L2 netflow in 6500 IOS version 15S
We configured netflow at a 6509E with version 12.2.
mls aging long 120
mls aging normal 60
mls netflow interface
mls flow ip interface-full
mls nde sender version 5
ip flow-export source vlan1
ip flow ingress layer2-switched vlan xxx-yyy
ip flow-export destination 10.1.1.1 20
and we added some "ip flow ingress" at selected interfaces.
interface Vlanxx1
ip flow ingress
it works as expected
Now we need to configure it at 6509E with version 15
It is ok to configure the interfaces with flow monitor and exporter, but I didn´t find the layer2 netflow command.
I used http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/fnetflow/configuration/15-sy/fnf-15-sy-book.pdf to configure the netflow monitoring.
Does anyone know about l2 netflow at IOS version 15?
Thanks.
Igor Max
Looks to me like a timer problem - maybe a ARP timer on the clients? Check the ARP tables of your clients during your tests.
HTH
Similar Messages
-
Compatible 6500 IOS version to support IDSM-2 Inline mode
The 6500 model WS-SUP720-3BXL with IOS version 12.2(18)SXD4,
and IDS card WS-SVC-IDSM-2 with sw 5.0(2)is compatible to run on inline mode.
Regards,
VirajGood day,
Hi, You need minimum sup-bootdisk:s3223-advipservicesk9_wan-mz.122-18.SXF7.bin IOS to enable INLINE mode on 6500 series.
as per my knowledge,
the latest IOS is
sup-bootdisk:s3223-adventerprisek9_wan-mz.122-18.SXF13.bin.
for IDSM-2, if u upgrade to Engine 2 IOS, U can get update with E2 signatures and also U can manage from New Management Console like Cisco IPS manager Express 6.1.
I hope this will satisfy. -
IDSM2 on 6500-IOS inline mode support?
Hi,
I have an IDSM-2 running IPS5.1(1d) software (recently upgraded from 4.x) that is sitting on a 6500 IOS.
The IPS device manager shows gi0/7 and gi0/8 as both in Promiscuous mode. There is no option to change the mode to inline and pair them.
Is it so that IDSM-2 currently supports only Promiscuous mode?
If so, then this module is still acting as an IDS despite running IPS5.1. Isn't it? What is the advantage that I get after upgrading it from 4.x to 5.1?
-- VasanthThere are 2 pieces to the puzzle.
There is the IDSM-2 version and what it supports, but also the Cat 6K Native IOS version and what it supports.
IDSM-2 v5.1(1d) supports
a) Promiscuous mode,
b) InLine Interface Pair mode (2 interfaces are paired for inline monitoring), and also
c) InLine Vlan Pair mode (2 vlans on a single interface are paired for inline monitoring, you will also see it called inline-on-a-stick)
But for these features to be used, the switch code must also support configuring the switch side of the IDSM-2 for each of these 3 features.
Native IOS Versions prior to 12.2(18)SXE will support only Promiscuous mode on the IDSM-2.
12.2(18)SXE and later versions will support InLine Interface Pair mode on the IDSM-2.
No Native IOS versions currently support InLine Vlan Pair mode on the IDSM-2 (a new Native IOS versions with this support is currently in development).
So to get Inline (IPS) functionality you need to be running a Native IOS version 12.2(18)SXE or later, and on the IDSM-2 run IPS versions 5.1 (or even the older 5.0).
(NOTE: Cat OS 8.5(1) does support all 3 modes of the IDSM-2. So if you are using Cat OS instead of Native IOS, then run version 8.5(1) to have access to all of the features of IPS 5.1(1) on the IDSM-2)
If you are running a Native IOS version prior to 12.2(18)SXE then the IDSM-2 can only be operated in Promiscuous mode even if 5.1(1) is loaded on the IDSM-2.
However, even in promiscuous mode the IPS 5.1(1) software does have a few advantages.
There are several engines, and engine parameters that are only supported in the 5.1 version and not the 4.0 version. So there are several signatures that are either a) not even created for 4.x sensors, or b) the 4.x signature is not as precise as the 5.x signature in the new engines.
(These new engines have proved invaluable in writing signatures to detect some of the new attacks that have come out over the past year.)
There are of course other advantages as well:
For example:
1) Risk Rating to better aid in prioritization of alerts.
2) More flexible fitlering mechanism for alerts that allows for fitlering individual actions
The 2 features above are just 2 of the new features that have been added in 5.0 and 5.1 that apply to both promiscuous and inline modes. -
6500 IOS HSRP Gateway not responding to ARP requests
WS-C6509, running Native IOS version 12.2(33)SXH4. Pair of 6500 configured with HSRP serving as Gateway to down stream clients
Ping requests from clients not having a Default Gateway (AIX Server Team recommendation) failing.
Packet capture show ARP requests being received by Gateway 6500, but Gateway will not respond for up to 30 seconds at which point ping requests will start working. But after a period of inactivity, the cycle starts over again - 30 second delay before traffic starts flowing.
Having a Default Gateway is a separate discussion. I'm just interested in being able to provide technical reason why this is occuring.
Anyone experience this?
Any suggestions for addtional troubleshooting measures?
Thanks in advance.Looks to me like a timer problem - maybe a ARP timer on the clients? Check the ARP tables of your clients during your tests.
HTH -
I have synced my ipad with my computer then downloaded latest ios version. How do I resync my data back to my ipad?
You Restore from iTune Backup.The syncing is towards the end of the Restore.
1. Settings>General>Reset>Erase all content and settings
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Select Network and input Password>Join
9. Enable Location Service>Next
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Select Restore from iTune Backup
12. You will see picture of USB cable pointing towards iPad
13. Connect iPad to iTune (make sure iTune is on standby)
14. Tap Continue (computer)
15. Restore iPad from Backup (computer)
16. See progress bar with estimated time (computer)
17. See Restore in Progress on iPad
18. See Apple logo
19. See Apple and Progress Bar
20. Slide to Unlock
21. Copying Apps back to iPad (computer)
22. You'll see Loading/Installing/Waiting below the Apps (iPad)
23. Sync Music/Podcast/Movies to iPad (computer)
24. Sync completed (computer) -
I have an iphone 5. I have no idea of the ios version in it. Recently i broke my iphone screen and its showing up nothing. it was never synced to itunes or to any pc. When i tried to connect iphone to itunes in my pc it was asking for passcode which i had forgotten ages ago. Suggest me the possible ways to recover my iphone.
Since the screen doesn't work, it will be challenging to get it working, even thru iTunes. You will need to ask yourself if you want to invest more money in it or get a new one, especially since the contents will be lost since you don't know the passcode. Apple will gladly replace the screen for a cost that represents a significant portion of the price of a new. Once the screen is done, you may or may not be eligible for the free iPhone 5 Battery Replacement Program.
Or, if you decide to salvage it and are strong of heart and firm of hand, you can replace the screen yourself for less. See here and note they carry kits with all needed tools and parts. -
How come I can't update my iPad 1 to the new iOS 6 it says my iOS version 5.1.1 is the latest version?
The iPad 1, coming up on three years since it was introduced, has been given two major and a number of minor upgrades to iOS, more than many tablet manufactures provide. The iPad 1's hardware just can't effectively support many of the features in iOS 6. So I don't think that it's particularly unfair for Apple to no longer provide updates. And yes, I do own and manage a number of iPad 1s.
Regards. -
I have an iPad 1 that is currently showing software updated at version 5.1.1. Is it possible to update to iOS version 7 on this device? My goal is to get Garage Band on this device and the app store is telling me I need iOS version 7.
Hi,
If you really need to upgrade you can save a bit of money and get an older version than the ipad Air.
First, you can sell your ipad 1 to places like gazelle.com, cashforyourmac.com, sellyour mac.com, or many others out there. The sites I listed give you cash. At this point gazelle.com is giving $70.00 for any ipad 1 in 'good' condition. And cashforyourmac will give you $25.00 over what gazelle.com or sellyourmac.com offers you. Shipping is free.
Then, with that money, go the the Apple online certified refurbished store. As an example, a new 64gb Air costs $699.00. A refurbed 4th gen 64gb costs $529.00 and a 3rd gen 64gb costs $499.00. Personally, I'd skip the 3rd gen. So if you buy a 4th gen 64gb at $529.00 minus what you can get from a sale to above, you can get an ipad 4 64gb for just over $430.00, a savings of savings of about $270.00. (A new 32gb Air is $599.00, a 4th gen 32gb is $449.00, and a 3rd gen 32gb is not on the site right now.) Google it and check if you can get better offers anywhere else. But getting one from the Apple refurb store gives you an essentially new ipad and using the above sites, you're not locked in with a particular site which will give you a gift card and restrict you to their store/site.
Each Apple refurbished ipad (any version) comes with a new front and back cover, a brand new battery, same return policy, and a full one year warranty with 90 days of phone support. Each comes in a white box like a new ipad with the wall charger and usb cable. The only difference is that it says in small print on the bottom of the box that it is Apple certified refurbished. Also, if you buy refurbs, be sure to check the store many times a day. They can come and go quickly, so when you see what you want, buy it right away. Shipping is free and pretty fast. (We bought two a year and a half ago and they have been great!)
Hope this helps. -
How can I do a backup now if I can't even access this new device to update its iOS version? And if I just select the option of configuring it as a new Ipod so I can update it, will it still be possible for me to download the previous device's backup on it later? I'd hate to lose everything.
That error message means that your new iPod is not fully updated. Update the new iPod and then restore from the backup of your old iPod.
-
When i tried updating my iphone 4 to the latest IOS version 7.1.1 it was updating until the end of the update where it had an icon which said connect to itunes. When i try connecting to itunes on my laptop it still doesnt program, by the way my itunes has the latest updae. Why is this? How can i fix it?
Hey there Raymondd2014,
It sounds like you had been updating the phone and now it is in recovery mode. Take a look at this info first:
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
If you are unable to get out of Recovery Mode, use the following article to restore your device with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If you don't see your device in iTunes follow these steps for Windows.
Thank you for using Apple Support Communities.
Take care,
Sterling -
I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??
When i try to restore my Back up using Itunes this is the message i get - "Unable to restore backup as the software is old - Please setup as a new device and then try to restore your backup" - Please advise. If i do so are there any chances of loosing my data. At this point in time i would be happy if i could just retreive my contacts list. Any suggestions would be greatly appreciated.Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
-
Ipod touch 2nd gen and have ios 4.2.1. apps that will not download, higher ios version needed
I have an ipod touch 2nd gen and have ios 4.2.1. I recently tried to download some apps and received a message that said I need a higher ios version (like 4.3 or higher). I know there used to be apps that worked before but I deleted them. When I tried to re-download them again they say they won't work. Options?
Thanks
WestyImport the older versions to the iTunes library from your computer or a backup of it, or buy a newer device, or give up.
(72621) -
I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?
You would only be able to restore to a backup to iCloud or iTunes:
Restore from Backup
Cheers,
GB -
My iPhone 5 is not allowing updating to the newest iOS version 6.1.3.
My iPhone 5 is not allowing updating to the newest iOS version 6.1.3. I missed doing the 6.1.2 update before 6.1.3 was available. It wants to install the 6.1.2 update, but, once I agree to the terms it tells me I can't because I am not connected to the Internet. It is connected to the net, as proved by surfing and iTunes, both by LTE and wireless. I have tried both a full shutdown as well as the most of the easy tricks to, like with apps updates, to get it to refresh. Has anyone had this issue since the 6.1.3 release, and is there an easy way to resolve the conflict.
The next iOS update won't change this.
Are you able to transfer anything else from your iTunes library and computer via the iTunes sync process such as a movie, TV show, podcast, audio or print book, apps, and photos from your computer?
What is selected under the Music tab for your iPhone sync preferences with iTunes. -
I have a Macbook Air running OS-X Yosemite and an iPhone 5s running IOS version 8.1. Every time I try to connect the devices via bluetooth is won't connect saying my Macbook Air isn't supported when in actuality it is. Anyone know how to fix this issue? I have restarted both my Mac/Iphone and have turned bluetooth on/off and nothing seems to help. Bluetooth pairing didn't work before I updated to IOS 8.1 so I doubt that is the issue here.
Pairing an iPhone to a computer (Mac or Windows) is only supported for personal hotspot (sharing the iPhone's cellular internet connection) and then only if your cellular plan supports it. More information: Bluetooth: Why can't I pair my iPhone or iPad with my computer?
Maybe you are looking for
-
Importing family MobileMe calendars and accounts into iCloud and living to tell the tale...
I have been staring at this for a long time and I hope this doesn't turn out to be as much of a brain twister as the early builds of MobileMe did. However, since I guess there must be plenty of us in the same boat, I figure this might be a good place
-
Adobe Muse CC will not install, Get Error "Exit Code: 7"
Need a fix to above problem fast. Workiing on a website for work. Using Windows 8 and uninstalled previous version. Thanks much!
-
Ivory plugin missing in AU Manager in Logic X 10.0.2
I don't see Ivory in Logic X Works fione in Logic 9.1.8 Any thoughts? Thanks! TD
-
ICP Plug Accts Do not tie to ICP Report
When we run the ICP Plug report, it should tie to the grid that built to show ICP Plug Balances. The report worked up until some minor MetaData changs were made 2 weeks ago. Here are the changes : Account Type G/L From
-
What is the best way to upgrade to a new kernel?
I would like to upgrade to the new kernel: kernel26-2.6.23.14-1 from the one from core (on the CD). What is the best way to do this? Also, is there a way to find out what is new / has changed in the new kernel? Thanks for any insights.