KT880 Delta-FSR XP2400 266 fsb support?

Anyone know if the KT880 Delta-FSR does support my current CPU?
AMD XP2400 266fsb
Thanks.

Very odd chart, it shows the Duron Applebred CPU's as the only 266FSB CPU's supported. One would think that if it can use those, it could use the T-Breds and thornton's as well
This shows the board only supporting 333/400FSB

Similar Messages

[VIA] MSI KT880 Delta-FSR Bios problem

Hi!
I have MSI KT880 Delta-FSR motherboard.My problem is that about every second time when i start my pc BIOS settings will be factory settings.I have to go to bios and change every settings again away.

I have 120mm fan with my cooler.Temperature of the prosessor is about 44-47 celcius.Cooler is over one year old.
I have 2*512M PC 3200 memory.They are not same brand/make.In start i have one memory stick, 512M/Kingston and the problem was same.
All the answers are good what you are writing but i dont understand how those have an effect my BIOS problem ??Sometimes when i start my pc memory clock fz is 266 and its should be 400.I have to go bios the change it and like i write earlier put the onboard lan and ac97 enable.
I close pc this morning when i goto school.When i come afternoon home and turn my pc on i have this message:
"Scan devises,please wait...."
Hardware initiate failed,please check device.The bios does not be installed!Press(g) to continue.
Reboot and select proper boot device.When i do that there is only my cd-rom device.I cant choose HDD drive at all.
I shut down the pc and take another computer ( i have 5) bios battery and the pc start at once.Now i have tho follow can the problem be a consequence of that.

Self restarting on KT880 DELTA FSR while playing 3d Games

Hello, got this problem ..
when playing 3d games, computer restarts itself .. it's about after 5 minutes playing.
MSI KT880 DELTA FSR
MSI FX5750 ULTRA 3
HDD WD 120GB S-ATA
CPU 2500+ Barton
APACER 512Mb 400Mhz CL 2.5
PSU JJ 400W (good amps)
LG GSA DVD+-RW
FDD ALPS 3.5"
i thought it can by by weak PSU, but i change it by better PSU and nothing - problem remains. So I tried put other GPU (FX5600VTDR) and problem still remains :-(
WHat now ?
I thing it can be only by the BIOS version . cause on board is old version 1.3 and on the same configurated computer (except DVD-RW) is 1.6 and everyting works.
Any help ?
thanx
PS: All new drivers are installed, like a Hyperion, etc.

Hello,
I am not quite sure,
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=600&kind=1
Bios updates dont fix any important issues
Try this and test your memory.
http://www.memtest.org/download/1.26/memtest86+-1.26.floppy.zip
any errors means that the ram is faulty.
Do you have any other ram to use the in kt880?

KT880 DELTA FSR & Overclocking

Tried someone overclock Barton 2800+ on this board ?
Only by the FSB ?
Results ?

Quote
Originally posted by kolouch
In Czech republic you can buy it :-)
MSI KT880 DELTA FSR
+DualStream
+PCI/AGP Lock
I like this board :-)
Where you can see AGP/PCI frequency?
I havent got FSB high enough to see it in windows,but in memtest86+ i started to get picture corruption @ 240MHz FSB.
I´m still trying to get this run stable, atm i´m running 12x205MHz and uptime is about 10hours.
I´m not sure anymore is it this 2-phase power regulation which makes all these random boots.
Last boot was at 12x210MHz 2.0V and i was running EpoX 8K3A+ 12x212MHz 1.95V.

Win XP Installation problem on System with KT880 DELTA FSR

WHen I try install win xp with sp2 included, installation fails in about 19 minute to end in graphical part of installation.
when installation crashes i see only blue screen with
IRQL_NOT_LESS_OR_EQUAL
configuration is here
CyberCase CY 229 ATX se zdrojem 400W
MB MSI KT880 Delta FSR
CPU Athlon XP 2800+ Barton BOX
DIMM 512 CL 2.5 8x32 Apacer
GPU Sapphire Radeon 9600
FDD ALPS 3.5"
HDD WD 80GB IDE on IDE 1
DVD RW LG GSA 4160B Dual on IDE 2
I tried in BIOS agp 4x, vlink and fastwrite disabled, etc..
Help please ..

You can test the memory by downloading this program,
http://www.memtest.org/download/1.40/memtest86+-1.40.floppy.zip
Creates a bootdisk which you must boot from. (Disk cannot be read in windows)
If the PSU cannot provide enough power then running the memory at a lower frequency can help, as 333Mhz uses less power than 400Mhz.
Test the memory at 333Mhz and see if you get any errors, maybe ask a friend to run the memory at 400Mhz with memtest.
If it does run at 400Mhz (200Mhz) without any errors then it is not faulty.
From this point forward you will always test any memory modules that you buy with memtest.
It is a very useful program.

MOVED: MSI KT880 Delta-FSR - problem with multiplier

This topic has been moved to Overclockers & Modding Corner.
MSI KT880 Delta-FSR - problem with multiplier

http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
wiretrick it so multipliers under 12.5 will work
assuming the cpu is an old unlocked one

[VIA] KT880 Delta FSR with VIA Vinyl has problems with MIC

I have problem with my MB, can't get to select MIC for input way, all that I get is Vinyl AC'97 Audio (WAVE) for playback device and also for recording device, and that is all i get for recording device. I lost that option since I instaled SATA HDD. Previously I had old paralel ATA HDD. Please HELP!

Misteriously, the problem is solved. I don't known how happen but is gone.
But, if i unplug the power cord from the pc or from the UPS the problem persist. I think that is a incompatibility issue with voltages or with video card, anyway is "mid" solved.
There aren't so many computer shop but i post these links in spanish:
http://www.computadoraspormenos.com
http://www.computadorasenlared.com
http://www.mpmcomputer.com
http://www.eliptek.com.do
http://www.samanel.com
Individual Sale Market
http://www.emarket.com.do/index.php?seccion=mercado&funcion=ver&categoria=3&PHPSESSID=5388a4b0ddf2f9f76193cee453c8b863
Thanks a lot for you appreciated help!!!

KT880 Delta-FSR Info...

Those of you still wondering if VIA will come out with dual channel memory for K7 Motherboards, check this out...
http://www.via.com.tw/en/Digital%20Library/PR040212KT880.jsp

That's been known for quite some time since early Feb. in fact.

[VIA] KT880 Delta-FSR need feed back on this board

I am looking to buy this board I realy want a VIA chipset my proposed setup is this
xp3200+
standard cd rom
120 gig Hatachi deskstar Pata
Gainward FX5900XT golden sample
2x 512 Ozc premiere pc3200 cas 2.5 3-3-3-8 (spd)
note I already have the 3200+ bought so recomendations on a mobile cpu will be pointless

ok thanks! I just placed my order from mwave sweet price 52 bucks for a new board hope this thing works out ! any tips on set up will be apreciated !
I will be using a Ozc Powerstream 550 so I am sure that power will not be a issue.
Thanks again!

KT880 DELTA mainboard and 2D speed decrease

Hi there!!
I have upgraded mainboard from MSI K7T266 Pro2-A to MSI KT880 DELTA.
After that upgrade, speed of 2D Graphics radically decreased. I was trying to change values of AGP in BIOS (Speed, Fastwrite), but really nothing helped.
It is really annoying. The screen is scrolling, everything is drawing very slow. I am working with 2D graphics...
I have GeForce 2 MX400. (I am working in 2D, so i don't need to buy new card)
Is some possibility to fix this problem?
Thank You a lot.
KT880 DELTA FSR, BIOS v1.9
AMD Athlon XP 1800+ (overclocked, issue tested also without overclocking at 1800+)
GeForce 2 MX400
512 MB RAM PC3200 (2x256)
SB Audigy 2 OEM
ESS Modem
IDE HDD, DVDRW, CDRW

Didn't quite understand if you did the Repair install of Windows, with the following updates. Please have as little hard ware as possible when doing this. Add PCI-cards etc afterwards.
Here is where you can do a 5 minute check of your system:
http://www.pcpitstop.com/
Another thing you should consider is the antivirusprogram. Try having it disabled. Also have a try-out while in SafeMode.
Edit: As Dr Stu advices:
Codegen makes silent both 350 and 400 Watt PSUs. Please say a bit more on what PSU you got.
Edit: Went to PCPitstop myself for a check of the 2D results. Hrm, I don't want to brag, but... To explain, the first list of numbers is for the score, the second the resolution, the third how many tested PCs with that config, and finally the name and model of the graphics card.
"Video
Score Bits /
Pixel # PCs
Tested Video board and driver description
205 32 (yours) RADEON 9600 SERIES
150 32 20 RADEON 9800 PRO
143 32 21 NVIDIA GeForce FX 5600
141 32 23 NVIDIA GeForce4 Ti 4200 with AGP8X
140 32 14 RADEON 9800 SERIES
138 32 25 NVIDIA GeForce FX 5700LE
129 32 42 NVIDIA GeForce4 Ti 4200
123 32 74 RADEON 9600 SERIES
120 32 11 ALL-IN-WONDER 9600 SERIES
119 32 152 NVIDIA GeForce FX 5200
116 32 24 NVIDIA GeForce4 Ti 4600
114 32 36 RADEON 9550
114 32 31 NVIDIA GeForce FX 5200 (Microsoft Corporation)
114 32 43 NVIDIA GeForce FX 5500
113 32 17 NVIDIA GeForce 6600
106 32 14 NVIDIA GeForce3 Ti 200
104 32 24 NVIDIA GeForce 6600 GT
104 32 44 NVIDIA GeForce4 MX 440 with AGP8X
102 32 15 NVIDIA GeForce4 MX 4000 (Microsoft Corporation)
101 32 12 NVIDIA GeForce2 MX
100 32 13 NVIDIA GeForce4 MX 440 with AGP8X (Microsoft Corporation)
100 32 44 NVIDIA GeForce 6200
100 32 52 NVIDIA GeForce4 MX 440
97 32 26 RADEON 9000 SERIES
97 32 11 SiS 650_651_M650_M652_740
95 32 38 NVIDIA GeForce4 MX 420 "

KT880 Delta series bios v 1.8 released

MSI has posted bios version 1.8 for the KT880 Delta series.
Update description:-
-Support low speed CPU fan.
-Update VIA Raid firmware.

Pushed a copy to the bios area.

DELTA-FSR or DELTA-LSR

Hi friends!
Which the difference between KT880 DELTA-LSR and KT880 DELTA-FSR?

MSI standard referencing is:
L = LAN = 10/100 MB
F = Fast Ethernet = GB
and I = Firewire
So the difference should be in the LAN. I see the MSI product page doesn't mention a non-GB version which is odd but it doesn't mention Firewire either.

2D Screen Draw Issues - KT880 Delta

Ok, here I am again after resolving all the other issues.
It would appear that I am having some slight 2D screen draw issues. As with everyone else that has posted in these forums along the same lines with the KT880 Delta everything is fine with 3D. For some reason it is only with 3D.
So far I have done the following:
Moved my Soundblaster Live Card to the 5th PCI Slot to avoid any conflict.
Installed, Uninstalled and reinstalled both sound and nVidia drivers
Disabled VLink 8x in the bios
Set AGP to 4x in the bios (I only have a 4x AGP card currently)
Set the cache to 128mb
First installed the correct 4-in-1 drivers, then superceded thoses with the Hyperion drivers instead.
Despite all this I am still getting draw issues when minimising and maximizing windows, scrolling through web sites, and dragging open windows around the desktop. However, I have tried 2d drawing tests on windows media player 10, as well as pitstop (that actually told me I had a good setup!!)
So, not too sure what to do...any more help would be great.
Specs are:
MSI KT880 Board
Sempron 2800+ 2.0ghz CPU
1.5Ghz DDR333 memory
Gainward MX440 128Mb 4x AGP card
Creative Soundblaster Live! 1024 card
350w PSU (Not sure what type it is!!!)
I hope thats enough information

This appears to be a recurring problem with the KT880 across several different graphic cards (mostly NVIDIA). I've never seen so many complaints specific to 2D graphics collectively as have been reported here for just one particular mainboard. There is talk of a BETA BIOS that solved at least one case, but not others:
KT880 Slow 2D Performance with Leadtek 6600GT AGP
KT880 Screen Draw problem
KT880 DELTA mainboard and 2D speed decrease
MSI kt880 Delta + Graphics card = problems
KT880 Slow Screen Draw and other problems
KT880 DELTA FSR Problem with graphics in Win XP
The number of reported cases is more than the # of threads because some users entered into existing threads to report they had the same problem with KT880. MSI should be investigating this issue.

KT880 Delta 3GB DDR @ 400 with XP3200 Barton @ 400 fsb

Hi All,
First off... I've been reading lots of usefull info posted on this site... But I dont have the time to absorb and fully assymilate everything. (sorry for spelling)
I really do need some help / info / advice.....
System : XP3200 Barton 400 fsb
: MSI KT880 Delta. Latest Bios (NOT BETA BIOS)
: 3 gb ddr 400 Ram
: Terratec EWS88MT Sound Card (IRQ 3)
: 120 bg Maxtor 8mg Cache
: PSU 550 watts
I am trying to use 3gb ddr in single channel mode. however if a place 2 dimms in socket 1 & 3 it uses them fine in dual channel mode. Now i want to use all three, so add one in socket 2... EEEEEEK @ boot check says read write error checing NVram.
Next I change DIMMS to other sockets, regardless of what DIMM's are in what socket if im using 3gb it says read write error.. only 2 gb works properly and fully recognises the memory.....
I bought the memory from the same place, same manufacturer, same clock speed, same spec and They all look identickle now forgive me if im wrong but i also bought the MOBO as it said could use 3gb in single channel mode...
My Brain is about to meltdown can anybody help me.... Please... Please....
Thanks in advance

Hi Guys I'm back again
Ok here goes... Following all the suggestions above and lots of very intensive reading (As novice in Training ) I am pleased to advise that i am no futher along the road to sorting the memory error and also changing the IRQ in XP not that that wold help any.
I bought a good 600w PSU with 30A on the 3.3v rail and all other rails capable to run :
3 x HDD
1 x SoundCard
Thats is no more peripherals in there am trying to keep it as minimal as possibe.
Oh and I upgraded my GFX card to a Radion 9550 256m agpx8 thats very nice and seems to work well.
Right then has anyone anymore suggestions apart from throwing this board in the dogs kennel ??
Best Regards
Claire

KT880 Delta LSR doesn't support second sound card?

Hello,
I've just bought my new KT880 Delta board because of burning my old KT4V.
In my last configuration Ii had sound on bord (5.1) and one sound card added for microphone and headphones.
Now i can't force my KT880 Delta LSR to support two sound card on the same time. When I don't plug PCI card system support card-on-board.
But when I add this PCI card system dosen't see onboard card. In BIOS onbord card is turned on.
What should I do to solve my problem?
BRGDS
Max.

Quote from: Doctor Stu on 24-May-05, 04:34:01
maxisus, maybe the PCI card is conflicting with onboard?
have you tried the PCI sound card in another slot?
No, i didn't try. I thought that is no different witch pci slot you use.
Quote from: Doctor Stu on 24-May-05, 04:34:01
did you do a fresh install of windows when you replaced the mobo?
yes, i've formated hdd and installed all once again
Quote from: Doctor Stu on 24-May-05, 04:34:01
also KT880 probably needs more power than KT4V - if your PSU is now not powerful enough, some devices cannot start up correctly.
I have got 350 Watt - i bought new because of special 4-pin plug for CPU. In the shop gays sad PSU should be enought for my configuraction of pc.

KT880 Delta-FSR XP2400 266 fsb support?

Similar Messages

Maybe you are looking for