Kvaser time history file incorrectly converting time channel
I am using Kvaser Memorator for collecting data and when I use an older version of Kvaser Memorator Professional (2.0.6.600) to extract a .log file and then run through the CAN converter in Diadem 2011, the time channel comes in correctly. If I use a newer version of Professional (3.02.186) to extract the same .log file and run through the CAN converter in Diadem 2011, the time channel is off by a factor of 10 (example a 30 second test now shows 3 seconds). We have tried other permutations such as different files and even different versions of Diadem, but it still comes back to different versions of Kvaser Memorator Professional's writing of the .log file (or interpretation thereof by Diadem). Attached is the .log file from the 3.02.186 version of Kvaser Memorator Professional.
Any help is appreciated.
Attachments:
test 1 2012-07-18_21-16-38.log 601 KB
Hello Rapom,
As we assumed has Kvaser changed the file format. That was done in 2011-05-03 for version 2.9.850. Now they have a file format which is different (only the timestamp with a factor 10) to Vektor LOG files. In consequence to those facts we are going to add a new separate buslog converter for Kvaser log files for the next DIAdem version. In the meantime you need to calculate the offset correction by your own.
Greetings
Walter
Similar Messages
-
Time machine was not working after yosemite upgrade on new and old MacBooks in my house. I bought a new time machine and migrated time machine files to new time capsule. I changed the names of the older sparse bundles to the default values. Yosemite still does not recognize them.
I presume the bought a time machine means a time capsule.
How did you migrate the Time Machine files?
From where? A Time Capsule or external drive?
It is difficult to get TM working with Yosemite.. since it doesn't work after the upgrade on the old TM backup.. it will not work on the migrated files either.
You simply start a new backup and store the old backups for a few months until you are ready to dump them.
The instructions for inheriting old backups is B5 and B6 here.
http://pondini.org/TM/Troubleshooting.html
However it is just unlikely to work.. TM in Yosemite is very different. Broken even.
I also strongly recommend people to use Carbon Copy Cloner or some other 3rd party backup until Apple get the bugs fixed. And after several months.. they are still rampant. -
Time machine file errors using Time capsule
OK
I have been using a time capsule to backup my Intel Imac (2.8Ghz 1TB HD) for about 8 months. when it works it works but twice now I have had failures that have resulted in me having to start from scratch.
Things I have tired have been
rebooting
Removing the latest files from the time capsule folder and retrying
removing the com.apple.timemchine.plist file from preferences
Of course all fail and my last backup (started 6-27-08) is not toast. What makes me mad is I can still access the data fine using TM but it will not continue to update. I created a folder on my TC to place the old sparse bundle in and am now currently 8gb into 1 100gb backup.
How can I avoid having to do this every 3-6 months. Is this normal or is there something unique to my system?
thanksthis happens because you must have removed the mounted virtual volume with your filevaulted home directory from TM exclusion list. when you are logged in go to TM system preferences->options. normally, you should see your filevauled home directory on the exlcusion list. that means that the mounted virtual volume with your home directory is excluded from backups. if you remove it from the exclusion list then TM will back it up unencrypted as a separate hard drive. so if it's not on the list do the following. delete the file /library/preferences/com.apple.timemachine.plist. then go to TM system preferences and set it up again. check that the mounted home folder is on the exclusion list. then it won't be backed up anymore in the unencrypted form and the only thing that will be backed up is the encrypted sparse bundle itself.
-
Canon S100 Photo Capture Time Correct, but Video Capture Time Is Wrong
I have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place?
I looked at what the metadata looks like in Bridge.
PHOTO:
Date Created = Correct Capture Time
Date File Modified = The time I imported the file into LR.
VIDEO:
Date Created = Capture Time + 8 hours
Date File Modified = Correct Capture Time
Thanks in advance for any help you can provide!In general, LR doesn't know how to read video metadata. It uses the file's date-modified (as set by the operating system) for filtering, sorting, and pre-populating the Metadata > Edit Capture Time dialog, but it uses the file's date-created (as set by the operating system) to display in the grid view.
So you might look for a file utility that lets you set the file's date-created to be the same as the file's date-modified (note that on Windows, at least, copying a file changes the date-created but preserves the date-modified).
See and vote on these topics:
http://feedback.photoshop.com/photoshop_family/topics/inconsistent_dates_for_files_missing _date_time_metadata
http://feedback.photoshop.com/photoshop_family/topics/lr4_beta_video_tagging_not_complete -
How can I convert multiple files at one time and not one at a time
How can I convert multiple files at one time and not one at a time
Hi Plissey1950,
Sorry for the lengthy delay to a response. Are you trying to convert multiple files to individual PDF files at the same time? (not combine them). If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
Thanks,
David -
Convert morethan one file at a time?
Can i convert 1000 files at a time?
or
want to use another service?Adobe Acrobat desktop application can batch-export PDF to Office:
http://www.adobe.com/products/acrobat.html
Choose "Try" on right side to download trial.
If you'd like to see us add this to our ExportPDF service, please vote or comment on this request on our Ideas page:
http://forums.adobe.com/ideas/1499
Dave -
Batch Sequences can't convert 10.000 pdf-files at one time
I have Acrobat Professional 7.0 and I am running on Windows XP.
To convert from PDF to EPS I am using Advanced - Batch processing - Batch Sequences.
Every week I have around 5.000 PDF-files which have to convert to EPS without any problems.
Sometimes I have more than 10.000 PDF-files. After converting to EPS I thought Acrobat Pro was finishing to convert all the PDF, but if I look at the number of EPS, it seems Acrobat Pro didn't convert them all and it didn't give any error message.
This always happened when I have more than 10.000 PDF-files.I think Batch sequences cannot convert above 10.000 files at one time.
Is this a known issue? Is there any solution?File > Export > Export Multiple Files will work as well.
You can choose your conversion settings in Edit > Preferences > General > Convert from PDF. -
Convert standard video files in to flv file at run time
Hello All
How can we convert standard video files in to flv file at run
time like
you tube and
Google Video is there any
script or tool to do this. This is urgent.
I have one project in this project client requiring function
like whatever standard video file he upload, it will be play in
.flv formate
Any help is appreciated
Naved AnsariI think you need the Macromedia Flash Media Server to be able
to do what you are asking. Flash 8 can with a Flash Video Encoder
but it does not do it on the fly. There maybe other 3rd party
servers that you can sign-up that allow you do this but if you are
looking for your own solution you will need the FMS 2.0.
Tim -
Convert Safari History lastvisiteddate to date time
I want to Convert Safari History lastvisiteddate to date time.
Post Author: newcruser
CA Forum: Crystal Reports
Thanks
This is easy...second group based on the second formula 'for each hour'.
How you group by 15 minutes?.
i want to group by every 15 minutes starting from 9 AM to 5 PM.
First i need to create a time range and then use that time range to group?. Or any other simple and best way to solve this?. Please help
How to create time range from 9 AM to 5 PM? -
The subject heading says it all: Distiller will suddenly close/crash the *SECOND* time I open a file for converting to PDF.
But I think I have a clue why this is happening. Typically, I use Distiller to convert EPS or PS files into PDFs. Also, almost without fail, I embed the required fonts (exclusively Type 1) directly into the EPS/PS files (using the required PFA format) so no local fonts on my computer are needed to be looked for by Distiller to be embedded in the resulting PDF; they're already in the EPS/PS files.
But yesterday, I attempted to convert some EPS/PS files to PDFs using Distiller in which I had NOT embedded the Type 1 fonts (in PFA format, of course) in the source EPS/PS files. The first such conversion would work (in which I select "Open" and choose an EPS/PS file for conversion), but after that initial conversion, the *SECOND* time I clicked on "Open" (open file), Distiller would immediately close/crash.
I then searched the web for answers, and discovered some people were having trouble getting Distiller to initialize if any of their computer system fonts were read-only. So, I went back to my EPS/PS files and embedded the required Type 1 (PFA format) fonts into them, and then—magically—Distiller worked without a hitch: I could open and convert any number of them in succession, with Distiller never closing/crashing.
So, I concluded the reason that Distiller had been crashing upon the second attempted opening of a file (again, simply by pressing the "open" button to search for a file to convert, *not* after selecting a file) must have had something to do with Distiller scanning my computer's installed fonts when there was no embedded PFA font to reference, and a read-only font on my system was causing the problem. However, I looked in the two logical places where my fonts should be located (c:\psfonts and c:\windows\fonts), but found *no* font files' attributes set to "read-only" So, I'm stumped.
I'm using Distiller Pro 10.1.1316 (acrodist.exe) on a Win 8.1 machine. I've found similar posts, going back to 2004, about Distiller immediately crashing after opening when some fonts are read-only; I haven't yet found a post about anyone successfully using Distiller to convert one EPS or PS file to PDF, and then having the program crash when the "Open" button is pressed subsequently. Any clues, anyone?Never heard about the crash and that does not sound normal. Be sure to do the updates to Acrobat in case that resolves the issue. You might also check the font settings in the settings file and check to ignore the error if the font can not be embedded and Distiller should use what it considers to be the closest system font.
-
How can i convert a quick time movie file to a cd that will play in a car stereo?
how can i convert a quick time movie file to a cd that will play in a car stereo?
In quicktime, I would try File -> Export -> Audio. It will create an audio file. Then drop it onto your playlist into iTunes. Burn the list from itunes with File -> Burn to disk and then select Audio CD.
If you have Quicktime 7 it should be easier and export to AIFF directly -
I just downloaded the new itunes so I can sync music to my iphone 5 and when I go to open the new itunes, a message pops up that says "Run time Error, an application has made an attempt to upload this file incorrectly"?
Hello there, tmiller25.
The following Knowledge Base article offers up some great steps for troubleshooting your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How can I delete my entire History file, without doing it one site at a time?
I am able to delete a given site in my History file by right-clicking on it and indicating to delete it. How do I erase the entire file when it is no longer of any use to me?
You can delete the places.sqlite file to remove all history.
Firefox will use the most recent JSON backup in the bookmarkbackups folder to rebuild the bookmarks.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
How do you install CS5 onto a new computer without Time Machine/file transfer
I'm not getting a new computer, but my current one is getting a little old (Macbook Pro V. 10.6.8) and I'm afraid it might crash if I download the newest Maverick system, which is why I want to make absolutely sure I'm able to save and transfer all my old files and CS5 Creative Suite programs if this indeed happens. I don't trust Time Machine to do it; my boss had this happen and Time Machine did not transfer the Adobe programs. I also don't want to rely on Time Machine and any other file transfer (which all new Macs offer) because I've had brand new computers crash because of old corrupt files from my old computer converting over, and the Apple people said it's a bad idea (which would have been nice to know BEFORE the computer crashed and everything. . .) I've been told you can only use the CD to install CS5 onto your computer twice, which I've already done (thanks to my brand new computer crashing once already). So I would like to know how it's possible to install the program onto a new computer should this one crash, without the use of file transfer or Time Machine. I have no interest in upgrading to CC.
Thanks!Avoid using Time Machine for re-installing Adobe software. It rarely works and usually breaks the activation mechanism.
I've been told you can only use the CD to install CS5 onto your computer twice,
Not quite.
You can install the software as many times as you like but you can only activate the software for use on a maximum of two computers at the same time.
To re-install you will need your CS5 serial number.
Download the installer from Download CS5 products
Install then enter your serial number when prompted. -
Converting time stamp to double
Hello,
I am currently using the write to spreadsheet file.vi to save data.
It looks something like this:
I also want to add the date and time stamp into the saved data but do not know a way of converting a date and time stamp to 'double format'. When the date and time stamp is in teh double format I can easily concatenate the data stream with the 'date and time' in a 2-D array.
Thanks,
NevicaDuplicate post
http://forums.ni.com/t5/LabVIEW/converting-time-stamp-to-double/td-p/1181397
Tim
Johnson Controls
Holland Michigan
Maybe you are looking for
-
Calendar items not showing ONLY in list view on iPhone
Weird: My Calendar items are not showing in the list view only, on iPhone. They show when I search, they show in month, they show in Day views--just NOT in list view. Ideas?
-
Content repository - Multiple unrestricted ordering issue for a property
Hi there, I have a problem in terms of getting the correct ordering for a property that I have defined in the BEA Content Repository. Does anyone know what can be done? Below is a description of what I am doing. I hope someone can help me order the v
-
Oracle 11.5.9 and Crystal reports XI SQL
Greetings, Does anyone know how to use a Crystal parameter in SQL for an Oracle query entered in the Crystal "ADD COMMAND" mode that will prompt for 'multiple periods" We have tried- Where Period_Name IN '{?Periods}' in the Crystal "Command" SQL and
-
Need to add contact with 2 email addresses
I have a contact in my address book for whom I need to add 2 email addresses in the same field. I know I can add multiple addresses, but that gets confusing for this contact, because I need to send every email to him at both addresses. I tried adding
-
Why my preview keeps freezing when I make several underlines in pdf file?
Why my preview keeps freezing when I make several underlines in pdf file? It keeps saving and freezing.