L440 System Update / Update retriever Differences/Issues

I have Got some issues on the L440 model using Update Retiver / Thin Installer  model is . (20AS)
Update retriever is not showing the following that system update shows
Thinkpad power manager v6.64.2
BIOS update
Update retriever does show
Intel WLAN Driver - 7[64] V16.10.0
But thininstaller does not show this when run on the machine!!!
It Also has problem installing
Intel SATA Controller AHCI Driver - 7/8[64] - V12.8.1.1000
Warning 2014-03-03 , 03:15:26
 at Tvsu.GenericPackageInstaller.InfInstaller.InstallUpdate()
 Message: An error ocurred trying to install Intel SATA Controller AHCI Driver - 7/8 [64] update
Can anyone help with this ?

Can you do another search through UR and see if the missing content is showing up now?  We had some issues with the power managment driver and also the Intel WiFi driver packages.  There is a new Intel WiFi package that targets properly to all the supported models.  You will see in UR one package that can be used for intial installation on all models and one package that should be used for upgrading a previous driver for non-7260 cards.  If you are doing deployments of new systems just get the first one.

Similar Messages

  • Update of CLOB column issue

    I am not sure if this is the correct forum for this question, so please forgive if this is posted in wrong forum.
    I am new to working with CLOBs in Oracle. The procedure updates a CLOB column which stores large XML files. The XML files are first moved to the /u04 directory, then we execute the procedure which looks for the XML in /u04, then uses those XML files to update the CLOB column.
    The procure works fine in our development environment, but doesn't work in our System Test box. No exceptions are thrown in Sys Test, but when we check the CLOB column it's NULL/empty.
    Both Dev and Sys Test environments are on the same physical server.
    Is there something in the database setup I should be looking for which may cause this difference in functionality?
    Code is below. I'm sure it could be better but this is my first go-around with CLOBs.
    Any help is greatly appreciated!
      --open CLOB used to clear out old XML in CLOB column
       dbms_lob.open(v_pre_clob, dbms_lob.lob_readwrite);
       -- prep XML CLOB column for update
       UPDATE REPORT_TBL
          SET REPORT_XML = v_pre_clob
        WHERE REPORT_ID = p_rep_id;
       --Close pre-update CLOB
       dbms_lob.close(v_pre_clob);
       --get a reference to the XML CLOB that needs to be updated
       select report_xml
         into v_clob
         from report_tbl
        where report_id = p_rep_id for update;   
       --open the target CLOB and source report xml file in /u04
       dbms_lob.open(v_clob, dbms_lob.lob_readwrite);
       dbms_lob.open(v_report_xml_file);
       --Load the contents of the xml file in /u04 into the CLOB column
       dbms_lob.loadclobfromfile(v_clob, v_xml_file,
                                 dbms_lob.lobmaxsize,
                                 v_destination_offset, v_source_offset,
                                 nls_charset_id('US7ASCII'),
                                 v_language_context, v_warning_message);
       --Check for the only possible warning message.
       if v_warning_message = dbms_lob.warn_inconvertible_char then
            dbms_output.put_line('Warning! Some characters couldn''t be converted.');  
       end if;
       --Close both LOBs
       dbms_lob.close(v_clob);
       dbms_lob.close(v_xml_file);
       null;
       EXCEPTION
          WHEN OTHERS THEN
             v_return_code := SQLCODE;
             v_return_mesg := SQLERRM;
             DBMS_OUTPUT.PUT_LINE('PROCEDURE update_xml_from_file');
             DBMS_OUTPUT.PUT_LINE('RETURN_CODE = ' || v_return_code);
             DBMS_OUTPUT.PUT_LINE('RETURN_MESG = ' || v_return_mesg);

    Sorry, pulled that code from development where it was working.
    The issue was the GRANT on the /u04 directory.

  • Macbook Pro Retina display says "No batteries available" after legitimate system software update

    Issue Description
    On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
    Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
    It was delivered August 8, 2012. It cost me $3,265.16
    I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
    It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
    In the one year since I bought it, I have had only 2 issues;
    • A case of display flickering that resulted after a system software update on August 28, 2013
    (Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
    • A case of battery failure that resulted after a system software update on October 11, 2013
    (Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
    Symptoms after system software update
    • Battery Icon on status bar disabled with a message "No batteries available"
    • Battery not charging
    • LED on the Magsafe power adapter no longer show
    • Keyboard backlights no longer show
    • Notebook fan loud/noisy and permanently at high speed
    • Date and time reset to a date in the past at each restart
    • Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
    • An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
    Recommendations from Apple Support
    • Perform SMC Reset (http://support.apple.com/kb/HT3964)
    (Done - no change in status)
    • Run Disk Utility
    (Done - no errors found)
    • Run Apple Hardware test (http://support.apple.com/kb/HT1509)
    (Done - no errors found, no change in status)
    • Visit Apple Store
    (Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
    • Check System Report/Hardware/Power
    (Done - Health Information/Cycle count:0, Battery installed: No)
    • Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
    (Done - no change in status)
    Comments and additional Observations
    Please note the following;
    • All of the symptoms above appeared after a system software update on October 11, 2013
    • This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
    • The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
    • Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
    • The said update was not interrupted or anything of the sort
    • On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available" 
    I make the following deductions solely based on my observations
    • An apple authorized system software update broke the system
    • The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
    • It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
    • The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
    • The symptoms match what an SMC reset should resolve according to Apple documentation
    • This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
    Summary;
    The system is running OS X 10.8.5
    I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
    I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
    I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.

    Issue Description
    On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
    Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
    It was delivered August 8, 2012. It cost me $3,265.16
    I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
    It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
    In the one year since I bought it, I have had only 2 issues;
    • A case of display flickering that resulted after a system software update on August 28, 2013
    (Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
    • A case of battery failure that resulted after a system software update on October 11, 2013
    (Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
    Symptoms after system software update
    • Battery Icon on status bar disabled with a message "No batteries available"
    • Battery not charging
    • LED on the Magsafe power adapter no longer show
    • Keyboard backlights no longer show
    • Notebook fan loud/noisy and permanently at high speed
    • Date and time reset to a date in the past at each restart
    • Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
    • An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
    Recommendations from Apple Support
    • Perform SMC Reset (http://support.apple.com/kb/HT3964)
    (Done - no change in status)
    • Run Disk Utility
    (Done - no errors found)
    • Run Apple Hardware test (http://support.apple.com/kb/HT1509)
    (Done - no errors found, no change in status)
    • Visit Apple Store
    (Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
    • Check System Report/Hardware/Power
    (Done - Health Information/Cycle count:0, Battery installed: No)
    • Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
    (Done - no change in status)
    Comments and additional Observations
    Please note the following;
    • All of the symptoms above appeared after a system software update on October 11, 2013
    • This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
    • The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
    • Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
    • The said update was not interrupted or anything of the sort
    • On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available" 
    I make the following deductions solely based on my observations
    • An apple authorized system software update broke the system
    • The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
    • It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
    • The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
    • The symptoms match what an SMC reset should resolve according to Apple documentation
    • This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
    Summary;
    The system is running OS X 10.8.5
    I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
    I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
    I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.

  • Surface Pro 3 "System Hardware Update - 27/03/2015" never finishes installing; blocking 10041 - 10049

    The "System Hardware Update - 27/03/2015" is stuck in an "Installing updates..." state
    It stays in this state, even as I have rebooted many times. There's no install activity happening in the background. There's nothing I can see in the event log.
    I rebuilt the entire machine back to 8.1 from a clean recovery USB stick, then updated up to Win 10.10041 again, and got the same issue.
    It's blocking me from getting any other updates, like getting up to 10049
    -- Tatham @tathamoddie http://tath.am

    Hi Tatham,
    Thank you for your feedback.
    Regarding Surface Pro hardware update, it is recommended to seek help at the surface support forum:
    http://answers.microsoft.com/en-us/surface/forum
    Besides, I would recommend to install Windows 8.1 and then update the hardware from there, after that, enable Hyper-V and build a new Virtual Machine for Windows 10, or you may try to native VHD boot of Windows 10.
    Some reference:
    How to Dual Boot Between Windows 7 (or Windows 8.1) and Windows 10 Technical
    Preview (VHDX)
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HT204244 Is a MacBook Pro (non-retina from 2011) also updated for the Thunderbolt issue? Or Retina MacBooks only?

    Is a MacBook Pro (non-retina from 2011) also updated for the Thunderbolt issue? Or Retina MacBooks only?

    Go to Geekbench
    http://browser.primatelabs.com/mac-benchmarks
    and check out the relative values for the system you're currently using versus the one you're going to buy. My guess is a fullly spec'd MBP Retina will do the job, but you're undoubtedly better qualified than anyone on here to tell what kind of a machine you need.

  • We bought a new prepaid phone on 10/5/14 at a Verizon store had an existing phone number transfered and the phone can not be activate. When will the system be updated? We have lost 2 days of service.

    We bought a new prepaid phone on 10/5/14 at a Verizon store.  Had an existing phone number transfered and the phone can not be activatde. When will the system be updated? We have lost 2 days of service and now cannot use the original phone due to moving service to Verizon.

    The exact same thing has happened to me! The customer service reps keep saying there is nothing they can do until their system upgrades are complete and they can't tell me when that will be! I need my phone number back!!! Somebody please help with this issue!

  • System Center Update publisher 2011 command line

    Hi, I was wondering if there was any command lines and switches or powershell commands to automatically import catalogs and publish updates with System Center Update publisher 2011
    joeblow

    Hi,
    This forum is focusing on the issues of WSUS.
    Due to your question is more related to the System Center, to get better help, please post your question on the forum below:
    https://social.technet.microsoft.com/Forums/en-us/home?forum=configmanagersecurity&filter=alltypes&sort=lastpostdesc
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • The system BIOS Updated failed

    I have an HP Elitebook 820 G1.
    Every time I try to upgrade the BIOS TO 1.04 , it says "The system BIOS Updated failed. Unable to open the Bios Signature file."
    * I tried unsuccessfully using the HP_TOOLS And then the USB method.
    I can't also update to Win 8.1. Error 0xC1900101-0x30017
    INTERNAl_POWER_ERROR.
    Need help please, this is giving me headache.
    Thank you and Best regards,
    Ozy

    OZY
    uninstall Norton better remove it for the update
    https://support.norton.com/sp/en/uk/home/current/solutions/kb20080828154508EN_EndUserProfile_en_us
    You must install all Windows 8 Update, before you windows 8.1 Update use
    Never use MS Defender and other antivirus software.
    After successful system update, install this software
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Why is it when i update my status on facebook from iohone it splits the updates into two differents boxes with some funky symbol. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app.

    why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK  i have already update my phone too.
    if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload,  . But its a pain of not using my IPHONE APP for facebook cause it does that.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • HT4623 I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doen's offer me another update!

    I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?

    ayrosa wrote:
    I still have an iPad 1, and need to update to iOS 7 
    Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1

  • System Hardware Update - 1/27/2015

    On my Surface Pro 3, I have a "System Hardware Update - 1/27/2015" that continues to be listed as available and continuously fails. Any idea what this is, and why it's failing? I've provided the precise listing, and it doesn't have a KB number.

    On Tue, 24 Feb 2015 12:15:04 +0000, colakid wrote:
    Go to the vender website, check what the system update my be, Not sure about this, since all the complaints with system updates crashing after windows update. It is possible Microsoft has done something to prevent the update.
    The vendor in this case is Microsoft. If you'd read the entire thread you'd
    notice that we're discussing a firmware update for the Surface Pro 3.
    Paul Adare - FIM CM MVP
    Once again your arrogance stepped in your way. As I said go to the vendors website I'll post if for you.
    Your chipset is intel and graphics you may also go to intel and see if there are drivers for your graphics. Which is included in the vendor list.
    http://www.microsoft.com/en-ca/download/details.aspx?id=38826
    http://www.intel.com/support/utilitytools.htm?_ga=1.232947806.1107013541.1424801875
    Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs      
    Note:There are multiple files available for this download.Once you click on the "Download" button, you will be prompted to select the files you need.
    File Name:
    Surface Ethernet Adapter.zip
    Surface Gigabit Ethernet Adapter.zip
    Surface Pro 1 - January 2015.zip
    Surface Pro 2 - January 2015.zip
    Surface Pro 3 - January 2015.zip
    Surface Pro 3 January 2015 MSI.zip
    Surface Pro 3 KB2978002.zip
    Windows8.1-KB2969817-x64.msu
    Date Published:
    2015-01-30
    File Size:
    46 KB
    57 KB
    372.8 MB
    154.0 MB
    158.3 MB
    145.6 MB
    7.5 MB
    343 KB
    Spec sheet
    CPU: 1.9GHz Intel Core i5-4300U (dual-core, 3MB cache, up to 2.9GHz with Turbo Boost)
    Graphics: Intel HD Graphics 4400
    RAM: 8GB LPDDR3
    Screen: 12-inch, 2160 x 1440 multi-touch (ClearType, 3:2 aspect ratio)
    Storage: 256GB SSD
    Ports: One USB 3.0, Mini DisplayPort, microSDXC card reader (up to 128GB), headphone/mic jack
    Connectivity: 802.11ac Wi-Fi, Bluetooth 4.0
    Camera: Two 5MP webcams (1080p HD video)
    Weight: 1.76 pounds
    Size: 7.93 x 11.5 x 0.36 inches (W x D x H)

  • System software updates possible?

    recently whwnever I try to opdate my system software from the finder the App Store app comes up. Is this the new way or .... it never says my system needs updating nor does it update my 4S, 3gs, iPad, Macbook Pro or this imac.

    With Mountain Lion the App Store is the method by which you purchase and upgrade purchased software. It also replaces the old Software Update preferences for system upgrades/updates. However, the App Store has nothing to do with iDevice software. For that you use the iTunes Store.
    If you are using Lion or earlier system updates continue to come by way of Software Update.

  • 10g-cvs update/import new files issue

    Hi all,
    when I update a folder in jdev 10g, it doesn't open the new checked in files in the environment
    in the old 9i I used to click on 'update folder' and the tool prompted me 'open the new files in the active project?'
    now if I update a folder, it just update the already opened files,without importing the new ones
    any workaround?
    thanks in advance

    Hi,
    Due to a customer support request, the behavior of prompting to open newly checked out files in the active project was removed when performing CVS update on a folder. If the project file is version controlled and gets updated at the same time, the changes are very difficult to consolidate. For the best CVS experience, we recommend using projects which scan source paths to determine their contents (see Project Properties / Input Paths), and manually refreshing the navigator when new files may have resulted from an update operation.
    This issue is being tracked, and we'll keep it in mind.
    Thanks.
    Paul. JDev Team

  • HT4943 I paid to subscribe to Ski Mag and Ski Racing but neither subscription has ever updated beyond the first issue.  Subscription is active but there never is a new mag...

    I paid to subscribe to Ski Mag and Ski Racing but neither subscription has ever updated beyond the first issue.  Subscription is active but there never is a new mag...
    They got the money but there is no monthly subscription and it says the subscription will expire in Feb!

    Hello ISXDesign,
    Thanks for the question, and welcome to Apple Support Communities. I understand that you are having issues redeeming a subscription that you have paid for. The best option will be to report an issue with your purchase:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Thanks,
    Matt M.

  • ABAP Systems stopped updating SLD

    Last week I added my dev PI SLD system as a data supplier to my existing Solution Manager based SLD.  Up to then my ABAP and Java systems were regularly updating their entries in the Solman SLD.  After adding  the dev PI SLD, I see updates about the PI landscape's ABAP systems in Solman (previously not defined) and I get regular updates from all my Java systems but the updates from ALL my non-PI ABAP systems have stopped. 
    I have checked in RZ70 and done test runs etc but nothing seems to make the data actually appear in my Solman SLD.  My Java stacks, including my production and dev Solman systems appear in the dev PI SLD as Java systems.  The Solman systems are dual stack and appear under both ABAP and Java systems in the Solman SLD but only the Java stack appears in the PI SLD.
    Any ideas what I can have done to stop the updates reaching Solman's SLD?
    Why only ABAP?
    Why does Solman SLD get updates from PI SLD about its ABAP stacks?

    <h1>I have:</h1>
    <h2>* checked all RFC destinations</h2>
    <h2>* run RZ70 in the ABAP system to push the data manually without error messages in the job log, SLD log or SM21 system log</h2>
    <h2>* restarted the Solution Manager system containing the SLD and rerun RZ70</h2>
    None of these basic checks have corrected the situation. 
    In desperation I deleted the connection from my Solman SLD to the PI SLD overnight.  The PI SLD system has still managed to do an update into the Solman SLD this morning for it's own ABAP stack.  It didn't update the QA PI data and none of the other 29 ABAP systems have updated either. 
    NOTE that this problem doesn't just affect one ABAP system.  I have 29 ABAP systems defined in my Solman SLD (some are deactivated but most are live) and none of the live ones are updating.  This has got to mean that there is something wrong in the Solman SLD, not the ABAP systems, but the only thing that has changed, to my knowledge, was the addition of the PI dev systems SLD as a data supplier.
    <h1>A question.</h1>
    If I want my Solman SLD to be the repository of administrative data but I want my PI dev SLD to know about all systems, in which system should I be adding a data supplier pointing to the other?

Maybe you are looking for