L305D-S5934 Has formatted hard drive, can I load recovery disk from a different machine?

Hi,
I have an older L305D (can't remember the sub group model, but it does not have the web cam). The LCD screen went out so I bought a L305D-S5934 with a formatted hard drive. I swapped my old hard drive into the new computer, but it will not boot up. It tried to recover, but that failed. Can I make a recovery disk with my old computer to use in the new one, even though they are different sub models? The new computer has a Windows license on it. If I can't make a recovery disk with the old one that will work, can I get a copy of Vista Home and use the license on the new computer to install it or does the license only work with the recovery disks? Once I have an operating system installed, I know I can get the right drivers from this website. Any help/ideas would be appreciated! I would rather not have to buy a recovery disk through Toshiba if I can avoid it.

Satellite L305D-S5934
Can I make a recovery disk with my old computer to use in the new one, even though they are different sub models?
That won't work.
can I get a copy of Vista Home and use the license on the new computer to install it or does the license only work with the recovery disks?
The OEM key won't work with a retail version of Windows. (And with the recovery discs it's unnecessary, because that one is pre-activated.)
The recovery media from Toshiba costs less than the product key for the retail installation DVD. And you don't need to mess around adding drivers and utilities.
Order Toshiba Recovery Media
-Jerry

Similar Messages

Dead Hard Drive / Windows 7 / No Recovery Disks for HP G61-632NR Notebook PC

My harddrive is completely DEAD. Is there a way to find out using my serial number if my laptop came with 32 bit or 64 bit? There is NO information at all in the documents I kept with the box. Only the receipt. I see I can only order recovery disks for 64 bit online as 32 bit is not available. I don't' want to pay for them if they won't work. I'm so frustrated this laptop is only a little over 2 years old.

Thanks so much!

2007 iMac, replaced hard drive, can't recover old files from old hard drive!

So I have a 2007 intell imac, the hard drive went out, I replaced it and bought a thermalake blacx hard drive doc to get my files off the old hard drive. I run Disk Utility, it can see the old hard drive but it can't repair it or verify it. Do I need to get a third party to get the info off hte old hard drive??? HELP!!!HELP!!!!!

You could use a data recovery service but that's going to be really expensive. You could also try a data recovery software like DataRescue III http://store.apple.com/us/product/TX415LL/A/prosoft-data-rescue-3
Or DiskWarrior http://www.alsoft.com/diskwarrior/
Either might help, I prefer DiskWarrior, but it's also possible that neither will. A hard lesson learned regarding backups I suppose.

INSATLLED NEW HARD DRIVE DON'T HAVE RECOVERY DISK

Don't have the recovery disk for my laptop

Hi:
You can see if you can get a set of recovery disks by reading the info at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
If your notebook came with Windows Vista or Windows 7 and you can read the 25 character product key on the bottom of your notebook (DON'T POST IT), I have a workaround where you can make your own genuine Vista or W7 installation disk and use the Windows product key on your notebook to activate the installation.
Just let me know if you have Vista or W7 as the instructions are vastly different.
Paul

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

Cd/dvd drive not found, can I format hard drive with an external cd/dvd drive. If so how?

My cd/dvd drive quit working and is not found in device manager so I purchased an external cd/dvd rw. Now I am having other issues with installing software and windows updates so I would like to format hard drive. Can this be done with external cd drive, if so how do I boot from it? presario v6000 laptop windows vista 32bit os.

Restart the notebook >> start tapping F10 key >> go to configuration menu >> Boot Order >> select the Ext DVD drive as 1st boot device >> save and exit >> Insert the recovery disc >> restart the PC >> press any key when prompted >> follow the instructions..
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Can you really not use a windows-formatted hard drive with Time Machine?

I still have people in my household that think Windows is the way to go, and so they have used all the hard drives to back up their stuff.
There is still a reasonable amount of room on one of the hard drives for me to do a Time Machine backup, however it is obviously formatted to Windows.
Is there ANY way the hard drive can be used with both systems?
It's a bit of a bummer if I have to shell out for a new one just for my MacBook!
Thanks

Do you mean you want to connect a USB drive to the TC? If so, it will recognize a disk formatted in FAT32, but not ExFAT or NTFS.
If you mean you want a Windoze-like partition on the TC's internal HD, that's a bit trickier, since it can't be partitioned. But you could create a disk image on it via Disk Utility, formatted MS-DOS (FAT) aka FAT32, or ExFAT (I'm not entirely sure if ExFAT would work in a disk image there, but it might.)

My Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

my Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

You want system, data, backup etc. Make good use of the four internal drive bays.
You will have to use Disk Utility to ERASE or click on drive and use PARTITION to make it Mac writeable.

HT4796 Can i use windows migration assistant to transfer files from a windows formatted hard drive to a mac?

I have a windows formatted hard drive and a macbook pro. I was wondering if i could use the windows migration assistant to transfer files from my hard drive to the mac

No.
Just connect the drive to your Mac. The Mac can read most Windows formats (it cannot WRITE Windows New Technology File System (NTFS) formatted drives.

Thunderbolt partitioned and formatted hard drive not recognized on USB2/3

I have a MBA (mid 2012) and recently purchased a Seagate Desktop Thunderbolt Adapter (STAE129), a Seagate Backup Plus 4TB USB 3.0 external drive (STCA4000100), and Apple Thunderbolt cable. The 4TB hard drive can be separated from the USB 3.0 adapter and the drive placed on the Thunderbolt adapter. I created two partitions (3TB and 1 TB) on the 4TB drive while it was mounted on the Thunderbolt adapter and formatted them Mac OS Extended (Journaled) using partition map scheme GPT. Everything works as expected, the drive hits r/w speeds in the 180 MB/s range (using Blackmagic Disk Speed Test), and no issues at all transferring data to the 3TB partition and using the 1TB partition for TimeMachine.
However, if I disconnect the hard drive from the Thunderbolt adapter and place it on the USB 3.0 adapter and connect it to my MBA, Mountain Lion says "The disk you inserted was not readable by this computer and gives me the options to Initialize, Ignore, or Eject. Going into Disk Utility app, the drive shows up without the partitions I created when the same drive was mounted to the Thunderbolt adapter (just shows disk1s1). In fact, the drive label (Disk Description) is different too and the Partition Map Scheme now shows MBR!
To try work-arounds, I went ahead and repeated the partitioning and formatting steps with the drive attached via USB 3.0 and all works fine until I put the drive back on the Thunderbolt adapter where once again OSX reports that the disk is not readable. I've even tried a single partition with no luck. In short, the drive partitioned and formatted on Thunderbolt is unrecognized under USB and vice versa.
Shouldn't the disk preparation and data be consistent across these different interfaces? I would think so. My biggest concern is that if I had a failure in the Thunderbolt setup (assuming the drive itself does not fail), then I can't access my data. This is not a very comfortable situation.
I'm assuming I've overlooked a very basic detail. Appreciate any steer to solve this problem.
Thanks,
Rob

Thanks for that, I recently ran into the same problem. I even chatted with Seagate tech support and they didn't know the answer.
My situation is a bit different from you. I bought the 3 TB Thunderbolt version of the drive directly and then purchased a USB 3 adaptor seperately. You see, I still own a 3 year old Macbook Pro that doesn't come with a Thunderbolt port. I was looking to upgade to a MacBook Air later. I thought that I might as well buy the TB version now.
In anycase, my old MacBook Pro won't see the drive when I use the USB3 adaptor. I get the same exact error message as you did. I can't really test it on Thunderbolt since I don't have one. I'm going to go install the Thunderbolt drivers now and hopefully, it will recognize the drive afterwards. I'll let you know what happens.
BTW, I was thinking of reformatting the drive with NTFS so that I can use the drive on PCs. My mac has the NTFS drivers loaded so it's no problem. I hope this won't screw up the Thunderbolt connection later when I do get the Macbook Air?

HP System Recovery DVD incorrectly formats hard drive (WIN Vista HP SP1 64-bit 510141-001)

HP Pavilion DV4-1225dx
Vista Home Premium 64-bit
AMD Turion x2
I had previously posted the issue as "HP System Recovery Fails on new HDD", however it appears that the reason it is failing is due to incorrect formatting of the hard drive:
Went to purchase the oem HDD @ Tiger Direct (Hitachi 0A56415 Travelstar 5K320 Mobile Hard Drive - 2.5", 5400 RPM, SATA 3G, 250GB, 8MB Cache) but found it was out of stock. I purchased the suggested replacement (WD Blue 320GB Mobile Hard Drive - Designed for everyday computing - 2.5", SATA 3Gb/s, 5400RPM, 8MB C...)
I have attemptted the System Recovery several times each failing with errors. But after each failure the HDD is found to be incorrectly formatted as documented in the following link:
System Recovery Fails on new HDD
hp G71-340US WIN 7 HP 64 Bit
hp pavilion dv4-1225dx VIsta HP 64 Bit
hp pavilion zd7000 WIN XP Pro
hp pavilion xv886 WIN Millennium / WIN XP Pro
hp deskjet 6980xi
hp pavilion xt236 / ze4200 WIN XP Media Edition

Slolearner,
After doing a little research, I believe your issue may be related to your new hard drive being an AF (Advanced Format) drive. Please see "WD Scorpio® Blue™ SATA/PATA Hard Drives", which indicates your WD3200BPVT may an AF drive.
Please see "Cannot Recover the PC after Replacing the Hard Drive with an AF Drive (Windows 7 and Vista)" for information on this subject. While this document isn't for your specific computer, it is generic enough that it applies to your situation. If you wish to use your HP Recovery Discs successfully, you may need to purchase a non-AF drive.
If your computer boots into Windows, please see "Identifying an Advanced Format Hard Drive" to download and run the HP Advanced Format Hard Drive Information tool.
If it is an AF drive, please see "Preparing Advanced Format Hard Drive for Windows" and "Improving the Performance of an Advanced Format Hard Drive" for more information on the subject and possible steps to be taken to resolve your issue.
Lastly, it may be necessary to follow Paul_Tikkanen's advice and install Windows Vista from a Microsoft Windows Vista installation disc as follows;
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
If you can still read the 25 character Microsoft Vista product key on the bottom of your PC, you can make your own plain Vista installation media and use that to at least get the OS on your PC.
Here is how to do that if you can read that key:
Please click on the link below, click on the Windows Reinstallation Guide [27-07-2013] pdf link on the upper left of the page and then read the instructions for doing this starting on page 302.
http://philipyip.wordpress.com/dell-community-forums/
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
You may also consider purchasing a copy of Windows 7 and installing that instead. Windows 7 SP1 has much better support for AF drives than the previous versions of Windows.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

About to format hard drive. How do I preserve I-Tunes?

Hi,
*About to format hard drive. How do I preserve I-Tunes*
Apologies if this has been asked before, but I need reassurance that I will not make an expensive mistake.
I have iTunes installed on my PC, but the library and any original music files are stored on a NAS external device.
What do I need to do in iTunes (or anything else) before I reformat my PC drive?
In addition, I am guessing, but I figure that that afterwards I reinstall iTunes and reenter some settings and I can make connection with my Library again? Is that correct?
Thanks in advance
flobbyblob

Are you certain that the iTunes folder containing you library databases is on the external drive?
If you have the iTunes folder containing your current iTunes Library.itl and iTunes Music Library.xml in My Music on the C: drive, then you need to back that up.
If you are certain everything is on the external drive then all you need to do with your PC is deauthorise it before reinstalling Windows.
You asked something else:
Yes after reinstalling Windows and iTunes, you redo the settings you used to connect to your library on the external drive. You will also need to reauthorise your PC.
Message was edited by: polydorus

SOLARIS OS Support for Advance Format Hard Drives

Hello,
I am fairly new to the UNIX Operating System so I'm hoping that someone can help me. Does Solaris support the new Advance Format hard drives (4k sector boundaries)? I cannot find any mention of the advance format drive in the Oracle literature. I believe, based on my recent reading that Open Source Solaris depends on ZFS to handle the support of the new 4kbyte sector size.
Thank you in advance for any information you can supply.
Steve

Moderator Action:
This post has been moved to the Solaris 10 forum.
@ O.P.,
You originally posted your inquiry to the Clustering forum, which has nothing to do with the topic of disk cluster size.
Glance at the documentation for Oracle Cluster 4.0 to see what clustering is all about.

My iMovie 9 will not install after formatting hard drive and installing Mavericks what are my options?

I have not used my iMovie ever since I formatted my Hard Drive and installed Mavericks. I went to put the disk in from when ilife was originally shipped with the computer and it just spits the disk right back out of the superdrive. Is there anything I can do to not have it just spit a disk out without asking for user input. Any help would be greatly appreciated, I don't want to buy the new version.

Here are the original specs of your computer. The specs state that the original hard drive was 320GB. You have since replaced the factory drive with a 1TB (1000GB) hard drive. The HP recovery routine seems to have issues with hard drives that deviate from the original size. The partition issues you are experiencing may be a result of this. As for the rest of your issues, it sounds like the SP3 install went bad.
If I were you, I would consider reinstalling the OS using your recovery discs by doing a complete "destructive" reinstall/recovery. Afterward, I would post the size of both the c: and d: partitions... and go from there.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Time machine froze while formatting hard drive.

I have an Iomega HDD 80GB USB 2.0 External Desktop Hard Drive. I have used this hard drive before on both my Mac and a PC, and it worked fine. The other day, I plugged in my external hard drive so that I could use it to back up my system on Time Machine. The external drive had some files on it already, so when I plugged it into my Mac, Time Machine said that I would have to format it. So I went ahead and allowed it to start formatting the disk, but then system preferences froze while it was formatting. I couldn't eject the drive so I had to force quit and restarted my computer. Then when I plugged in the external drive again, the computer said that it could not read the disk. So I opened Disk Utility and tried to reformat the hard drive. However, Disk Utility froze about a minute after it started reformatting the external hard drive, while the progress bar was on "Creating partition map". Once again, I had to force quit the application and I restarted my computer. Upon plugging my external hard drive in AGAIN, the computer said it could not read the disk so I tried reformatting the hard drive (through Disk Utility) yet another time, and it froze again. I tried this again and it froze again. I tried plugging the hard drive into a PC, and it did not show up in "My Computer." It did, however, show up in Device Manager, and Device Manager said that the device was working fine (I also checked all of the USB Root Hubs etc, as per the instructions in the Iomega support Answer ID 1235). So basically, the computer said the device had no problems, yet there was no way I could actually see any of the files on the disk (or format it) because it wasn't showing up in My Computer. And I can't seem to format it on my Mac because it freezes up every time.
Is there any way I can format this hard drive?? Is it corrupted and unusable? What are some other things I can try?
Edit: I also tried to reformat the drive by partitioning it in Disk Utility (following the directions on the Iomega support article) and Disk Utility froze when the progress bar said "Creating partition map."

A TM drive must be partitioned using GUID and formatted Mad OS Extended, Journaled. Do this:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you want to use the drive on Windows you will need to create two partitions rather than one. After performing the partitioning set one partition for Mac OS Extended, Journaled and the other for MS-DOS. TM will backup to the OS X partition. A TM backup volume should be at least twice the capacity of the drive it backs up, so be sure the OS X partition you create is large enough to use for TM. The remainder of the drive's space can then be allocated for a Windows volume.

L305D-S5934 Has formatted hard drive, can I load recovery disk from a different machine?

Similar Messages

Maybe you are looking for