L305-s5933 dvd drive wont open

hi.
Well I've been experiencing problems with the dvd drive in my laptop last week, I dont know when this problem started because I don't use the dvd drive very often but the problem is that the dvd drive won't open after the computer has been on for one hour or more, when the computer has only a few minutes turned on, I can open the drive and read any dvd/cd I want, but after one hour the freaking drive just stop responding to the eject button. Trying to eject using Windows software won't work either. The only way to make the drive work again is to turn off the laptop and turn it on again.
a few weeks ago I made a clean install of windows 7, so I'm guessing I forgot to install a driver or something?
just to sumarize my situation:
-Dvd drive won't open after the computer has been on for a while. (Doesn't repond to  eject button or windows eject command)
-I have to turn off the computer and turn it on again to make the dvd drive work again
-I'm not sure if this problem started after i installed windows 7.
Any help?
Solved!
Go to Solution.

Just for the record.
The problem I was having with the DVD drive was caused because I didn't install an AHCI/PCIIDE patch that's is included in the drivers and applications recovery DVD. After installing this patch (is actually a registry patch) the DVD is working just fine, doesn't matter how long I use the laptop.
Even tough windows 7 supports natively AHCI mode for SATA devices,  DVD-rw drives in some (not all) Toshiba laptops have problems in the long run if you don't apply the registry patch.
I hope my experience helps others experiencing this problem.
bye.

Similar Messages

  • My cd/dvd drive wont work what do i do ?

    i own a hp pavilion dm4 -3055dx. my cd/dvd drive wont work, what do i ? besides itunes freezes media player freezes. nero wont respond. how do resolve these ?

    Hello teperepc,
    Take a look at this page for trouleshooting your cd/dvd drive not working.   About those other programs - do they freeze every time you use them?  Do any other programs freeze, or just the audio/video stuff?
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Help canceled itune backup disc drive wont open??

    Why wont my disc drive open to remove disc?
    I canceled the stupid itunes offer to back up my music and because said it'd take hours (Im an idiot I guess I didnt know it would take that long).
    Now my disc drive wont open I tried ejecting it by my comp and clicking eject disc or open on disc drive didnt work.
    Tried task mangager end, didnt do it.
    Whats the deal? I will never try to back up itunes again, I mean they save my data I buy anyway.
    Help!?
    Thanks in advance.

    Thank you ! It worked I was headed there but wasnt sure if that was the right action or not.
    I was affraid it would just pick up where it left off.
    UGH. That was my first experience with that in several years of pc use LOL.
    If my disc drive works I guess it didnt hurt it? It was running kinda hard after but seems okay.

  • Optical drive wont open from keyboard

    my drive wont open anymore from the keyboard comand. it recognizes a cd though. any know how to fix.

    Does the issue persist even when you do a Safe Mode boot…
    http://docs.info.apple.com/article.html?artnum=107393
    … ?

  • CD/DVD drive door opens when eMac wakes from sleep

    I have two identical eMacs running OS 10.4.9 but for some reason one of them has a problem where the CD/DVD drive door opens by itself when I wake it up. Has anyone experienced this problem?
    Thanks!
    Brent

    The same thing happens to my eMac - and it has not been serviced at all. I have been watching your post for a reply. Can anyone provide a bit of help as to why the eMac CD door pops open upon waking from sleep?
    Grateful for your help,
    Irene
    eMac, iBook   Mac OS X (10.4.7)  

  • My dvd drive wont read (or even accept the existense of cds) much less burn them. HEEELLLLPPP

    my dvd drive wont do alot of the things it is supposed to like burn cds, or even recognize them, also when I went to my profiler it says the drive doesnt exist. as far as I know the model is an  MATSHITA DVD R UJ 875. my computer will still read dvds, but if there is a cd inserted, then it makes some aggrivating noises and then spits it out, I know little to nothing about SERIOUS computer work, like firmware patches, or bridges or whatever the terms are. When I try to burn anything, it cycles almost burns, but then, like clockwork. the error messafe pops up that  there is an un expected error. I am at my witts end here is there any thing I can do to fix this problem, without spending money I really dont have right now? (I am going to school and it starts this thursdaty) or should I just get my SKS out and fix the problem with a Full metal jacket?  someone help. if need be my email is [email protected] Please help me if you can.
    Thanks all

    Try resetting PRAM…
    http://docs.info.apple.com/article.html?artnum=2238
    At times it helps with optical drive issues.

  • MacBook Pro 17"... JUST REPAIRED VIA APPLE STORE ...CD/DVD Drive wont mount disks

    Macbook Pro (17") wouldn't boot to desktop/homescreen, so I went to Apple. 
    They sent me to Micro Center for data recovery.  Success. 
    After that, back to Apple then they sent me to Best Buy for new Hard Drive.  Success. 
    Back to Apple.  Everything working ok except that my Adobe Creative Suite programs no longer work. 
    So I try to reinstall via data CD, as I did when I originally installed the programs, but now my CD/DVD drive wont mount ANY disks!
    It accepts them, makes some odd noises, then spits back out.  Please help! 

    I'm confused, why did Apple 'send' you to 2 non Apple places for repairs? Did you buy the product from Best Buy? It doesn't seem like Apple made any repairs, so you'll have to get either Micro Center or Best Buy to repair the issue for you.
    How long ago were these repairs?

  • Optical Drive Wont Open

    Hi all,
    I have a Mac Pro which has just had Leopard installed. My problem is that the optical drive wont open up normally anymore. Pressing the eject button only shows the eject symbol on the screen however does nothing to the drive itself.
    The only way I have managed to open the drive is by going to iTunes and selecting the eject option in the control menu. Also by pressing the button at the front of the drive works too.
    I had this issue when I had Tiger installed so when I upgraded to Leopard I was hoping the issue would of resolved it self. Which it didn't.
    Is there anything that someone can suggest that will help me out?
    GuhBeattie

    I leave my finger on long enough to see the eject symbol pop up and disappear. Still doesnt work.
    And now I have 2 ways to open my optical drive. Via iTunes andd by reseting my mac and keeping my finger on the mouse button.
    Not really practical and is annoying when I have so many programs open that I don't want to have to close.
    I will be ringing apple tech support to see if they can help me resolve this issue. I will keep you updated.
    G

  • CD/DVD drive wont take disk...NEW PROBLEM

    I went through all the discussion boards looking for someone who had the same problem as me and no one did! Two days ago my CD/DVD drive was working fine, then yesterday I went to insert a DVD and it would take. It goes all the way in, thats right ALL THE WAY in, so I know nothing is in the drive or obstructing it. I can push the disk all the way but the drive wont take it in and read it. I have to keep poking it with my finger to bounce the disk out. It is as if the "grabbing" mechanism is completely broken or something. I have tried re-booting but nothing seems to change it. Please help.

    This issue may require some qualified technician to replace the optical
    drive; depending on the usage and age of the computer, the unit may
    be wearing out or some part in there has failed. And depending on the
    age and use pattern of the computer, the hard disk drive may also be
    getting weak. {Sometimes, for a little more than the cost of one service
    replacement, a second can be performed at the same time.}
    If the problem is just some foreign object which somehow got into
    the drive, perhaps a good service tech could look inside & see it;
    maybe even remove some obstruction, if one exists in there.
    Otherwise, the options are probably limited due to the way the drives
    are compact and generally the computer would need to be opened
    up to get into them. Some independent service techs and small
    companies who know Apple products can do a good service and be
    able to restore functions. Some may be able to give you a fair price
    because they have access to the parts and are knowledgeable, too.
    The iBook series takes some effort and skill to get into them and do
    repairs, and not cause other damages as a result of this effort. My
    suggestion would be to inquire locally, if at all available or likely, for
    someone qualified; then inquire farther away. I had a good service
    from wegenermedia.com on my older iBook at a good price; and
    sent it across the continent via the US Post Office. A flat-rate box
    with bubble-wrap & other padding may be adequate...
    Estimates are subject to inspection in many cases, and at times,
    a part may be prohibitively expensive if the tech or company is
    not one who does this work often. wegenermedia is a specialist;
    there probably are a few others who do portable Apple repairs in
    out-of-warranty computers, to factory qualified specification.
    Good luck in this matter, & happy computing!

  • Dvd drive wont eject - using windows 7 - G50-70 i5

    Im having problems with my dvd drive.  Have seen a few similar posts on here but I cant get anything to work.  The drive did initially work, but now I have installed windows 7, it wont eject.  The drive can read discs.  When I press the eject button, the light comes on, and I get the usual noise of the drive, but it wont eject.  It will eject using a paperclip, but not using eject under my computer.  Ive installed the lenovo eject utility, but no idea how to use it, but I dont think that having to go into the bios everytime or to use a paperclip is acceptable on a new laptop.  Would be grateful for any tips to try before I send it back.  For example, where can you download a mat**bleep**a driver or firmware update? Ive searched but they dont seem to have a website.  All I seem to get is lots of utilities that want paying for downloading anything.  Many thanks for any help, Tristan
    Solved!
    Go to Solution.

    hi Tristan,
    Welcome to the Forums.
    AFAIK, when you press the eject button, it sends a signal to the logic board, and the logic board sends a function to the eject machanism to release the tray. From your observation, it's likely that there's a mechanical or other physical failure inside the ODD that's preventing the tray to eject.
    The Lenovo Eject Utility on the other hand is design for Thinkpads (haven't tested this on Ideapads units) and its function is the same when you right click on the DVD Icon and chooe Eject.
       - Sample image
    I recommend you contact lenovo and report your findings as you may likely need to send the unit for service.
    Support phone list
    More info:
    ODD - Mechanical Parts
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My cd drive wont open.

    i put a cd in my drive and now the drive wont open

    banhien wrote:
    Hi,
    There is a small hole in the front just below the drawer. You can stick a pin or paper clip in there and the tray will open .
    Regards,
    banien is correct, here is what it looks like on my G62.

  • Trying to upgrade from leopard to snow leopard.. my dvd drive wont read my disks, yet it plays music cds and movie dvd's...help!!

    I just purchased snow leopard and I evenually want to upgrade to lion.. I have to  put snow leopard on first in order to do that. I currently have leopard. I try to run my disks and they wont read, my DVD drive makes a ugly noise when it tries to read them.. I tried my original installation disk and it does the same thing.  But when I put in a regular movie DVD or a music CD it plays them fine without problems. I called customer support, and they suggested I take it to a apple tecnician... cant really afford that right now....has this issue happened to anyone???? any suggestions???? HELP!!!

    hi there angel..may i know did u find out what was the problem and how did u fix it? much thanks.

  • DVD drive not opening

    HI,
    I have HP 430 notebook that I use rarely. The DVD drive on drive is not opening by pressing button on dvd drive. MY machine is power on. Not sure if I need any special driver to open dvd drive on machine. The default microsoft driver with windows 7 professional are already on machine.
    I also get a warning sign next to bluetooth adaptor in device manager. Please let me know if I am missing any driver and where to pick them from.
    regards,
    Rajiv

    I don't know if you are missing any drivers, but here's the drivers page for the HP 430:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4ts.oid=5086738&ac.adm...
    Here's some troubleshooting info for opening a stuck optical drive:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootDisplay/?sp4ts.oid=5...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

  • DVD drive pops open

    The DVD Drive on my Pavilion DV6 laptop (Windows 7) pops open when I start up and intermittently after start up.
    I used the device manager function to disable the dvd drive and this stops the problem so I guess that one of the applications is opening the drive.
    Can someone please tell me if there is a way to identify which application is causing the drive to open.
    Regards
    Ed

    Was online with tech support this afternoon and we seem to have solved the problem. Here is what we did.
    First, modified the registry
    Please try the below steps
    Click Start on the Left Bottom of the Screen.
    Click Start Search
    Type “regedit” and Hit Enter
    On the Left hand Pane you can find H-Key-Local Machine.
    On the Left side of H-Key-Local Machine you can find “>” sign Click on that “>” Sign.
    You can find “System”, just click on beside its “>” sign.
    Where you can find “Current Control Set”, just click on beside its “>” sign.
    Where you can find “Control”, just click on beside on its “>” sign.
    Where you can find “Class”, just click on beside on its “>” sign.
    Please look for “{4D36E965-E325-11CE-BFC1-08002BE10318}”, just click on it(Not on the arrow beside it)
    In the right side of the pane you can find ‘Upper Filter’
    Please select ‘Upper Filter’and delete it.
    Then choose the Lower filter and delete it.
    In my case, I didn't have the Upper Filter, but I did have a LowerFilters
    I deleted it and restarted and the drive still popped open but this may have helped for the next step.
    Secondly, I opened up the device manager from the control panel and removed the "hp DVD" device. Afterward, I rebooted. The device automatically got re-installed.
    For now, the door seems to be staying shut. We'll see how it goes over the next few days.

  • Dvd drive wont accept disc

    Please Help,
    My brand new 4 day old Macbook's dvd drive won't accept a dvd. Has anyone run into this yet ? Any easy fixes ? or does the drive need to be replaced ? Any help would be appreciated. Thanks

    1.
    Go into Spotlight from the top of your MacBook on the menue bar.
    2.
    And search for "CDs & DVDs" (It's also in the System Preferences)
    Click on it and a small CDs & DVDs window will pop up with options of what happens when you insert a disk into the drive
    3.
    By then, try inserting a disk in (while that window is open. This kinda wakes up your drive to accept the disk). It should accept it.
    4. If nothing happens, then manually open the program that should be opening when you insert the disk or go to Finder (Eg. if it's an audio disk, then open iTunes)
    5.
    If opening the program still does not activate the drive to start spinning the disk, then close the programs and windows you opened, and repeat step 1-4 and the disk should be spinning and automatically opening the proper program.
    Hope that helps!

Maybe you are looking for

  • Help needed for SQL query

    hello , I am a beginner in terms of writing sql queries. I hope some body can help me out. I have two tables mysql> desc user_group_t; ---------------------------------------------------+ | Field | Type | Null | Key | Default | Extra | --------------

  • Mac Pro Early 2008 Crash on Boot Up

    I have a Mac Pro early 2008 running OSX 10.8.5, and yesterday morning for seemingly no reason I had a screen corruption and freeze up, a kernel panic and then it rebooted itself. I have tried all of the memory( no flashing LED over power switch), cle

  • Digital Signatures Help Requested

    I looked through the forums and there was one thread not too long ago that talked about digital signatures but didn't seem to focus on this particular problem, so I figured I'd start a new one hoping someone would have some advice. We receive a docum

  • Need help in displaying a region in  a page

    Hi, I'm looking for the following scenario. Scenario:_ 2 Regions "region_ABC" , "region_XYZ" are dragged and dropped on EM page "PAGE_1". When the "PAGE_1" is displayed first time only the region "region_ABC" will be displayed. When a specific radio

  • How to know thw document type in a blob data type

    Hi I'm creating a Picture resizer to resize all images in my Oracle Database Blob. Some records contain MS word document and not an image. Is it possible to know what is the type of the document save on the blob before I try to resize the image. I'm