L_TO_CONFIRM - TO for Confirm an HU into another HU

Hello,
I would try to replicate through FM the following situation that I can create (do) withstandard transactions
LT01 - LT12: Confirm a WM HU within another HU.
I have 2 source HU WM within the same bin block location , the same batch, same qty, all equal.
I Create with LT01, a TO with generic TMV 999, qty sum (QTA1 + QTA2) of the two source hu and I specific that the destination HU NLENR and NLQNR must be one of the two source HU that already exists in warehouse (finding on LENUM AND NLQNR in LQUA) .
When I confirm the OT created with LT12, I go on confirm internally, do 'X' on Confirm and insert the other source HU (not inserted as NLENR) then 'fetch in foreground' and save .
The result is that I have a only HU now with both quantities.
I tried to replicate L_TO_CONFIRM, CONFIRM_TO but I can not find the right configuration.
The OT created with LT01 is the same of L_TO_CREATE
Do you have tips?

Hi Rohit,
Can you tell me how u used this FM and what field should be filled.
Kind regards,
John Nijburg.

Similar Messages

I have a question that I think I know the answer to, but am looking for confirmation. I have a dell computer at home that has clip art available on it for putting pictures into documents. Do I need to install an APP to get something similar to clip art?

I have a question that I think I know the answer to, but am looking for confirmation. I have a desktop computer at home that has clip art loaded onto it. I recently got an iPad and am looking for something similar. I assume I need to get an APP for it, and if that is correct, does anyone have one that they like?

Sort of. There is an app called art shop that gives you a place to park clip art. But I don't think you really need it.
If you have a collection of clip art you want available, move it to the camera roll on your pad/ phone, then copy paste into your document the clip you want.
You can get them into the camaera roll by putting them in a single event in your picture library and syncing them over, or e mail them to your self, and save to the camera roll, or send them to drop box, and bring them down that way.
The challenge is getting them all in one place to make it easy for you to find, which is why syncing might be the best approach in the long run.
As near as I can tell there is not a ready made clip art collection in app format laying around.

Images I move from one folder into another are disappearing, at first it was occurring immediately if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location.

Images I move from one folder into another are disappearing, at first it was occurring immediately and only if I did not copy and paste the images. Today however I found out that images I had been using for days just up and vanished from their new location. A few of these images had copies in another folder that remained and the ones I couldn't find may or may not have ever had copies. I had backed up my system with time machine recently as well, so I went into the backup to retreive the lost images. When I searched and found the backup copies I got the error "the file alias cannot be opened because the original cannot be located". The crazy thing is that the images that remained on my computer did not give me the same error and opened like they should.
In short images that I am creating, saving, and using are disapearing so epically that even time machine versions are affected when retrieval is attempted. Any suggestions as to what I could be doing wrong without realizing it? Or perhaps other people have had similar bugs that are software related and have a solution?

Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best

SSRS How to pass subtotal value in matrix into another table just for display?

Hi all,
I have two matrix with subtotal for two grouping. I need to pass the value of this two group subtotal into another matrix table to display and perform simple calculation to get the differences.
How can I pass the subtotal amount into the other matrix?
In Crystal report I can define two variable where i can set the total to the value and call the two variable anywhere in the same report. But how can I do it in SSRS?
Appreciate can help
Thank you

Yes, basically both are same grouping, i just want to capture the subtotal for comparision with scenario 2.
I can do it in SQL, but if possible, I hope to do it in report. Thank you
Simulation as below
Matrix for scenario 1
Group 1
Detail
Detail
Subtotal Group 1
9999
group 2
Detail
Detail
SubTotal Group 2
8888
Matrix for scenario 2
Group 1
Scenario2
Scenario 1
Differences
Detail
Detail
Subtotal Group 1
2000
9999
2000-9999
group 2
Detail
Detail
SubTotal Group 2
3000
8888
3000-8888

After I have migrated a 'master' profile into another, the browse button (for a download location) in Options, General doesn't work anymore. How can I fix this?

Hi Supporters,
I've been struggling with this some time (downloading / saving problems) and tried all kinds of variations. But I'll keep it simple for now.
As a test .. I've just created a fresh firefox profile. Checked out if could change the download location, through the Browse button, and indeed that worked. I got an explorer dialog to choose a folder.
Normally I would do the options, manage the search engines, do some layout stuff etc etc in order to get some 'baseline / master' profile I can evolve further into other more extended profiles. So you see this master profile will get copied into another one.
But, having copied that fresh profile (having done nothing yet) into another seems to disable choosing another download folder. The Browse button in Options > General does not work anymore.
There's more. If I browse to, say, C:\ as default download location but then enable 'ask me where to save ..' in the fresh profile and then copy this profile to another one .. if I then want to change the download location (which shows C:) it jumps to Desktop and again the Browse button won't work.
This is driving me mad. Any ideas? Sorry for the long story, hope it helps.

Hi guys,
@cor-el: getting rid of not needed parts is what I always do. Besides prefs and localstore, only the search-metadata and permissions / signons are passed along. Oh, forgot to mention the mimetypes.
No, my point is why is FF looking for those folders when there's no mentioning of these to be found in my options? Not even in de about:config ... When I state C:\ as my downloads location it's absurd to check any other folder first, which FF seems to do before giving me an explorer window showing .. C:\ as a starting point. Like my unrestricted laptop does.
@jscher2000: Even if there are pointers to those default folders, FF should not be checking those. When I state C: I mean C: (see my answer above).
No, I'm convinced this is a bug unless someone knows a way to stop that folder checking. And to be honest, the not working Browse button is the least of my problems (I use: ask everytime where). No it's the saving that is the problem. But I guess the underlying problem is the same. Saving / downloading, what's in a name ..
Guys, thanks for your help ! I can't fix a bug so I'm going to let it be. I'll rebuild my master and will keep checking of saving a website becomes a problem somewhere. Mind you, the solutions offered in kb.mozillazine.org/Unable_to_save_or_download_files didn't work.
Oh well, I'll keep my fingers crossed :)

Function module for transfering a file contents into another?

Hi all,
Is there a Function module for transfering a file contents into another?That is the whole content from a file to other??
Regards,
Shashank.

Hi,
I think there is no such FM. You need to read the data in internal table and then write it in another file.
Regards,
Atish

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

How can I swap or cut & paste a head from one photo into another for a holiday photo using aperture or photoshop?

I've got an almost perfect family photo that I need to swap one face in as my son was not looking at the camera and I can't redo the shoot. Anyone know how to take a headshot from one pic and swap it into another using Aperture or Photoshop? Thanks!

select the head with one of Photoshop's selection tools
When doing this, I find it quite helpful to create an intermediate image with a transparent background that contains only the head to be pasted into the second image. First I paste the head onto this transparent background, scale it, rotate it or skew it to make it fit into the other image, adjust the lighting, then select it.
To be able to paste the head seemlessly into the second image (and without aliasing effects), I make the border of the selection soft (⌥⌘D); my Photoshop has a german interface, so I am not sure about the english localization, this command must be something like "selection -> modify selection -> soft border".
I would not bother to get the lighting and color excactly right in Photoshop, that is far easier with the "dodge" and "burn" brushes and color adjustments in Aperture.
To do this completely in Aperture, you would have first to combine both images into one (for example by creating a book page), then use the retouche->clone tool to stamp the head from one image to the other. I use this occasionally to stamp a face into a flower bud or for similar effects. However, for this to work you need a plain background and nearly circular shapes to be pasted.
Léonie

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

Sign out of one itunes account and sign into another seperate account on same macbook. Cannot access itunes library for 2nd account

Sign out of one itunes account and sign into another seperate itunes account on same macbook. Cannot access itunes library for 2nd account. How do I do this?

iTunes account is not the same as iTunes library.
iTunes account is what you use to purchase from iTunes.
iTunes library is what is on your computer.
You can have items from multiple iTunes accounts in one iTunes library.

Looking for a way to move entire pages from one photo book into another photo book.

I haven't found out how to move pages from one photo book into another. Surely this is possible?
Also on the subject of photo books: it seems that it is not possible to enlarge the size of a text box. Or has anyone found a way to accomodate more than 1 line of text on a photo book page?

You can look through some of the different Layouts available.
Select your page.
Click the "Layout" icon on the lower right hand of the application window.
Above it will appear a "BACKGROUND" section and a "LAYOUT" section.
Immediately below the "LAYOUT" is a drop down menu which will show you all the different options.

How can I get the value for static content of 1 jsp into another jsp

Hi, I have a jsp which have a header ,now i want this header value in another jsp dynamically.Can u tell me how I can do it?

What I want to know is that , is it possible to get the value of a static content of one jsp into another jsp,something like getParameter() method that we use to get the value of a field in the jsp to a servlet,or to another jsp,the only difference here is I do not have a field here but a static jsp content .

How to move an icon from one Pic into another Pic?

Hello,
I haven't seen this question addressed so forgive me if this was already discussed.
I like to know how I can place a small smiley icon (pic) into another existing photo. In Photoshop Elements (be it 4.0 or 6.0) if I drag the the picture into Elements, it shows up and place it in the project bin. Here's the problem, when I drag the smiley icon onto the picture (which is already shown in Elements) it creates another window for the smiley icon and project bin instead of affixing itself onto the pic.
Yes, I can use Ctrl-A to copy the smiley face and then drag it onto the pic. But when I use Paint.net (a free program) it does exactly that asking me to confirm that I want to create a new layer. The difference is that with Paint.net I can drag 2 pics from the desktop and add them together within seconds. With Elements I have to do an extra step and, this extra step just seems unnecessary.
Is there a way to simply drag the smiley face onto the pic without creating another window (using Elements)?

http://i11.photobucket.com/albums/a154/eastcoasthandle/3.jpg
http://i11.photobucket.com/albums/a154/eastcoasthandle/4.jpg
These 2 pics should further show/explain what I am talking about as I am not sure of the proper name for this process.

How can I drag and drop a Tidal job into another group?

How can I drag and drop a Tidal job into another group? In Tidal Help, it says-
In the Jobs pane, press and hold the Ctrl key and at the same time right-click and either individually select individual jobs within a job group or drag your mouse cursor over a block of jobs that you wish to select. You can only move multiple jobs between job groups if the jobs being moved are on the same level.
Keeping the right mouse button depressed, drag the cursor to the job group that you wish to move the jobs to and release the mouse button.
When moving jobs from one job group to another, you must decide if the moved jobs keep their original job group attributes or assume the calendar and agent characteristics of its new job group.
A confirmation dialog, offers three inheritance options for the jobs moved to the "new" job group parent. Select one of the following options:
However, when I attempt to follow those instructions, it doesn't work at all and there is no indication that it's even trying (i.e., I don't see the selected job following my cursor at all and all I get is the normal menu when you right click anywhere on the screen.)
Is there another way to do this or is there a master setting that needs to be changed so that ability is enabled?
Thanks.

Go into edit mode for the job group group and just manually edit the section for Parent job/Group.
Cheers

My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

Hello ashbyy123,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario

L_TO_CONFIRM - TO for Confirm an HU into another HU

Similar Messages

Maybe you are looking for