L do not see an orange line in the browser for clips that are in the timeline. What do I do?
How do I get the orange line to show in the brewer for clips that are in the timeline. Mine doesn't show it.
I called Apple and said it is a glitch which caused me not able to see a registration key. They sent my $30 back so I will make another order of Quicktime Pro 7 to get registration key.
Similar Messages
-
I have three Airport Extreme (AE) routers in my home network.
The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
What should I do?
For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
FYI
HP LaserJet Firmware Update Utility for HP P2035n is available
Version: 20120105 (19 Mar 2012)
Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
I'm assuming that you are asking about an Ethernet switch here, correct? The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
Post back if you need any tips to get things setup. -
Hi All,
We are planning to regress IOS mobile app that were developed in our organization with the help of Mobile Automation tools that were available int he market both commericial as well as non-commercial. Can anyone please provide us with list of tool that were certified by the apple to use for our needs in the functional as well as regression of the developed applications. I am having a list of tools that we got from the net when browsed,
UIAutomation
TestFlight
SeeTestMobile
M-eux
NativeDriver
Frank
FoneMonkey / Mokey Talk
DeviceAnyWhere
KIF
LessPainful
iCuke
UISpec
Zap-Fix
TestQuest
T-Plan Robot
Sikuli
TestPlant
Can any one of you let me know from the list as what are the tools that was certified the apple, apart from this list anyother tools that i may miss from the list that were certified by the Apple
Revert back ASAP
Wating for the replyHi All,
We are planning to regress IOS mobile app that were developed in our organization with the help of Mobile Automation tools that were available int he market both commericial as well as non-commercial. Can anyone please provide us with list of tool that were certified by the apple to use for our needs in the functional as well as regression of the developed applications. I am having a list of tools that we got from the net when browsed,
UIAutomation
TestFlight
SeeTestMobile
M-eux
NativeDriver
Frank
FoneMonkey / Mokey Talk
DeviceAnyWhere
KIF
LessPainful
iCuke
UISpec
Zap-Fix
TestQuest
T-Plan Robot
Sikuli
TestPlant
Can any one of you let me know from the list as what are the tools that was certified the apple, apart from this list anyother tools that i may miss from the list that were certified by the Apple
Revert back ASAP
Wating for the reply -
Not seeing menu template in front of background video clip
When I put my video clip in the editor for a background and pick the tutorial main menu template, I do not see the diagonal lines in the editor, only buttonsfrom the template. So , I am not seeing the template in front of my backround clip.
Did not receive a response so I cancelled this post.
-
Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALASounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock -
Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It is normal for me to plug it in overnight and to see no charge whatsoever the next day. I have never had so much trouble using a friggin charger in my life. It just seems to be exceedingly finicky. What am I missing?
Charging your iPad should not be problematic. It should be an easy thing to do using the charger provided with your iPad connected to a known good wall outlet.
The charging problem you are experiencing is most like caused by:
1. A faulty charger
2. A faulty cable
3. A bad wall outlet
4. A problem in the iPad.
The first three of these are easiest to eliminate. Try a for ends charger and cable. Make absolutely sure your outlet is good. Try other outlets.
If the charger, cable and outlet a proven to be good then the problem lies in the iPad.
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-install a previous version b/c I need both a product Id (GOd only knows where that is now) and a way to uninstall the trial. Any ideas?
When you installed the trial, there should have been an option to have ignored your current installation and leave it. Apparently you skipped that case. To uninstall the trial (in Windows) go to Control Panel>Programs & Features and select the Acrobat XI and choose uninstall. After the uninstall run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up your system. HOWEVER, if you see your old Acrobat in that window, do not run the cleaner, but do a repair on the old version.
You did not mention the old version you had. You might try from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. As for the S/N, you should have register and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.
Be sure to backup any download of the old installer and the S/N to CD or backup HD for future use. They will not likely continue to be available. -
How can not see a tv program on my iPad or Macbook that i bought on iTV?
How can not see a tv program on my iPad or Macbook that i bought on iTV?
Ya I'm having the same problem, I cannot see my windows shared folders on my mac, and I was able to before I installed leopard. With Tiger it worked just fine. I've tried a fresh install and it still wont see it.
-
My computer and itunes app do not see my iphone when I plug it into either USB port on the computer. The cable works because I can hear the iphone start charging off the computer. But there is no indication of the device in itunes or on my hard drive device list. Any ideas?
Have no idea what you mean by "basic stuff". Try EVERYTHING in this support article:
iPhone: Not recognized in iTunes for Mac OS X -
I have an apple iphone 4gs... It is synced with my outlook exchange in the office. If I do a search for emails that also checks the server then all of a sudden I end up with various amounts unread email with the inbox saying "Inbox 71" ..which is not true. The only way to make the inbox on the iphone back to 0 is to delete the account then re install it.
Anyone have any ideasWe need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.
-
I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?
Check your settings in Options > Applications: https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox#w_check-firefox-settings
Also see:
*https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox
*http://kb.mozillazine.org/File_types_and_download_actions
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox] -
when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?
I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!
-
Cannot see the system folder(private work area) in the dependency manager
Hi
I am not able to see the 'system folder'(private work area) in the dependency manager tool.
I have captured the user schema in this folder, and want to see dependency information of objects in it.
Please Help.
ThanksHi Guru,
Please go through SAP note # 1333684 and configure accordingly.
Also, follow the note # 1042993, if problem is not getting resolved.
Thanks
Pavan -
I have just bought the new iPad but can't see how I would sync all my iPhone photos that are stored on iCloud onto my iPad. Can someone help?
Photos on the camera roll can be included in an icloud backup from an iOS device (if camera roll is turned on). But getting the photos back from a backup is risky. Many users have performed restore operations from a backup only to discover the photos were not returned. icloud is primarily used to sync photos to other devices using photo stream - but only new photos taken after the stream is turned on in Settings>icloud will actually be synced, not old photos.
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album). You can then sync the photos to the iPad.
http://support.apple.com/kb/HT4083 -
The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?
I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).
Maybe you are looking for
-
After reinstalling, some of the songs in my library have 'get info' greyed out
This is really bizarre and getting me really frustrated. Like so many other people apparently tonight I got a notice to update and it screwed up iTunes. So I uninstalled everything and reinstalled iTunes. I made sure that I saved my library beforehan
-
We're coming to the end of a 6 month evaluation of the E71 as a potential standard for our organization. The device is superb in every aspect but one. Unfortunately the one is lethal and as a result the standard will be 'Something Microsoft based'.
-
Inspection lot shouldn't create for Transfer posting(311) sloc specific
Dear Expert, i need expert advice on this issue. here specific to one plant when user is doing transfer posting through movement type 311, user doesn't want inspection lot (specific to storage locations ). Here specific to that Material quality is ac
-
Datatypes and names of columns of recordgroup during run-time
Hi everyone, Can you please tell me that Is it possible to get the datatype and name of columns of a recordgroup during run-time or not. So that I don't waste my time in searching for this solution. If you are not getting my question then please let
-
In my query I have Select 1235 as 'Integer_Field' from Table. Is there a way to specify that 1235 is an integer here? I'm connecting to oracle through asp.net and when I populate a DataTable, it's assuming this is a string field, then sorting doesn't