L/R 4.2 and PS CS5 RAW plugin 7.2

Hi, I have L/R 4.2 and CS 5 installed but after update of Lightroom when I try to open a photo via "Photo Open in L/R 4.2" I get the message "This ver of L/R may require the Camera RAW version 7.2. Please update the Camera RAW plugin using the update tool.
Tried this but tells me PS & L/R 4 is upto date and RAW 7.2 is not compatable with CS5 as I understand it.
So should I Render using L/R, Open anyway or Cancel.
Seems wrong that I have spent good money on the software only to be told that if I want Camera RAW 7.2 I have to pay even more for CS6 that has no exta options over CS5 I will not need.
Thanks
Russ

russellsnr wrote:
So should I Render using L/R, Open anyway or Cancel.
Render using Lightroom is the only proper answer (either that or update to CS6) and ACR 7.2).

Similar Messages

Output sharpening in Adobe Camera Raw (ACR) and Photoshop CS5

Output sharpening in Adobe Camera Raw (ACR) and Photoshop CS5
I want to do two-pass sharpening - capture and output - with output capture done just before I print. I do the initial (capture) sharpening in the ACR Detail/Sharpening panel, with Amount slider set to, for example, 100. Then, I open the image to PS CS5 as a Smart Object, and use layers and masks for further editting.
My question is, can I go back to ACR for the final (output) sharpening pass? When I re-open the file in ACR, the Sharpening Amount slider is back to zero, but the other three sliders are still at the settings I used at the start of the process, i.e., the capture sharpening. If I again set the Amount slider to a positive value, then again open the image in PS for printing, will my second pass through the ACR Sharpening panel take effect - will it accumulate on top of the initial sharpening?
By the way, the reason I want do output sharpening in ACR rather than, say, PS Unsharp Mask, is so I can use the Masking slider in ACR, which is much easier than the comparable techniques available in PS. I am aware that some say you should not do any masking for the output sharpening. I'd like to though.
Thanks for ideas.

This is pretty much the way I do it, and I also always found ACR sharpening superior to anything in Photoshop. There is the "sharpen for output" in ACR, but you have little control over it.
The tricky part is feeding the file through ACR a second time. I don't think re-opening the Smart Object will do anything more than you could have done the first time. I do it with a rendered TIFF, and have an intricate set of actions that I run in the Image Processor Pro. It's a mess, and you don't want to know.
The frustrating part is how to action ACR. I just can't figure it out. It'll work, and then I have to change some setting and the action stops working. I suspect you need a script, but so far I haven't found any.
So I've come to a compromise: I first process to TIFF in a temp folder, then I bulk open them in ACR to sharpen, then a second process to finish up.
For less critical files I have a sharpening action that comes close, involving edge masks and blend ifs, using smart sharpen which tends to preserve edges better than unsharp mask, and with less accumulation of noise.
Bottom line: I'm also very interested in further comments to this. BTW, I recently bought Lightroom 4, so maybe there is a posibility using that in a mixed workflow.

I have a new pc and have installed (again) CS5, however I can not install the updates Adobe Bridge, Adobe Extension Manager, Adobe Photoshop (64 bit) and Potoshop Camera Raw.

I have a new pc and have again installed CS5 however and unfortunately I can not install the updates Adobe Bridge, Adobe extension Manager, Adobe Photoshop (64 bit) and Photoshop Camera Raw ?

Hi DerrylS,
I would request you to try the below mentioned link for Error U44M1P7:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
If problem still persist and as in log file it says "Exit code 7", kindly try below mentioned links.
Link 1: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Link 2: http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
Thanks!
Atul Saini

New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

Sounds like you somehow got the mac version.
Download the windows 6.7 camera raw update from this link:
Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

Photoshop Elements 9 and Adobe Camera RAW 6.6

My Significant Other just purchased a Nikon 1 V1 camera. I have an extra copy of Elements 9 that I can install on her computer. According to the Release Notes, support for the Nikon 1 V1 started with ACR 6.6. According to the same Release Notes, ACR 6.6 runs under Photoshop Elements 9.
"This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Photoshop CS5, Photoshop Elements 9 and Premiere Elements 9. "
and
"The Camera Raw 6.6 plug-in is not compatible with versions of Photoshop earlier than Photoshop CS5 or versions of Photoshop Elements earlier than Photoshop Elements 8 for Windows and Photoshop Elements 8 for Mac. "
The Photoshop Elements update page, however, suggest that ACR 6.5 was the last version of ACR that ran under Photoshop Elements 9. http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows
Which is correct, the Release Notes or the Update Page?

After you install photoshop elements 9 on the vista machine follow the steps below to install the camera raw 6.6 plugin:
1. Download the 6.6 DNG Converter and install the profiles:
   http://www.adobe.com/support/downloads/detail.jsp?ftpID=5310
2. Download the 6.6 camera raw plugin zip file:
   http://www.adobe.com/support/downloads/detail.jsp?ftpID=5316
3. Unzip the folder by right clicking on folder and choosing Extract All
4. Inside the extracted folder doulble click on the Payloads folder
5. Then double click on the CameraRawForElements6.4All-011211045300 folder
   (should be the second folder with a size of 16.0 mb)
6. Right click on the Assets2_1.zip and choose Extract All
7. Rename the file from 1002 to Camera Raw.8bi
8. Right click on the Camera Raw.8bi and choose Copy
9 Go to:
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 9\File Formats (64 bit vista)
or
C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 9\File Formats (32 bit vista)
10. Drag the old camera raw plugin to the Recycle Bin and right click in the empty space in the folder and choose Paste
Start the pse 9 editor and under Help>About Plug-In>Camera Raw should hopefully say version 6.6.

ACR and Nikon D800e Raw files

This discussion is actually a follow on to an earlier one where I thought the issue was resolved. I am using CS5 extended 64 bit with WIN 7 64bit and ACR version 6.7. I verified the ACR version checking for updates and was informed I am up to date. According to the ADOBE help site ACR v 6.7 is available to open Nikon D800e raw files. However when I try and open these raw files there is a message that the camera model is not supported. Any help on why the raw files cannot be opened with ACR 6.7 is appreciated.

Thanks Noel - after several hours of experimenting, I found the issue. I use a stand a lone software, Nikon Transfer, to download images to the computer. The software allows me to preview/select, rename, and make simultaneous copies for backup. This software has worked without issue, however when downloading images from the Nikon D800e, it does something to the raw files making them incompatible with ADOBE's ACR and even Nikon's ViewNX 2 software. Now here is the real curosity. When Nikon Transfer is initiated from within Nikon View2 software and not as a stand a lone, it works, and ADOBE ACR 6.7 can read the raw files. Again thanks for the help.

I upgraded my Mac Pro to Yosemite and now CS5 does not work.

Help.....Adobe Photoshop CS5 does not load now that I upgraded my MacPro to yosemite....anybody have this problem and how was it fixed?

Yes. The Yosemite upgrade is notorious for damaging CS5 installs. Please reinstall and let us know how it goes.
Also make sure Yosemite is upgraded to 10.10.1
The reinstall will set your instal to 12.0.0 If Help > Updates does not work, go here Adobe - Photoshop : For Macintosh
download and apply the updates for Photoshop and Adobe Camera Raw.
Gene

TIFF round trip between A3 and PS CS5

Hello, I have one question that's been bugging me for the last few days.
I set Aperture 3 to use 16 bit TIFF files for round tripping between A3 and Photoshop CS5. When PS opens it actually calls Camera Raw. I then open the file do the adjustments in PS and save the final image. However, when I go back to Aperture, Aperture does not update the preview of the final image. If I set Aperture to use PSD files the round trip works great, but with the PSD file I cannot invoke Camera Raw from within CS5 when using smart objects.
Has anyone experienced this before? am I doing something wrong?
Thanks!!!
Mariano

Photoshop in the normal course would not call Camera Raw for dealing with the TIFFs sent for external editing -- have you set something in Photoshop CS5 to cause all TIFFs to be opened that way?
Since Aperture adjustments will do everything the camera raw display can to in Photoshop, it seems little benefit would come from then using the camera raw display in Photoshop for anything coming from Aperture for editing?
I use TIFF as the format to send to PS CS5 for editing and all is working fine, btw.
Ernie

Updating Adobe Photoshop and Plug in Raw

Hi, I have Photoshop CS5 Ext ver 12.0 x64 and Plug in Camera Raw ver 6.7.0.339 working on Win 7 Home. The issue I have is that I cannot update Adobe PS CS5 and Plug in Raw in order to work with Raw photos from a Nikon D5500. All attempts to update fail. Many thanks for any help to update my Adobe software related to Photoshop and plug ins.

Please see this list for which minimum version of Camera Raw supports which cameras’ RAW files.
Camera Raw plug-in | Supported cameras
Nikon D5500 takes Camera Raw 8.8 which would need Photoshop CS6 or higher.
You could use the free DNG Converter.

Error in updating DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6)

When I tried to update DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6) in Adobe Photoshop I get the following errors in the error log:
DPS Desktop Tools CS6 32.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
Photoshop Camera Raw 8.7.1(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
I purchased Adobe Creative Suite with my Mac so I have an installed version. I have tried rebooting, but to no avail. When I search for help on the site, none of the help explanations fit (e.g., delete a folder that doesn't exist on my computer). I have a 27 inch iMac running OS X Yosemite version 10.10.1. Thanks.

Sscrase what specific error messages did you receive within the installation log files for the update? You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

Can only draw circle and square in Illustrator CS5 and Photoshop CS5

I am experiencing a strange bug that seems to be affecting both Photoshop CS5 and Illustrator CS5. In Illustrator, when I try to draw a rectangle or ellipse I can only draw circles and squares. Also I can't change the color of selected objects. When I try to change its fill nothing happens. I can also only drag objects on the 0, 45 and 90 degree angles. Also I can no longer select off an object by clicking on the artboard. When I click on the artboard nothing happens.
Similarly in Photoshop I can only draw straight lines using the brush tool. The marquee tool is also not functioning properly. When I try to use the marquee tool the marching ants form a square but when I release the mouse it selects a rectangular portion. Strangely if I use the marquee tool and make selection I can press the shift key and add to it but this second selection's marching ants are not square but are properly rectangular.
Since the problem seems to be affecting both Illustrator and Photoshop I'm thinking it's probably some kind of system conflict or perhaps an application running in the background is affecting it. Also if I restart my mac the problem goes away. Unfortunately the problem eventually returns.
Anyway I'm pretty sure most of the suggested fixes involve systematically going through all the programs running in the background and trying to determine which if any might be affecting Illustrator and Photoshop but I just thought I'd post something in case someone else had the problem or knew of any fixes.
I'm running CS5 on a MBP.
Thanks!

Ok I figured out the problem. It was another application called teleport which lets you control 2 macs with one mouse. It requires a hot key and in my case that was the shift key. Even though it was running it was still affecting me. Had to quit it and restart. If you're having a similar problem I'd check to see you're not running any other applications that can be activated with a hot key.

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

If you do not own a license for CS5 there is not much you can do to get it thru Adobe. They only sell current versions of their software (CS6 or Creative Cloud). You would need to find a third party vendor and take your chances with them.
If you do own a CS5 license you can download the software thru the following page and use your serial number to activate:
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

You are right, Adobe does not support CS5 because it is no longer sold.
Simply download the trial version of CS5 from this Adobe web site and input your serial number.
Adobe - Photoshop : For Macintosh

Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?

I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750! Can I update ACR?
I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
Thanks,
Greg E

You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

L/R 4.2 and PS CS5 RAW plugin 7.2

Similar Messages

Maybe you are looking for