L1 not updated properly when retro via oper GOTC

Hi gurus
Weu2019re running rptime with creation of time tickets to L1.
Has worked fine until weu2019ve put into the schema a retro evaluation via
rule TP07 and oper GOTC.
After that we donu2019t get sync between WST and L1 on the day from which
the retro is taking place.
Anyone experienced the same?
-and found any solution?
Regards søren

I think you are missing something.
All my testing shows that when the jnlp file has an href,, a HEAD request will be made to the href to check if a newer jnlp file exists on the server. This is confirmed with all recent versions of Java Web Start.
Are you shure that you are handling the timestamping correct for HEAD requests made to the server ?
/Andy

Similar Messages

Music does not sync properly when updated to latest version. Can see computer but can't play from ipod

Music does not sync properly when updated to latest version. Can see on computer but can't play from ipod.

Hope this helps...
I was having the same problem where only 1.7GB of 10GB of selected music would sync so I decided to start fresh. The following steps worked for me:
1. Open itunes and connect iphone 5 if not already. Uncheck all playlists, artists, etc. till nothing is checked to sync. Then uncheck the sync music box so that all music will be removed from the phone. Sync iphone
2. Eject device. Quit itunes (don't just close). unplug iphone.
3. Restart imac, macbook, or PC.
4. Restart iphone.
5. Now after power up, restart itunes then plug in iphone, check sync music and select music to sync. Sync iphone
6. It worked for me!!! Good luck.

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

[svn:fx-trunk] 13299: fix the _rb swc so that it updates properly when changes happen - update=" true" so that it will compile correctly when using locales

Revision: 13299
Revision: 13299
Author:   [email protected]
Date:     2010-01-05 19:07:45 -0800 (Tue, 05 Jan 2010)
Log Message:
fix the _rb swc so that it updates properly when changes happen - update="true" so that it will compile correctly when using locales
QE notes: ensure it contains a catalog.xml file, a swf, and a locale directory with properties file
Doc notes:
Bugs: https://bugs.adobe.com/jira/browse/SDK-24802
Reviewer: pete
Tests run:
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24802
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/build.xml

I've dropped my guard before with the security and I had so much trouble with my computer because of all the people trying to attack my computer I just can't take the chance again. www.MySafetyGates.com

HT201210 hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me :)

hi i just bought my new iPhone 4s yesterday and when u opened it was not updated so when i tried SO MANY TIMES to update it on the devise and on my new mac it said that there was a unknown error please help me

Please tell us what kind of computer you have, what operating system and what version of iTunes. Not just "the latest version of iTunes", the exact version number.

Shockwave will not update properly

Hi. I have a laptop running Windows 7 Home premium, 64 bit system.I use IE and just installed Firefox, as well. I tried to update Shockwave so I could continue to play my UClick jigsaw puzzle game, and my computer says it installed successfully, but it will not work with my jigsaw puzzle. I have uninstalled it and tried to reinstall it, but no change in response. When I try to open jigsaw puzzle, the Adobe Shockwave loading graphic appears, but nothing happens.
Help!

I understand the two sites are using different plugins/players. I'm not an idiot. However as Shockwave for Director is so old it's listed by Firefox as an unknown plugin and described as being a Netscape plugin ("Adobe Shockwave for Director Netscape plug-in, version 12.1.5.155"), I am merely suggesting that UClick might change to a more recent, robust plugin.
From: SeanWilson <[email protected]>
To: RB Jones <[email protected]>
Sent: Sunday, March 8, 2015 2:34 PM
Subject: Shockwave will not update properly
Shockwave will not update properly
created by SeanWilson in Adobe Shockwave Player - View the full discussionThose two sites use 2 completely different plugins/players to view their content — one being Shockwave for Director, the other being Flash so "just changing the call" won't work. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7265858#7265858 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7265858#7265858 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Shockwave Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

My macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing.

my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing

Gray, Blue or White screen at boot, w/spinner/progress bar

Swf is not working properly when upload to server

I develop 1.swf which is having 3 buttons each one having
anather .swf to call 2.swf, 3.swf respectively.
This application is running perfectly on my PC, but
While uploading the swf to server the 2.swf and 3.swf is
not running. Can any one tell how to recover from this kind
of problem.

justbipin wrote:
> basically my code working perfectly,
> but its not working properly when upload to server
> can anybody having any ref. or link to solve this
issues.
why is that we insist on seeing the source file ?
There is no one way of doing things in flash and no one can
help
you based on "does not work description".
This is way to broad of a subject to even try to guess.
Same as asking "my car does not work, what's up with
that"....
Please upload the problematic file and provide url for us to
check.
Otherwise you need to try to troubleshoot it yourself as we
can't
guess from here what possibly is wrong with that file.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

PDF file is not created properly when I choose File- Print...- PDF-- Save as PDF

PDF file is not created properly when I choose File->Print...In dialogue box if i select option Save as PDF under PDF button...But it works fine with Safari Browser..
== This happened ==
Every time Firefox opened
== always

My first thought is to make sure the fonts used are common. If there is a substitution, things will be off.

Stationary credated in Mail does not appear properly when viewed in Outlook, is there aroundthis?

Stationary credated in Mail does not appear properly when viewed in Outlook, is there around this? Or, can I export (as a PDF) the email drafted in Mail with stationary that does not have the meail info on top of the page . Thanks so much for your help.

No real solution to problem 1, stationary tends to look different depending on the client, as for 2 Mail does not export to pdf but can print to pdf, however you still get the mail headers.

TS1630 My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

You might like to define "not working properly".

Application does not work properly when I press a CommanButton

Hi all, I am having a problem with weblogic 10.3.5.
It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
How I can solve these problems?
Thanks.

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

L1 not updated properly when retro via oper GOTC

Similar Messages

Maybe you are looking for