KVM switchs, any problems with MSI boards???

Hi Everybody!!
X-Abit fan here, I have a 2 port Belkin DVI KVM switch. I had trouble with Asus and kvm's so I'm asking ahead of time. I built a couple of MSI boxes in the P3 days and had good experience. I'm glad to here Quality is back as a priority at MSI. Congrats on the #1 spot on Tomshardware 965P round up.
Hope the forums here as lively as the Abit one is.
Thanks for the help??   

some KVM switch has incompatibility issue with some boards. What you have is just by luck they both work together!

Similar Messages

  • Problem with MSI Board and MSI Geforce 4 with Windows XP

    I have a MSI 845E Max(MS-6566E)
                  MSI Geforce 4 - 420
                  Celeron 1.7 gig
                  Soundblaster Live
                  2 Network Cards
                  and the usual stuff.
    I have loaded Windows 98 on my system and it works fine. But then I load Windows XP on and the system starts rebooting. After it reboots my video resets itself and I have to load it back in. I will then reboot and sometimes it will work, sometimes it will not. I try playing a game or even searching the net for awhile, but out of the blue the system will give a very quick blue screen and reboot. And of course when it boots up the video is reset. I loaded all the drivers I could find on MSI's website and used every video driver made by Nvidia and MSI. If I do a Windows XP update to my system the computer will not even boot up. it will just keep rebooting when it is trying to bring up the login screen.  Anyone else run into this with Windows XP?

    My system sometime freezes. Why ???
    P4 1.8A GHz Notrtwood, 256MB PC2700, MSI Geforce 4 TI4400, SB Live 1024
    Check my logs:
    1)
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2002-07-23 20:03:27
    TimeZone: -60 - Central Europe Standard Time
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 108
    Shutdown: 0
    EventFlag: 1
    EventCount: 1
    BreakCount: 1
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: nv4_disp
    DeviceClass: Display
    DeviceDescription: NVIDIA GeForce4 Ti 4400
    HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
    Manufacturer: NVIDIA
    DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0BD6 0006000D 000A0BD6 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: NVIDIA Corporation
    DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 30.30
    DriverFileVersion: 6.13.10.3030
    DriverInternalName: nv_disp.dll
    DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
    DriverOriginalFilename: nv_disp.dll
    DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 30.30
    DriverProductVersion: 6.13.10.3030
    2)
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2002-08-12 18:53:23
    TimeZone: -60 - Central Europe Standard Time
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 235
    Shutdown: 0
    EventCount: 8
    BreakCount: 8
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: nv4_disp
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: NVIDIA GeForce4 Ti 4400
    HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
    Manufacturer: NVIDIA
    DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C0A 0006000D 000A0C0A 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: NVIDIA Corporation
    DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 30.82
    DriverFileVersion: 6.13.10.3082
    DriverInternalName: nv_disp.dll
    DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
    DriverOriginalFilename: nv_disp.dll
    DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 30.82
    DriverProductVersion: 6.13.10.3082
    3)
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2002-09-07 22:22:41
    TimeZone: -60 - Central Europe Standard Time
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 408
    Shutdown: 0
    EventCount: 14
    BreakCount: 14
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: nv4_disp
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: NVIDIA GeForce4 Ti 4400
    HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
    Manufacturer: NVIDIA
    DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0FC9 0006000D 000A0FC9 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: NVIDIA Corporation
    DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 40.41
    DriverFileVersion: 6.13.10.4041
    DriverInternalName: nv_disp.dll
    DriverLegalCopyright: (C) NVIDIA Corporation. All rights reserved.
    DriverOriginalFilename: nv_disp.dll
    DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 40.41
    DriverProductVersion: 6.13.10.4041

  • My phone although fully charged has just switched itself off and won't turn back on again! I'm just coming to the end of a 2 year contract and never had any problems with it. Help please!

    My iPhone 4 although fully charges has just switched itself off and won't turn back on again. I've tried taking the sim card out but nothing happens. I'm just coming to the end of a 2 year contract and never had any problems with it before. Help please.

    Start here
    http://support.apple.com/kb/HT1430

  • Cp1700 - Any problems with switching existing printer with stored printer?

    I am having problems reading the LCD panel for my cp1700 (not all the text shows - common problem). I have another cp1700 that I have had stored for about 5 years (saving for parts. I think this "stored" printer squeaked when printing). I considered switching the LCD panels but it looks as if this is a complicated procedure. So I am wondering if I will encounter any problems with switching the printers? I will be putting in new ink cartridges but wondering if the printheads will cause a problem after being stored for so long?

    This don't completely resolve your concerns, but I've had no trouble printing from OS X 10.7 to an Epson Artisan 810 connected to a Mac running OS X 10.6.8.  I may even have been able to print to it wirelessly, but I can't remember.  Apple issued an update to the Epson printer drivers fairly recently, which one would hope would have addressed any issues.  In any case, I'd make a bootable clone of your Mac before you upgrade.  If things aren't as you hope, then you can restore the clone to your main disk drive and be back with OS X 10.6.

  • Problems with msi p35 neo 2

    Default problems with msi p35 neo 2
        pc works fine when using windows and the net and emails
        only when using 3d mark or games do i ever get problems
        just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
        tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
        now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
        temps on the board (from msi dual core center temps cpu 33oc system 47oc)
        memory voltage 2.1
        any one know the settings for the ram
    more details you need
    System Details
    MotherboardEdit Value
        msi p35 neo2 fr
    Motherboard BIOSEdit Value
        latest
    CPUEdit Value
        core 2 quad 6600
    CPU Overclock SpeedEdit Value
        none
    CPU HeatsinkEdit Value
        standard intel that come with cpu
    CPU Idle TempEdit Value
        N/A
    CPU Load TempEdit Value
        N/A
    MemoryEdit Value
        ******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
    Memory VoltageEdit Value
        N/A
    Video Card(s)Edit Value
        ati hd4870
    Video Card SpeedEdit Value
        N/A
    Sound CardEdit Value
        onboard
    PSUEdit Value
        g7 780 watt power extreme
    Hard Drive(s)Edit Value
        mator dimondmax 21
    Optical Drive(s)Edit Value
        N/A
    Other CoolingEdit Value
        3 80mm fans 1 frount 1 back 1 side
    ModsEdit Value
        N/A
    Operating SystemEdit Value
        windows 7

    Quote
        ******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
       Quote
    memory voltage 2.1
    Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x).  Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800).  The voltage at these settings should not need to exceed 1.95V.  So please lower it accordingly.  In case the freezes still occure, please run memtest86+ to check your memory for errors.
    Quote
    msi dual core center
    Please get rid of that tool for all further tests.  Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

  • Problems With MSI K8N Neo Platinum

    Posting some probems I have face and wondering if you folks have experience similar problems. I bought 2 and bot hahve same problems (sold both of it). Another friend of mine have also same problems with the board.
    1. SATA 1/2 don't work properly. I have detection problems using SATA ports 1/2. The comp will not detect my IDE devices and hang at POST screen. Reboot/reset don't solve the problem. I have to turn off and on to get it to work. Problem is only sovled after switching to SATA 3/4.
    2. Network disconnection problem. The NIC will auto disconnect and reconnect back by itself, esp. when under overclocked conditions.
    3. Cannot overclock much using DIMM slot-1 esp. when mem is over 230MHz. Must change to slot 2/3. Even so, I do face BSOD stating an USB driver is the cause of the issue.
    4. Comp will sometimes unable to reboot at FSB between ~210-240MHz. 250Mz and above seems OK.
    Now, I am using Abit KV8 Pro 1.1 and it works fine though. No FSB reboot issues. I am using 1.1 with latest BIOS, thus not AGP/PCI lock issues. Hope MSI will fix those problems mentioned ASAP cause my Abit don't work with mobile A64s. :(

    Seriously, I have absolutely no idea. It may be a QC problem, it may be a design problem, its may be BIOS or others. The only thing I know that after I jump ship to Abit KV8 Pro 1.1, all these problems are gone. Only problem is that Abit don't support mobile A64s.
    BTe, just another problem or maybe over conservative restrictions. When using DDR333 RAMs, the BIOS will not allow you to manually set it to 400. Thus at 200MHz FSB/HTT, your RAM is stuck at 166MHz. Pretty stupid restriction I have to say.

  • SOLVED - Has anyone had any problems with xorg 1.11.14-1?

    Last night I had a double catastrophe. The first was nothing to do with Linux, but was the result of a rogue drive trashing my sata ports and killing both Arch and Windows. I managed to rescue Windows, but since Arch was running at the time (and updating) nothing I tried could bring it back. After restoring from a backup (10 days old) I started the updates again (a gargantuan 415Mb) which completed, though after a reboot X failed to start. Nothing in the logs, and no activity at all. My usual fix is to remove xorg.conf and reboot, which will generally get me to the desktop to troubleshooting stage using vesa drivers instead of catalyst, but even this couldn't get me to a desktop. I tried removing catalyst altogether from single user mode, but nothing would fix.
    I restored the backup again, and did all updates except kernel, catalyst, and xorg. Everything worked fine, so next I updated catalyst - still working. A fresh backup and I updated the kernel. Still working, which means the only thing not updated at this point (and in my mind the most likely culprit for the failures) is xorg.
    Now I'm not daft enough to try updating before I make a fresh backup (I've remade several tweaks to my system that got lost after the original crash), but before I go to the trouble, I wondered has anyone else had any problems with the updated xorg?
    For info, I'm running on a Phenom X4 965BE, AMD 4670HD with catalyst 12.1, kernel 3.2.2-1.
    TIA
    Last edited by Roken (2012-02-06 00:30:59)

    Any idea where the problem was?
    X also fails to start for me now, when the catalyst driver is loaded. It used to work before, but after recent upgrades and changes to the system it's somehow broken.
    (Same catalyst and xorg versions as you mentioned, but with kernel 3.2.4-1)
    Switching to the open-source radeon driver makes X start fine, switching back to catalyst breaks it again.
    Last edited by sas (2012-02-07 16:02:50)

  • If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content?

    If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
    Cheers.

    You canot easily change your country settings.  The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store.  You are also restricted to waiting 90 days between country changes.
    E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE

  • Workstation specs -- Any problems with this system quote?

    Here are the specs I have been quoted.  I'm not terribly knowledgeable about hardware, does anyone see any problems with this system?  I have recently started shooting and editing weddings, engagements and corporate videos.  I think it may be bit more than I need, but I would much prefer that to less than I need.  Any input from the more tech savvy users would be much appreciated.
    Darren Breckles
    65539
    ASUS Sabertooth X79 ATX LGA2011 DDR3 3PCI-E16 2PCI-E SATA3 USB3.0 SLI CrossFireX Audio Motherboard [Sabertooth X79]
    72374
    Mushkin Enhanced Blackline Frostbyte 32GB 4X8GB PC3-12800 DDR3-1600 CL10 Quad Channel Memory Kit [994055]
    64540
    Noctua NH-D14 SE2011 LGA2011 Heatpipe Cooler w/ NF-P14 140mm & NF-P12 120mm PWM Fans [NH-D14 SE2011] [Reg. $89.99]
    67678
    Intel 520 Series 240GB 2.5in SSD MLC 25nm SATA3 Solid State Disk Flash Drive OEM [SSDSC2CW240A310] [Reg. $279.99]
    4729477
    8 port internal via 2X SFF-8087, LSI2208 1GB cache, 6Gb/s, RAID 0/1/10/5/50/6/60 [RS25DB080]
    1
    84358
    MSI GeForce GTX 770 OC Twin Frozr IV 1098/1150MHZ 2GB 7GHZ GDDR5 2xDVI HDMI DP PCI-E 3.0 Video Card [N770 TF 2GD5/OC] [Reg. $429.99]
    62678
    ASUS BW-12B1ST Blu-Ray Writer 12X BD-R 16X DVD+R SATA Black Retail [BW-12B1ST/BLK/G/AS][Reg. $89.98]
    Environmental Fee $0.75 Per Item
    45275
    Microsoft Windows 7 Professional Edition 64Bit DVD SP1 OEM [FQC-04649] [Reg. $153.98]
    75044
    Fractal Design Define R4 ATX Tower Case Black Pearl 2X5.25 8X3.5INT No PSU Front 2XUSB3.0 Audio [FD-CA-DEF-R4-BL] [Reg. $119.99]
    77641
    Corsair AX860 860W ATX 12V V2.31 80 Plus Platinum Modular Power Supply Active PFC 120mm Fa *IR-$10* [CP-9020044-NA] [Reg. $189.89]
    49665
    nMedia ZE-C118 3.5in Multi Function Panel Flash Card Reader W/USB2.0 eSATA SDHC2.0 Win 7 Black [ZE-C118 ] [Reg. $19.99]
    58276
    StarTech.com 3.5in Hard Drive to 5.25in Front Bay Bracket Adapter [BRACKETFDBK]
    78186
    Noctua NF-A14 FLX 140mm Ultra Quiet Cooling Fan 900-1200RPM 115.5M3/H 19.2DBA 3-PIN [NF-A14 FLX] [Reg. $22.99]
    4
    22823
    Premium PC Assembly and Testing With 1 Year Limited NCIX Warranty (PRE-CONFIG WIN. OS If Purchased)
    Environmental Fee $3.00 Per Item
    Note: Includes extra attention to cabling, lighting installation and extra burn-in period. Recommended for windowed cases. Assembly requires an additional 4-5* business days to ship once all parts are in stock. *typical lead time (currently 2-5 business days)
    1
    $3.00
         73920-1
    NCIX 3 Year On-Site Care Coverage for PC $3000.00 - $3999.99 (22823)
    89510
    Intel Core i7 4930K 6 Core 3.4GHZ (3.9GHZ Turbo) 12MB Hyperthreading LGA2011 Processor No HSF [BX80633i74930K] [Reg. $649.99]
    81958
    Western Digital RE 2TB SATA3 7200RPM 64MB Cache 3.5in Internal Hard Drive [WD2000FYYZ] [Reg. $213.57]
    Environmental Fee $0.75 Per Item
    4

    Very nice build list Darren!
    I would have selected the Samsung 840 Pro 256GB SSD over the Intel 520, and Areca's ARC-1882i over the Intel SAS controller you list, but those are preferences not essential changes.
    Regards,
    Jim

  • Any problems with migrating In Design files from Mac to PC?

    My wife is a commercial artist, and we are considering getting CS4 here at home on our PC.  She has a Mac at work.  Are there any problems with switching files between the Mac and the PC so she can get some work done on the same files at both the office and at home?
    Thanks!

    One recurring problem I have is the different types of the Symbol font. Mac InDesign insists on adding (TT) -- "Symbol (TT)" -- to 'Windows' documents, and vice versa. I think the root of the problem is Symbol on Windows is an OTF font, whereas on the Mac it's still a 'regular' TTF. My Mac compadres tell me it's not easy to transfer the Windows font to the Mac -- its own version apparently being rooted deep inside the system.
    However, it's not a big issue, as we by default encapsulate Symbol with a character style. So when ID alerts us, all we have to do is redefine this style, be it on Windows or on Mac. Fortunately I've never seen text reflowing because of this (knocks on plywood desk).

  • PC MARK 4 Scores with MSI boards

    Hi,
    I was really surprised when I PCmarked my machine, have seen scores like 4765 on a p4 3.0 prescott with one gig on an Epox board rig, 4823 from an Abit, 4829 from biostar... with less ram than I've got.
    MSI PT880
    P4 3.0 Prescott-1:1 2.5 3-3-8 4x512 CorsairVS DDR400-X800pro-on air - 3807
    p4 3.0 at 3.3 -6:5 2.5 3-3-8 - 3887
    p4 3.0 at 3.2 1:1 2.2 3-3-8 - 4102
    Although my PCmarkGraphics scores were tremedious. 21000... is that possible?
    Any one have some scores they could share with MSI boards as a point of comparison?

    i pulled a 4917 running 3.6ghz with stuff running in background im streaming music from my pc to others so if i turned that off probly would jump to over 5000.  And checked my futurmark manager my other speed scores
    3.6Ghz=4917
    3.75Ghz=5449
    3.8Ghz=5495
    best one at
    http://service.futuremark.com/compare?pcm04=2650080

  • ANY PROBLEM WITH N78

    HIIIII guys any problem with N78 pleasr reply me

    please post your questions in the relevant forums only, i.e. see the response to your question here:
    /discussions/board/message?board.id=phones&message.id=46760&jump=true#M46760

  • USB problem with msi (nforce 1)k7d420

    USB problem with msi (nforce 1)k7d420
    i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
    it detects and install the device automaticly but when i want to access it,it just gives me error msg
    windows xp pro service pk1
    nforce nvidia drver v2

    http://www.nforcershq.com/forum/viewtopic.php?t=30003
    may be ive not loaded it yet

  • [Athlon64] Problem with MSI RS480M2-IL

    Hi all,
    I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
    MSI RS480M2-IL
    AMD 64 3000+ Venice E3
    Bios Version 3.8
    Geil PC3200 DDR400 2.5-3-3-6
    Maxtor 60GB HDD 7200RPM 2mb
    Verudium Power Vortex 420W
    Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

    the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
    so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
    in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
    so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
    based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely  hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
    perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem  to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
    one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops) 

  • I am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    i am going to buy unlocked iphone 5.. i will be going to india nxt months and will stay there for a while... so my question is will i get warrenty in india.. and will there be any problem with using indian sims..?? thnx for the help..

    The warranty for the iPhone is not and has never been International.
    Warranty and support are ONLY valid in the country of origin.  The only exception is the EU where the entire EU is treated as one country.
    If the device will be used in India, buy it in India.
    An unlocked iPhone will work on any supported GSM carrier world wide.  The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

Maybe you are looking for