L10-103 WLAN doesn't work/update does not work!

I have tried to upgrade my intel 802.11bg WLAN but on te setup there is a message : file not found "setupWLD.ini" and setup is aborted!
My Wlan does not find my wireless accesspoint, I have to use an USB WLAN to get access! (SITECOM WL 114)
Anybody can help me? Michle

Hello Michle
Its seems that is a problem with the installation. Maybe you installed a wrong driver?
I found two different wireless drivers for this unit.
1.)Intel Windows XP 9.0.1.9
2.)InProComm Windows XP 3.03.11.20041.3.5
Im not 100% sure which driver works properly but you can try to install the Intel driver and after the InProComm.
Good luck
Bye

Similar Messages

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

Automatic update does not work

On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

It will update eventually; there may have been availability problems on the update servers.

HT1338 my software update does not work using OS X 10.6.8: update icon just stays static and times out, although web is online

My software update does not work: the icon jams and then times out, although web is online. How to resolve??

Snow Leopard DVD:
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
When you've installed SL it will be 10.6.3. You need to update that to 10.6.8 with the combo installer from http://support.apple.com/kb/DL1399 - that gives you access to the Mac App store.
Lion is only available by phone also - same number and they'll give you a download code to use in the Mac App Store.
If you're going to Mountain Lion you don't need to install Lion first - you can do it straight from Snow Leopard 10.6.8.
Specifications;
Snow Leopard 10.6.x:
Lion 10.7.x;
Mountain Lion 10.8.x:
As for Lion, but also must be one of these groups;
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
<sorry to repeat, guys, but following links isn't always a given with OPs>

My camera is working but does not work on skype how do I turn the camera on for Skype

My camer is working but does not work on skype how do I turn the camera on.

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

Ms updates does not work after recovery win 7 pro on dv4-2167sb

info on problems with MS updates right after a new install of win 7 pro: does not install updates and will not install SP1 from down load . I used recovery disks I made. The OS [win 7 pro] recovered great but MS updates did not work from the get-go.. {Personal Information Removed} HP NEEDS TO GET ME OS RECOVERY THAT WORKER I HAVE 4 OF THIS DV4-2167SB 'S
Been on the phone with hp [not US] for more than hr. talked to two svr. hungup on 3 times, HP needs some New VP's.

Hi VP_IA_DOT,
I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.
Thanks,
NicNac - HP Support Forums Moderator
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

SQL UPDATE does not work

Hey Guys,
I have an update sql query which does not work with PreparedStatement object. Heres the code snippet:
PreparedStatement pstmt;
int numUpd;
pstmt = con.prepareStatement(
"UPDATE item_articles SET dataFile=? WHERE itemID=?");
con.setAutoCommit(false);
pstmt.setBinaryStream(1,fis,(int)file.length());
pstmt.setInt(2,item.id);
numUpd = pstmt.executeUpdate();
con.commit();
What I am doing here is that setBinaryStream(...) will upload a file into the DB. The query executes, theres no exception thrown, but my table shows empty field for the file. Note, there are no exceptions thrown from this query.
If I do the same thing for an INSERT statement, it works. The file gets into the DB. So , the file is there on disk, and theres no problem with it. Just that it does not work with UPDATE.....any clues ???
thanks
Askar

I think UPDATE commands dont work well with blobs.
I use to select the register with a ResultSet, then get a BLOB Object from the column.
So you can use a OutputStream to Upload your data.

Persian(فارسی)Keyboard on new update does not work (10.3.2)

persian keyboard does not work in 10.3.2 os unfortunately,does not some of the original persian letters like پ چ گ ژ

Thank u very very very very much, i just paused the antivirus and the updated installed the new software 4.3.3 on my iphone 3gs. thank u very much again from my heart. i was trying again and again from 2 days and always i was wasting 421mb of my data.....but at last its done thanks
Priyesh

Smartwatch 2 not working (update does not start, SW is stuck)

Hello. I just bought SW2. I turned on NFC on my phone and placed SW2 on the back of my phone. Phone and SW2 made connection. SmartConnect was installed on my phone BUT then it wants me to install SW2 app (release date 13.12.2013). OK it installs the SW2 app and then progress bar appears on my SW2 and thats it. No progress at all. Phone just saying "downloading updates to SW2" but never starts. I waited two hours but nothing happend.
I try to describe averything I have tried in detail, hoping so that someone can help me.
I tried to use Sony Mobile Update service. I connected SW2 to my PC and Sony Mobile update service said that there is update available. So I do the update, SW2 restarts BUT then all starts over again. SW2 app is still trying to download updates but nothing happens. I tried to uninstall everything and reinstalling SmartConnect and SW2 app but that did not help.
Then I used someone elses phone. I connected SW2 with other phone than mine, pairing worked, SW2 app managed to install the updates (this is where i got stuck with my phone) on SW2 and everything worked. Then I did reset on the SW2 and paired with my phone again. Pairing seems to work. Phone says that SW2 is connected BUT nothing really works. No notifications, facebook app does not show anything. Smart Music Player does not work, Smart Camera does not work. When I click on any app that needs to interact with my phone, a "waiting bar" appears for a few seconds and then nothing, silence. Whe I turn off the bluetooth on my phone, the SW2 app says that SW is disconnected and then I trun on the bluetooth, then it connects again. SW2 and phone seems to be connected but it seems that no information is moving between them. And then there is the battery drain. When SW2 and phone are "connected", the battery on my phone lasts about 3 hours max.
So I tried the Sony Mobile Update service again. Suprisingly. update was available, even tough I did the update befoe AND with my friends phone. So i do the update again and now I am back where I started - my SW2 and phone are "connected" and SW2 app wants to install updates to SW2 but the downloading process does not start and I can not use SW2 without it. So I need my friends phone again just so that I can use SW2 as a regular watch.
My phone:
LG-P940 (Prada 3.0)
Android 4.0.4 ICS
I have heard that people with LG phones are experiencing the same issue...

It seems that we are suffering from the same problem I also have an LG phone aswell.

Mavericks static ip doesn't on wifi does not work

MBA 2011
MAC OS 10.9.4
Wifi does not work with a static IP address.
My wifi access point does not have DHCP enabled, and there is no DHCP server on my network. The internet connection is NOT coming my wifi router.
Every machine on the network has a static ip address and manually configured DNS and GATEWAY to my correct gateway IP. This currently is working on this machine (windows 7), my ipad 2, my xperia phone, my windows xp box, my vista box, and even a virtual pc running windows server which is on my mac.
But the mac won't connect to the internet, or ping anything including the gateway ip address or any other machine on the ip address.
how can i get this mac to have a static ip address without having dhcp

Going to System Preferences -> Network, and selecting Wi-Fi in the left pane.... Questions:
. does the Status in the right pane show connected?
. if so, does the Network Name: reflect the name of the network you assume it should be connected to?
. if so, clicking on the Advanced... button and choosing the TCP/IP tab:
    . is the Configure IPv4 pulldown set to Manuallyh?
    . if so, have you entered in a valid router value (to mirror what you have set on the other working devices), and an IP address which you know is not already in use on the network?
    . if so, when you Ok out of this sheet panel, if you run /Applications/Utilities/Terminal and in that window type "ifconfig" can you find a configured network device with the address information you've entered (likely either en0 or en1)?
If all as anticipated by here:
. what message do you see in the terminal window when you do a ping to the access point's address?
. are you super-sure that address isn't already in use on the network (e.g on a device already on the network successfully and with your MBA's wifi turned off, try pinging the thought-to-be-free address to see if something answers back).

Java 7 U25 work around does not work for windows 8

I'm working on a java application which uses the statistical software R. This line Process p = Runtime.getRuntime().exec(C:\Program Files\R\R-2.15.1 + "/bin/" + "R CMD BATCH " + "./data/rJava.R"); in the application started throwing an error after the java 7 u25 update, but it was fixed by using the work around setting jdk.lang.Process.allowAmbigousCommands to true. This fix however does not work in windows 8, although the command does not error out with "cannot create process = 2" it just executes the line, but does nothing. But if I typed the command (R CMD BATCH " + "./data/rJava.R) directly into the commandline, it works perfectly. I've tried disabling the work around, and actually using suggested solutions in the release notes (see below), all worked in windows 7, but no success with windows 8. Any suggestions would be great
Process p = new ProcessBuilder("c:\\Program File\\foo.exe").start();
Process p = Runtime.getRuntime().exec(new String[] { "c:\\Program File\\foo.exe" });
Process p = Runtime.getRuntime().exec("\"c:\\Program File\\foo.exe\"");

avancentcisco - Win7 works fine with SSL VPN. But since we all were migrating to Win8, this was of no use to us. So we ditched SSL VPN all together.
IPSec VPN with Cisco VPN Client (version 5.0.07) works absolutely fine on Windows 8. Once you get the set up right, everything works fine (we are using full tunnel) including internet access.
If you struggle to get it working then let me know and I can help you out. There's not much info out there on the internet. I had to do it the hard way.

Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.
Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore.
I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.
I really would appreciate help.

I hit this same problem... I spent days trying to figure out what went wrong. MS advise of doing; Windows7 re-installs, BIOS/firmware updates, drivers changed, etc etc etc.
I installed a new(large) SEAGATE Momentus XT hybrid 750GB SATA drive upon newly purchased notebook, but the twist here is between the storage configuration mode in the BIOS, ATA vs. AHCI. See, the DELL BIOS required to configure my laptop storage for AHCI
mode, because I had the 4GB Intel Flash Cache Module (Turbo Memory) installed on the DELL Precision notebook. The Flash Cache is installed internally in the mini-pcie slot, loaded the Intel storage drivers, and when it works, is an outstanding feature which
supports:
Windows ReadyDrive*
Windows ReadyBoost*
Looking at the details of the Intel storage drivers that support the INTEL TURBO MEMORY, they're from 2009. Of course it was recommended by users to install these drivers first before anything else, so it would function best, but this was part of the
cause to all the problems with Windows 7. I've provided links to Intel Flash Cache info for those interested. Unfortunately, loading the HP/Intel Storage drivers fixes the Windows permissions/update problems, but "Breaks" the Intel Turbo Flash Cache
functionality now, even though Microsoft still supports ReadyDrive in Windows 7.
"Intel® Turbo Memory is a primary PC component, along with the CPU, chipset, and system memory. It caches large amounts of frequently used data or user selected applications for faster access by the processor. This decreases the need for hard-disk accesses,
saving both time and power, which equates to increased performance and energy efficiency. That's good news for users who run data-intensive software like media applications. It's also a good match to the substantial system requirements to load and run Windows
Vista*.
Intel Turbo Memory is a single solution that accelerates data transfer both to and from the processor."
Intel discontinued support for the modules or drivers with the marketing move to producing their own SSD storage drives.
WIKI: http://en.wikipedia.org/wiki/Intel_Turbo_Memory
INTEL page: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396715.htm
Intel Drivers/Support Turbo Memory: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396719.htm
For me, I hit all the symptoms everyone else hit and thanks to humphrey for his find. I just wish Microsoft/Intel would get together and fix this Windows 7 issue between SW/HW; Large Drive Sizes, Licensing/Permissions, Flash Memory, ATA vs. ACHI, BIOS, etc.
There's been an incredible amount of loss productivity, resources, and costs incurred on this one ISSUE by everyone involved.
Intel Member login for Mobility Turbo Memory Flash Cache pdf: http://www.intel.com/cd/channel/reseller/asmo-na/eng/products/mobile/mprod/turbo_memory/394947.htm

Itunes update DOES NOT WORK

Apparently I am now one of many I know who are having trouble with this program. Auto Update installed itunes 5 which worked once, now it just bounces off the dock and does nothing, no window, not responding. All the music is still there but the program does not run. I have verified and repaired my permissions, deleted the reciepts, deleted the preferences, deleted the program, reinstalled, restarted pretty much every fix I could find but still nothing. I REALLY NEED THIS PROGRAM TO RUN...I would expect better

have you tried manually installing the new version, 6?

Macromedia Flash MX Professional 2004 Video Update does not work

When I import an MPEG video into Flash MX 2004 Pro, it works
every time except when I try to edit the video and create mulitiple
clips. If I try to create clips, it lets me go through the import
process, right up to when I click Finish. When I click Finish, it
just goes back to the first Import Screen (where it asks whether
you want to import the whole video or edit it first). It does not
import the video at all. This seems like it is an obvious bug. I
have tried installing the Macromedia Flash MX Professional 2004
Video Update and that does not help. I'm on a Windows XP machine
with Flash MX 2004 Pro v. 7.2. Thanks in advance for any help.
Kurt

I'm on a Mac and don't had this problem. But I do watch for
video issues on this site and haven't seen this – I might
have missed a few, but most Flash users are on Windows so I think
it would be common if it were something wrong with Flash in
general.
Then again, what do I know? Because the more I'm thinking
about it the more I think I might have had this problem. But I
really can't remember. And sorry to say the solution was to not use
the import function to edit my videos.
You also might want to just see if it is the format of the
file you are importing. Perhaps a different source will work
better? I'm just grasping at straws here.
If you have many of these to do and a budget I suggest
getting a third party tool like Squeeze. Otherwise if you have some
third party editor you might want to use that.
Good luck!

L10-103 WLAN doesn't work/update does not work!

Similar Messages

Maybe you are looking for