L505 - nothing but a white screen

Hello everyone,
I need help. My L505 is displaying nothing but a white screen. I turn it off, turn it back on and there's nothing but a white screen. I can't do anything to get rid of it. I am unable to access my home screen. All I have is a white screen. Any help or suggestions would be greatly appreciated
Thanks,
Steve

Try these suggestions:
What can I do if my Windows 7 or Windows Vista laptop won't start?
- Peter

Similar Messages

  • My ipod is 8gb and I downloaded the sims 3 on it and i thought it was done downloading but it's nothing but a white screen. Cant shut it off or try to relaod anything.....please help!! :(

    My ipod isnt working at all....nothing but a white screen. I already paid for the application and cant even use it.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • When updating to the new iOS my ipod died and now I have nothing but a white screen that won't turn off and itunes now doesn't recognize it

    When I was updating my ipod touch to the new iOS last night it died and now I have nothing but a white screen. iTunes no longer recongnizes the device and it won't turn off when I hold the power button or when I hold the power and home screen button.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • ITunes store won't load. The progress bar freezes at about 50% and I get nothing but a white screen.

    I'm running iTunes 10.5 beta 7 but this issue has been happening since I was running 9.  One day I clicked on a link for an app I saw on techcrunch and it pulled up in iTunes as being in the UK store.  I clicked ok and my iTunes hasn't worked since.  I can log into my account but can't access anything in the store or Ping.  I've googled this issue and found some similar sounding stories but none of the solutions have worked.  I've uninstalled and reinstalled, turned of the itunes store in parental settings and checked "except for iTunes U", I've uninstalled apple aplication suport and installed safari and every other option I have found and nothing has worked.
    Sometimes if I let it sit long enough what looks like an unstyled version of the store comes up but is completely unusable.
    Just to be clear, this has been happening since before I was running any beta software or OS.
    Any help would be greatly appreciated.

    Thank you gchin.
    I emailed apple support and they got back to me, I did what he said and it's fixed! SOLUTION found- see below.
    I said:
    "I can't access the iTunes Store. When I click on it the progress bar stops at 50% and I'm left with a blank white screen (no error msg). I have uninstalled and reinstalled, run the iTunes diagnostics (it said all was ok), gone through all of the online help material and I've tried turning off my firewall. Nothing works. I can't sync my iphone either (stops on verifying iPhone so I think it's getting stuck on trying to contact the store). Plzz help."
    They replied:
    "Greetings from Apple iTunes Store Customer Support! I am ########.
    I understand that you have had issues accessing the iTunes Store. I know how eager you are to have this issue resolved. I will certainly assist you.
    #########, for this, I recommend that you attempt to resolve this issue by once again uninstalling iTunes and QuickTime, and then reinstalling the latest version of each. To do this, first ensure that you are logged in to an Administrator user account on your computer, then follow the instructions in the appropriate article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista:
    http://support.apple.com/kb/HT1923
    Note: Titles you purchased from the iTunes Store or imported from CDs are saved in your iTunes folder by default and are not deleted by uninstalling iTunes. Backing up your iTunes Library regularly is recommended.
    After successfully uninstalling iTunes and QuickTime, please ensure you have upgraded to the latest Service Pack for Windows by installing all updates available to you on Microsoft Windows Update:
    http://update.microsoft.com
    Once you have the latest Service Pack for Windows installed, download and install iTunes for Windows (which includes QuickTime):
    http://www.apple.com/itunes/download
    If you continue to experience difficulty with this issue, you may wish to contact Apple technical support. A representative will be able to tell you about Apple's complimentary and fee-based support options and can help you determine which option might be most helpful.
    Please find the appropriate phone number here:
    http://www.apple.com/support/contact/phone_contacts.html
    Thank you for contacting iTunes Store Support. Have a nice day!
    Sincerely,"
    AND IT WORKED happy customer.

  • I just installed the latest update on my iPhone 4 and now it's nothing but a white screen and my computer wont even connect it to my itunes when I plug it in the USB port. What happened?

       I installed the latest update to my phone. Half way through it asked to connect to itunes. After updateing it had some type of error and wanted me to restore the phone. After restoring, another error box popped up and said that it could not be restored. Now it won't connect to itunes or my computer at all and is nothing but the black start up screen with the apple logo, or it's just a white screen. What happened?

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • Nothing but a white screen

    The mac was just sitting there idle and all of the sudden it went white. After a few restarts it's still white. No startup logo shows or anything, but it does fully boot. I can access it through logmein or through the local newtwork and all is fine. Accessing it through logmein I was able to switch startup disks and reboot...still white. Booting from the OS DVD and it's still white.
    Maybe something went wrong with the graphics card?
    Is there anything I can try before sending it in for repair?
    Thank you.

    One thing to try is running the Apple Hardware Test. It's on the "Applications Install" DVD that came with your computer. To run AHT, insert the DVD into the computer, restart, and hold down the "D" key during startup.
    Also see: http://support.apple.com/kb/TS1411?viewlocale=en_US
    Taken from that page:
    You see a blank, gray screen
    1. Make sure the latest firmware for your computer is installed. Check Apple Downloads for the latest versions.
    2. Disconnect all peripheral devices, except for the Apple keyboard and mouse. This includes ADB, serial, USB, FireWire, SCSI, and PCMCIA devices. If this resolves the issue, connect one device at a time, restarting after each one, until you've determined which device is causing the issue.
    3. Remove third-party hardware upgrades such as memory (RAM), microprocessor upgrade cards, and PCI cards. If this resolves the issue, add back one item at a time, restarting after each one, to isolate the issue. Note: Apple does not provide technical support for Mac OS X when used with third-party microprocessor upgrade cards.
    4. Start up from your Mac OS X installation disc and check the hard disk with Disk Utility or, if necessary, fsck.
    5. If you are comfortable doing so, reset your computer's Power Management Unit. Specific directions are available elsewhere in the Knowledge Base.
    6. Additional tips may be available in this document.
    Message was edited by: inandoutofgrace

  • How do i fix a blank screen ? I power on but i get nothing but a white screen

    I turn on my phone but i get a blank screen how do i fix this????????

        Hi D.o,
    Let's get that issue resolved for you. If you have a phone with a removable battery, please remove the battery and leave it out for a few minutes. Then re-insert the battery and power on the device. If this did not resolve your issue, we do need to gather some more information to further assist you. What type of phone do you have? Does your phone have any physical damage?
    Please let us know if you need further asistance. Thanks.
    NidiaA_VZW
    Please follow us on Twitter @vzwsupport

  • Yesterday suddenly the search function of the App store stopped working.  I can search for an App, select one from the suggestions then i get nothing but a white screen.

    Anyone else have this issue?  How did you resolve?

    Anyone else have this issue?  How did you resolve?

  • IPhone has nothing but a white screen won't do anything

    just bought the phone hope i didnt waste my money.. what can i do

    Suggest a normal restart and if that doesn't work, try a reset.
    Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

  • Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

    Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?

    File icon with ? mark on it means it can't read from the hard drive. The hard drive is now wiped or bad. If just wiped then you will need to reinstall your operating system, OS X. If bad you will need to replace the drive.
    Start with booting the computer from the OS X install DVD that came with your system. If the Mac came with Lion Pre-Installed then you use the Lion internet recovery system to reinstall (Hold down Command+r keys or Command+Option+r keys to boot the computer from over the internet to the Lion recovery HD system).
    Good Luck.

  • HT2538 I get nothing but a grey screen at startup

    When I turn on my 2008 iMac, I get nothing but a grey screen . . . put in the rescue disk (and held down the "C") and got the Apple logo and the little spinning think, but then to black screen?  What to do?  What is causing this?

    Hello,
    Have you blown the dust out lately?
    If you boot up holding Option or alt key, how long will it set on that screen without going black?

  • TS3274 My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response.  Any ideas as to what may be wrong and what I can do?

    My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response.  Any ideas as to what may be wrong and what I can do?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPad fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT201412 I phone won't power on.   I have nothing but a black screen

    I phone won't turn on.   I have nothing but a blank screen.   Has been charging for over an hour.  

    do a reset, hold down the home/sleeep button together until you see the apple log oand then release, then wait for hte phone to boot back up

  • T61 shows nothing but a black screen...

    I'm working on a Lenovo T61 notebook, and shows nothing but a black screen with a cursor no POST no nothing. What could the solution to that? Please help it's agent...

    take the out hdd first, and see what happens. Also you may want to take the ram out and then restart. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • E60 working fine but shows white screen

    After I made master reset it's booting fine and working and I can receive calls, but it shows only white screen. Yesterday I updated firmware, but still white screen. What can I do? Please help!

    If the screen is white (blank) and the phone seems to work in any other way - it sounds like it's a hardwarefault with the screen in some way. Take it to a Nokia care point.

Maybe you are looking for

  • Receiver determination wildcard in condition editor

    Hi experts, I have a question regarding the condition editor for receiver determinations on PI 7.1. I have an xpath expression on the left side and I need to have a condition on the right side that includes a certain pattern. One example: p1:myDocume

  • Flash in DW Template

    Hi, When I insert a flash file into my template, it comes up as a blank file after publishing. Is this a bug with CS3? Jane

  • Upgrade windows - mac

    I have a Windows PS 5.5 extended version. Now I've got a MacBook an would like to do an Upgrade to the Mac PS 6 extended version. Is this possible? How? Thanks!

  • Inconsistent datatypes

    Hi! This is the beginning of my program declare porcent number(4,2); fec date; period number; bloquePLSQL varchar2(32767); begin select ten_porcent, ten_fec, ten_period into porcent, fec, period from ta_tx_entidad where ten_codigo='PF'; bloquePLSQL :

  • Grant Application Impersonation Rights for UPN on Exchange Server 2007

    Hi, I would like to know , how to grant application impersonation rights for UPN account in exchange server 2007 . As i am working for mailbox migration , i should have this rights . I can do impersonation rights for domain\username but not for [emai