Kudos for 10GR2 GridControl install

Nice job on the installation of the 10G R2 OEM GC product. Doc and quick install guides were good. Prereqchecker is good; could use a little more depth, but it will get there. Overall easier, faster, simpler install. Thanks for more browser support. Web interface is faster too... good job.. catharine

If you 3rd party software needs 32bit libraries then download 64bit SPARC version (of database (client installtion is one of the option)) and install it.
32bit libraries are located in $ORACLE_HOME/lib32
There is also Instant client for Solaris SPARC 32bit. If this option will be enough then you can download it here: http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/solsoft.html

Similar Messages

Do I need to install oracle database 10gr2 before installing Oracle applica

I am new to Oracle application server. I am going to install Oracle application server 10g. From what I read, it looks like I need to install oracle database 10gR2 first on the SAME server? Is that correct?
If I do so, oracle_home will be point to where? to the Oracle application server home directory, or oracle db directory?
Thank you very much for you help.

hi,
Even i am new to oracle application server and had the same doubt that you have.
When you install Application Server there would be two tiers installed, application tier and middle tier, these tiers can be running from the same machine or different machines.
These tiers will have a meta data repository to store application server related data, this database will be installed along with application server.
It is upto you to install "oracle database 10gR2 " before or after installaion of application server, this will be an independent database which will have its own home, but after this installation you will have three homes, ex: infra_home,mid_home and 10gR2_home.
by default oracle_home is set to the last installation that happens so if you install the database 10gR2 after installing application server it will point to 10gR2_home, but if you install 10gR2 before and application server later then the oracle home will be infra_home(if both the middle tier and infratier are on the same machine)
you can always change the oracle home by using set ORACLE_HOME=path/to/oracle/home( in windows)
or export ORACLE_HOME=path/to/oracle/home (in unix)
hope this helps....
regards

Cannot view InfoPath Form on SHarePoint 2013 since I removed SkyDrive for Business and installed OneDrive For Business

I removed SkyDrive for Business and installed OneDrive for Business on my laptop. After that, I had problems opening a Word and Excel document in a SharePoint site (SP2013). After installing Service Pack2 from Office2010, this problem is solved.
But I still have the same problem with InfoPath. Whenever I click an InfoPath form (I have InfoPath 2010 on my laptop),...
... I get the error "cannot display web page".
When I change the URL
ms-infopath:ofe|u|http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
into
http://intranet.water-link.be/samenwerken/awwit/Autorisaties/Gebruikersbeheer/2015-02-25%20Aanvraag%20gebruikersbeheer%20voor%20Stephanie%20Geeraerts.xml
I can open the InfoPath form and read it.
Any ideas about how to fix this ? I already tried to restore the Office 2010 via Control Panel - Install Programs but without any success...

Hi Gert,
As I understand, you can’t open InfoPath form in SharePoint 2013 unless you change the URL without “ms-infopath:ofe|u|”.
There are some reasons which maybe cause this issue, and you can try to do things below:
Access CA -> General Application Settings -> Configure InfoPath Form Service -> Check the two options in User Browser-enabled Form Templates.
Go into the registry by typing regedit from the Run line and rename the SharePoint.OpenDocuments.5 key (ex. SharePoint.OpenDocuments.5.old) under HKEY_CLASSES_ROOT.
In library settings, click "relink documents to this library".
Here are some similar posts for your reference:
http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/quot-the-webpage-cannot-be-displayed-quot-when-trying-to-open-edit-an-office-file-from-a-sharepoint-2013-site.aspx
http://www.infopathdev.com/forums/t/28998.aspx
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HOW TO: Add /manipulate columns for a GridControl

HOW TO: Add /manipulate columns for a GridControl when the columns (attributes) are from different entity objects.
This HOWTO describes the basic steps of using attributes from different entity objects for a GridControl.
One way you can create a GridControl which contain attributes from different entity objects is to create a view object and base it on the entity objects which contain
the desired attributes.
Here are the basic steps:
1.Create a new view object (or use an existing view object) by selecting File>New from the menu, clicking the Business Components tab and double-clicking
on the View Object icon.
2.In the View Object wizard change the name to something meaningful.
3.Select the entity objects you will base your view object on.
4.Nivigate to the attribute screen and select the attributes you would like to include in your view object from each entity object. At this point you can also create
a new attribute by clicking the "New" button. The new attribute can be a concatenation of other attributes, derived from a calculation etc.
5.In the query panel of the View Object wizard, click "Expert mode" and enter a query statement. You write complex queries such as decoding a set of attribute
values.
6.Add your newly to your newly created view object to the application module by double-clicking on the application module in the navigation pane and selecting
your view object from the list.
7.Create a new row set.
8.Bind row set to a query by editing their queryinfo property and selecting your view object and its attributes from the queryInfo pane.
9.Create a GridControl and bind it to the row set by editing the dataItemName property of the GridControl. Since the GridControl is bound at the row set level
all of the related attributes are automatically added.
null

Michael,
Are you intending this as a commercial solution or a work around?
To take an existing equivalent, one would build a view in the database tailored for each grid in an Oracle Forms application. Or a separate query layered over tables for each form/grid in a Delphi or Access application? Even if it is ninety nine percent the same over half a dozen forms/grids?
And now you've added a whole slew of "slightly different" rowSetInfos to maintain.
So if you wanted to add a column that needs to appear everywhere... you've just increased the workload multi-fold?
That would be a management nightmare, wouldn't it? Not to mention yet more performance cost and a slower system?
Hmmmm..... I'm not sure I like where this is headed... someone needs to do some convincing...
null

My customized Yahoo Toolbar (v. 2.3.5.20110120033202) would not load properly after I installed the new Firefox 5.0, even though when it checked for incompatibilities while installing it made no mention of the Yahoo toolbar, only the Google toolbar

My elongated (statement) question fully explains the problem I am inquiring about. Only some rudimentary features of my existing Yahoo toolbar were displayed and it was missing all of my previously selected icons which are on file with Yahoo, not my computer. You also could not right or left click for a menu on the options icon (gear icon) to the right of the search window.
It would seem that there are incompatibility issues between the new 5.0 Firefox and the existing most current version of the Yahoo Toolbar add-on. I don't know know why this wasn't detected in the installation scan for compatibility of installed add-ons.
I have re-installed the 4.0 Firefox for the time being in order to regain the use of the Yahoo toolbar and all it's features which I use regularly.
Does anyone have any other suggestions as to what the problem may be?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

I dont recall when I have been more frustrated.... the "loops" I am in on the web for support are endless. After downloading Yosemite on my Mac my CS6 no longer works. On your support web site you state the following for downloading and installing prev

I dont recall when I have been more frustrated.... the "loops" I am in on the web for support are endless. After downloading Yosemite on my Mac my CS6 no longer works. On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required. When I attempted to open it to download "Previous Versions" I could not. I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated.... Rich@

When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize. Please down load Adobe Support Advisor to detect the problem" I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available. I then go to that site and am told to go to CC for desktop apps, that requires me to download CC... I don't want CC.. just want to have my CS6 PS work again.... so frustrating...

HT1338 I have MacBook with OS 10.5.8. Is there any way for me to install and run keynote on this machine? Do I need to upgrade OS and how? Thanks

I have MacBook with OS 10.5.8
Is there any way for me to install and run Keynote on this machine? Thanks

Welcome to the Apple Support Communities
Keynote '09 is compatible with your computer, but you won't get the latest Keynote version running that version. As you have an Early 2008 MacBook, first I recommend you to update to Mac OS X Snow Leopard to get newer versions of all applications but without losing any applications > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Make a backup before upgrading.
The DVD contains Mac OS X 10.6.3, so after upgrading, open  > Software Update to update to 10.6.8. Then, you will get access to the App Store.
However, the Keynote version available in the App Store is only compatible with OS X 10.7.5 or newer, so now you have two options:
1. Upgrade to OS X Lion and purchase Keynote from the App Store.
2. Keep Mac OS X Leopard or Snow Leopard, and buy Keynote on a DVD in eBay or Amazon. Note that you won't be running the most recent Keynote version, but it doesn't mind (the latest version only adds iCloud support)

I have Cs2 andOffice for Mac 2004 installed on an Os 10.6.3 system. This weekend my computer did an auto pdate to Os 10.6.8 and now I cannot save or print from any office or CS2 Apps. What happened. Office also freezes and I have to force quit.

I had Cs2 and Office for Mac 2004 installed on an OS 10.6.3 system. Worked fine. This weekend my computer did an auto update to OS 10.6.8 and now I cannot save or print from any office or CS2 Apps. What happened. Office also freezes and I have to force quit. Any advise. System or Software problem?

Bad timing. Reapply the security update:
http://support.apple.com/kb/DL1489
What happened is that version 1.0 of the security update was available for a bit of time this weekend, and that disabled Rosetta. Version 1.1 brought it back.

How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

As long as your license supports both platforms you should only have to download the Mac version and install/activate using your serial number. If you need help finding a link to download the file, please indicate the PSE version you need.

My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again.

Microsoft Word 2008 refuses to work for me after installing the most recent Mavericks update, 10.9.1. It is 2008, yet Excel and Powerpoint work just fine. Help!

Microsoft Word 2008 refuses to work for me after installing the most recent Mavericks update, 10.9.1. It is 2008, yet Excel and Powerpoint work just fine. Help!

I suggest you do one of two things:
1. Upgrade to Office 2011 for OS X.
2. Try the freeware, Libre Office.

I can't open swf files for schoolwork. Installed VCL, Flip4Mac and Adobe flash and shockwave players. Can get white screen with connection erro message with adobe flash player. Help me!

i can't open swf files for schoolwork. Installed VCL, Flip4Mac and Adobe flash and shockwave players. Can get white screen with connection erro message with adobe flash player. Help me!

Apple dropped playback support for .swf formats in QuickTime almost ten years ago.
Adobe Flash Player is the only way to view them.

Function module for creation of Installed base along with product

Hi,
Function module for creation of installed based with product for the business partner.

Try
BAPI_IBASE_CREATE
IB_IBASE_CREATE
IB_IBASE_CREATE_INITIAL
CRM_IBASE_COMP_CREATE
CRM_IBASE_CREATE
IB_COM2_CREATE_IBASE
IB_COM_CREATE_IBASE_INITIAL
Regards,
Kaushal

Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). What is the best way for me to install it?

Hi, I purchased Acrobat Standard XI, but can only find the CD for windows. I have a mac (I have access to an external CD drive and I have the product keys for windows). I have never installed it anywhere else. What is the best way for me to install it?

Hi lintonm86921521,
I can understand your concern & will guide you through this.
I am so sorry to inform you that Acrobat XI Standard is not available on Mac, you can only use it on your Windows computer.
You can also refer to the system requirements at : System requirements | Acrobat family of products—older versions (XI, X, 9)
In case if you have any further query please let us know, we will be happy to help you.
Regards,
Aadesh

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Kudos for 10GR2 GridControl install

Similar Messages

Maybe you are looking for