L&T not seeing AVCHD footage from Panasonic SD9

Hi, all,
I have a Panasonic SD9, with which I've shot several hours of footage. I've made disk images of all the cards, and they're on an external GRaid HD. I'm running an 3.06 GHz iMac Intel Core 2 Duo with all the latest updates to both Leopard and FCP (6.0.6). I've also got Perian installed.
My issue is this: When I open Log and Transfer, FCP doesn't see any footage on the disk images (or off the camera when I attach it directly). No clips appear in the window. I know that they images are correct, because I've transcoded the same footage using my laptop without issue.
An additional tidbit is that about 5 minutes after I open L&T to try to transcode, FCP crashes. It happens every time, regardless of whether I leave the window open or not.
I've turned Perian off and on. No luck. I've deleted all preferences. No luck. I've reinstalled FCP. No luck.
Thanks in advance for all of your thoughts and suggestions. Here's to hoping we can figure this one out.
Best,
Paul

Do you have an old version of [FX Factory|http://www.noiseindustries.com/support/fxfactory201> installed of which you are not even using.
Either uninstall it or [install a newer version|http://support.apple.com/kb/TA25088?viewlocale=en_US].
http://www.noiseindustries.com/support/
G.

Similar Messages

Log and transfer footage from Panasonic GH1 into FCE

I have already read the few threads discussing importing AVCHD video from the Panasonic GH1 camera into FCE. I was expecting that the 1080x24 (wrapped in 60i) would import OK but the 720x60p would not. However, so far, I have had both formats import using the log and transfer just fine. These have been only short clips roughly a minute or less in length but no sign of FCE crashing when importing the 60p footage.
So, is this considered normal or has something in the most recent OSX updates fixed this FCE capability?

The program is usually able to ingest 24p and 60p footage fine, but upon exporting it will be conformed to the frame rate of your sequence. Since FCE doesn't support custom sequences all exported movies are either in 29.97fps or 25fps. Problems also sometimes arise where the program interprets your footage as 29.97fps instead of what it actually is, causing the audio to drift a bit as well.
Better to stick to what the program supports: 50i/25p and 60i/30p. If you need the functionality of 24p or 60p you should upgrade to Final Cut Pro.

Want to import avchd footage from a media card into FCE.

Trying to import avchd video from a media card into Final Cut Express. Panasonic DMC-ZS3 / FCE 4.0.1 / MBP 10.6.8. Have taken a look at the footage using a trial version of Pavtube MTS Converter.

A further comment : this is AVCHD Lite, and there are several online recommendations for software to convert files for Mac. Any suggestions??

HT200199 Still not seeing AVCHD in Aperture 3.3

I upgraded to 3.3, but I still do not see my AVCHD files when I try to import them (Canon m2ts files). I tried changing the file extension to mts or m2t, but no luck. Clips are not 1080p60 or 1080p50. Any ideas?

I have some AVCHD files captured on a Sony RX100 at 50 frames per second because I want the option to slow the clip to 25fps for smooth slow motion.
While Aperture does appear to import these (I suppose unorthodox for Aperture?) 50fps files, I am unable to do anything with them:
A quick look at the file info related to an "MAH03115" for example, indicates it is a 22.6 MB MP4 file that Aperture describes as "Unsupported Video Format".
Aperture suggests I open these files in Quicktime Player so I tried this and discovered I can export from Quicktime to 1080p, 720p etc. and import these back into Aperture. Seems a roundabout way to get things done.
The above seems aroundabout way to get clips into Aperture then it's a one step process in rival Adobe Photoshop Lightroom:
Just an aside: Are their rumours of Apple's intention to merge FCPX and Aperture into one application?
I suspect exporting at a lower quality format recognised by Aperture may be the answer, for now, but I'd be degrading existing files and wasting a lot of time.
It is especially frustrating as Lightroom had no problem importing similar clips shot at 50fps or in non-DVD non-Bluray formats available on the Sony RX100. Very straight forward. No extra steps necessary.
Lightroom feels a bit "busy" or cluttered for me and I found putting slideshows together more cumbersome than in Aperture. I am also more familiar with building photo books in Aperture and this feature also looks a bit cumbersome in Lightroom.
I switched from Aperture to Lightroom (with Premiere) and back to Aperture again because the Apple fiels (the photos/videos) and applications appear to be more seamlessly integrated and accessible... mostly.
When I was using Adobe, I had to export files (to the desktop) from Lightroom and import them into Premiere. Maybe I should have been using bridge.
I also felt Lightroom and Premiere slideshows were cumbersome and did not even try making photo books in Lightroom because it appears less intuitive.
Any tips appreciated. Many thanks.

Can not see running jobs from, package

I have a problem with processing parallely runing jobs:
I am creating another immediately runned jobs in a main job. Those two parallel jobs (2 loads from different databases) have to be finished before I run next operation (working out loaded data). Problem is that, after starting those 2 parallel jobs, I can not see them by select from ALL_SCHEDULER_RUNNING_JOBS that is executed immediately after I create those jobs in a package. If I take a look into ALL_SCHEDULER_RUNNING_JOBS from anonymous statement I can see all my running jobs. Let's sum it up:
1/ Start of main job
2/ Running 2 immediately created jobs (load data)
3/ Checking in loop if jobs created in step 2 are still running
3.1/ Jobs are running (ALL_SCHEDULER_RUNNING_JOBS check) - sleep for a
while - It never happens - can't see any running jobs from select executed in
package but can see them in
anonymous statement
3.2/ Jobs finished - start processing loaded data
Can somebody help me with this task?
Thanks alot!
Jakub

Hi,
There is no reason a job should be visible from an anonymous block but not from inside a job. There are two things that may be happening here.
- jobs scheduled to run immediately my not start running as soon as they are created/enabled, you may need to wait a bit before they start running (they will appear in all_scheduler_jobs immediately but maybe not all_scheduler_running_jobs immediately)
- you may be running into privilege issues. Is the user that executes the anonymous block the same as the user that the job is running as (the job's schema) ? If not maybe the job user does not have privileges to see the job (you can grant alter on the job to the user to ensure this).
Can you see the jobs in the all_scheduler_jobs view from within the job with status RUNNING ? If you can see jobs in all_scheduler_jobs as RUNNING but not in all_scheduler_running_jobs then this is a bug of some sort.
Thanks,
Ravi.

Do not see my ohotos from Iphotos in Imovies

Hi,
I do not see the latest photos stored in IPhotos from the window in Imovies. If I create an album, I see the album, but not the photos within the album. How should I proceed ?
Nicolas

That is correct.
You get one download of audiobooks.
If you want them on your computer, you will have to transfer them from your ipad.

FCP 7 - I can hear audio but not see the footage in the viewer or canvas

Ive had a few problems with my final cut. Im working off my laptop with a monitor. My immediate issue is that I have been editing fine this morning and then all of a sudden I could hear the audio for my clips but I can't see the footage in the viewer or the canvas. I can double clip on each clip individually and see what the footage is however. I've shut my computer down a few times and its not fixing itself. Also a lot lately when I sit down to do some editing the footage flickers on one clip and wont proceed to the next clips footage but I can still hear the sound. I would LOVE some help with this if anyone knows whats going on? Sascha

#15 White or Black Canvas or Viewer
Shane's Stock Answer #15: White or Black Canvas or Viewer
Make sure the canvas or viewer are selected then go to VIEW>CHANNELS and set it to RGB. It might be set to ALPHA.
OR...
Click on the drop down menu above the Viewer or Canvas and make sure that you are on IMAGE or IMAGE + WIREFRAME.

HT204088 I do not see any email from Apple for a purchase that shows up on my credit card. How can I get a credit for a charge I see do not see in my history but shows up on my cc?

I do not have an email from Apple for a charge that shows up on my credit card statement. I also do not see a charge in my history for this amount. How can I dispute the charge?

If nothing shows on the purchase history on your account, and you only have the one iTunes account that the card has been linked to and it's not a temporary store holding charge (you haven't changed your card details on your account ?), then you can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption.
But if nothing shows on your purchase history then you should also consider contacting your card issuer.

Not seeing any apps from ipod using windows 8

I am tying to backup my ipod into itunes and when it says that it it synced I do not see any of my apps listed in itunes. I still see everything on my ipod.

Go to Settings, General, Reset, Reset Network Settings. You'll have to reenter your network login info, but it should work after that.

Problems importing AVCHD clips from Panasonic GF1

I'm having problems importing clips from my new Panasonic Gf1. FCE (4.0.1) sees the device ok, and selecting and previewing the clips in the log and transfer window works fine, but once the clips are in FCE (converted to AIC) they play fast in the viewer or when placed in the sequence. Strange, because they play fine in the preview window before importing. Tried this in iMovie 08 and get the same effect.
I'm can convert them Toast to AIC and they work fine when imported to FCE but this is not my preferred workflow.

I tried using Toast Titanium 10 for conversion as suggested but there was a slight issue with synch of video and audio. So I downloaded and bought Voltaic HD as suggested elsewhere and the AVCHD files of the Panasonic GF-1 are now playing in Final Cut Express 4 without issues - I am editing with no problem. Given that I can use the Log&Transfer Window (Final Cut 4) for my Olympus EP1 and my Panasonic HD video cam, it's odd that the files of the Panasonic GF-1 don't work in Final Cut (yet), but at least I am back editing. Voltaic HD was $35, a doable expense.... it does work flawless (so far).

FCPX not reading AVCHD files from DVD

Hello to all,
I had made AVCHD disks of my Sony handy cam's footage using PMB [picture motion browser]. But when I tried to import these files from the DVD, FCPX would not accept these MTS files. Is not FCPX meant to deal with AVCHD?

Thanks for the info. The site you referred to has this:
'a user can burn 1080p60 video to Blu-ray or DVD after converting to 1080i'
I remember PMB allowed users the choice of making AVCHD disks or [?] MPEG2 disks. I have just now inserted the disk I had burnt and got this info:
Next I opened the disk and got this info from one of the MTS files:
The description of the file states it to be: AVCHD MTS
So why is it that FCPX is not able to ingest this AVCHD MTS file?

Other user can not see the data from the workbook

Hi Friends,
I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
Any body happen to know the cause or has some ideas on this issue?
The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
Thank you very much,
J.K

Hi All
The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
GRANT SELECT ON SYS.V_$PARAMETER
GRANT EXECUTE ON SYS.DBMS_JOB
The user will also need to have these grants:
CREATE PROCEDURE,
CREATE TABLE,
CREATE VIEW,
EXECUTE ANY PROCEDURE,
UNLIMITED TABLESPACE on user's tablespace
My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
http://learndiscoverer.com/books/books.htm
The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
Collect Query Statistics
Item Drill
Drill Out
My advanced VIEWER has this additional privilege:
Save Workbooks to Database
My basic PLUS user has all of the above, plus these (pardon the pun):
Create/Edit Query
Create Link
and my advanced PLUS users get everything, which means they now get these as well:
Grant Workbook
Schedule Workbooks
I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
I hope this helps
Regards
Micahael Armstrong-Smith

Can you edit AVCHD footage from a DSLR in Final Cut Express?

We're planning on using a DSLR that shoots AVCHD video as a B Camera on a shoot that will be edited in Final Cut Express for posting on You Tube. Will this work in Final Cut Express?

Yes, provided you convert the video to QuickTime/Apple Intermediate Codec before importing it into FCE.
Many users like MPEG Streamclip for this purpose, and it does a great job.
If you are using a Canon DSLR there is a plugin for Final Cut Pro but not for Final Cut Express, so you have to convert the video yourself before importing into FCE. (In Final Cut Pro, the EOS E1 plugin allows you to directly Log & Transfer from the 5D and 7D).

Can't import AVCHD footage from my canon HG10 camcorder

I have a Canon HG10 that shoots AVCHD high def footage. I've always gotten it to import footage into final cut pro 7 and iMovie (before switching to osx lion) Now that I have final cut pro X, I try to add the camcorders files into the import bin and it gives me an error saying the following:
"AVCHD" contains unsupported media or has an invalid directory structure.
Please choose a folder whose directory structure matches supported media.
I tried the "log and transfer" in the old previous version of final cut pro (which always worked for me before installing lion) and it also gives me an error. Same thing with iMovie now.
Is there some way I can get this to import into final cut pro X? If not, is there any other 3rd party transfer program or any other solution to get my footage onto my hard drive to edit in final cut pro X?
Any help would be appreciated. Thanks!

Okay, so I made a disk image of my camcorders hard drive. I mounted the image and tried importing the archive. It still does the same thing. Let me also clarify one thing. Only when I click on any folder contained in the image does it give me the error message:
"AVCHD" contains unsupported media or has an invalid directory structure.
Please choose a folder whose directory structure matches supported media.
When I click on the actually disk "CANON_HDD" it appears in the import window for a half second before dissapearing. Sorry, I didn't mention this earlier. Can anyone please give me a solution for this?

I imported my Favorites from I.E., but when I add a new Bookmark in Firefox, I do not see my folders from I.E.

I can see my imported Favorites in the Bookmark Menu but when I go to add a new Bookmark I can't put that Bookmark directly into a folder that I imported. Looks like I have to create a new folder every time for each new category.

Your imported bookmarks from IE should all be in one folder named "From Internet Explorer". The imported Bookmarks are kept separate for easier identification by the user. You can move them to other folders outside of that folder if you wish; you can also delete any duplicates that you may have placed into Firefox Bookmarks/folders before the import.
*See --> [https://support.mozilla.com/en-US/kb/Importing%20favorites%20and%20other%20data%20from%20Internet%20Explorer Importing favorites and other data from Internet Explorer]
For other Bookmarks info and links:
*See --> [https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks How do I use bookmarks?]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

L&T not seeing AVCHD footage from Panasonic SD9

Similar Messages

Maybe you are looking for