" L-EC uncorrectable error " and " Multiplexer error " in both Toast & iDVD

Hi there ,
I've had issues with burning DVDs for ages and have a 3" stack of irridescent coasters to show for it .
I recently stopped getting the error msg , "Multiplexer error : failed to write etc." after deleting the encoded asstes from Advanced tab and then I started getting this L-EC Uncorrectable jazz in both iDVD and Toast (even when burned at 1x) .
There HAS to be some file somewhere throwing off these programmes . I also wonder why the programmers write error messages decipherable only to those with a Phd. in computer science . Besides , if it's all just 1s and 0s , how is it "uncorrectable" ? I CAN FIX ANYTHING !!
Thanks for your time ,
Edmund

+I started getting this L-EC Uncorrectable+
I've never heard of that...
+I generally leave the room on tip toes once the burning process has started .+
Always a good strategy.
Have you created a new User and tried burning from that User?

Similar Messages

Error: L-EC uncorrectable error.

Getting this error at work on a dual 2ghz G5 tower running 10.4.11. 2GB of RAM. DVD Studio Pro is 4.2.1. When burning a DVD it goes through the process but when it gets to "Writing files" the following error pops up: "The recording device reported the media error: L-EC uncorrectable error. (0x11, 0x05.)"
I'm burning to a Memorex dvd-r 16x 4.7gb
The dvd burner in the tower is a Pioneer DVD-RW DVR-106D
So what does the error code mean? Is there any way to fix the error code? I've heard that the actual dvd can be the culprit. The burner itself works fine aside from Studio Pro, it still reads and plays DVDs. Please Help!!! Thank you all for your time!

I've had issues with burning DVDs for ages and have a 3" stack of irridescent coasters to show for it . I recently stopped getting the error msg , "Multiplexer error : failed to write etc." after deleting the encoded asstes from Advanced tab and then I started getting this L-EC Uncorrectable jazz in both iDVD and Toast (even when burned at 1x) . There HAS to be some file somewhere throwing off these programmes . I also wonder why the programmers write error messages decipherable only to those with a Phd. in computer science . Besides , if it's all just 1s and 0s , how is it "uncorrectable" ?

Multiplexer Error message when using iDVD

I have been using iDVD successfully but now have a problem. I set up the program and everything is working fine then, just towards the end of the build, I get a 'multiplexer error' message and everything stops. It does NOT say 'not enough memory'. What could have gone wrong? (The particular .mov file, produced on Final Cut Express, I am attempting to burn has been successfully run on iDVD previously without menus; the only change has been to create chapters and setting iDVD to make a menu.)

Hi
From FCE/P I do
• Export out as QuickTime .mov file
• Not selfcontained (not important but saves time and space)
• NO QUICKTIME Converstion
This file I import into iDVD.
*Multiplexing Error*
PART One.
Use of strange video/audio material eg .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio = .aiff (as on audio-CDs) (else coverted to this .aff 48KHz)
*Using strange letters in video project name* eg +,/; etc. keep to a-z and 0-9
strange letters in project name eg +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly eg x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in:". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutly needed.
eg external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing widescreen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taio Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From: Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on grey background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the uneditited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
Yours Bengt W

Uncorrectable error detected by pci0... during DVMA read transaction

hi people... at first, sorry for my english. I hava a Sun Fire 280R with Solaris 8 and today it boot aparently without a reason, it boot 5 or 6 times. The error before the fall is:
WARNING: Uncorrectable error detected by pci0 (safari id 00000000.00000008) during DVMA read transaction
panic[cpu0]/thread = 2a10001fd20: Fatal PCI UE Error
syncing file systems... 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 done (not all i/o completed)
dumping to /dev/dsk/c1t0d0s1, offset 429588480
I can not make a backup and sometimes I can not logon because it cause the boot. I have reading something of this error and I have puting the machine in diagnostic mode:
auto-boot? = false
diag-device = disk
diag-level = max
diag-switch? = true
After this, power-off and after this I have igniting the machine... I have almost one hour waiting and no notice... the screen continue black :-(
Can somebody help me?
THANKS! Ceci.

Ceci,
First off, <font color="firebrick">WRONG FORUM</font>.
This forum is for discussions of the <u>Live Upgrade procedure</u> of installing Solaris.
Period.
Having said that...
Diagnostic mode sends all console output to the TTYa port.
You will never see the diag results on your monitor.
Particularly for such a system as a 280R that was
never intended to run with a graphics card and keyboard/mouse.
Set up a TIP session and start the diag boot all over again.
Capture all the output to a file
You appear to have a hardware issue.
We can only guess what the real root cause might be
(third party adapter card? Solaris not patched?)
You would get the best guidance and analysis if you open a service case with Sun techsupport.
These forums are user-to-user discussions. This is NOT Sun techsupport.

L-EC uncorrectable error. (0x11, 0x05.)

anyone know this one?
The recording device reported the media error: L-EC uncorrectable error. (0x11, 0x05.)
I burned 3 DVD's yesterday morning... all played fine.
after lunch I was trying to burn 3 more(different files) and I got that error.
I have successfully burned these using toast w/ the same burner so I don't think it's a hardware problem.
I have deleted DVDSP prefs and have tried creating a new project and re importing several different media files and nothing will burn, the encoding happens and then it says writing lead in and after a few spins it kicks it out.
I have even tried a different brand of DVD-r to see if that made a difference and that didn't solve the issue either.
So if anybody has any input... sarcastic comments or humorous thoughts please share, I am all ears right now.

Don't overlook Google. Type in the Error exactly and hit search. A fantastic solver of info.

TS2634 My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What

My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?

Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article.

Airport Utility `install failed' error with both 6.0 and 6.1

Hi folks
I am running Mac OS X Lion 10.7.4 (11E53) and cannot get the Airport Utility to run at all. [5.5.3] The application icon flickers as though it is about to launch and then nothing happens.
I have tried other 5.x downloads and they all fail because I am running OS X Lion 10.7.4.
Doing a standard Software Update or using a download of 6.x from the Apple Support site, the installer comes up with an `install failed' error with both 6.0 and 6.1, having gotten through the complete process and looking like they were `successful'.
It's the only time in two years and many updates later that i have come across this issue, so I am unsure how to start to tackle it.
Any ideas or suggestions please?
Thanks in advance.

Welcome to Apple Communities
Backup your files and try this:
1. Reboot from recovery partition (or as in my case USB recovery drive)
2. Select Re-install Mac OS X
3. Allow the process to run through multiple restarts
4. When reinstall process is complete run software update (side note, my software update would not launch as long as my USB recovery stick was plugged in, weird)
5. Run all updates saving the Airport Utility 6.0 until last.
6. Install the airport utility from software update.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly. I am on holiday and want to read. Thanks for speedy reply.

Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.

If my Adobe Muse and Air apps are both up to date as of today and I cannot open a Muse file, what are my options? I get an error message regarding the Progress Window showing and then Muse crashes.

If my Adobe Muse and Air apps are both up to date (as of today) and I cannot open a Muse file, what are my options? While Muse is relinking assets I get an error message regarding the Progress Window "showing" and then Muse crashes.

Hi there,
Do you get this error while opening a particular file or all files?
Please try opening a different .muse file, and check if it does the same?
Ar you opening a .muse which is saved on a network drive?
Thanks.

I am having problems with Olympus .orf files one files cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas? minzen

i am having problems with Olympus .orf which cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas? minzen

That camera model is too new for your programs. Every camera has its own raw format and ACR must be updated to include the info for each new model as it comes out. The workaround would be to download the free Adobe DNG converter and use that to convert your ORFs to DNGs that your version of Camera Raw can read.

I have ios7 on my iphfone 4 I now have a iphone5 with ios8 I cannot access the cloud to download my contacts and apps. the error is both phones need to be ios8, my iphone4 will not allow changing to ios8. can anyone help. Thanks

i have ios7 on my iphone 4 I now have a iphone5 with ios8 I cannot access the cloud to download my contacts and apps. the error is both phones need to be ios8, my iphone4 will not allow changing to ios8. can anyone help. Thanks

Contact Apple and speak to someone in account security.

IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Burning error when using toast

i am using leopard 10.5.5 and using toast 9.0.2 with the hd plugin.
i am getting an error when trying to burn a dvd, i have created a file in an animation program, taken it into final cut pro, edited what i wanted, then exported it as 1080i50. the file plays no problem in quicktime on my laptop, but i need to put it on DVD. opening up toast, it goes into the prog window, encodes the file but then i get an error, -50, can not burn DVD.
does anyone know of this problem, or maybe has any ideas on what i can do to work out the problem?
cheers
bret

Bruce Etnyre wrote:
His first sentence states the OP is using 10.5.5 and apparently has not updated the profile.
sure confused me
I occasionally get errors when using Toast to burn DVD’s. I found quitting other applications during the burn eliminated the errors. Not the optimal solution, but it couldn’t hurt to try.
I think he is referring to HD DVDs per his first sentence, but it's not clear to me.
It could be anything from a bad blank to a flaky optical writer to, as you mention, other software running. I usually turn all my apps off when burning DVDs. Mail, Safari, Firefix, etc., although on fast machine like this one it probably does not matter.
On the other hand, when I burn a R/W DVD or CD, I ignore these things and just computer as usual.

Neither dreamweaver nor photoshop will update. I get this error for both, "U44M1P7"

Neither dreamweaver nor photoshop will update. I get this error for both, "U44M1P7"

Try downloading the updates from http://www.adobe.com/downloads/updates/ and install them manually.

Everytime I try to burn an iMovie project to a DVD with iDVD, the disc is ejected during the Burning and Multiplexing phase before it's completed.

For months I have been unable to burn any iMovie project to a DVD using iDVD. During the Burning and Multiplexing phase the disc is ejected before it's complete. I went the Genius Bar and after many tests I was told that my disc drive was pretty much dead. The person that helped recommended that I buy an external DVD burner from amazon. I bought the new drive and I can now burn files, but I'm still encountering the same issue burning a movie. Does anyone have any idea what'g going on? I'm extremely frustrated at this point!

Read this treatise on Multiplexing by Bengt Wärleby: HT1645 I was burning a DVD and the...: Apple Support Communities.
Follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

" L-EC uncorrectable error " and " Multiplexer error " in both Toast & iDVD

Similar Messages

Maybe you are looking for