L10: Using single click for extended desktop

Hi
I use a Sattelite L10 for presentations. Is there a way to set up the extended desktop with a single click (one! via .exe, .reg , .. file etc)? (A hot key would be nice too)
The problem is, if I start the computer without the external monitor / projector etc connected it reverts back to single display (normal desktop) and I have to Click right, browse to the correct option etc) I want a single button on my desktop / taskbar. (or hotkey)
Thanks
JP

Thanks for the replies.
But it obnly works until you shut down and restart without the external monitor attatched!
Thene you have to right click, properties, choose extended desktop etc again.

Similar Messages

Using different templates for the desktop and phone versions of the same blog

I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.

There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
Please help!!

I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
Add-PSSnapin "Microsoft.SharePoint.PowerShell"
$sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
$uri = new-object System.Uri("http://url/")
$sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
$sts.Update();
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How used single ssl for tow exchange server without clustering

how used single ssl for tow exchange server without clustering
exchange 2003 std fron-end server
used for add new server for owa failover or standby

Olivia, hopefully by now you have solved your issue but just for the sake of answering that question here so that people having the same issue can later find it I'll go through the motions:
there are a couple of ways you can achieve this.
A. get a certificate for free out there
B. generate your own self signed "fake" certificate.
certutil will certainly let you do this, here's how:
1. First, create a file/directory layout to store your certificates
mkdir -p /path/to/certificates/selfsignedCA2. Initialize a database for the certificate you want to create
certutil -N -d /path/to/certificates/selfsignedCA -P "ca-"3. Create a self-signed CA certificate
certutil -S -x -n "ca-cert" -s "cn=SelfSigned CA Certificate,dc=yourSuffix" -t CTPu -v 120 -d /path/to/certificates/selfsignedCA -P "ca-" -5Note: when prompted, select choice (5) SSL CA and 'y' for critical extensions
4. Export the your newly created self-signed CA certificate in PEM format
certutil -L -d /path/to/certificates/selfsignedCA -P "ca-" -n "ca-cert" -a > /path/to/certificates/selfsignedCA.pemthat should get you going
-=arnaud=-

How to use single eventhandler for all menuitems...

Hi all,
I have a tray with a popup.
Currently I have an eventhandler for every single menuitem.
Is it also possible to provide only a single eventhandler for all of the menuitems and determine the clicked entry with the event??
Tried to use parameter mapping but onAction doesn't provide any parameters... Or am i wrong?!
Additionally, is there a list populated where I can find provided parameters for mapping?!
Thanks in advance for replies.
Bastian
Message was edited by: Bastian Schnorbus

Bastian,
This is possible via parameter mapping.
1. Set same action for every menu item;
2. Add parameter, say "id" of type string to action;
3. In wdDoModifyView write the following:
if (firstTime)
IWDMenuActionItem itm;
itm = (IWDMenuActionItem)view.getElementById("<id-of-menu-item>");
itm.mappingOfOnAction.addParameter( "id", itm.getId() );
/* repeat for all items */
4. In view handler you now can dispatch by "id" parameter received;
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

Get higher resolutions for extended desktop

We have a new iMac. We also have an older Apple Cinema HD display monitor that we're using with the iMac as an extended desktop. On the iMac, we're using 2560 x 1440 resolution; but the highest resolution we can get on the Cinema HD is only 1280 x 800. Does anyone know how we can get higher resolutions on our Cinema HD display monitor?

I've been looking for a way to have the screen resolution change for different Apps too. I can't find anything in Automator, but I hope there is a way.. Like you, I like my editing programs to be higher resolution and my finder, email and the rest to have a lower resolution.

Adapter for extended desktop

Hi there, I am new to this forum, so I hope I am asking this in the right place.
I just bought an Intel iMac and have kept my old 17inch studio display monitor (ADC). I would like to have an extended desktop, but I am confused as to what type of adapter I need to buy for this.
Any help would be appreciated. Thanks.

I'd be tempted to sell the 17" Apple Display on to a PowerMac owner (who no doubt have old graphics cards lying around with ADC connectors on) and use that money towards a new display which can be taken with you to all future Mac purchases.
kind regards
mrtotes

[T60] Use Laptop Screen as Extended Desktop

I have a customer who wants to use her external monitor as the primary, and the laptop screen as the extended desktop. I created a profile in Presentation Director to do this, however every time she reboots she has to go back in an manually apply the scheme. I do have this scheme selected as the default to use when the laptop is docked, that seems to be ignored though.
Any thoughts on how to get the settings to stick through a reboot? Alternately, are there any command line arguments for Presentation Director that I could use to add a command to the startup group and apply the profile that way?
Thanks!

Heya,
There is a program out there you can download that will make this possible. It is called "BBScreenStream", not well known, but I use it myself, and it works great. It allows you to see your Blackberry on your computer screen att different ratio settings, and updates the screen at regular intervals. Requires you to have Blackberry Desktop installed, and JL-Commander.
Try it out. Uses USB only.
Good Luck, and happy holidays.
-Seige

SharePoint JS grid paging, capturing values using single click event

Hi
I need some help with getting the following work using the SharePoint JS grid, the reference articles available are not sufficient to continue work.
1) Setting up Paging
2) Capturing individual field values on single click or any other relevant event.
Sample code or references would be of great help.
References
http://msdn.microsoft.com/en-us/library/office/ee535898(v=office.14).aspx
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010programming.aspx?ID=d6e32632-d0e4-4337-95c3-c2d06fc3ef86
http://answers.flyppdevportal.com/categories/sharepoint2010/sharepoint2010programming.aspx?ID=5c952c6d-b2be-4563-b805-b00e7c8136ff
http://msdn.microsoft.com/en-us/library/ff681039.aspx
http://social.msdn.microsoft.com/Forums/en-US/a439fcc2-42de-45ca-9f74-935498e0d246/js-grid-oncelleditcompleted-event-infinitely-fired?forum=project2010custprog
Thanks,
Sharat
Sharat Menon (Sharepoint Developer)

Hi,
Please try to use PagingFilter class to achieve paging in JS Grid.
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.jsgrid.pagingfilter.aspx
Here is a similar thread for you to take a look at:
https://go4answers.webhost4life.com/Example/sharepoint-jsgrid-2692.aspx
If you want to implement more complex functionalities for a list, I suggest you use SPGridView to achieve it.
Best regards
Dennis Guo
TechNet Community Support

Possible to use powerbook keyboard for my desktop? (temporarily)

So I have a wireless keyboard for my desktop G4.
I need to do some work in single-user mode and I can't do that with the bluetooth keyboard. Is there a way to temporarily make it so I can use the keyboard from my powerbook G4 in its place?
Please let me know!
cheers!
pope

I'm sure it means he owns the Zen Touch.
Phono cables are often not enough for a car stereo as it needs to detect a CD changer, but you can get adapters from a variety of stores that will fool some stereos into thinking there is a changer there. More information and some links here (but try a search in Google as well for your make and/or model of stereo).
Phono cables are also the typical cable uses to connect to a home stereo, but double check your stereo to be sure.Message Edited by SSR on 2-27-2004 02:5 PM

How to use single button for different operations

Hi
I am using one button with image having 4 controls like left right up and down...
How to use the single button for 4 different operations??
Is there any way of defining hotspots on single button to do four different operations...
Please have a look at the attached image, u can understand my problem better...
Please let me know ASAP...
Thanks and Regards
Aruna.S.N.

Here ya go:
http://code.google.com/p/flexlib/wiki/ComponentList
If this post answers your question or helps, please mark it as such.

Capture Single-Click for BDC

Moderator message: Do NOT offer points
Hello Gurus,
I am doing a BDC for transaction CM21. Everything seems to be fine but I ran into a problem. In order to dispatch planned orders, you have to do a single-click on the planned orders and click on the dispatch button.
The big issue i have now is I don't know anyway to capture a single click on BDC.
I know somebody could have ran into this problem before.
Please help.
<<text removed>>
Thanks.
Edited by: Matt on Nov 23, 2008 5:32 PM - read the Rules of Engagement

Don't forget that BDC doesn't work with enjoy transaction (in fact with controls, search OSS there are some notes on this subject) , if BDC_CURSOR to put the cursor on the field is not possible or doesn't work, you may not be able to fulfil your requirement and will have to look for a BAPI to do the job. (Sometimes adding many "Enter" to the BDC enable the transaction to work but not always)
OSS [Note 311440 - Batch input and controls|https://service.sap.com/sap/support/notes/311440]
Regards

Which case in LV Oper. Intf. will do "Run Selected Steps using single pass" for me?

I added a button to simulate "Run Selected Steps", but I really want a button that will "Run Selected Steps Using Single Pass". Which case in the Complex Labview Operator Interface does this for me? What I really want is the report to be generated which happens when I use "Run Selected Steps Using Single Pass" but no report when I select "Run Selected Steps".
Thanks!

I figured out how to make this work. Instead of calling the Sequence File View Manager ConnectCommand method using the Run Selected Steps button and the CommandKind_RunSelectedSteps command kind, you use the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind. The tricky part is that before you can use the ConnectCommand method with the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind, you have to create a set of new commands. Do this by first invoking the Application Manager method NewCommands. This method returns an empty set of commands. You must then add a new command to that set. Do this by invoking the InsertKind method on the empty set of commands using CommandKind_RunEntryPointOnSelectedSteps for cmdKind, Sequence File View Manager for managerControl, -1 for insertBefore, and empty strings for currentMenuName and allMenuNames parameters. Once you have made these calls, then you can call the Sequence File View Manager ConnectCommand method using the CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind.
The previous instructions work just the same for the Loop On Selected Steps button. Just substitute the CommandKind_RunEntryPointOnSelectedSteps and CommandKind_RunSelectedStepsUsingEntryPoints_Set command kind constants with CommandKind_LoopEntryPointOnSelectedSteps and CommandKind_LoopOnSelectedStepsUsingEntryPoints_Set command kinds (and of course use the Loop On Selected Steps button reference instead of the Run on Selected Steps button reference when invoking the ConnectCommand method).
There is one mystery with this solution that I haven't figured out yet, besides the fact that it is so laborious and non-intuitive to me (but at least it works). Nowhere in any of the calls detailed above did I ever see a parameter to specify which execution entry point to use. I am using the default sequential model entry points Test UUTs and Single Pass. Typically you specify which entry point you want to use (such as when invoking the ConnectCommand method) in the form of an index to a set of entry points where the Test UUTs entry point corresponds to a set index of 0 and Single Pass corresponds to a set index of 1. How did the previous calls determine which entry point to use when I didn't specify anywhere which one to use? Do this just work because you can only run or loop on selected steps using no process model or the Single Pass entry point?

NB305-106 - Display driver for extended desktop

I would like to know if there is a display driver or any way possible to have "Extended desktop" with my NB305 rather than cloned dual display?
Thanks in advance.

Hi there,
Yeah thats the first thing I tried. However the extended desktop is not showing as an option, only dual display clone.
The display version was 8-----1972 so updated to the latest driver from Tosh support but still no extended desktop option.
A little frustrating as I have a really old Dell laptop with xp on running two external monitors as extended desktop.

Printing same Smartfom using single click on PRINT for many employee no.

Hi All,
This is my first question that i'm posting in the forum, hope u dont disappont me.
We made a smart form for HR-pay slip. It is working fine for one employee, but when a range of employees are selected it asks a print preview screen each time for every single employee. We managed to get rid of the pop up print preview screen but still on clicking PRINT, it prints first emp. smart form, then back (F3), and again print for second emp. HR people need to run this for hundreds of employee and cannot click print for each one of them.
So, all I wanted was that somehow on clicking PRINT the very first time it shall print for all the range of employees given.
Step.1.Get pernr.
Call SSFfunction module name for smartform ZHR_PAYSLIP
go back to (Step.1) picking the next pernr given while execution

Hi Vivek,
Thanks for your response, now i feel a member of the forum.
I am just a beginner in Smartforms.
Ur reply made me realise that i had not used SSF Open N SSF Close FM.
the fraction of the code is:
========================================
GET pernr.
CALL FUNCTION 'HR_READ_INFOTYPE'.
PERFORM process_pernr                                     "VKIK032705
    USING pernr-pernr pn-paper pn-permo payty payid bondt mc_incl
      pnpabkrs[] subrc.
IF exp_frm EQ false.
     CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
         EXPORTING
           formname             = 'ZHR_PAYSLIP'IMPORTING
          fm_name                  = formname
     control-no_dialog = 'X'.
     control-PREVIEW = 'X'.
         output_options-tdnoprint = 'X'.
         output_options-tdnoprev = 'X'.
         output_options-tdimmed = 'X'.
         output_options-tdiexit = 'X'.
     CALL FUNCTION formname
         EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         = control
   NO_DIALOG                 =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
        OUTPUT_OPTIONS             = output_options
'output_options added by himanshu 6.12.2006
        USER_SETTINGS              = ' '
           v_amount                   = v_amount
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
ENDIF.
===========================================
so u see as i have embedded the Call SSF FM stmnt. it executes the smartform for one pernr (personnel no.) and when it fetches the next pernr in the stmnt. GET PERNR, it executes the smartform again.
Is there a way when the smartform can call itself so that the output is successive and i dont have to press back button each time to see the payslip of the next personnel no.
Also plz advise where shall I use the SSF_Open and SSF_Close FMs.

L10: Using single click for extended desktop

Similar Messages

Maybe you are looking for