Kyocera printer offset/margins completely wrong

Hey there! I'm new to printing under Linux.
I finally got CUPS to work, installed foomatic, etc. and found appropriate drivers (.ppd) for my Kyocera FS-1020D from a WinXP driver package. Everything seems to work correctly, the printer is detected under CUPS, I can see its settings too. However, when I print a document, it will overflow on the page. (as if it started printing at the bottom of the paper)
I really can't see what I should do, I feel I'm missing something completely obvious. Do I have to somewhat calibrate or set the printer?
Thanks in advance.

I tried the printer on a Windows XP box. It had the same problem, therefore it comes from the printer itself. So can anyone help me out with this issue (not CUPS/Linux-related anymore) before I ditch that printer?

Similar Messages

Adobe print form margin problem

Hello,
I am trying to print a Adobe print form on Kyocera printer(Using HPLJ4 device type).
I want to print content from 0.5 CMs, but if i give no margin in the design,Output is being Cropped.Print preview is okay.
Can any one help me?
Thanks,
Guru Prasad

Hello,
I think you can try with different device type like POSTSCPT or SAPWIN,
During the print it use different character widths when you use different device types to
output the same form, HPLJ4 is PCL-5 and the largest.
You can refer to notes 90437 and 183948 for more information.
Best Regards,
Wen Peng

Font Metrics, Completely Wrong Values

So what's the deal with font metrics?
The values it gives are completely wrong.
For example with a monospaced font i printed out every single
character on screen (upper, lower, 0-9, symbols).
The font metrics were:
ascent: 17
descent: 5
height: 22
leading: 0
Im trying to find the correct ascent. The REAL ascent is only 10.
The font metrics value is off by 70% and it usually is off by a lot for
all the fonts ive tried. The descent is off by 2 which isnt bad i guess.
Anyone know how to get the ACTUAL size?
in this picture the ascent is high but in my experience it is much higher:
http://www.devx.com/Java/Article/7932/1954?pf=true

The Line and Font Metric units are pixels not points.
That applet doesnt work.
Any attempt to use the "patch" results in:
Exception in thread "AWT-EventQueue-2" java.lang.NoSuchMethodError: gui.PatchFontMetrics.patch(Ljava/awt/FontMetrics;)Lgui/PatchFontMetrics;
at test.FontInfo.describeFont(FontInfo.java:56)
at test.FontInfo.handleEvent(FontInfo.java:77)

How can I print out a complete pdf file of PSE 10 user guide?

This is worse than trying to deal with the government bureaucrats....I am simply asking how I can print out a complete pdf file of the user guide for PSE 10...I had one for version 9 but cannot get anything for version 10??? The address shown in the getting started manual doe snot go through??? HELP!!!

Download from here:
http://help.adobe.com/en_US/elementsorganizer/using/elementsorganizer_10_help.pdf
for the Organizer
and this faq:
http://forums.adobe.com/thread/992825?tstart=0

HT1296 I have a Voucher that needs to be printed. I completed a survey on my iPad but obviously, I cannot print it from the iPad. How can I transfer it to my pc, please?

I have a Voucher on my iPad screen that needs to be printed. I completed a survey on my iPad but obviously, I cannot print it from the iPad. How can I transfer it to my pc, please?

You can also take a screen shot of your screen displaying the voucher. Press and release the Sleep/Wake button and the Home button at the same time. The screenshot is added to your Camera Roll album.
Note: On an iPad without a camera, screenshots are added to the Saved Photos album.
Then, you can transfer the photo to your computer as described in Copying personal photos and videos from iPhone, iPad, or iPod Touch to your computer, http://support.apple.com/kb/HT4083
Or you can email the photo to yourself.

Preview improperly displays PDF created by Kyocera printer/scanner.

Preview improperly displays PDF created by Kyocera printer/scanner. Adobe Reader displays same document ok. It appears that Preview is displaying low res CCITTFaxDecode thumbnails rather than high resolution DCTDecode images. The PDF in Question
http://www.uvm.edu/~waw/archives/Binder2.pdf
I hate to think that Adobe Reader 9 can do something Preview can't

Search for the manual on the european site http://canon-europe.com/ - the versions there (at least for the A1100 IS) do not have the annoying COPY watermark.
The direct link for the A1100 IS manual is http://files.canon-europe.com/files/soft32765/manual/PSA1100isCUGEN.pdf
Thanks to a post on dpreview for the hint - http://forums.dpreview.com/forums/read.asp?forum=1010&message=34633050
-dh

Crystal 11 - Latest Service Pack loaded - problem with Kyocera printer

Post Author: sorrock
CA Forum: Integrated Solutions
Hi
We are using Crystal 11 Report Writer, and Sage ACCPAC. Since Upgrading our ACCPAC all the crystal reports that ACCPAC utilises are coming up as garbage on the preview screen. I have ruled out a sage issue by opening crystal directly and opening the respective report, the garbage still appears, if I change the printer that it is set to then the report appears fine.
The printer is a Kyocera - fs-c8026n the driver is a Kyocera Mita extended Driver.
Any other printer is fine - so I am looking for anyone who has had problems with a Kyocera printing garbage.
I have loaded the latest service pack for Crystal.
Can anyone please help - apologies if I have put this on the incorrect forum
Thanks
Stacey

Hi Jim,
You can upgrade to CR XI R2 for free by downlaoding the trial version, install using your XI keycode and then getting a keycode for XI R2 to enable all features.
Or to upgrade XI only then install the latest service pack will bring you up to date.
Thank you
Don

Removing printer offsets from PDF pages

I accidently set up a printer page offset when creating PDF pages from Word Perfect X3. Is there a way to remove the offset, or do I need to go back to the original WP pages (which I can't find!)?

I recreated a page and made sure there were no offsets listed. The PDF page still prints offset. I found sources to recreate the page, displayed codes, and removed anything marked as offset. There is still an offset to the left when pre-print displaying either the source page or the PDF version.

Exporting sequence from Premiere CC to Audition CC opens completely wrong clips in multitrack

I export my sequence from PP and Audition opens 100% incorrect video and audio! Nothing is the right clip, totally wrong files are being opened. I have no clue at all what is going on. Can anyone help?
Footage is DV PAL. Audio is single stereo audio file (made in Audition CC) on dialogue track and single stereo music track, both 48KHz 16bit. All audio is going into Audition at 0db with no effects (ie untampered).
I've done plenty of other mixes with the same project in different sequences with no problem at all (starting in CS6 and now working in CC - it's a feature film project with many tracks and over an hour long). The primary feature mixdown has been done and worked beautifully last week. Now I'm working on a trailer which is only 3 minutes long, using the rendered movie as my primary source, so it should be quite simple.
I have had a look at the xml (of which I only have the most basic understanding) and the document clearly references completely wrong files, so I think you are right and it's a PP issue rather than Audition, which just seems to be fed crap to start with!
My specs are:
Mac Pro 5,1 - 6 Core 3.33GHz
48GB RAM
GTX 680 Mac
OSX 10.8.5
Adobe CC - up-to-date
playout via Focusrite Saffire Pro 24 (FW400)
Thanks for any help!
Dominic
PS
This is a copy of a thread I started in the AUdition forum but was advised to ask here instead.

Not a direct reply to your question but...
I have only exported video to Audition as a reference track- preferring to use the PP timeline for the master export. I somehow feel it's less prone to image quality loss (codec dependent!)
To that end, I add the imported Audition mix-down either as a single or multiple stems, depending upon the project requirements, and place them in sync in the original timeline.

CSS Pages show up completely wrong Contribute

I am trying out the 30 day trial of Contribute so I can edit
the text of my website. My web developers built the site using CSS,
which I understand can sometimes be problematic in Contribute. The
regular pages are fine, but any page that links to the shopping
cart shows up in edit mode totally wrong and with no editable text
visible. This problem occurs on all the pages that show collections
of product, but not on the pages that relate the company info. Here
is a link to an example page that shows up completely wrong in
edit.
http://www.babychaleco.com/products-boys.php
Do you know any way to fix this?

I am trying out the 30 day trial of Contribute so I can edit
the text of my website. My web developers built the site using CSS,
which I understand can sometimes be problematic in Contribute. The
regular pages are fine, but any page that links to the shopping
cart shows up in edit mode totally wrong and with no editable text
visible. This problem occurs on all the pages that show collections
of product, but not on the pages that relate the company info. Here
is a link to an example page that shows up completely wrong in
edit.
http://www.babychaleco.com/products-boys.php
Do you know any way to fix this?

Printing and sending completed forms with free adobe reader

How can readers fill forms and save the form for printing WITH their completed responses?
I've created forms and saved them as 'reader extended' expanded options but readers claim they print 'blank' where the form fields are.

I am using adobe professional and save as reader extended to allow for exactly what I need but the reader says the saved version with responses is blank when printed.

ITunes Match albums view completely wrong (only on iPad)

Hi guys!
So for quite some time now I am having a big problem with my iTunes Match:
The albums view is completely f*cked up!
ALL albums I have show up under EVERY letter (meaning: To reach "B" after "A" I already scrolled through _all_ my albums)
Wrong songs show up in wrong albums
Number of songs per album is completely wrong
... and other things
This whole thing is really annoying as I have 3k songs in my iTunes Match lib.
Important:
Deactivating and then Re-activating iTunes Match does NOT help.
ONLY occurs on my iPad 4! On Mac & Win and also on my iPhone 5 it is fine.
I didn't have this problem on iOS 6.
On another note (just my 2 cents):
iTunes Match altogether is _very_ buggy and I am having a lot of small problems with it! :/ (one being Step 1 takes about 30mins each time on my Windows PC)
Can anybody help?!
Thanks! Cheers, P

I tried that as well!
Didn't change anything! :/
I also tried deleteing these files on my iPad:
MediaLibrary.sqllitedb
MediaLibrary.sqllitedb-shm
MediaLibrary.sqllitedb-wal
Then did a hard reboot! Also no change!
What is weird that when I swtich on 'order by artists' (or whatever this optin is called in English) the ordering of the Albums (by artists - obviously) works proplery and the right songs show up in the right albums.
Oh gosh I hate this iTunes Match thingy. Problems all over the place since release now.

Kyocera Printer Access Code

We have a Kyocera Taskalfa 250ci that requires an access code. We cannot figure out where in the printing process we can set this from our Mac driver. In Windows it is part of the Kyocera specific printer setup. Can anyone tell me how to set this on Mac OS 10.6 and 10.7?

We have a similar feature with our Canon imageRUNNER copiers called Department ID /Job Accounting. In the Canon driver there is a menu item called Special Features and this has a window that lets you enter your ID and password. There is also a setting in this menu that can make a pop-up appear when you print allowing you to enter your ID and password. So I would expect that the Kyocera printer driver has a similar menu. If you have checked all the menus for the supporting driver and you still cannot find the setting then you should check with your local Kyocera support, unless someone else replies here with the answer.

ICal dates completely wrong

I just noticed that iCal's dates on my MBP are completely wrong. For example, though it correctly states that today is December 30, it says that December 30 is a Friday instead of a Wednesday. It also says that January 2010 only has 28 days and that February 2010 has 31 days, also completely wrong. What can I do to fix this?

I have the exact same problem. If I use cmd+t to go to the current date (1/13/2010) it goes to the correct calendar but the mini calendar on the bottom left is titled "December 2009" instead of "January 2010".
I also have serious problems with recurring events. I set all my classes for the semester to end on the last day of school, but when I check the last day of school, it seems that they all end on different dates. Also, I cannot change them either. I try to reset the end dates, but even if I change them and hit done, they still revert back to their random dates. Help!

Something is completely wrong with the itunes ios7

Something is completely wrong with the itunes on my phone after I downloaded ios7. I click on a song and it doesn't play. I close itunes, reopen it, and it starts playing a different song from the album shown in the photo. What's up?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Kyocera printer offset/margins completely wrong

Similar Messages

Maybe you are looking for