L220x and i1display2 calibration issue

I am attempting to calibrate my monitor with an i1 display2 with latest software from X-rite and having issues with RGB Controls (possibly other things not sure)
Basically regardless of whether i use presets or custom I am unable to move the RGB bars when adjusting the Gamma. the bars basically alertnate right/left/right and are at the max on that side. Regardless of how i manually adjust colors thru the osd the bars will not move and center.
In the my Green Gamma is way off. Wondering if I am doing something wrong. Could someone who has this device post hwo they did it.
Thanks in advance for your help
Kevin

eric,
I noticed the same thing. using Native White Point the Gamma behaves correctly. I then saw a not at X-Rite's site that said to change to Laptop mode. I tried that also and yeilded better results.
What is perplexing is why it is happening. Something like that bugs the heck out of me, hehe. Going to fiddle with it some more and see what I come up with. I am also considering using an open source calibration software (some french made thing can't remember name right now) and see what happens.
Then lastly thinking of hooking the monitor back up to my laptop since that is a ATI vid card versus the Nvidia I am hooked to now.
Wonder if that has any impact. Oh eric, question for ya did you have an issue when adjusting the RGB Control settings in the iMatch software not adjust towards the center (green area). the markers are basically at the far edges and no matter how I adjust those settings they basically don't move.
Message Edited by sonicdivx on 09-23-2008 05:39 AM

Similar Messages

Display Calibration Issues

hi,
just upgraded to 10.6.8 and lots of issues.
the biggest is that my 30" cinema display now looks 15-20% lighter.
the screen image (especially in abobe indesign) doesn't look like it did in 10.5.8
and looks lighter than my normal print output.
I've played around with display calibration, but my new settings are really different
from my original settings. and of course, now all my indesign files are out-of-sync
with the abobe color settings and need to be updated, each and every one.
I also read that the new 'target gamma' is now 2.2 for 10.6.8 (as a default), but
when calibrating in SL, isn't not default and you need to know to manually change that.
has anyone else experienced these kind of SL display problems?
if so, how did you correct them?
in the back of my mind I'm thinking it's something with the video card, but
I'll try anything short of messing with that.
bottom line: all was well in 10.5.8.
now with 10.6.8, I've got issues that need to be fixed asap.
jim

my suspicion is snow leopard.
Nope, color works just fine. Something has changed in your setup. If you're using the exact same monitor and printer profiles you had under 10.5.8, color should come out the same under Snow Leopard.
While the default for Snow Leopard is now a 2.2 gamma, it doesn't mean you can't change it. It only means the long supplied Apple profiles are now built with a 2.2 gamma instead of 1.8. You can still build your monitor profiles to any white point and gamma you want.
Color matching is actually much simpler than it sounds. Though I should say the concept is simple. ColorSync is what controls color between devices. If you're trying to match your print to the monitor, ColorSync reads the monitor profile's color space. It does the best it can to make it fit and translate to the printer profile's color space.
That's the simple explanation. But in order for that to work, you need accurate profiles. You'll go through an awful lot of paper and ink trying one unrelated profile after another, and still get nowhere. By "unrelated", I mean using a profile that has nothing to do with the device. Such as choosing "Adobe RGB" as your monitor profile. That profile means nothing in relation to your monitor. It does not describe the white point, gamma or brightness you monitor is necessarily set to, nor the gamut or range of color it can actually display. Same goes for the rest of any profile the system allows you to choose as your monitor profile. They are all generic profiles that in no way describe the device you are looking at. I go into a lot more detail on monitors here.
So when you do use one of those generic monitor profiles, ColorSync can only assume, yes, this must be exactly how the monitor looks that you're viewing. Which of course it doesn't. So naturally, printed color is rarely even close.
The least expensive color management tool you can buy, and at the same time drastically improves your ability to match output to your screen is something like this. Of the two models, definitely get the i1Display Pro. Much faster, accurate unit. Also much better software with more control. Don't bother looking at older colorimeters such the i1Display2, Spyder, or any other previous models. They can't handle the output of today's wide gamut LCD or LED monitors. Gray rarely comes out gray. Usually very greenish or pink. These new models have bee completely redesigned to handle today's monitors. They also handle older monitors just fine.

Pavilion Dv7 4165dx Hard drive failure and performance issues?

I have a pavilion dv7 4165dx notebook that was working great until a couple of months when the performance of my machine started to decrease rapidly. I have performance issues with the machine because it takes 1 to 2 minutes to get from the welcome screen to the actual desktop and another 3 to 4 minutes for it to be ready to use. I already upgrade the memory from 4gb to 8gb but instead of going faster it goes slower and i also did a clean install of windows but it didn't help. Before i have problems it took maybe 30 to 50 seconds to go from the welcome screen to the actual desktop and 1 minute and 30 seconds to be ready to use and by the way i use soluto to tell me when the machine is ready for use.Then last week i notice that the headphone jack wasn't working properly so i contact hp and they told me to send them the laptop so i did, they replace the motherboard and they send it back to me and i just got it today it got a little better but it still lags on the welcome screen and to open programs. I check the memory using memtest 86 and the memory it's fine, but i check the hard drive with HDD Regenerator 2011 and it show i have one delayed sector. Then i check on hd tune pro and it show me some WARNING on section Calibration retry count( as you can see on the picture below) so my question is should i be worry and send it back to hp or what can i do to fix the problem i am having with this notebook?

I have the same laptop and have had issues with it since the day i brought it home. I have had it for a year now and am now replacing the hard drive for the 3rd time. My guess would be its your hard drive because most of the issues you seem to be having ar the same ones ive been dealing with for a while. I can say I'm very mad about the quality of this laptop and am in the process of battling with HP over this issue. If you have a chance go online and look at all the hard drive issues that this laptop has had and even look at the HP forums for this issue it will irritate you and make you wonder why this hasn't been fixed yet!

10.5.3: Clamshell mode and 1080p display issues fixed?

Has the clamshell mode issue and 1080p display issue been fixed in 10.5.3? Are you able to shut your laptop and use 1080p on an external monitor without the **** thing freaking out?

Me and hundreds like had the issue when we upgraded to 10.5.2. It is a known but bug that when you start up the system an external display wouldn't be recognized in calibrated profiles (only at 1440x900). A work around was to start up then close the door immediately or boot up without external display connected and connect when completed booted.
I was told by support in Jan that there would be a fix in the next release (10.5.3 I presumed), but after installing it I have the same problem and the release notes don't mention it as repaired.

O.T. iMac and Epson Printer Issues

I have just set up my new 20" iMac running OS 10.5.6 and have been testing my various peripherals.
Printing old saved PSE3.0 images on my Epson 1290 (1280) they are coming out noticeably darker than when printed under OS 10.3.9. I deliberately did nothing with the saved files in PSE,just clicked print to avoid introducing any screen calibration issues,and the correct .icc profile had been added to Library/Color Sync/ Profiles for the paper I was using (and have always used).
Is this a known problem with an iMac running Leopard ?

Perhaps I should have done this before starting my thread,but who wants to reinvent the wheel !
Having spent many hours this morning,and even more sheets of paper to resolve this problem,I have come to the following conclusions on printing an image from PSE3 in Leopard :
USING THE EPSON PRINTER DRIVER -
Leave the printer manage colour - color controls - photo realistic - gamma 1.8
USING GUTENPRINT DRIVER (http://gimp-print.sourceforge.net/MacOSX.php)
Make no changes to Color Sync use Automatic
Do not change the .icc profile (although I did leave it set in PSE3).
Adjust print quality to max possible.
Both these options give acceptable prints, Epson perhaps a shade darker.
I preferred the colour representation in Gutenprint,but that is obviously a personal thing. Whether they'd satisfy someone making a living from photography is another matter.
In the future I will probably tweak the lightness in PSE to compensate for the slight darkening in the print process,but probably leave the colours alone.
Two other points -
The Gutenprint driver seems to print more quickly.
Adobe and Apple don't seem to care.

Help me solve color and dark print issue with a new monitor recommendation!

I know, I hate "surveys" too. I'm thinking of attacking my color and dark printing issues w\LR and CS4, by investing in a new monitor. I currently have an 20' early edition Apple Cinema Display. The monitor is the last hardware (software) item in my current upgrade cycle. From those folks who are NOT having color or print problems, what displays are you using (or would recommend)? Ah, and price is an issue. Apologies in advance to those who think this is not appropriate use of the Forum.

Monitor calibration is the first port of call. Sometimes changing one item in a system is enough to show up a colour management issue. You suggest that the monitor is the last item in your upgrade cycle, what all have you changed? Computer, printer? There may also be a setting you have failed to set when you installed the new software, eg. have you remembered to set relative colorimetric with the black point compensation box ticked, disable colour management in your printer driver and put an appropriate colour profile for your monitor onto the new computer? You also need the correct profile for your printer/paper combination set up in Photoshop.
If you haven't calibrated your monitor, that on its own will give you poor prints, but all the other bits are needed also.
Jo

HP TX2000 Pen Calibration Issue(s)

I have an HP tx2000. I reinstalled windows and then I went to calibrate the pen digitizer thing (for portrait) and in the middle of calibration a window poped up. I couldn't close the window with the pen because it wasn't calibrated properly. So, I rotated the screen to the regular landscape view and closed the window. Well, no matter what I tried, I couldn't get back to the calibration. So, I shutdown the computer and tried to calibrate it again, but it wouldn't let me. Does anyone have any suggestions to fix this calibration issue? Thank you very much for your help.

There are more than 1000 entries in google under "hp pavilion tablet driver"each asking for the driver.
More than 300 visitor read your post.
No one answered at all.
Do you think is your fault, or maybe HP and Wacom are too busy to deal with this issue.
Until this issue stays under, lets say, 500 readings, you'll get no answer.
Maybe you thougth they will hurry up for you, and your error buying this equipment for your specific need, and the possibility of sell it out!
It's a shame but, in this business, products go to the market before they get success on real quality tests. We, final customers, are their quality control. And these products are OK unless anyone can speak loud enough to reveal any inconvenience.
Don't wait for any answer until another user, with enough time and knowledge to get it running, falls in the same problem.
Anyway, good luck!!
God, give me patience. But give it to me NOW!!!

Gmail/Exchange email and calendar syncing issues

I have wiped my email accounts several times and entered in my data in the various ways as shown through the forums but my email accounts do no sync properly whether it is manual or active synced.
I read my emails in my gmail and my Microsoft exchange account and will delete or file them away but then when I check my accounts on my desktop, they are not synced as I've done so on my phone. I've also noticed that my calendars are not synced correctly either.
Could someone help me understand why and how these issues can be fixed? I'm in meetings for most of the day so I rely on my phone to keep me mobile. Was this a bad purchase?!?!

Hi JadeyMU,
How do you have your Microsoft Exchange account configured on your BlackBerry Z10? Are you using ActiveSync, BlackBerry Enterprise Server (BES), IMAP or POP?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

My experience with Apple TV and HDMI/HDCP issues

I am convinced that it is the software update to 4.2.2 from 4.2.1 that is causing this issue. All forms of applications only worked once for me and then it reverted back to HDCP issues. I read several postings everywhere including plenty at Apple's forum and AVS where people were very frustrated with this HDCP issues. Anyways, here is what I did before taking it back to Apple store....I bought AUVIO high speed cables from Radio Shack which is rated very high and tried that and I still got HDCP issues when using NetFlix or AirPlay from iPad. Youtube from Apple TV always worked well without HDCP complaints.
I packed everything back and took it to Apple Store (you can return without re-stocking fee up to 14 days from the day of purchase). After 14 days, you cannot even return it and you can ONLY fix it. I waited for a Technician. They heard my complaints but didn't refute any of it (possibly because they have had numerous complaints on this product). It took 5 minutes inside for them to test and see similar issues with the box that I had. So, they have swapped it for a new box. Before I left the store, I checked the settings including software version and Audio/Video settings in the Apple TV that is connected at the store. I found three main differences none of which the Apple customer service staff agreed could be the reason for my problems (surprise!!)
1. The software update from the shelf and the one they were using was NOT updated to 4.2.2 (it was still running 4.2.1)
2. Because of the software update, the Audio/Video setting for HDMI had the options to toggle between Auto, RGBy, RGBhi & RGBlo bandwidth. I believe this was in place to make the HDMI interface output as component with higher or lower bandwidth but the newer update will ONLY give you the Auto option (!!!)
3. They had this directly Ethernet wired and not through Wireless network and were recieving the all the full bar strength signals. On the box that I returned, eventhough I have 18 Mbps speed at the house (any given time of the day), the Network speed test was taking a long time. Moreover, after the Apple TV network test, it doesn't spit out the outcome of the tests (a BIG bummer and useless for testing).
Anyways, I took the new box and hooked it up directly to my SONY BRAVIA XBR3 TV to one of the HDMI ports, disabled the feature to send or recieve data to Apple directly and did NOT update the software. It worked fine and have tested all of the options. From what I have read so far (I have only spent 30 hours of my weekend on this when Apple product hookups are supposed to take 5 minutes ONLY), there is NO guarantee that it will work continuously as people have had things work on them for 6 months and then suddenly have the HDCP issues.
Will wait to see....if it continues to work....

I figured it out. Had to go to general settings on the main screen and restart. Synch of audio is much better.

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

Interesting and an imporatant issue at sales order schedule line.

hi all,
interesting and an imporatant issue at sales order schedule line.
i created a sales order with 10 qty.and the system proposed a two schedule lines.
let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
schedule line date                      Material availabilyt date   delivery date
27.10.2008 with zero quantity.
28.10.2008 with 5 qty.                28.10.2008                     29.10.2008
02.10.2008 with 5 qty.                02.10.2008                     03.10.2008
now the delivery and pgi already for the schedule line 28.10.2008.
then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
now i can able to view only two schedule lines only.
schedule line date                      Material availabilyt date   delivery date
28.10.2008 with 5 qty.                01.11.2008                     29.10.2008
02.10.2008 with 5 qty.                01.11.2008                     02.11.2008
now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
Regards,
sheshukumar

can any one repsond for this.....

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Report Builder - Last page issue and Report Footer issue

I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
Issue 1 - I have a field that I would like to print on the last page of my report. How can I determine the last page? I initially tried using a calculated field set to the 'highest' calc.Page_Number. Then I could compare the current page to the last page in the 'Print When' property. But calc.Page_Number can not be used in a definition of a calculated field.
Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer. The report includes this page in the total number of pages. For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2. Then the only data on Page 2 is the Report Footer. No page header or page footer prints.
Any assistance on these issues would be most appreciated. To date, using the Report Builder has not been easy.

To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
Try some experiments with different setting of the following properties/issues:
- in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
- try to remove unused empty space between detail rows.
- try to resize and reposition all detail fields so that they snap to the grid.
Best regards

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.

Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

L220x and i1display2 calibration issue

Similar Messages

Maybe you are looking for