L'installation d'adobe application a échoué / The installation of adobe application failed / OK !

Le téléchargement d'Adobe application Manager s'effectue correctement, mais échoue lors de la phase d'installation (après l'autorisation d'installation de Windows 7 Pro 64 bits) / ceci est le premier accès à Creative Cloud - je viens de prendre l'abonnement annuel.
... Je lis que AAM installe un plug-in dans le navigateur - problème à ce niveau ? je suis sous Firefox 23.01 - à jour
Je viens de tester via Internet Explorer - même mauvais résultat - ce n'est donc pas un problème d'installation de plug-in dans le navigateur
J'ai trouvé la solution : j'ai téléchargé ApplicationManager7.0_all.exe (pour Windows - elle existe aussi pour Mac) trouvé sur une des pages d'Adobe
J'ai installé l'application de façon indépendante - l'installation a été en fait une mise à jour ... ?
Tout fonctionne à présent
Adobe Application Manager : The download is correctly made, but fails during the phase of installation (after the authorization of installation of Windows 7 Pro 64 bits) / This is the first access to Creative Cloud - I have just taken the annual subscription
... I read that AAM installs a plug-in in the browser - problem at this level ? I am under Firefox 23.01 - up to date
I have just made out a will via Internet Explorer - the same bad result - it is not thus a problem of installation of plug-in in the browser.
I found the solution: I downloaded ApplicationManager7.0_all.exe found on one of the pages of Adobe (for Windows - it also exists for Mac)
I installed the application in a independent way - the installation was in fact an update ... ?
Everything works at the moment
I prefer the French !!!
Regards
N Pousseur

I'm not even sure what it was downloaded to. Should I delete the application
manager and the download it again with ie to see if it works then? And if
not, try it again only with Firefox?
Edit: I tried this and had no luck. Need some serious help...

Similar Messages

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fix

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.

run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.

Why should Adobe Reader fail to print because of settings in the Edit/Preferences?

AdobeReaderDocumentCouldNotPrint.txt
Glyn Price Tue 17 March 2015
Why should Adobe Reader fail to print because of settings
in the Edit/Preference?
Adobe Reader XI Version 11.0.10
MS Window 7
File > Print > Print
I got the error message:
The document could not be printed
I googled this error message and used the following
solution that worked i.e. it then printed successfully.
Edit > Preferences
Category: Security(Enhancement) 'Enable Protected Mode at Startup'
It was checked, changed it to unchecked.
Category: Documents 'View documents in PDF/Mode'
It was set to 'Only for PDF/A'
Set it to 'Never'
Exited Adobe Reader and restart it. Then it printed.
I had a look on another computer system (Adobe Reader XI Version 11.0.10
and MS Window 7) and on this different computer I could print
without doing the above two changes.
I'm a bit puzzled. Why preferences on one system were not
needed on a different system?

Here is an elaborate method of troubleshooting this problem. There may be a simpler method if anybody wants to suggest one.
There is a general technique that is helpful in this situation. I can't give you complete instructions here, and I haven't tested this with regard to bluetooth devices, but here's the gist of it.
Create a second log-on account for your music projects. Configure it so that when you log in to the new music account, the drivers needed for the Bluetooth devices don't load. You do this in System Preferences: Accounts.
When it's time to do music, log out of your usual account and onto the new one.
When you install drivers for any peripheral, you have the option of installing them "for all users" or only for the user account that is active during the installation.
This governs whether the drivers go in root/library or root/Users/your name/library.
If drivers are in root/library, they will load whenever the Mac is booted up and will run for all users.
But if drivers are loaded in root/Users/your name/library, they will only load if you log in as "your name". If you have a second account called root/Users/music account/, and you log in under that, the drivers in "your name" will not load. Get it?
To get this working right you need to be knowledgeable about moving or deleting files in the /library/ directory and subdirectories, and you need to be careful because you can unwittingly cause some damage if you are not careful.
There is also the root/System/library directory, and in general you should never mess around with anything in there or you might hose your system.
In summary, I would start by using the installer programs for your BlueTooth devices and DE-installing all drivers. Reboot. Log back in as your usual user account. Then RE-install each driver and see if the installer program gives you the OPTION to installl for all users or just for this user. Choose the latter. Then log on to your new Music account and see if the problems go away.

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

Firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.

Win XP Home SP2
Installed Firefox, but receive the following error message:
firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.
Have uninstalled and reinstalled several times, but same message. Firefox won't even open.

Usually someone has been down the track before and occasionally they post some useful details which may help others to investigate and/or eliminate factors in their particular case.
This AccessibleMarshal.dll error seems to have a long history --- posts from 2006 with early Firefox versions had issues similar to yours.
There is a link and an excerpt below which could be worth checking in your case,
particularly since it mentions the problem would occur on a clean install (no previous instance of Firefox on the system and Windows before Vista --??)
Have a look here:
https://bugzilla.mozilla.org/show_bug.cgi?id=712960
and the post to read:
'''Mark Banner (:standard8) 2011-12-22 12:55:21 PST'''
"Created attachment 583905 [details] [diff] [review]
Add the Win32 redistributable directory to the mozconfigs"
"Somehow we missed shipping the Win32 Redistributables from Visual C++. We didn't detect this as it would only show on Windows versions less than Vista, and you'd probably only see it if you had a completely clean install, and you didn't have the dlls installed elsewhere (as it appears my XP system does)."
"If you're seeing this then you want to copy the following files from a Firefox installation:
Microsoft.VC80.CRT.manifest
msvcm80.dll
msvcp80.dll
msvcr80.dll
The patch I'm attaching updates our configuration files to specify the Win32 redistribution directory, which will then cause the build system to include the files in the build."
.... ends....
The earlier 2006 instances also had the same issue in some cases:
forums.frontmotion.com/viewtopic.php?f=10&t=393
Hope this progresses the search and resolution.
Cheers

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in

Hello! I have the Acrobat XI test version installed, got the registration Mail and confirmed it. When i have the program opened and try to convert the file from a pdf to a word and press the convert button, it shows a the message "application failed" (in german "Fehler bei der Anmeldung"). I hope have explained the issue on the right way with my bad english. Do you have a solution for it?? Best regards, Marcus Wenk

yes, you are right. it is the adobe reader via exportPDF. but it should be the acrobat. it was written on the internetpage...

Application failed codesign verification. The signature was invalid? Please help

Hi App developers
Has anyone got a solution to this error when using Application uploader to ituneconnect?
Application failed codesign verification. The signature was invalid, or it was not signed with an Apple submission certificate.
I've created new provisioning profiles and a new certificate but still get the same error.
Any help much appreciated.

Hi, I'm not sure which Adobe Forum you would need, but I don't think it's the Flash Player Forum. Go here to find the other Forums that may be helpful to you.
Use the drop down arrow at "Select Forum" http://forums.adobe.com/index.jspa
Thanks,
eidnolb

AIA Demo Application failed during Installation.

Hi ,
I am getting this error while Installing and Deploying AIA Demo Application(deployment script ant –f deployDemo.xml in command window).Please find the error message displayed on the command window.
D:\Devrep\Oracle\AIAHome\samples\AIADemo\config>ant -f deployDemo.xml
Buildfile: deployDemo.xml
InstallDemo:
[echo]
[echo] /------------------------------------------------------------\
[echo] ! !
[echo] ! Setting the environment to install !
[echo] ! AIA Demo !
[echo] ! !
[echo] ! Verify D:\Devrep\Oracle\AIAHome\aia_instances\AIA/logs/AIAdemoI
nstall.log !
[echo] \------------------------------------------------------------/
[echo]
[echo] /----------------------------------------------------------\
[echo] ! !
[echo] ! Installing AIA Demo !
[echo] ! !
[echo] \----------------------------------------------------------/
AID:
BUILD FAILED
D:\Devrep\Oracle\AIAHome\samples\AIADemo\config\deployDemo.xml:91: The following
error occurred while executing this line:
D:\Devrep\Oracle\AIAHome\samples\AIADemo\config\deployDemo.xml:123: The followin
g error occurred while executing this line:
D:\Devrep\Oracle\AIAHome\Infrastructure\Install\AID\AIAInstallDriver.xml:35: web
logic.security.internal.encryption.EncryptionServiceException: weblogic.security
.internal.encryption.EncryptionServiceException: weblogic.security.internal.encr
yption.EncryptionServiceException: [Security:090219]Error decrypting Secret Key
java.lang.SecurityException: The provider self-integrity check failed.
Please help me out how to resolve this issue.I had post this thread also last time but unfortunately I didn't got any response so far
Thanks
Biswanath

Hi
This is the location i am having my installation because in this location only MY AIA instance got created.
Here i am pasting my env variable setup in aiaenv.bat file
#set environment variables
set AIA_HOME=D:\\Soasuite\oracle\Middleware\SOASuite11gR1PS4\oracle_common
set MW_HOME=D:\\ORACLE\Middleware
set SOA_HOME=D:\\ORACLE\Middleware\Oracle_SOA1
set JAVA_HOME=D:\ORACLE\Middleware\jdk160_24\jre
set AIA_INSTANCE=%AIA_HOME%/aia_instances/AIAinst1
kindly help...

During Palm reinstallation, when reboots get errors, "The application failed to initialize properly (0xc0000142)" and "DeviceMonitor MFC Application has stopped working."

I'm trying to reinstall the Palm software because synchronization has been failing for the past two months. It get to the point of synchronizing the calendar and fails with the message that there are too many events. Hence, nothing in the process after that synchronizes. I've tried reinstalling the Palm s/w to no avail. Now I'm trying to uninstall and reinstall the Palm s/w only to be greeted with another error message when the system restarts (as part of the installation process). The error is, "The application failed to initialize properly (0xc0000142). Click OK to terminate the application." When I choose OK, I get the error, "DeviceMonitor MFC Application has stopped working." Windows does not notify me of a solution. Any ideas/solutions would be greatly appreciated!
Thanks,
Gina
Post relates to: Tungsten E2

Hello and thank you for using the Palm Help Forums!
You may need to do a clean uninstall of the Palm desktop software to resolve your issue.
Uninstall Palm Desktop by going to your Control Panel > Add/ Remove Programs > Remove Palm and/ or PalmOne
Delete the following folders:
C:\Palm
C:\Program Files\Palm
C:\Program Files\PalmOne
C:\Program Files\Handspring
From the Windows start menu, select Run.
Type Regedit and click Run or OK
*NOTE* BE VERY CAREFUL IN YOUR REGISTRY KEY EDITOR. IF THE WRONG THING IS DELETED THIS CAN CAUSE SERIOUS DAMAGE TO YOUR COMPUTER'S OPERATING SYSTEM.
Delete the following keys:
HKEY_Current_User\Software\PalmDesktopAutorun
HKEY_Current_User\Software\Palm
HKEY_Current_User\Software\Palmone
HKEY_Current_User\Software\U.S Robotics-- (check and make sure only palm related keys are under this one)
Delete this key as well:
HKEY_Local_Machine\Software\PalmSource
Close the Registry window
Restart PC upgrade to new palm desktop (by going to www.palm.com).
Post relates to: Treo 800w (Sprint)
Post relates to: Treo 800w (Sprint)

LR2: 1st Launch of Demo - The application failed to initialize properly (0xc0150004)

Hello all,
I've never used Lightroom nor had any need to really justify buying it when PS meets my needs, but thought I'd at least take a look at Lightroom 2 to see what it's like. Well, upon installing the trial to my Vista 64 system, the subsequent launch of LR2 only gave the subject "application failed to initialize properly (0xC150004)" error. I see no posts regarding this particular error, and Google searches only turn up that this error could be due to a wealth of things, inclusive of the usual talk regarding viruses or spyware.
Notwithstanding that I've got quite a number of applications installed, I keep my system relatively clean and do not suspect anything awry. Many speak ill of Norton products, of which I use Norton Internet Security 2008 and have had nothing negative to say about it...no issues from it with reagard to PS CS2 or CS3, so I'd expect none with LR2.
Oh...and as far as any departure from the default installation goes, I installed LR2 to a separate partition where most of my applications get installed, rather than to the system partition. Of course, that should be transparent and not matter.
I'm largely looking to see if there are any known obvious LR2 problems that might cause such an error to arise. If not, I'll just uninstall and forget about it. It's not worth spending too much time to resolve.
I have installed LR2 under the Windows XP/SP2 boot configuration of my system, using a separate installation path on my programs partition than used for the 64-bit version, and all looks to be working fine there. So, this may be more of an LR2 issue with Vista 64.
Thanks,
Daryl

Hi Ian,
Thanks, but no luck with that idea either. I know 32- and 64-bit O/Ses are different, but I largely expected LR2 to work with both my installations under Norton Internet Security 2008 since all else does. A leap of assumption perhaps, but at least this exercise suggests the problem is unrelated to Norton software. I disabled all services and startup processes for both NIS2008 and Norton Ghost 14, via msconfig, even uninstalled and reinstalled LR2 under those conditions, and the problem persists.
One additional thing I did observe, as I decided to monitor Task Manager while the LR2 installer ran, is that even after the installation completed and I left the box selected to launch LR2, the MS installer 'msiexec' did not close out. So, I rebooted and with no msiexece active in the list afterwards, again tried launching LR2 with no success.
The only thing I can glean from this is a similar issue I had with Raxco PerfectDisk 2008, which launched 3 instances of msiexec during its installation, and never closed those. If I killed all related processes and attempted to launch PerfectDisk, it would freeze up at the splash screen with those 3 msiexec processes active again. I sent in some detailed notes to Raxco support for some feedback and if they come up with anything to offer that resolves the issue, perhaps it will be related to why the LR2 installer also doesn't close, or can't close, the msiexec. Perhaps a problem unique to my Vista 64 installation in spite of all else working. As with LR2, PerfectDisk works fine under XP32.
Regards,
Daryl

The application failed to initialize properly...ctc

When i click on the flash icon i get the following message
the application failed to initialize properly(0xc00000005).
Click on ok to teminate the application.
i have uninstalled all flash programs, rebooted and
reinstalled and rebooted and still getting this message.
anyone have an idea how to cure it
thanks
bob
university of south dakota

Prefs: C:\Documents and Settings\Mike\Application Data\Adobe\Photoshop CS4. Anyway, I hope you are aware that your computer is an unsupported hardware, from processor to graphics card. I'm quite surprised that PS CS4 actualyl works on your system. The one thing of note in your specs is the virus scanner. Is it perhaps set a tad too agressively? This could have ill effects when PS writes the prefs on program exit. At any rate, try to delete the prefs (copy it to a backup location before, just in case...) . Have a look at whether your virus scanner has an eye on it or not. If yes, create an exclusion rule for the directory to prevent future damage. If the crash persists, then check your system event viewer and provide the info you find there. This might tell us a bit more about possibly damaged/ missing DLLs or incomaptible drivers that may be causing the crash. Memory addresses do usually not mean anything, unless you know the app inside out, i.e you are its developer, and know the actual state vs. the suppossed state. That's why nobody around here will be able to make sense of your initial post. I believe, though, the one you posted is merely the initial "app has initialized" thing, which even to a developer doesn't tell much.
Mylenium

The application failed to initialize properly (0xc0000006)?

The application failed to initialize properly (0xc0000006)
That's the message I get when I try to start my Photoshop Production Premium CS4. Nothing "happened", it was working yesterday and now it's not.

Prefs: C:\Documents and Settings\Mike\Application Data\Adobe\Photoshop CS4. Anyway, I hope you are aware that your computer is an unsupported hardware, from processor to graphics card. I'm quite surprised that PS CS4 actualyl works on your system. The one thing of note in your specs is the virus scanner. Is it perhaps set a tad too agressively? This could have ill effects when PS writes the prefs on program exit. At any rate, try to delete the prefs (copy it to a backup location before, just in case...) . Have a look at whether your virus scanner has an eye on it or not. If yes, create an exclusion rule for the directory to prevent future damage. If the crash persists, then check your system event viewer and provide the info you find there. This might tell us a bit more about possibly damaged/ missing DLLs or incomaptible drivers that may be causing the crash. Memory addresses do usually not mean anything, unless you know the app inside out, i.e you are its developer, and know the actual state vs. the suppossed state. That's why nobody around here will be able to make sense of your initial post. I believe, though, the one you posted is merely the initial "app has initialized" thing, which even to a developer doesn't tell much.
Mylenium

What does Application failed codesign verification. The signature was invalid, contains disallowed?

I was wondering someone could help me.
I'm already to upload my App, I thought I followed all the instructions and now in Application Loader it's throwing this error
"Application failed codesign vertification. The signature was invalid, contains disallowed entitlements, or it was not signed with an iPhone Distribution Certificate."
What does that mean and how can I fix it??
Thanks,
Michelle

Hi, I'm not sure which Adobe Forum you would need, but I don't think it's the Flash Player Forum. Go here to find the other Forums that may be helpful to you.
Use the drop down arrow at "Select Forum" http://forums.adobe.com/index.jspa
Thanks,
eidnolb

Application installation via OSD - Requirements fail

Hi there,
I have created an application in SCCM 2012 R2 and have this deploying successfully both via manual deployments and via the Software Center/Application Catalog... however recently it has stopped installing via OSD.
The application has been configured with a requirement type set to a specific Active Directory OU... After much testing I have found that if I remove this OU requirement type then it installs via OSD fine.
Can you please advise?
Here is a sample smstslog where the application fails to deploy (or rather fails to evaluate properly):
Installing application '[EXE]Symantec Endpoint Protection - x64' InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
GetAppMgmtSDKInterface successful InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Retrieving value from TSEnv for '_SMSTSPolicy_ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/Application_574002bc-db25-4c3e-ab86-5754e2887c6e' InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
::DecompressBuffer(65536) InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Decompression (zlib) succeeded: original size 1272, uncompressed size 10872. InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Found App policy modelname:ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/RequiredApplication_574002bc-db25-4c3e-ab86-5754e2887c6e and CIversion:8 InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Start to compile TS policy InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
End TS policy compilation InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Retrieving value from TSEnv for '_SMSTSCIVersionInfoPolicy' InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
::DecompressBuffer(65536) InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Decompression (zlib) succeeded: original size 9670, uncompressed size 114366. InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Looking for policy ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/RequiredApplication_574002bc-db25-4c3e-ab86-5754e2887c6e/VI in ts environment InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Found policy: ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/RequiredApplication_574002bc-db25-4c3e-ab86-5754e2887c6e/VI InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
ModelName = ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/RequiredApplication_574002bc-db25-4c3e-ab86-5754e2887c6e InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
ModelName = GLOBAL/MachineOU InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
ModelName = GLOBAL/Platform_Settings InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
ModelName = Windows/All_Windows_Client_Server InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
ModelName = Windows/All_x64_Windows_7_Client InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
ModelName = ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/Application_574002bc-db25-4c3e-ab86-5754e2887c6e InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
ModelName = ScopeId_419F6DC4-3122-4812-90FF-CE9531E6526A/DeploymentType_d3e81841-547e-40c8-bbd0-033f29fd8680 InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Start to compile TS policy InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
End TS policy compilation InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Get Install Directory for SMS Client InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Start to evaluate TS policy with lock InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Locked policy transaction lock successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Updating settings in \\.\root\ccm\policy\machine\actualconfig InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
RequestedConfig policy instance(s) : 425 InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine") InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
There is no ccm_policy_policy instance, skipping addition to realinst map InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
RequestedConfig policy instance(s) : 0 InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:HBM successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:HBM") AND (PolicyState = "Active") AND (PolicyType = "Machine") InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
There is no ccm_policy_policy instance, skipping addition to realinst map InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:HBM successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
RequestedConfig policy instance(s) : 0 InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
There is no ccm_policy_policy instance, skipping addition to realinst map InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
RequestedConfig policy instance(s) : 0 InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
RequestedConfig policy instance(s) : 9 InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
RequestedConfig policy instance(s) : 72 InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
There is no ccm_policy_policy instance, skipping addition to realinst map InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully InstallApplication 20/03/2014 12:37:53 3336 (0x0D08)
Total RequestedConfig policy instance(s) : 506 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Locked ActualConfig successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
New/Changed ActualConfig policy instance(s) : 5 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
[1] Added/updated setting 'ccm_applicationciassignment:assignmentid=dep-{ae430793-8ce6-44cf-9755-5bed25d772b6}-scopeid_419f6dc4-3122-4812-90ff-ce9531e6526a/application_574002bc-db25-4c3e-ab86-5754e2887c6e'. InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
[2] Added/updated setting 'ccm_civersioninfo:modelname=scopeid_419f6dc4-3122-4812-90ff-ce9531e6526a/application_574002bc-db25-4c3e-ab86-5754e2887c6e:version=8'. InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
[3] Added/updated setting 'ccm_civersioninfo:modelname=scopeid_419f6dc4-3122-4812-90ff-ce9531e6526a/deploymenttype_d3e81841-547e-40c8-bbd0-033f29fd8680:version=4'. InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
[4] Added/updated setting 'ccm_civersioninfo:modelname=scopeid_419f6dc4-3122-4812-90ff-ce9531e6526a/requiredapplication_574002bc-db25-4c3e-ab86-5754e2887c6e:version=8'. InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
[5] Added/updated setting 'ccm_scheduler_scheduledmessage:scheduledmessageid=dep-{ae430793-8ce6-44cf-9755-5bed25d772b6}-scopeid_419f6dc4-3122-4812-90ff-ce9531e6526a/application_574002bc-db25-4c3e-ab86-5754e2887c6e'. InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked ActualConfig successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked policy transaction lock successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
spNamespace.Get(L"CCM_Client=@", &spInstance), HRESULT=80041002 (e:\nts_sccm_release\sms\framework\core\ccmcore\util.cpp,446) InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
DateTime = "20140320123754.149000+000";
PolicyNamespace = "\\\\.\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 3332;
ThreadID = 3336;
InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Successfully submitted event to the Status Agent. InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
End TS policy evaluation InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Policy evaluation initiated InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Get Install Directory for SMS Client InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Start to evaluate TS policy with lock InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Locked policy transaction lock successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Updating settings in \\.\root\ccm\policy\machine\actualconfig InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
RequestedConfig policy instance(s) : 425 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine") InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
There is no ccm_policy_policy instance, skipping addition to realinst map InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
RequestedConfig policy instance(s) : 0 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:HBM successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:HBM") AND (PolicyState = "Active") AND (PolicyType = "Machine") InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
There is no ccm_policy_policy instance, skipping addition to realinst map InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:HBM successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
RequestedConfig policy instance(s) : 0 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
There is no ccm_policy_policy instance, skipping addition to realinst map InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
RequestedConfig policy instance(s) : 0 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
RequestedConfig policy instance(s) : 9 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
RequestedConfig policy instance(s) : 72 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
There is no ccm_policy_policy instance, skipping addition to realinst map InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Total RequestedConfig policy instance(s) : 506 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Locked ActualConfig successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
New/Changed ActualConfig policy instance(s) : 0 InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked ActualConfig successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Unlocked policy transaction lock successfully InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
spNamespace.Get(L"CCM_Client=@", &spInstance), HRESULT=80041002 (e:\nts_sccm_release\sms\framework\core\ccmcore\util.cpp,446) InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
DateTime = "20140320123754.634000+000";
PolicyNamespace = "\\\\.\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 3332;
ThreadID = 3336;
InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Successfully submitted event to the Status Agent. InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
End TS policy evaluation InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Policy evaluation initiated InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Query path = 'CCM_ApplicationCIAssignment.AssignmentID="DEP-{AE430793-8CE6-44CF-9755-5BED25D772B6}-ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/Application_574002bc-db25-4c3e-ab86-5754e2887c6e"' InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Verified policy is compiled in 'root\ccm\policy\machine' namespace InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Invoking App Management SDK to evaluate app polices InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
CAppMgmtSDK::EvaluateAppPolicy ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/RequiredApplication_574002bc-db25-4c3e-ab86-5754e2887c6e.(null) DCMAgent 20/03/2014 12:37:54 3336 (0x0D08)
App policy evaluation for application 'ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/RequiredApplication_574002bc-db25-4c3e-ab86-5754e2887c6e' has started. Please refer to DCMAgent.log for the details on this job. JobID='{A89BFBB2-00A0-4B19-868E-D2049BB3E90E}' InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/Application_574002bc-db25-4c3e-ab86-5754e2887c6e'='{A89BFBB2-00A0-4B19-868E-D2049BB3E90E}' InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
Waiting for installation job to complete.. InstallApplication 20/03/2014 12:37:54 3336 (0x0D08)
GetAppMgmtSDKInterface successful InstallApplication 20/03/2014 12:37:54 3352 (0x0D18)
CAppMgmtSDK::GetEvaluationState ScopeId_419f6dc4-3122-4812-90ff-ce9531e6526a/RequiredApplication_574002bc-db25-4c3e-ab86-5754e2887c6e DCMAgent 20/03/2014 12:37:54 3352 (0x0D18)
Passed in version 8 for ScopeId_419f6dc
I really hope you can help me with this?
Kind regards

I've created a function (vbscript) to get the FQDN of the computer...
WScript.Echo GetDistinguishedName()
Function GetDistinguishedName()
'Create return string and default it to empty
Dim sRetVal : sRetVal = ""
'Error checking off
On Error Resume Next
'Create an AD system info
Dim osSysInfo : Set oSysInfo = CreateObject( "ADSystemInfo" )
'Get computer object form AD
Dim oComputer : Set oComputer = GetObject( "LDAP://" & oSysInfo.ComputerName )
'Get FQDN
sRetVal = LCase( oComputer.distinguishedName )
'Error Checking back on
On Error Goto 0
'Return the result
GetDistinguishedName = sRetVal
End Function
...create a global condition for this and then you can use the "Ends with" eval rule to match your OUs as a requirement on the deployment type.
Thanks very much.. you star :)

So lately I decided I was tired of Tiger, and decided I would upgrade to Leopard. Well I made the mistake of erasing the hard drive before I made sure it would work. Well now like the installer was before it failed. And now when I boot it just won't work

So lately I decided I was tired of Tiger, and decided I would upgrade to Leopard. Well I made the mistake of erasing the hard drive before I made sure it would work. Well now like the installer was before it failed. And now when I boot I get the normal finder/question mark flashing folder. I also found a power Mac g4 that needs a new operating system. It's running 9.2. It's going to my grandma as a gift. I really need help.

I think you'll need to find a Retail 10.5 Disc.
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard

Application failed code signing verification. The signature was invalid

Hi,
Earlier we have created iPhone app with adobe air and uploaded it to iOS store. Now we have updated the app and used a new .p12 file and it is generated from a new CSR file and created the build. But while uploading the build from application loader it is giving the following error.
"Application failed code signing verification. The signature was invalid contains disallowed entitlements or it was not signed with an iPhone distribution Certificate"
With the same certificate file we have uploaded two more apps developed in HTML5, jQueryMobile and Phonegap. These apps should not effect while we upload the Adobe air iPhone app.
Please help us to fix the issue.

I am fairly certain the issue is you are submitting an update to an existing app with a new cert. The other apps work just fine because they are not updates, but new submissions to the app store. You will need to use the same certs that you used with the initial submission.

L'installation d'adobe application a échoué / The installation of adobe application failed / OK !

Similar Messages

Maybe you are looking for