KVM that supports 30 Cinnema

Hi, I have a power macintosh G5 quad with a 30" HD cinnema display, but virtual pc is not cutting it for some applications, so I need to use a KVM switch between my mac and eMachine computer. Any advise to which KVM that will support a 30 HD Cinnema display with full resolution support?

http://www.gefen.com/kvm/product.jsp?prod_id=4322
http://www.gefen.com/kvm/product.jsp?prod_id=2950

Similar Messages

Error. your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.

I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?

Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support

I am getting the error "This movie can be played only on displays that support HDCP" when attempting to play a HD movie from iTunes to my TV. The TV is a Samsung UN46B7000WF w/resolution 1080p

Hello Apple Community,
I am getting the message "THis movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection)." This is the first time I have tried to watch a HD movie that I bought from iTunes from my iMac to my TV. (This is also the first attempt to go from my iMac to my TV.) I have a Samsung LED tv that says it is HDCP compatible with Full HD (1080p) and Native resolution is 1920X1080. I bought a Rocketfish Thunderbolt to/Mini Displayport to HDMI adapter (says support is up to 1920X1200 video resolution) and Mediabridge ULTRA Series HDMI Cable (35 Feet) - High-Speed Supports Ethernet, 3D and Audio Return category 2 certified (supports resolution up to 4K including 1440p, 1080p, 1080i and lower).
I can get the iMac to display on my TV but am guessing that I have not managed the settings correctly in Display for either the iMac or the TV. In addition, I do not have sound yet. Although, the card from Mediabridge says that I need to update my drivers. Any help/advice with the settings for iMac to TV to watch in HD and adding HDMI drivers would be greatly appreciated.
Thank you in advance for your assistance.
Sincerely,
Lisa

Hello All,
I have figured out the sound issue: System Preferences>Sound and choose the TV for output.
Regards,
Lisa

How do I switch to 'fly by' view in iOS 6 Maps in cities that support it?

Curious how to switch to this fly by mode in cities that support it in the new Maps app.
Thanks
Harry

Add your own review to those already there complaining about this:
https://itunes.apple.com/us/book/big-nate-makes-a-splash/id651440000?mt=11
You could also try asking for a refund via the "report a problem" link on your receipt.

Looking for a client/server that supports multiple protocol and delivery

Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I need

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

I am looking for a text to speech app that supports the Books App?

I am looking for a text to speech app that supports the Books App?

If Settings -> General -> Accessibility -> VoiceOver does not work, then it is unlikely iBooks will do text to speach on its own in the current version.
<http://www.apple.com/feedback>
I know that some competing services, Kindle, Nook, etc... are restricted in doing text to speach by the book publishers.
If this is text in a PDF (not an ebook), then maybe there is another app that can to text to speach on PDFs.
If it is published books that are of interest, there is Audible.com <http://www.audible.com/>
In theory it should be possible to use the Mac OS X Text to Speach facilities to convert a document into an audio file, and they sync that to the iPod Touch. I assume there is similar text to speach utilities for Windows systems.
I'm also guessing that there are web sites dedicated to assisting sight impaired individuals that might provide ideas for getting text to speach options for the iPod Touch.

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

XML SAX parser that support LexicalHandler

Hello,
I'm looking for an XML SAX parser that support a LexicalHandler.
I have xml files that are not well formed, ie: (&, <, >, etc...) characters within tags and I need to ignore them.
Anyone have a link to some opensource library ??
Thanks,
Samir

Don't waste your time. Using a LexicalHandler isn't going to help with parsing malformed XML. You should get the person who produced those files to replace them with correct XML.
PC²

IPod Touch 2nd Gen can stream Youtube but cannot stream Apps that supports Online Streaming , it just kicks itself out of the app

iPod Touch 2nd Gen can stream Youtube but cannot stream Apps that supports Online Video Streaming , it just kicks itself out of the app.
It used to be able to stream apps that supports Online Video Streaming , tried Restore a couple of times and it didn't help .
What could the issue be ?

The ESPN Radio is basically a Paid radio station.Make sure you have enuff balance to stream a radio from your Iphone. .
Check if you required to open any ports on your router for ESPN Radio.

Small, cheap NAS box that supports nfs/rsync/ssh ?

Hi all,
for my personal backup needs, I'm looking for a standalone NAS box ("networked hard disk/raid solution"). I need to have support for at least one of rsync/nfs/ssh. (smb/ftp is not enough for me)
It shouldn't be too big (eg not the size of a regular pc.) and it shouldn't cost more then 350 euro or so without disks.
If I can mount one or two sata 1TB disks I'm happy.
Bonus points for solutions where I have total control over the "OS" on it, where the hardware platform exists of standardized easily replacable parts and if it's powerfull enough to do encryption. (I'm prepared to throw in extra cash for these features)
I guess my options are:
1) a product that supports what I want out of the box. I couldn't find that (unless ridiculously expensive, eg 500 euro or more without disks)
2) a product that *almost* does what I want, but where you can install a small Linux distro/freenas over the original firmware so you can do what you want. Basically any appliance (be it a storage device, embedded platforms, network equipment, ...) that can host hard disks and where you can overwrite the OS is worth looking into.
3) building something myself. I've seen some really small motherboards based on Atom cpu's, or even embedded stuff can be enough (something like soekris, pc-engines, etc). But it needs 2 sata ports then, I need to find a housing, a psu, etc. SFF-pc's such as shuttle's etc can also be good options
Any tips, pointers, ideas ?
Thanks
UPDATE:
Here is a list of some devices/urls/thoughts/questions I'm working on. Work in progress! I'll update.
Interesting url's
http://www.hardware.info/nl-NL/productd … S_devices/ off-the-shelf-nas
http://www.mini-itx.com/ all stuff mini-ITX
http://www.epiacenter.com all stuff epia
http://www.logicsupply.com/ mini-itx and SFF resource
http://www.logicsupply.com/matrix/mainboard mainboard matrix
http://www.mini-itx.com/reviews/atoms/ review of 5 Atom mini-itx boards with power comparison between the 2 intel chipsets
http://resources.mini-box.com/online/po … lator.html power calculator (not prepared for Atom though)
http://forums.vr-zone.com/showthread.php?t=275906 power comparison atom vs C2D
Chipsets
TDP's taken from http://download.intel.com/design/proces … 309219.pdf page 399, http://ark.intel.com/chipset.aspx?familyID=28994
type - TDP - usage - url
945 GM /GME express - 7 - used with atoms? - http://www.intel.com/products/notebook/ … erview.htm
945 GMS/GSE express - 6 - used on some atom boards who are not available yet (eg the MSI 9830/9832) - http://www.intel.com/design/chipsets/em … /index.htm
945 GC - 22.2 - used on nearly all current atom boards - http://ark.intel.com/chipset.aspx?familyID=28994
945 PM express - 6 - ?
943 GML express - 7 - ?
940 GML express - 7 - ?
945 GT express - 15 - ?
ultra mobile 945GU express - 5 - ?
G45 - 24 - "rich media" socket 775 boards - http://www.intel.com/Assets/PDF/designguide/319972.pdf
Q45 - 17 - "business" socket 775 boards - http://www.intel.com/Assets/PDF/designguide/319972.pdf
P45 - 22 - ?? - http://www.intel.com/Assets/PDF/designguide/319972.pdf
TDP's of complete systems
type - TDP idle - TDP loaded cpu - TDP loaded cpu+video - source url
945 GSE setup without HDD - 15 - 17 - ? - http://www.mini-itx.com/reviews/atoms/
945 GC setup without HDD - 25 - 27 - ? - http://www.mini-itx.com/reviews/atoms/
945 GC (and ich7) full setup - 27 - 31 - 38 - http://www.silentpcreview.com/article865-page5.html
G45 Express + C2D E6400 65nm full setup - 49 - 97 - 98 - http://www.silentpcreview.com/article869-page5.html
G45 Express + C2D E7200 45nm full setup - 35 - 64 - 65 - http://www.silentpcreview.com/article869-page5.html
Off-the-shelf NAS
* LaCie Ethernet Disk mini: needs to connect to internet to activate? or is this only for the remote feature? can you run custom OS on it?
* ximeta ndas seems to need special/proprietary drivers/calls to be able to use it?
* linksys nas200
seems pretty customizable. some 3rd party firmwares
http://www.linksysinfo.org/forums/showt … hp?t=60232
http://www.nslu2-linux.org/wiki/NAS200/Hardware
http://www.iomega-europe.com/section?SI … ecid=40380 (nslu2 firmwares)
slow: 3MB/s over 100Mbps
slower then dlink and qnap. see http://www.trustedreviews.com/networkin … -NAS200/p2
* intel SS4000E or something?
* qnap ts-509 or other qnap?
http://www.qnap.com/pro_detail_feature.asp?p_id=86 -> 480euro
http://www.qnap.com/pro_detail_feature.asp?p_id=104 -> 800 euro
* iomega storcenter
* netgear readynas: they have decent pricy ones who are big and consuming as much as an atom based server or something.
they also have smaller ones.:
2disk 310euro
4disk -> 1000 euro
http://www.netgear.nl/producten/product … od=RND2150 -> 300 euro
6disk http://www.netgear.nl/producten/product … d=RNDP6610 -> runs on an intel C2D -> 1500euro
* dlink
* thermaltake muse looks pretty cool http://www.xpcgear.com/n0001lnu.html 390 euro http://tweakers.net/pricewatch/149904/t … -wit).html
* synology has lots of stuff. eg http://www.synology.com/enu/products/CS407/index.php
http://www.synology.com/enu/products/DS207+/index.php -> 285 euro
http://www.synology.com/enu/products/DS408/index.php -> 510+ euro
http://www.synology.com/enu/products/DS508/index.php -> 800+ euro
* hp
http://www.hp.com/united-states/campaig … martserver
DIY-style (TODO: look up motherboards, enclosures, etc) miniITX, arm, via, intel atom,...
* info/tutorials
** http://blogs.sun.com/paulie/entry/zfs_n … _the_intel
** http://www.mashie.org/casemods/udat2.html (note: the 5disks into 3 bays thing is discontinued)
* complete boxes/barebones:
** Asus eeebox: perfect except that it can only contain 1 disk, of the format of 2.5"
** http://www.norcotek.com/DS-520.php 5x hotswap sata. Celeron, 2x Gbps,... looks great although very hard to get in EU apparently + you're bound to custom motherboard etc
** Shuttle XPC X27D dualcore atom, 1x 2.5 hdd. but 645GC http://loveno.be/product/16866
* motherboard/cpu combos
** http://www.via.com.tw/en/products/mainb … ard_id=610 Via C7 1.5Ghz, 4-8x sata, padlock engine, via gigabit controller. CF and miniPCI slot, 1xddr2
** http://www.intel.com/Products/Desktop/M … erview.htm . Atom 230 1.6Ghz. 1x IDE, 2x sata. only 100Mbit/s, 1x PCI, 1xddr2
** MSI MS-9830. fanless. 2x Gigabit. 2x sata. available yet?
** MSI MS-9832. http://www.logicsupply.com/products/ms_9832 2x Gbps, 4x sata. 1x ata. expected 1/20/2008
** Intel D945GCLF2 -> like D945GCLF, but dualcore,Gigabit.
** Intel DG45FC http://www.intel.com/Products/Desktop/M … erview.htm socket775, 4x sata, 2x Gbps,... -> based on intel G45 "media center" chip (eg more media features), but same price as DQ45EK !
** Intel DQ45EK http://support.intel.com/Products/Deskt … erview.htm socket775, 4xsata,Gigabit. -> based on intel Q45 "business" chip. perfect for the chenbro case, except no 5th sata (unless i loop the esata back in) or ide for the 5th 2.5" disk
** http://www.asus.com/products.aspx?l1=3& … odelmenu=1 Similar, but more media-features and 6x sata
** Jetway J7F4K1G5D-PB. Via C7. 2X Gbps, 2x sata 150, 1x ata 100
** Epia SN xx -> various epia boards with 4x sataII
* cases
** http://usa.chenbro.com/corporatesite/pr … ?serno=100 (nice mini ITX server case with 4x hotswap bays and PSU) (just make sure you have good AHCI suppport) 170euro
** http://www.xpcgear.com/pcv350b.html Lian-Li PC-V350B , 2x 5,5", 2x 3.5", microATX
Notes
* I heard via Epia is rather expensive especially for it's quite low performance
* Via nano might be a good platform (must google more for this, stable?)
* There are no Atom boards with more then 2 sata ports. (the msi's still are to be expected)
* Taking an intel board with a slow celeron / amd with sempron can be an option, it will be fast , stable and not expensive. I'm told it wouldn't pull too much power either. (although more then atom/epia)
* "ready-to-go" SFF-pc's/barebones can be found in the <300 euro price range, making this a good target for a simple 1/2-disk NAS
* AHCI problems with AMD/ATI RS400-200, RS480 HBA and Nvidia nForce 560. see http://en.wikipedia.org/wiki/Advanced_H … _Interface
* An intel G45/Q45-based system would be sweet, they have
- http://en.wikipedia.org/wiki/List_of_In … _Factor.29
- http://en.wikipedia.org/wiki/List_of_In … C_45_nm.29
with very low TDP, but they don't fit in socket 775
Last edited by Dieter@be (2009-01-30 10:11:53)

deadrabbit wrote:I recently bought an MSI Wind desktop, with pretty much the same thing in mind. I ended deciding against a NAS enclosure, since I wanted to be able to install a conventional Linux distro, and have complete control over it. The Wind is cheap, and all the hardware is Linux compatible (http://www.newegg.com/Product/Product.a … 6856167032). I ended up installing the OS on a CompactFlash card, so the hard drive would have to run constantly. As a result, it's nice and quite, uses little power, and the OS on the CF card is automatically backed up to the hard drive. I wrote up a detailed description of the project here: http://rockhoppernotes.blogspot.com/200 … sktop.html.
Thanks, looks quite good.
Except one thing: the 945GC chipset has a TDP of 22.2W.. that's stupid imo, and defeats the whole purpose of a low-tdp cpu such as the Atom. Right now I'm still doubting between waiting for an Atom board based on the 945GM(S)/945GSE chip (TDP 6Watt) (eeebox has that one, some MSI mini-ITX boards should be available in january) or going for a socket775 board with an intel core2 45nm cpu, which would consume not much more then Atom+ 945GC chipset (when idle, loaded is much more but I don't plan to load it ).
Nvidia is also working on an Atom chipset but I don't think I'll wait for that.

Is it possible to add a barcode image generator API on HTMLDB that support

Hi All,
Currently we create Barcodes images using a Java solution - open source API called Barbeque.barcode.servlet. Is it possible to add a barcode image generator API on HTMLDB that support multiple formats?
Our current process:
All jobs created in our system require a barcode which is then printed onto a cover sheet for each job (refer example). We also currently have individual barcodes printed on a single feed barcode printer for attaching to jobs sheets. We also print A4 sheets of barcodes with the Field Technican id number on that we sent out to them.
Thanks in advacne
Manoj

It certainly is possible to call Java from PL/SQL and so therefore from APEX.
The process is fairly well documented online and there's a well cited example of calling Apache FOP within these forums.
You may however need to do a little work to wrap your Java library using static methods in order to do this.
Regards
Ben

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe

What is the last version of the Apple OS that supports Eudora and Quake III? (I'm at 10.4.11)

Hi There,
I am having vertical line issues with my G4 PowerMac Quicksilver (April 2002).. Red or purple lines and sometimes they connect to the pointer arrow.
I thought it was the graphics card but when I ran the Apple Hardware Test Disk version 1.2.5 it failed at the Logic board, although it's an after market Logic board because one of my (2) 1 gig processors died a few years back so I don't know if the hardware test disk is still valid with an after market Logic board?
Also What is the last version of the Apple OS that supports Eudora 6.2.4 and Quake III? (I'm at 10.4.11)
Thanks for any and all help, I think my time is limited in my old Mac..
Eric

Hi-
I'd strongly recommend replacing the thermal compound on the Radeon 9800 Pro. It could very easily be a simple matter of lack of cooling which is causing your issue.
I have a tutorial here:
C874D84E-96DD-4DFF-9566-7C66BE065BB5.html
16196A0F-952B-47ED-A9F9-91F7B0ECA431.html
Use Arctic cooling MX-4 compound.
As for drivers or ROM updates, if the card is a flashed one, don't bother with the firmware. All ROMs are the latest firmware.
In Tiger, there is a retail driver update that you can try:
http://support.amd.com/us/gpudownload/Pages/jan2005updater.aspx
No updates needed for Leopard.
Eudora should be fine:
http://lowendmac.com/misc/10mr/mb0910.html#1
Quake is fine. This coincides with my observations:
http://www.insidemacgames.com/forum/index.php?showtopic=31884

Where can I find an older version of Firefox that supports Proxy Mobile- and yes, gain access to Tor. Orweb is just kind of, meh

The Guardian Project recommends using Orweb or Firefox with Orbot when using Tor,but your upgrade will no longer install Proxy Mobile- I need an older version of Firefox Mobile that supports Proxy Mobile.

Hello kc9agz,
Thank you for contacting Mozilla Support. Did you back up your bookmarks before you moved to the new computer? You can find more information about backing up and restoring bookmarks in this article.
[[Restore bookmarks from backup or move them to another computer]]
Please let us know if this solves your issue.
Cheers,
Patrick

Im running a mac air with osx 10.9.2 and i tried installing a legal version of windows 7 OEM but it tells me that support drivers are missing so i have to cancel installation and do the option cmd p r to get it to boot.

when i use boot campcamp it gets to installing then it tells me that support files are missing. how can i install w7 in boot camp on a make air osx 10.9.2 i am using a iso win 7 sp1 image and the copy is legal. it get stuck on saying it cant find support drivers. I dont like windows 8 and would rather use w7 (i dont like windows at all but need it for using VB for a class at school) can i install a linux version like scientific instead of windows ? if i can ill just buy a cheap PC to use VB on

i have a usb super drive can i use that instead ? i dont have another usb stick and the one i have has 27G of data on it and tranfering it takes time. I can buy one if thats the only way to do it on a mac air but i figure i have the super drive and could put the w7 support files on it and i have the w7 on disk and iso img saved on the mac.
BTW
Thank you for helping me. I know it can be a pain in the butt helping people when the tasks seems so straight forward. I really appriciate your time

KVM that supports 30 Cinnema

Similar Messages

Maybe you are looking for