Kyocera Brigadier as mass storage

I want to connect my kyocera to my mac as a mass storage device. It explains it here: USB Mass Storage Brigadier by Kyocera | Verizon Wireless
However, the "mass storage mode" option isn't visible on the phone when I connect it. The other three options are. I see that macs require the "android file transfer" app in OSX, but does that mean I can't mount it at all?

You need to install the Android File Transfer application for Mac in order to get the mass storage functionality on your Mac.

Similar Messages

  • Kyocera Brigadier as mass storage connecting to Debian Linux

    Hi all. I have a new Kyocera Brigadier but I can't get it to transfer files using Debian. The phone is running Android 4.4.2 and I'm using Debian Wheezy 64bit current. I set the android to Media Sync Mode but I can't find it as a device. If I don't set it to Media Sync Mode, then it registers as a CDRom but I can only see a few system folders (looking into the ISO), not anywhere to put my music files. Thoughts?
    Here is a dmesg http://paste.debian.net/163512/
    https://www.verizonwireless.com/support/knowledge-base-106426/ My phone, but I don't have the Mass Storage option.
    Why is it difficult to transfer files when Android is Linux-based? I've never had a problem like this before. I've had an ADP1 and an Android X2 before and this never happened until now.
    I found this thread Kyocera Brigadier as mass storage but that was for Mac.
    Thanks!

    You need to install the Android File Transfer application for Mac in order to get the mass storage functionality on your Mac.

  • Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

    Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

    Or If there is any purchased music then you can try to transfer purchases
    http://support.apple.com/kb/ht1848
    If you're in the US you can reload purchased music
    http://support.apple.com/kb/ht2519

  • Time Capsule vs. Other Mass Storage Device

    I am a Mac newby seeking advice.  I recently purchased the MBA below to replace my personal PC.  My previous setup was a desktop with plenty of storage to handle my needs (including iTunes) and I backed up data directly to an external hard drive (I know pretty basic).
    After purchasing the MBA, I realized I do not have enough internal hard drive space to store all of my music and my current external drive is too small for all the media and backup of the MBA.  Also, the point of the MBA is to be mobile. Also, I would like my Sonos music system (with an application similar to iTunes) to be able to access the music library.  Lastly, I have far to many songs purchase outside of iTunes to use iTunes Match.  Therefore, I started seeking wireless alternatives to store my music and backup my MBA.  Although an NAS would probably be ideal, I have found out through trial and error that the basic systems do not work with a MAC and the only ones with a prayer are the more expensive ones (i.e. Synology and QNAPS).  Therefore, I have decided to pursue a more simplified approach.
    My Internet and TV provider is CenturyLink.  Their router is very basic with only 802.11g speed and without any USB ports.  The following configuration has been suggested to my by some more experienced Apple users to provide wireless data access and backup.
    Requesting CenturyLink provide me with a basic modem.
    Purchasing an Airport Extreme (or similar wireless n router with a USB port).
    Connecting the Airport Extreme (or other wireless router) to the basic modem.
    Purchasing a Time Capsule (or other mass storage device).
    Partitioning it using either the specific one for the Time Capsule (or Disk Utility for other mass storage devices) to provide one volume for my media and one for backup using Time Machine.
    Moving the media from my old external drive (which is catalogued with folders for each artist, subfolders for each album and the songs in the subfolders) by connecting the old mass storage device and Time Machine to my MBA and using Finder to do this (see the questions below regarding this).
    Moving/cataloging the media from the Time Capsule (or other mass storage device) by dragging it into the iTunes window.
    Connecting the Time Capsule (or other mass storage device) to the USB port of the Airport Extreme (or other wireless router).
    Setting up Time Machine to use the volume partitioned for backups.
    Possibly having to move cataloging files from my iTunes, Music folder to the external drive and pointing iTunes to the Time Capsule (or other mass storage device) through Preferences, Advanced to access the music.
    Overall, I am concerned with the total cost.  I just spent a lot of money, not only purchasing the MBA, but also the iPad 3 and upgrading my cell phone to the iPhone 5 (I skipped the 4).  It seems that by the time I purchase an Airport Extreme and a Time Capsule, I could also have just bought a NAS like the Synology 213 with 2 X 1TB drives, connect it to the existing wireless router via ethernet connections and have a more comprehensive solution.  Based upon these instructions and cost concerns (and bad experience), I have several questions related to this.
    Does this configuration and these instructions make sense, including those for moving and accessing my music files through iTunes (i.e. will it work)?
    Are both the Airport Extreme and Time Capsule necessary to make this work easily or can I purchase alternatives to either or each and if so, what is recommended?  If they are necessary, would you recommend doing this or buying one of the aforementioned NAS's to a Mac newby?
    Given the file structure for my music on the old external mass storage drive, can I simply move the folders over with the subfolders containing the musice files in them or do I have to literally enter into each subfolder, select all and move them subfolder by subfolder (i.e. album by album)?
    Am I missing something totally better and easier solution?
    I would be massively grateful to anyone who can provide some good answers, advice and guidance.  I am about to pull my hair out!!!!
    Thanks,
    WinoSkiBoy

    They both said about the same thing except the Apple Store business tech said to buy an Airport Extreme and just attach a partitioned external third party HDD to it.
    Except that is flakey for TM backup..
    http://pondini.org/TM/Airport.html
    And slow as the proverbial dog.. although I guess the dog is old.
    And totally inadequate as a media store or server.
    Apple's pricing is pretty cunning.. I really doubt you are going to find a cheaper unit to do both wireless and TM backups than the TC. And it is a perfectly good device to do that. It is good to have in the network. And Apple sure make their products work with other apple products.. so it does work better than other similar cost products.. although you miss a lot of features that Apple predecided for you.
    But I don't think anyone has the ideal solution to your problem. Apple believe in cloud. And if you have fibre internet that will work really well.. forks out your money and apple will store your stuff. But for the real world most of us do not have internet connection even a fraction of speed required. And it can be another decade before we will. We need a box that is half way between a TC and media PC, a file store and a NAS. Will Apple make one.. ?? I don't think so.. They believe in cloud..
    You can make the missing link one yourself. If you are so inclined.. A HP microserver running freeNAS can do TM backups and makes an excellent media store because it can do AFP. You can put a graphics card in it and plug it into your TV. You can use it with a airport extreme. But you will need a degree in Geek.. !! The synology is a preconfigured form of that.. No Geekdom required. Synology seems to have the upper hand.. this week.
    Let me make a suggestion.. Figure out if you are going to jump into the Apple way of doing stuff.. which is basically itunes on computer as a server.. and the whole network.. working as part of this.. so any media is pushed from a store in itunes.. whether local or internet..  if you want to do it that way.. getting something other than the air to run itunes is well worth it. That is what a NAS cannot do.. it cannot be a media player.
    Or you do hybrid.. ie you don't use put all your media into itunes, you use a bit of this and bit of something else.. As long as that can play files.. stored on NAS or even on the TC without the itunes requirement.. It won't be as pretty. But it isn't hard to get working.. as long as you accept this isn't going to be the perfect Apple solution.

  • PCI USB Card Does NOT Work With Mass Storage Devices

    I have a StarTech PCI card with 6 USB 2.0 ports that I inserted in my 500 MHz (overclocked) B&W Power Mac G3. It works great for any USB device EXCEPT for any hard drive or DVD/CD-RW drive. I checked the system.log file for errors. Nothing shows up in System Profiler or Disk Utility, obviously. Here's what it consistently says:
    Dec 16 23:33:28 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 674.997 [0xf9c000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 6 of hub @ location: 0x62000000)
    Dec 16 23:33:33 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 679.977 [0xf9c000] The IOUSBFamily was not able to enumerate a device.
    I'm running the latest version of Mac OS X Tiger 10.4.3. What is wrong? StarTech doesn't have a driver, but nothing should be necessary. Is there a 3rd party USB Mass Storage Device driver that might work better than the Apple generic driver? PLEASE HELP ME! I cannot live with USB 1.1.

    Some users have reported problems with certain brand cards and their controller chipsets, so trying a different card may resolve the problem. Keyspan and Macally are often mentioned as being more "Mac-friendly" than some other lessser-known brands or generic cards. Does the card have a mini-power port to supplement the power requirements? With USB 2.0, each port is on a separate bus, so a card with six ports should have one. To minimize the overall draw on the available power, I prefer to install USB cards with as few ports as are needed.

  • Nokia C5-03 and Mac OSX Lion - Problems copying files to phone in Mass Storage mode

    Whenever I try to load more than one file from my iMac (early 2008, OSX Lion 10.7.2) to my new Nokia C5-03 in Mass Storage mode —since the files are MP3s and Multimedia Transfer doesn’t seem to work at all, I keep on getting asked which transfer mode I want to activate for several times, I always choose Mass Storage, and then the first file starts copying, but when it ends with the first one I have to wait for ±30s only to get asked the same again and again until the second file starts copying, and so on.
    It’s driving me crazy, I’ve tried setting in the USB connectivity options not to ask me for the mode when I connect the phone, but it doesn’t work either. It still goes very slow and a lot of “USB Mass Storage transfer mode activated” messages appear.
    I’ve tested it with a friend’s C5-03 and it’s still the same, but when connecting them to a Windows computer everything goes great and fast. Has somebody had this problem before? Is there a solution to this? I don’t know if this is the correct board to post this, sorry if it’s not.
    Thanks in advance.
    PS: Sorry if there are any mistakes or my English sounds weird, i’m Spanish.

    Hi,
    Can you try the suggestions below?
    -Go to Add/Remove Programs in Control Panel (called Programs
    and Features in Microsoft Windows 7).
    Select Nokia Ovi Suite in the list of applications and click
    Change/Remove.
    In the dialog that appears, choose Repair.
    - Click Nokia Connectivity Cable Driver and repair
    -Try creating the connection between your phone and computer
    totally from scratch. Start by disconnecting your phone. In
    Nokia Ovi Suite, select Tools > Options > My devices. Select
    your phone at the top of the window and click Remove this
    device.
    Then, select Tools > Add new device, and follow the
    instructions to reconnect the phone. 
    If this doesn't solve the problem,
    -Uninstall the following programs withAdd/Remove Programs in
    Control Panel (called Programs and Features in Microsoft
    Windows 7):
    Nokia Connectivity Cable Driver
    Nokia Ovi Suite
    PC Connectivity Solution
    Then, download and install the latest version of Nokia Ovi
    I hope this helps.
    Br
    Mahayv

  • Mass storage issues (does not play in car on home stereo) after upgrading to V4.5

    I am having issues with Mass Storage after upgrading my 8130 to V4.5.  I can no longe hook the device to my home stereo or car stereo to play music. My computer does read the device.  It is not my media card.  I still have my old blackberry: the card shows up on both phones and computers.  It is not my cables as they work with my old phone.  I have also done all the obvious things like pull the battery and play with the media card setting
    This guy had the same issue though i never saw resolution:
    Any idea is appreciated! After upgrading the device software to version 4.5 earlier this week (BlackBerry 8800 with v4.5.0.69 (platform 2.7.0.72)) as proposed by T-Mobile and RIM Germany something has changed with the behaviour when connecting via USB as a mass storage device:
    Using a micro-SD card with 2 GB for some months now as a storage for MP3-Files which can be played with my Blue&Me system in my car. This is some kind of Microsoft Windows mobile platform (Automotive) providing playback of MP3-files etc connected via USB. This was never a problem with the previous software. It behaved as it should. Here is an example of what it previously did (taken from http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...):
    "On your Blackberry device, you may or may not first see a message about insufficient current. It just means you can't charge your Blackberry with that PC USB port. Hit the escape key once (on your Blackberry device). You will be prompted a question : do you want to activate USB Mass Storage Mode. You can answer YES or NO. Answer YES."
    The message about insufficient current is important here because the Blue&Me system does not provide the current as proposed by USB-standards. Anyway after clicking this message/warning away the Blue&Me would recognize the mass storage and start playback.
    After upgrading to v4.5 there is no warning about current any more and the mass storage can't be recognized. I've checked both components: The B&M works fine with any other USB-devices connected, and the BB works fine with Windows after connecting via USB (presumably because there is enough current!). All standard settings in Options/Media card for enabling mass storage have been tested but without success.
    Hopefully someone whose genius far exceeds mine will help me with this.  Thank You.

    I have exactly the same issue with my car stereo equiped with USB and my 8130 device. OS 4.3 works fine (and displays the "insuficcient current" message) and after upgrading to 4.5 mass storage mode not works anymore. And of course it works with regular desktop/notebook computers. I've made many experiments with different storage cards (now I use SDHC 8G from SanDisk). The card works fine if I attach it through card reader in my car, it even see multiple drives which cardreader creates.
    Even more I wrote the small blackberry application in java (i'am professional programmer) and ordered BB keys for $20 to deploy it to device. The program uses the RIM api call Device.requestStorageMode() which in my opinion should turn on storage mode of device. But the result was the same - car audio don't see the mass storage with OS 4.5.
    Interesting fact that in OS 4.3 the message about "insufficient current" appears BUT the device CHARGES via this USB without a problem. The same case with OS 4.5 - charging device is possible.
    Also, I can't switch to OS 4.3 because it have the serious problem with bluethooth connections - it suddenly lost my handsfree link and its very bad if I get incomming call during driving and my handsfree not work.
    Forgot to mention - now I have the OS 4.5.0.127
    Michael.
    Message Edited by djm132 on 04-09-2009 01:01 PM

  • Can I use iCloud like a mass storage device - pc free

    I am living on a boat and I am using my iPad w a camera connector kit. Can I back up photos that won't all fit on my iPads internal memory(16G), using iCloud like an external hard drive?  I don't have a pc w me and don't want one.

    With iCloud and photo stream your photos are automatically syced to the cloud, but the photos will only stay in the cloud for 30 days which is enough time by Apple's standards to download them from the cloud to a mac or pc so I guess the answer to your question would be no, you cant use iCloud as a mass storage device.

  • [Solved] Banshee crashes while scanning USB Mass Storage mounted SGS2

    I start banshee and then connect my Samsung Galaxy S2 as mass storage. It shows up in Banshee and Banshee starts to scan the folders for files, but at some point it suddenly crashes.
    Any idea what is causing the problem here?
    Systemd log and Banshee log is below.
    EDIT: As it seems, this was a general error of the FS of the SD card. I had to format it, which is unfortunate, but it works again. 
    journalctl
    Oct 15 14:35:03 thomas-laptop kernel: usb 2-1.3: >can't set config #1, error -110
    Oct 15 14:35:03 thomas-laptop systemd-udevd[6129]: inotify_add_watch(7, /dev/sdf, 10) failed: No such file or directory
    Oct 15 14:35:03 thomas-laptop systemd-udevd[6130]: inotify_add_watch(7, /dev/sde, 10) failed: No such file or directory
    Oct 15 14:35:03 thomas-laptop udisksd[994]: Cleaning up mount point /run/media/thomas/0148-1EE4 (device 8:80 no longer exist)
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sdf): FAT read failed (blocknr 5959)
    Oct 15 14:35:03 thomas-laptop kernel: Buffer I/O error on device sdf, logical block 48668673
    Oct 15 14:35:03 thomas-laptop kernel: lost page write due to I/O error on sdf
    Oct 15 14:35:03 thomas-laptop kernel: Buffer I/O error on device sdf, logical block 48668674
    Oct 15 14:35:03 thomas-laptop kernel: lost page write due to I/O error on sdf
    Oct 15 14:35:03 thomas-laptop kernel: Buffer I/O error on device sdf, logical block 48668675
    Oct 15 14:35:03 thomas-laptop kernel: lost page write due to I/O error on sdf
    Oct 15 14:35:03 thomas-laptop mtp-probe[6147]: checking bus 2, device 14: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-1/2-1.3"
    Oct 15 14:35:03 thomas-laptop mtp-probe[6147]: bus: 2, device: 14 was not an MTP device
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5924) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5925) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5926) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5927) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5928) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5929) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5930) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5931) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5932) failed
    Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5933) failed
    Banshee log
    [Warn 14:35:03.278] Caught an exception - GLib.GException: Datei oder Verzeichnis nicht gefunden (in `gio-sharp')
    at GLib.FileAdapter.EnumerateChildren (System.String attributes, FileQueryInfoFlags flags, GLib.Cancellable cancellable) [0x00000] in <filename unknown>:0
    at Banshee.IO.Gio.Directory+<GetFiles>c__Iterator6.MoveNext () [0x00000] in <filename unknown>:0
    at Banshee.Dap.MassStorage.MassStorageSource+<>c__Iterator0.MoveNext () [0x00000] in <filename unknown>:0
    at Banshee.Dap.MassStorage.MassStorageSource.SyncPlaylists () [0x00000] in <filename unknown>:0
    at Banshee.Dap.DapSource.Flush () [0x00000] in <filename unknown>:0
    at Banshee.Dap.DapSource.Dispose () [0x00000] in <filename unknown>:0
    at Banshee.Dap.DapService.UnmapDevice (System.String uuid) [0x00000] in <filename unknown>:0
    [Warn 14:35:03.279] Caught an exception - GLib.GException: Keine Berechtigung (in `gio-sharp')
    at GLib.FileAdapter.EnumerateChildren (System.String attributes, FileQueryInfoFlags flags, GLib.Cancellable cancellable) [0x00000] in <filename unknown>:0
    at Banshee.IO.Gio.Directory+<GetFiles>c__Iterator6.MoveNext () [0x00000] in <filename unknown>:0
    at Banshee.Dap.MassStorage.MassStorageSource+<>c__Iterator0.MoveNext () [0x00000] in <filename unknown>:0
    at Banshee.Dap.MassStorage.MassStorageSource.SyncPlaylists () [0x00000] in <filename unknown>:0
    at Banshee.Dap.DapSource.Flush () [0x00000] in <filename unknown>:0
    at Banshee.Dap.DapSource.Dispose () [0x00000] in <filename unknown>:0
    at Banshee.Dap.DapService.UnmapDevice (System.String uuid) [0x00000] in <filename unknown>:0
    Unhandled Exception: GLib.GException: Datei oder Verzeichnis nicht gefunden
    at GLib.FileAdapter.EnumerateChildren (System.String attributes, FileQueryInfoFlags flags, GLib.Cancellable cancellable) [0x00000] in <filename unknown>:0
    at Banshee.IO.Gio.Directory+<GetFiles>c__Iterator6.MoveNext () [0x00000] in <filename unknown>:0
    at Banshee.Dap.MassStorage.MassStorageSource+<>c__Iterator0.MoveNext () [0x00000] in <filename unknown>:0
    at Banshee.Dap.MassStorage.MassStorageSource.OnImportFinished (System.Object o, System.EventArgs args) [0x00000] in <filename unknown>:0
    at Hyena.Collections.QueuePipeline`1[System.String].OnFinished () [0x00000] in <filename unknown>:0
    at Banshee.Collection.ImportManager.OnFinished () [0x00000] in <filename unknown>:0
    at Banshee.Collection.Database.DatabaseImportManager.OnFinished () [0x00000] in <filename unknown>:0
    at Hyena.Collections.QueuePipeline`1[System.String].OnElementFinished (System.Object o, System.EventArgs args) [0x00000] in <filename unknown>:0
    at Hyena.Collections.QueuePipelineElement`1[System.String].OnFinished () [0x00000] in <filename unknown>:0
    at Hyena.Collections.QueuePipelineElement`1[System.String].Processor (System.Object state) [0x00000] in <filename unknown>:0
    Last edited by slosd (2012-10-15 14:50:03)

    Hello, i too have random freeze without any "usable" info.
    The blame "may" (well i think it is) be a "baytay + i915 kernel drivers" fault, these thread are intresting :
    - https://bugs.freedesktop.org/show_bug.cgi?id=88012
    - https://github.com/OpenELEC/OpenELEC.tv/issues/3726
    what intresting is that there is path (for use of "legacy-turbo"), sory not remenber where i get it
    -- gpu-drm-i915-fix-vlv-crash.txt --
    Revert back to legacy turbo for vlv, fixes random crashes.
    Reported by Timothée Giet <[email protected]> on dev@ ml.
    https://bugs.freedesktop.org/show_bug.cgi?id=88012#c33
    --- linux/drivers/gpu/drm/i915/i915_irq.c.orig
    +++ linux/drivers/gpu/drm/i915/i915_irq.c
    @@ -4361,12 +4361,7 @@ void intel_irq_init(struct drm_i915_priv
        INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
        INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
    -    /* Let's track the enabled rps events */
    -    if (IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
    -        /* WaGsvRC0ResidencyMethod:vlv */
    -        dev_priv->pm_rps_events = GEN6_PM_RP_UP_EI_EXPIRED;
    -    else
    -        dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
    +    dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
        setup_timer(&dev_priv->gpu_error.hangcheck_timer,
                i915_hangcheck_elapsed,
    I did use the trik on a custom kernel, i do have freeze (none tomoroy but two today but only on using firefox, so may be another probleme (sna))  but not on video (well i had run 15 video same time, and two where running 2 hours after without crash). May be you should try it (i think it work better).
    note : link to make custom kernel -> https://wiki.archlinux.org/index.php/Ke … raditional

  • Ipod 4th gen Win XP needs a mass storage driver but can't find one

    Hi Guys,
    Just got a new PC, Ipod Was fine on my old one. However under Win XP, Ipod update and Itunes all installed correctly, but XP keeps asking for a MAss Storage driver. Tried alsorts of things including reinstallation of all iPod Software, but still as soon as I plug in my iPod, XP detects new hardware and asks for driver. ITunes doesn't detect iPod, but will happily play songs in my Library.
    Help.
    Maybe I need an idriver or an iXP operating system
    Cheers
    Andy.

    Its a new PC, so the install was from the original XP CD, then installed iPod and iTunes Software. I assumed the drivers where in the iPod Disc and not from the XP disc. I'll try the XP Cd.
    Thanks
    Andy.

  • Device Manager displayed " Mass Storage Controller (Code 28)"

    Greetings to all Members
    I am using AMD 64 x2 3800+ processor. MSI mortherboard K8N Diamond. Graphic cards, two units, Geforce GTX6600GT. I am running on Window XP SP2. I have also updated the AMD latest drivers.
    I noticed each time I log on the computer, the computer would prompt "New Mass Storage Hardware Found" and prompt the wizard to install new found hardware.
    I went to device manager and noticed the device status display "This drivers for this device are not installed (Code 28). I have also carry out all the steps as suggested from the device manager menu. Mass Storage Controller location is: PCI Slot 9 (PCI 3, device 0, function 0 is displayed at the Mass Storage Controller Display. The device Instance ID display "PCI\VEN_1095&DEV_3132&SUBSYS_710A1462&REV_01\4&14AECDBO&0&0060.
    Try update driver option but to no success. Have all the driver systems (in the CD) that came together with the system installed as well. Again to no success in resoluting the problem.
    To my horror after installing the drivers that I have downloaded from MSI website for the said board.
    I notice the Virtual drive program failed to initialize.and the following messages were displayed during the installation of the website drivers for the said mortherboard:
    There was a problem installing this hardware
    Mass Storage Controller
    An error occured during the installation of the device. The name is already in use as either a service or a service display name.
    Can someone please help me to resolve this problem? Any suggestion or advise would be sincerelt appreciated.
    Best Regards
    Harry
    Can someone please assist and provide me with some guidelines to resolve this problem.

    Hi Bas
    I manage to remove the yellow exclamation mark from the hardware, device manager by setting the Integrated Peripherals on Board Sil3132 mode from Sata to Raid.
    The Sata and Raid controllers is displayed and upon opening it up further, I noticed the following controllers are displayed:
    1 ) FarStone CDAWDM2001 SCSI Host Adapter.
    2)  Silicon Image SIL3132 SataRaid Controller.
    Do you think I have set the right thing? Your kind opinion on this. I am using BIOS version used is 1.A
    Thanks
    Best Regards
    Harry

  • BB 9360 Curve don´t connect the mass storage to my usb car audio system.

    Hello:
    I´ve got a BB 9360 curve. There is no problem when i connect to my PC, It questions if i want connect mass storage, charge, etc...
    But when i connect it to my USB car audio system, it connects automatically to charge without any message or option to connect to mass storage, and i can not access to my music stored in the memory card.
    Waiting your answers, so many thanks to all.

    Hello xaxu and welcome to the BlackBerry® Support Community Forums.
    Thanks for your question on Mass Storage mode.
    Currently, Mass Storage mode is supported when the BlackBerry® smartphone is connected to a Windows® or Mac® based computer system. 
    Hope this answers your question. 
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

    My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

    Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
    tt2

  • All of a sudden, Media Card Support / Mass Storage Mode Support isn't working on Win 7 Pro SP1 64-bit OS

    I routinely connect my BB Tour 9630 to my PC to pull photos off of it ... all of a sudden, it is no longer seen by Windows.
    In Event Viewer this is seen as 14 instances of: Event ID: 10110, DriverFrameworks-UserMode
    +
    System
    Provider
    [ Name]
    Microsoft-Windows-DriverFrameworks-UserMode
    [ Guid]
    {2E35AAEB-857F-4BEB-A418-2E6C0E54D988}
    EventID
    10110
    Version
    1
    Level
    1
    Task
    64
    Opcode
    0
    Keywords
    0x2000000000000000
    TimeCreated
    [ SystemTime]
    2014-12-15T16:32:49.438150100Z
    EventRecordID
    66704
    Correlation
    Execution
    [ ProcessID]
    1576
    [ ThreadID]
    3764
    Channel
    System
    Computer
    I7_35GHz_W7P64b
    Security
    [ UserID]
    S-1-5-18
    UserData
    UMDFHostProblem
    [ lifetime]
    {03539CE9-29D1-48AE-9E98-0A3F92CA3E61}
    Problem
    [ code]
    3
    [ detectedBy]
    2
    ExitCode
    3
    Operation
    [ code]
    259
    Message
    72448
    Status
    4294967295
    and, 14 instances of Event ID: 10111, DriverFrameworks-UserMode
    +
    System
    Provider
    [ Name]
    Microsoft-Windows-DriverFrameworks-UserMode
    [ Guid]
    {2E35AAEB-857F-4BEB-A418-2E6C0E54D988}
    EventID
    10111
    Version
    1
    Level
    1
    Task
    64
    Opcode
    0
    Keywords
    0x2000000000000000
    TimeCreated
    [ SystemTime]
    2014-12-15T16:32:49.452150900Z
    EventRecordID
    66705
    Correlation
    Execution
    [ ProcessID]
    1576
    [ ThreadID]
    3764
    Channel
    System
    Computer
    I7_35GHz_W7P64b
    Security
    [ UserID]
    S-1-5-18
    UserData
    UmdfDeviceOffline
    [ lifetime]
    {03539CE9-29D1-48AE-9E98-0A3F92CA3E61}
    DeviceInfo
    FriendlyName
    BlackBerry 9630
    Location
    0000.0014.0000.014.000.000.000.000.000
    InstanceId
    USB\VID_0FCA&PID_8007&MI_01\6&CEEA896&1&0001
    RestartCount
    5
    and started at 12:05:02 on 14-Dec-14.
    I have created a Debug Level Support Log and can make the four files created today available as a ZIP ... with a little guidance from a knowledgeable source as to how sensitive the info contained therein may or may not be in terms of just posting it here publicly.
    FYI - I tried uninstalling everything BB-related in DevMgmt.msc and restarting the computer, however, under:
    'Universal Serial Bus controllers' there is an instance of a
    'USB Mass Storage Device' - Properties: 'This device cannot start. (Code 10)'
    that will not resolve by any conventional 'Update Driver' means.
    Something weird is BB Desktop Software 7.1.0.41 reports no Installed BB Device Software(?)
    I didn't change anything locally ... I'm just wondering if TELUS Mobility pushed some kind of an update on me that has screwed things up.
    Thanks for any help offered ... FFF

    Thank you curve8530curve8330 for stepping up and helping me out ...
    I think I'll try re-installing the BB Desktop Software 7.1.0.41 ... the ' ... no  BB Device Software installed ... ' GUI message has me concerned that there has been a Registry disconnect somehow involving the USB driver software registered with BB D. S. 7 ... this would indeed be a Windows 7 problem ... I'll update the thread and give you credit for pointing me in this direction ... if it works.
    However, to be clear, I am connecting my 9630 using a USB interface cable connected to a USB 2.0 port on the Win 7 system ... I am not removing the 8GB MicroSDHC card from the phone and then utilizing a MicroSD to SD adapter or SD port ... whatsoever.
    And , as for connecting via another computer, now that I have thought about this some more, that may have been what precipitated the problem in the first place ... I had experimentally tried re-connecting the 9630 to an XP Pro SP3 32-bit notebook loaded with BB D. M. 5.0.1.28 ... (after never having done so again since the Win 7 Pro SP1 64-bit / BB D. S. 7.1.0.41 system came into use).  I don't see, off-hand, how that could have caused this issue, however, the coincidence is too large to ignore.
    FFF

  • Ipod not being recognized...Windows XP Mass Storage Problem

    I'm like many of you who installed the new Itunes 7 and is having the same connection problems. My 30g video Ipod will not be recognized on my laptop and itunes. I believe my usb cord is working properly because when I connect my ipod into the laptop it charges.
    I've tried everything that was said on this forum: the five r's, disk mode, updating drivers, etc.
    But I was wondering: I have the iCarPlay FM Transmitter Has anyone noticed, that when they connect their ipod into it, a error pops up on the screen: "USB Connection and Firmwire are not compatible"...something along that line. And now when I connect my ipod, the sound is absoultely terrible! It only comes out of one speaker in my car. My friend owns an ipod nano and hers works perfectly with my transmitter.
    Now my other question: I don't see my ipod in the device manager...but I do see is Mass Storage Controller highlighted with a big yellow exclamtion triangle. I click on it and try to install from the ipod cd and nothing happens, I can't even uninstall it. Do you think that's my ipod not working?
    Also, I've tried connecting my ipod to my two computer desktops and it's not recognized either and I also tried connecting my ipod to my sister's Mac computer and nothing happens.
    Any other suggestions to help my ipod? When the heck is Apple going to respond with a new update?
    I should of just bought the Zune instead of the iPod!
    Dell Inspiron 700m   Windows XP   laptop

    Follow the instructions in this link: http://docs.info.apple.com/article.html?artnum=305136 Even if there are no updates available, follow the instructions to reload your USB driver. After that, go into Device Manager, right click on your iPod and reformat it (FAT32). After this go into iTunes and Restore your iPod.
    "I should of just bought the Zune instead of the iPod!"
    I know you are frustrated, but statements like this don't exactly motivate others here to help you. And if you think that would solve your problem, go to the Zune discussion groups.

Maybe you are looking for