, 2011. Users must request their Up-To-Date upgrade within 30 days of purchase of their Mac computer. Customers who purchase a qualifying Mac between June 6, 2011 and the date when Lion is available in the Mac App Store will have 30 days from Lion’s official release date to make a request."

Can I upgrade my MacBook Pro RAM to 16Gb eventhough Apple advises 8GB max upgrade? Will it damage my computer if I do upgrade to 16Gb?

Hello All MacPro users,
I have a Macbook pro 2011 15" and since I am into composing music I use Logic Pro and Native Instruments which require quite some RAM accessing & loading complex samples and effects. I was wondering if I can upgrade the ram to 16gb or even more eventhough Apple indicates 8gb as max RAM upgrade. I read some contadictory information. some say that Macbook pro will support 16gb. What if I upgrade will it damage my system?
Appreciating your supports
Levon

as Kappy says " you can "
have a look at this pic - my 2011 Macbook Pro with 16GB.....doing the upgrade yourself if you're technically capable will not damage it.

I need to reinstall ADOBEACROBAT PRO 9 WIN, I dont have the money to upgrade to X and I have alrea

I need to reinstall ADOBE®ACROBAT® PRO 9 WIN, I dont have the money to upgrade to X and I have already paid for ADOBE®ACROBAT® PRO 9 WIN. Please help I really need the version of ADOBE®ACROBAT® PRO 9 WIN. I can not do my school work without it.
I have paid for this and when I moved I lost my disk, I have all the codes I need and I only want ADOBE®ACROBAT® PRO 9 WIN I really need this for school Please help

To download Acrobat 9 Professional :
Go to the web page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=en
Login with your Adobe ID and Password. Now instead of clicking on the download button copy and paste the following link on the address bar and hit enter :http://trials2.adobe.com/Applications/Acrobat/APRO/9/trials/AcroPro90_ efg.exe
This is the direct download link for Acrobat 9.
Note : This link would only work from the downloads page of Acrobat 10.

HT1199 I bought my Macbook pro in 2010 and had Snow Leopard which I upgraded when Mountain Lion was available. Now it keeps saying Mavarick is available. Is that another update? Or is that something else?

I bought my Macbook pro in 2010 and had Snow Leopard which I upgraded when Mountain Lion was available. Now it keeps saying Mavarick is available. Is that another update? Or is that something else?

Mavericks is an upgraded System in the same way that Mountain Lion was, the difference being that it's free. You can download the installer from the Mac App Store (the system requirements are the same as for Mountain Lion so you should be OK there). I've not got it: reports suggest that it is an improvement over Mountain Lion but it has some quirks that may or may not be an issue for you. It has its own forum, so you could look there for information.

HT201364 Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution thanks

Hi friends, I have a Mac Pro OS X 10.5.8, I want to upgrade newer version its possible, please help to get a solution
thanks
Mujeeb

See options below:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

KT7 Pro MS6330 V1.4(?) 750-1200 Mhz Athlon cpu upgrade worth it?

Similar Messages

Maybe you are looking for