L505-S5982 freeze-up
Recent purchase; Toshiba CS suggested HDD reinstated to factory default. Done. Computer still freezes to were I have to pull the power plug and battery. This happens daily. No hardware or software installed other than what came from the factory on this laptop.
There would be no way for anyone to answere that without more info.
Try this:
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
(no media or data will be deleted from the device, this will only take a minute).
Similar Messages
-
Trying to reinstall win 7 on a friends toshiba L505-s5983 and it is giving me pure unadulterated ..... I get the windows logo and then a black screen then finally a set up screen asking for country info user name etc. it is extremely slow and then it loops back to the beginning again... sometimes. Been at this for a couple of weeks off and on with no success. At some point I have gotten the toshiba configuration screen but that's it. Occasionally I can get it to boot in safe mode. The install is from a Best Buy recovery disc and they want an additional 190 buck to fix it. Whatever IT is ??!! Help.
Are you aware that there is a recovery partition on the hard drive that will return the machine to its out-of-box configuration? See the Recovery section of the User's Guide for complete instructions to perform the recovery. The User's Guide is at Start/All Programs/My Toshiba/User's Guide.
Toshiba download site doesn't show a L505-S5983 but there is a S5982 and S5984! Strange. In any event if you will go to that site (URL below) for L505-S5982, you can see all sorts of info that is probably mostly applicable to that model also, including the User's Guide in case you are unable to get it on his machine.
Incidentally, he should have made recovery disks also as extra insurance when he first bought the machine. I'm assuming he did not; hence, your use of Best Buy disks. If, in the end, none of this works, the recovery disks you use should be the ones made by Toshiba and available for sale for a nominal shipping and handling charge. Since Best Buy disks aren't working, I would ask them for my money back.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit -
Strange CPU freezing (L505-S5997 model)
Hello! I've had this laptop since last Christmas and it has been been doing well before, even with Windows 7. However, today, my desktop screen and toolbar keep randomly locking up (both do so seperately and randomly,) with my mouse and keyboard stick active. So I tried Ctrl+Alt+Delete and found that Task Manager doesn't help. Oddly enough, selecting "Switch Users" and selecting my name makes the CPU run normally...for a few seconds, then it locks up once more.
...But the bizzare freezing doesn't end there. For whatever reason, I can still use a few programs, such as FireFox, even when the Desktop and Task Manager is frozen. Anyway, I'm wondering if anyone can help with this issue.
Thank you!Satellite L505-S5997
What do you mean by "locking up"? Does the CPU usage go to 100% on Task Manager's Performance tab?
Does this occur often enough so that we can make experiments?
-Jerry -
Re: Satellite L505-10M - Random BSOD, power cuts, freezes
Hello,
I have problems with my notebook. Problems go from the laptop just shutting down, as if someone pulled the powercord if it was a desktop.
At that time the battery was fully charged and i was working with the power cable connected. Other problems are freezes, requiring to shutdown the pc by holding the power button. And last problem are BSOD.
The error messages aren't always the same, so far i've had "memory management error", "system service exception" 0x3B, "IRQL_no less or equal'.
The laptop just came back from repair with a SMART failure on the HD and i was hoping the problems would be solved with that but they still remain, making me think the HD failure isn't the cause but an effect of the yet to be identified problem. So far I have tested the RAM with memtest86 which didn't find anything, running diagnostic programs and burnin programs do not force the pc into errors, the symptoms are very random.
The link below has several minidump files from the past few days, after the pc came back from the HD replacement.
http://users.telenet.be/idero/fleetdefender/minidumps.zip
Hopefully someone can figure out what the underlying problem is or confirm my suspicions that this probably is a motherboard issue.Hi
I have exactly same problem with my brand new Toshiba, I got several BSODs per day. I have tested memory and it is fine. The dump says following:
BUGCHECK_STR: 0x7f_8
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff80003889b69 to fffff8000388a600
STACK_TEXT:
fffff800`04dfed28 fffff800`03889b69 : 00000000`0000007f 00000000`00000008 00000000`80050033 00000000`000006f8 : nt!KeBugCheckEx
fffff800`04dfed30 fffff800`03888032 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`04dfee70 fffff800`03852e60 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
fffff880`08296fe0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!SeAccessCheckFromState+0x60
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiDoubleFaultAbort+b2
fffff800`03888032 90 nop
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiDoubleFaultAbort+b2
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4b88cfeb
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
I have the newest drivers possible.
Any ideas what should I do?
Funny thing was that I bought the machine because of the money back promise (if the laptop fails, you will get your money back and laptop fixed) - and it still does not seems to work!
BR,
Ville -
L505 freeze at "recovery of factory default software"
I am trying to reset my L505 to factory default settings. The first part went fine. After the first restart it has froze at
"<recovery of factory default software>
preparing
Initializing the partition. Please wait..."
It has been on this screen for going on 40 minutes now with zero change. I am not tech savvy. Is it safe to turn off and see what happens? Is there something else I should try?
Thanks in advance!Looks like you and I are in the same boat without a paddle. Just different laptop.
Jerry will be along shortly to help. -
Wlan rtl8191se causes freeze on arch64
Hello,
i've got a new Toshiba L505-10j with realtek rtl8192se wlanadapter. There is no Linux-support for this one, so I had to install them by myself... I found drivers from realtek in a forum. They where on the official site only for a couple of days. I installed them with "make install". The interface was found after a reboot. After using Wlan-Connection a few seconds my system freezes. I tried networkmanager and wicd with the same effect.
I tried the same with GNU/Linux Mint(also x86_64) and I coud use my network without problems, so it should be a problem of arch/arch64.
I've also tried ndiswrapper, but it only works with 32bit.
uname -a
Linux cyberwinnie 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64 Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz GenuineIntel GNU/Linux
/var/log/kernel.log
ov 24 17:11:04 cyberwinnie kernel: pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 24 17:11:07 cyberwinnie kernel: r8169: eth0: link down
Nov 24 17:11:07 cyberwinnie kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 24 17:11:07 cyberwinnie kernel: gen_RefreshLedState first init
Nov 24 17:11:07 cyberwinnie kernel: =================> NIC version : C-cut
Nov 24 17:11:07 cyberwinnie kernel: rtl819xSE 0000:14:00.0: firmware: requesting RTL8192SE/rtl8192sfw.bin
Nov 24 17:11:07 cyberwinnie kernel: ===>rtl8192_SetWirelessMode(), wireless_mode:0x8, support_mode:0x16
Nov 24 17:11:07 cyberwinnie kernel: <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Nov 24 17:11:07 cyberwinnie kernel: ===>ieee80211_start_scan_rsl()
Nov 24 17:11:07 cyberwinnie kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Nov 24 17:11:09 cyberwinnie kernel: ====================>haha:IPSEnter()
Nov 24 17:11:09 cyberwinnie kernel: =========>NicIFDisableNIC()
Nov 24 17:11:09 cyberwinnie kernel: PHY_SetRtl8192seRfHalt save BB/RF
Nov 24 17:11:10 cyberwinnie kernel: r8169: eth0: link up
Nov 24 17:11:10 cyberwinnie kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 24 17:11:13 cyberwinnie kernel: =========>r8192_wx_set_scan(): IPSLeave
Nov 24 17:11:13 cyberwinnie kernel: ===========>NicIFEnableNIC()
Nov 24 17:11:13 cyberwinnie kernel: gen_RefreshLedState first init
Nov 24 17:11:13 cyberwinnie kernel: =================> NIC version : C-cut
Nov 24 17:11:13 cyberwinnie kernel: ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
Nov 24 17:11:13 cyberwinnie kernel: <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Nov 24 17:11:17 cyberwinnie kernel: ====================>haha:IPSEnter()
Nov 24 17:11:17 cyberwinnie kernel: =========>NicIFDisableNIC()
Nov 24 17:11:17 cyberwinnie kernel: PHY_SetRtl8192seRfHalt save BB/RF
Nov 24 17:11:21 cyberwinnie kernel: eth0: no IPv6 routers present
Nov 24 17:11:22 cyberwinnie kernel: fuse init (API version 7.12)
Nov 24 17:11:26 cyberwinnie kernel: =========>r8192_wx_set_scan(): IPSLeave
Nov 24 17:11:26 cyberwinnie kernel: ===========>NicIFEnableNIC()
Nov 24 17:11:26 cyberwinnie kernel: gen_RefreshLedState first init
Nov 24 17:11:26 cyberwinnie kernel: =================> NIC version : C-cut
Nov 24 17:11:27 cyberwinnie kernel: ===>rtl8192_SetWirelessMode(), wireless_mode:0x10, support_mode:0x16
Nov 24 17:11:27 cyberwinnie kernel: <===rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
Nov 24 17:11:28 cyberwinnie kernel: Linking with Canvas,channel:7, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
Nov 24 17:11:28 cyberwinnie kernel: ===>ieee80211_associate_procedure_wq(), chan:7
Nov 24 17:11:28 cyberwinnie kernel: ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
Nov 24 17:11:28 cyberwinnie kernel: =================>ieee80211_authentication_req():auth->algorithm is 0
Nov 24 17:11:28 cyberwinnie kernel: Linking with Canvas,channel:7, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
Nov 24 17:11:28 cyberwinnie kernel: ===>ieee80211_associate_procedure_wq(), chan:7
Nov 24 17:11:28 cyberwinnie kernel: ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
Nov 24 17:11:28 cyberwinnie kernel: =================>ieee80211_authentication_req():auth->algorithm is 0
Nov 24 17:11:28 cyberwinnie kernel: ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
Nov 24 17:11:28 cyberwinnie kernel: <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
Nov 24 17:11:28 cyberwinnie kernel: #################ieee80211_sta_send_associnfo(), assocreq_ies_len:57,assocresp_ies_len:42
Nov 24 17:11:28 cyberwinnie kernel: ===>u4bAcParam:a425, ===>u4bAcParam:a449, ===>u4bAcParam:5e431c, ===>u4bAcParam:2f321c,
Nov 24 17:11:28 cyberwinnie kernel: Associated successfully
Nov 24 17:11:28 cyberwinnie kernel: ============>normal associate
Nov 24 17:11:28 cyberwinnie kernel: Using G rates:108
Nov 24 17:11:28 cyberwinnie kernel: Successfully associated, ht not enabled(0, 0)
Nov 24 17:11:28 cyberwinnie kernel: ===========rtl8192se_update_ratr_table: ff5
Nov 24 17:11:28 cyberwinnie kernel: ===>set to B/G mode
Nov 24 17:11:28 cyberwinnie kernel: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Nov 24 17:11:28 cyberwinnie kernel: EAPOL TranslateHeader(), pTcb->DataRate = 0x2
Nov 24 17:11:28 cyberwinnie kernel: EAPOL TranslateHeader(), pTcb->DataRate = 0x2
Nov 24 17:11:28 cyberwinnie kernel: alg name:TKIP
Nov 24 17:11:28 cyberwinnie kernel: rtl819xSE:EnableHWSecurityConfig8192:, hwsec:1, pairwise_key:2, SECR_value:c
Nov 24 17:11:28 cyberwinnie kernel:
Nov 24 17:11:28 cyberwinnie kernel: rtl819xSE:====>to setKey(), dev:ffff88013c090000, EntryNo:4, KeyIndex:0, KeyType:2, MacAddr00:04:0e:db:8b:da
Nov 24 17:11:28 cyberwinnie kernel:
Nov 24 17:11:28 cyberwinnie kernel: rtl819xSE:=========>after set key, usconfig:8008
Nov 24 17:11:28 cyberwinnie kernel:
Nov 24 17:11:29 cyberwinnie kernel: ========>dm_check_edca_turbo():iot peer is unknown, bssid:00:04:0e:db:8b:da
Nov 24 17:11:30 cyberwinnie kernel: alg name:TKIP
Nov 24 17:11:30 cyberwinnie kernel: rtl819xSE:====>to setKey(), dev:ffff88013c090000, EntryNo:2, KeyIndex:2, KeyType:2, MacAddrff:ff:ff:ff:ff:ff
Nov 24 17:11:30 cyberwinnie kernel:
Nov 24 17:11:30 cyberwinnie kernel: rtl819xSE:=========>after set key, usconfig:800a
Nov 24 17:11:30 cyberwinnie kernel:
Nov 24 17:11:30 cyberwinnie kernel: EAPOL TranslateHeader(), pTcb->DataRate = 0x2
Nov 24 17:11:30 cyberwinnie kernel: ===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
Nov 24 17:11:39 cyberwinnie kernel: wlan0: no IPv6 routers present
Nov 24 17:11:48 cyberwinnie kernel: rtl819xSE:==========>rtl8192_down()
Nov 24 17:11:48 cyberwinnie kernel:
Nov 24 17:11:48 cyberwinnie kernel: ################>notify_wx_assoc_event_rsl(): Tell user space disconnected
Nov 24 17:11:48 cyberwinnie kernel: Save max pwr
Nov 24 17:11:48 cyberwinnie kernel: rtl819xSE:<==========rtl8192_down()
Nov 24 17:11:48 cyberwinnie kernel:
Nov 24 17:11:48 cyberwinnie kernel: ============>r8192_wx_set_essid():driver is not up return
Nov 24 17:15:17 cyberwinnie kernel: usb 2-2.4: new high speed USB device using ehci_hcd and address 5
Nov 24 17:15:17 cyberwinnie kernel: usb 2-2.4: configuration #1 chosen from 1 choice
Nov 24 17:15:17 cyberwinnie kernel: Initializing USB Mass Storage driver...
Nov 24 17:15:17 cyberwinnie kernel: scsi6 : SCSI emulation for USB Mass Storage devices
Nov 24 17:15:17 cyberwinnie kernel: usb-storage: device found at 5
Nov 24 17:15:17 cyberwinnie kernel: usb-storage: waiting for device to settle before scanning
Nov 24 17:15:17 cyberwinnie kernel: usbcore: registered new interface driver usb-storage
Nov 24 17:15:17 cyberwinnie kernel: USB Mass Storage support registered.
Nov 24 17:15:22 cyberwinnie kernel: scsi 6:0:0:0: Direct-Access TOSHIBA USB 3.5"-HDD 100 PQ: 0 ANSI: 2
Nov 24 17:15:22 cyberwinnie kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 24 17:15:22 cyberwinnie kernel: usb-storage: device scan complete
Nov 24 17:15:22 cyberwinnie kernel: sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Nov 24 17:15:22 cyberwinnie kernel: sd 6:0:0:0: [sdb] Write Protect is off
Nov 24 17:15:22 cyberwinnie kernel: sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00
Nov 24 17:15:22 cyberwinnie kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 24 17:15:22 cyberwinnie kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 24 17:15:22 cyberwinnie kernel: sdb: sdb1
Nov 24 17:15:22 cyberwinnie kernel: sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 24 17:15:22 cyberwinnie kernel: sd 6:0:0:0: [sdb] Attached SCSI disk
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="de_DE.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="de-latin1"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="cyberwinnie"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network netfs crond alsa hal fam networkmanager gdm)I'm sorry, it works at all 32bit distros. It's just the 64x thing..., which doesn't work.
-
Satellite L505-10J - Can't play longer than 30-60 min
Hi,
I just bought the Toshiba L505-10J last week and I'm really satisfied with my choice, but when I start a game like Counter Strike Source or Risen I Have some strange Issues. The first 30-60 Minutes are Ok but then the Sound starts cracking and my Mouse (Razer Lachesis) stops moving when I'm holding a Key on the Keyboard (for example W for moving forward). When I switch to my desktop while playing this problem is gone (I opened Notepad pressed down W and moved the Mouse. No problems at all). When I Switch back it's there again. The only solution to this problem ist to reboot my Computer. Then I can play the next 30-60 min. before it starts all over.
I already reinstalled Windows 7 but the problem is still there.
When i use my Touchpad instead of my mouse it's the same. Can't play longer than 30-60 min...
This is not acceptable because I want to play games on my Notebook from time to time.
Hope someone can help me and sorry for my bad english, I'm from germany.Hi Willey,
Im not quite sure but maybe your notebook is overheating. Have you clean the notebook using compressed air spray or can you notice if the notebook is really hot during you play a game?
Furthermore it would be interesting to know what display driver you are using. I had a similar issue after I installed a non Toshiba display. The graphic card was overheating and so the computer freezes. After this I installed the latest version from the Toshiba website and everything was fine again.
Check this!!! -
Tried searching for a bit, but I didn't see anything in this forum that helped. If I missed something, I apologize--please point me in the right direction!
Got out the old beige G3 to play around with the other day. I decided I wanted to attempt to install OSX on it since I've got a zif 1Ghz upgrade sitting around and some extra hard drives.
My tale begins with a fairly stock G3. The original (I'm guessing) 6GB hard drive is an Apple OEM drive, but it has passed on. It had OS 9 on it and was running fine. Since the drive died, I decided to start with a new hard drive and 8.6 since the tower (by the way, it's a Rev. A) came with 8, right? I figured, perhaps wrongly, that the best path to OSX would be by running all the proper updates through OS 9. Sounds like 10.2 is fairly stable for the G3 tower without lots of tweaking, so that's what I was shooting for.
Well, here's what I did to prepare the drive and computer:
Pull extra RAM
Pull personality card (only card installed)
Replace PRAM battery
Set drive and CD-ROM to master
Boot to open firmware (set-defaults, reset-all)
Reset with p-r-opt-cmd dance
Then I booted to the 8.6 install disk. I ran disk setup and initialized the 80GB ATA drive (WD Caviar) with two partitions (7GB and 73GB roughly) since I was planning on working my way up to OSX and have read about the 8GB partition limitation. Just in case I installed the drivers for the disk with drive setup after I initialized it.
Restart, boot to 8.6 install disk. Run the installer, selecting the ~7GB partition. It freezes with four minutes left. That's not good!
I had three RAM modules, so I started from scratch and ran the whole procedure from top to bottom with each module. Same thing.
Tried the OS 9 install disk. At this point, I was a little frustrated. Maybe my install disk was messed up. Nope. OS 9 install freezes with seven minutes left every time.
Is it possible that all three RAM modules are corrupt? This computer has been sitting for quite some time. The PRAM battery was toast, hence the replacement. Oh, and by the way, the only things hooked up are the CD-ROM and hard drive. No ZIP or floppy attached during the installation attempts.
Am I missing something super obvious?
Thanks for taking the time to read this poor tale. I look forward to being enlightened.
bJon - My goal now is to get this machine back to where it was in the not so distant past. I'd prefer not to start pouring money into it if I'm not sure that it will work. I'll keep that in mind if I do find a solution to my problem, or if I can fairly definitively narrow my problem down to the motherboard.
BDAqua - Thanks. I knew the reset-nvram didn't work on this firmware, and I--probably mistakenly--assumed that doing the p-r-opt-cmd dance took care of that reset. I'll try that in about an hour.
While I'm sitting around, I decided to test one more variable--the CD-ROM drive. Booted to the OS9 disk and initialized my 80GB disk. Then I used Disk Copy to copy the CD to a later partition. I'll install 8.6 until it freezes. Believe it or not, it'll show the flashing disk with question mark, and eventually boot 8.6. This is not so with OS9. If I let that install until it freezes, it won't boot at all. So I'll try to boot up 8.6 with another hard drive attached, and attempt to run the OS9 installer to install on the other hard drive. At this point I'm grasping at straws. I'm not even sure the installer will run if it's not on a CD.
So I'll try the reset after this (probably fails).
thanks!
b -
MSI VN220GT MD1G|GeForce 220 GT - causing lock ups/screen freezes
Hi, I've been searching everywhere for my problem, and the things I find usually are left unanswered :(
I recently upgraded my old graphics card (GeForce 7300 GT) to the GeForce 220 GT, at that time I was using Windows XP SP3. Everything went fine then, I downloaded the newest driver from nVidia (195.62) and restarted, everything went smoothly.
It was then my computer started to freeze, to the point where I can't do anything (mouse/keyboard unresponsive). I am forced to force reboot. This freezing usually happens randomly when there's nothing to provoke the problem.
So I decided to upgrade to the new Windows 7. I did everything it told me to and everything went very well. But the problem still occurs, but more often, and around 30 minutes after logging in. I got the Windows 7 32 bit version of the new nVidia driver (195.62) and installed it. Did nothing. I have also tried to update windows which also did nothing.
These forum threads ask the same question I am now asking:
http://forums.nvidia.com/index.php?showtopic=109833
http://vip.asus.com/forum/view.aspx?SLanguage=en-us&id=20091113065624625&board_id=14&model=CG5270&page=2&count=17
I am currently posting this in safe mode, very frustrated too. Help would be greatly appreciated, I have no where else to find answers :SQuote from: ZSDE on 14-January-10, 23:31:55
I did some more research on the net and it seems this PSU is labelled under many different names. I found a Portuguese site that did the test for this unit and then used the google translator tool.
refer to http://www.clubedohardware.com.br/artigos/1818/1
Some translated extracts:
The Coletek is a national brand aimed at the OEM market, or its source is aimed at companies that assemble PCs They have a separate brand for products geared to the retail market, the C3Tech. Today we test the model LC-8460BTX S (which, despite its name, is an ATX and not a BTX) that is sold as a source of 450 W. Really?.....
....Speaking of curiosity, in Figure 7 you can see the marking of the type of fuse in the circuit board of the source. All sources bring this information. But the curious thing here is that the marking indicates that for a source from 150 to 200 W a 5 A fuse should be used and to a source from 230 to 300 W from a 6.3 A fuse should be used. As this power supply uses a fuse of 6.3 A, we have a source between 230 and 300 W, according to their own existing markup on the printed circuit board thereof. As the manufacturer can turn that into 450 W on the label of the source is a magic that Mr. M can not explain.....
....The Coletek LC-S 8460BTX burned when trying to draw about 225 W (which would be our test number seven). So the most you can pull it was about 190 W (which would be our test of 200 W). More information and video on the next page.
So I recommend that you perhaps translate the whole article to get the full results. In your case, I believe the PSU should be the first place where you should try something a bit more realistic before you do anything else.
Quote from: Henry on 15-January-10, 08:09:28
For a system with a 220 installed PSU with +12V~30A minimum is recommended. My recommendation is to get nothing less than a quality PSU such as a Corsair VX450W +12V~33A. That junk PSU is typical of the worthless ones that are often provided by case manufacturers and examples of similar units that can be purchased for as little as $10 (USD) on eBay.
Thank-you so much guys, you've most likely have just diagnosed and gave me a solution for my problem
At first I never knew all PSU's were different, and that my new graphics card could handle whatever I had in my system at the moment.
I don't think I will bother checking my PSU if my current PSU is a Okia or a Xion, I may as well upgrade the thing anyway
Just some things I need cleared up though:
Firstly, is it the Corsair VX450W that I would want to buy and install to run my card? Is it affordable?
And secondly, are PSU's hard to install/upgrade? Where can I find a guide/tutorial for this kind of thing? -
Lock-ups/freezes - Nvidia GeForce 8600M GT
Hi all, I have been the owner of a MacBook Pro since August or so. My problem is that when working with my MacBook Pro, occasionally the display freezes up. Sometimes it recovers, sometimes the machine refuse to recover. If I listen to iTunes, I hear the music playing on in the background, which indicates that this is an issue with the graphics chip, and not the computer in general.
I have searched the Internet, and it seems I am not the only one who has issues with the Nvidia GeForce 8600M GT. According to slashdot.org, Apple acknowledges that this may be an issue (http://apple.slashdot.org/apple/08/10/11/1518246.shtml).
Have anyone else experienced these kinds of issues, and if you did, how did you solve them?Hello! I am feeling a little more secure now that there have been quite a few posts about the poor preformance of the nVidia cards in the SR Macbook Pros, its comforting to know this isn't an isolated issue. I've gone as far as contacting Apple to let them know of the poor preformance. They've were, as usual, very nice and as helpful as they are allowed to be. Currently, I have a replacment on the way apparently, my original was deemd DOA I believe. However, it seems at the time all we can do is report our issues to Apple. My main concern is the legnth of time these machines have been out, and the amount of units sold to unknowing customers who are being sold on what Apple is marketing as a strong feature of the machines: the graphics card. When in reality, the card is extraordinary, the preformance in OSX is extremely poor. It is up to us as consumers to let Apple know how aggrivated we are.
Please, take the time and send your responses and feelings to Apple. You can do that here:
http://www.apple.com/feedback/macbookpro.html -
Lock-Ups and Freezes PLEASE HELP
Hello everyone..
I come here to see if anyone can help me... Ive done it all and nothing is working.
I just recently started having problems with my computer, im not sure why this happend but ill try to explain everything as best as I can.
The problem started a few days ago while I was playing SWG's. I was playing and all of a sudden my machine froze, the screen locked-up and then after about 2 min the entire system restarted. I then logged back into my windows and after a while a system froze and restarted yet again. I though it was a SWGs issue but then the computer would freeze while browsing the net and doing other tasks.
I have formated my machine, re-installed my drivers, and re-installed the hardward. Nothing has worked.
My computer specs are
300watt PSU Enermax True Power
MSI K7n2 nforce2 8xagp mobo
athon 1700xp
512mb of Kingmax DDR 2700
SB audigy x-gamer sound card
MSI geforce4 ti 4200 8xAGP graphics card
Hope thats enough..
One last thing... When my computer restarts after the problem i get a message asking me to report the problem to microsoft... i located the error file and this is what was writen in it....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-07-19 01:30:24
TimeZone: 300 - Eastern Standard Time
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 5
Shutdown: 0
EventCount: 5
BreakCount: 5
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: nv4_disp
EventFlag: 1
DeviceClass: Display
DeviceDescription: MSI MS-StarForce GeForce4 Ti 4200 with 8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
HardwareID: PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
Manufacturer: NVIDIA
DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C1C 0006000D 000A0C1C 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: NVIDIA Corporation
DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverFileVersion: 6.13.10.3100
DriverInternalName: nv_disp.dll
DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
DriverOriginalFilename: nv_disp.dll
DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 31.00
DriverProductVersion: 6.13.10.3100
Hope this helps, i dont understand what it means so maybe one of you might...
Please help me on this... Ive tried everything i can...
Thanks in advanceIf what you are saying, and I am reading correctly:
The machine and game was working just peachy and all of a sudden the problem manifested itself?
Did you do ANYTHING to change your system prior to this happening to possibly have an effect?
the fast that you said you have re-loaded the OS and removed and re-installed the hardware with the same result tells me that there may be some sort of hardware failure and this could get difficult to troubleshoot.
First things first, try a memory testing software like memtest86 to see if you get any errors.
http://www.memtest86.com/ -
Pavilion Elite e9180f freezes, crashes, BSOD
I am one of the many unhappy customers who bought this piece of junk (Pavilion Elite e9180f) and waited too long to return it because in my naivete, I thought it was some kind of simple software issue. Nope! It's definitely something wrong with the hardware, because the freezes and crashes have been happening since day 1, right when I took the thing out of the box.
Yeah, the system is fast and runs Windows Vista great, when it's actually WORKING, which is usually only guaranteed for about the first 5 minutes after you power the system on and boot windows. After that, it's just buying time before it crashes again. Forget trying to get anything done on this computer. Forget about asking this PC to play a video or music file without the files "stuttering" during playback. Even my 7 year old Sony Vaio which is running XP can handle playing an MP3 file without stuttering and crashing!
Like everyone else, the freezes and crashes happen either one of two ways:
1) The machine begins to "stutter", stutter more, then freeze/crash. When I say stutter, I mean I move the mouse, the pointer graphic will hesitate on the screen and lag behind. If you start to play a video or music file, this manifests in an audible "stutter". The stuttering gets worse and worse as minutes pass until eventually it freezes for good, blasting that 1/50th second moment of audio into infinity. You have to reboot immediately if you don't want to go deaf or be driven mad.
2) I will be doing nothing at the time (example, I close all programs out and leave Windows sitting on the main desktop screen), I'll walk out of the room for a minute, then come back and find I can't move the mouse. This system will often lock-up without any warning!
Sometimes I'll get a BSOD or error screen, sometimes I won't (in which case your only option is to do a cold re-boot.) When I do get the BSOD, the error is ALWAYS the "did not get a response from the secondary processor" yada yada. I wish HP would just admit they shipped this model out with a bad processor/motherboard/whatever and do an official recall. I have owned PCs for the last 13 years and this is the worst and most consistently disappointing experience I have ever had.
What is the hardware issue? Which part is the lemon part? The motherboard? The processor? The BSODs seem to indicate a bad processor. I do have the Pegatron Truckee version 1.03 motherboard. Is that the problem?
P.S. I have contacted HP on many occasions about this, literally stayed on the phone for hours with "customer support" (according to one HP rep, 80% of their customer service reps are based outside of the United States...good luck getting any "technical" help from them) to no avail. I did talk to one nice tech support guy in Canada who said "it sounds like your unit has a bad processor", so he had HP send me a box to ship my unit to their repair center so they can replace the processor. However, I have also had HP reps tell me it could be anything from the memory to the hard drive. Multiple HP reps claimed to me that they have "received no complaints" about this system. One guy told me he "thought he got an email last week" regarding "something" about the system, but couldn't remember what it was and he put me on hold while he searched for the email. He never found it. What a joke.
EDIT: Just to clarify, the crashing issue has been happening since day one, but initially I thought it was an issue with Vista. I had never owned or used Vista before, so I thought maybe Vista was just unstable. Nope. I know several people who own Vista and have never experienced these issues. I have downloaded every update from Microsoft/Windows Update. I have upgraded to Vista SP2 with all the latest drivers and software for all of my hardware. No luck. It is definitely a hardware issue. Thank god HP's warranty is good for 1 year (I bought my Elite in July).
Message Edited by Doonyman on 09-24-2009 02:58 AMUnfortunately I have to add my disastrous encounter with HP's E9180F a true lemon HP is selling. I must take some responsibility for not carefully researching this model before I purchased, but I trusted the HP name and got stung- big time.
The scoundrel :
HP and its Pavilion Elite e9180f
Windows 7 64bit
motherboard - Pegatron Truckee ver 1.03
BIOS ver 5.22Intel Core i7 920 @ 2.67GHz
Memory 9206 MB Ram
As so many others have reported my HP E9180f started locking up and going to BSOD right out of the box. My first freeze-up came when I was doing the Windows update process. At first I didn't think much about it but I started getting random freezes a couple time a day. At that point I went online to see if others had experienced the same problem and perhaps had a fix. What I found was very troubling; I found extensive documentation describing my exact problems and what was really horrifying was the reports of how ridiculous HP's help services were treating people with the problem. At first I didn't totally believe what I was reading on HP's own customer forum; I do now.
· I've went through the total recovery process three times now, HP techs have spent hours remotely running my computer, (yes it did lock up on them to)
· I had to upgraded the BIOS. (HP tech tried, said he had, but he hadn't)
· I was directed to clear the BIOS (luckily for me I had the tools
· Updated all drivers again and again.
· Next I was asked to remove the video card, memory, and motherboard power cable and reseat them. I declined because I didn't want to give HP any reason to void my HP 2 year House Call Care Pack which covers this unit. When I invited HP to send a service tech out to perform these tasks, they said that house call only covers part replacement, we weren't replacing a part. I couldn't believe what I was told. Are you feeling my frustration?
Keep in mind that each time HP requests that I make changes, they then ask me to test the system, which I did and each time with the same result, BSOD
I'm heading into my fifth week of working with HP to fix this problem. and I still haven't even been able to get my case moved up to a senior case manager, what a joke HP's help process is.
One conversation I loved was;
HP tech: "I'll have a senior case manager call you within 24 hours."
Skeptical me: "What should I do if I don't get a call?"
Silence, no response.
Me again: "What should I do if I don't get a call?"
HP tech: "That's an impossibility."
Guess what? The impossibility became reality (I bet you guessed) .
HP's last stall tactic was to have me fax them my proof of purchase and invoice and call back in 24 hours. Where have I heard that before? Apparently nothing can go forward until they receive it. So I faxed them the stuff within 10 minutes, and when I called back 24 hours later, guess what, you're right it wasn't on their system yet. I asked couldn't I be escalated to a senior case manager (it's apparent that only a senior case manager can do anything). "No," was the tech's reply, "call back again later".
Please if anyone out there knows the secrete to getting a senior case manager, or an HP tech support number here in the U.S. so I can get this thing fixed I'd love to know it.
Fast becoming HP never again. -
Mid 2009 13.3" Macbook Pro random freezing issue
Hi all,
I had a 2009 13.3" Unibody Macbook and last week purchased a 13.3" Macbook Pro. I had installed 4GB of RAM in the MB myself, and it had worked fine for the month I owned it.
I backed up my MB with an external USB hard drive using Time machine, restored from this backup on my MBP and moved the 4GB RAM over.
When using the MBP I get random freezes lasting between 1 and 3 seconds, occuring every 5 to 30 minutes.
Could someone please advise a good way to diagnose this problem further? I am guessing it is not the RAM as it worked fine whilst in the MB.I have an update!
I made an appointment with a local Apple Genius Bar and talked to a technian. He said it was neither the RAM nor the Hard Drive at fault.
His only thoughts were that a software issue was the root cause. I have been doing some serious investigating this morning and figured it out. Viewing system.log in Console shows:
SMS::infiniteIntTimerEventHandler ERROR: we have infinite interrupts, disabling
At exactly 5 minute intervals. These correlate with the freezes (to the second).
SMS refers to the Apple Sudden Motion Sensor. I disabled this by doing "sudo pmset -a sms 0" in Terminal, rebooted and everything is fine.
I have no idea why the SMS thinks the Macbook is falling every 5 minutes, but when it occures the hard drive heads are locked down to prevent damage, which is a perfect reason as to why iTunes would crash but Spotify (streaming internet music) does not.
Problem solved!
Edit:
In reply to some questions posted by other members (thank you by the way).
I did install EFI 1.7 update. I did not use the Migration assistance. At some point I will do a fresh install then pick and choose parts from a backup rather than using a full Time Machine Restore. This could still have been the root cause of the issue, but it is hard to tell.
Thanks guys!
Message was edited by: mynamestom -
Mid-2009 MBP Has Been Hard Freezing, I think it may be the SSD or software?
Please read this fully so you don't end up suggesting something I've already tried.
I have the Mid-2009 version of the 13" MBP that I received in December 2009. Almost two years ago, I upgraded it to8 GB of RAM and a 256 GB SSD. Everything has been running smoothly until about 2 or so weeks ago. My computer has been having hard freezes, meaning, it's not simply an application freezing up; force quit doesn't work, the clock stops ticking, the whole system freezes. It was very predictable too. Whether i was watching youtube videos with flash, reading online articles without it (I have ad block) or doing something completely non-flash or web related, my computer would hard freeze after about an hour or two or so of use, requiring a hard reset (holding the power button until it turned off and then restarting).
I did some research on this and from what I initially found I thought it was problems with the motherboard. However, I found that to be odd because my motherboard was replaced by Apple in September 2012. I read somewhere to try a system hardware diagnostic test (press D upon start up). On the short hardware test, the one that only takes a few minutes, it passed without any problems. Then I tried the longer hardware test, the one that says takes more than an hour. I put that one on and left it alone. I came back every so often and checked on it and it was fine at first. The mouse responded and the test was showing some measurable progress. However I came back, and at 2 hours 11 minutes and 59 seconds into the hardware test, it froze without completing it.
Then I tried doing something everyone says to do when anything happens: I repaired disk permissions. I did that, and according to Disk utility everything went rather swimmingly. However, that didn't fix anything,in fact, it made things slightly worse. Ever since I reset disk permissions, everytime I open Safari, it freezes immediately, and that has only happened since I repaired disk permissions. My home page is about:blank, if anyone was wondering. I've only discovered this happening with Safari as of now. I switched Chrome as my primary web browser for now.
Being the resourceful person I am, I tried to isolate the problem. My sister, luckily, has an identical MBP. First, using target disk on my computer, I booted my SSD onto her computer - this is to see if the problem was HDD/SSD related or motherboard related. When I booted my SSD onto her computer the same problems occurred: Safari froze upon start up, and then computer would hard freeze after about two hours. However, when I booted her HDD onto my computer via target disk, there were no problems. Safari opened just fine and I used her computer for several hours without issue.
At this point, I was pretty sure it was the SSD, but I thought it was possibly a bad Sata cable or something. But nope. Last night, I switched harddrives completely. No target Disk. I put my SSD in her computer and put her HDD in my computer. I got the same results as target disk. It can't be the motherboard or memory, because both computers worked fine with my sisters harddrive. Only the computer booted off of the SSD would have these problems.
At this point I think it could be two possibilities
A) Either the SSD itself is starting to become defective
B) Some software component of my SSD is buggy
I think it could be something software related because why would Safari and safari only freeze after launch, but no other apps? Also something of note, these problems were happening, I tried to see if doing anything with software update would help, updated everything that needed to be updated, and these problems still occurred.
What do you guys think? anyone have an idea of what it could be? Any suggestions of how I handle this? Applecare is expired. I'm considering doing a clean install but I'm not fully backed up yet and I don't want to waste my time and have it not work. But I also don't want to buy a new hard drive or SSD and have it do the same things. And I'm not getting a new computer if the only problem with it is contained within the storage unit, whether that problem is within the software or hardware related.
Responses and suggestions would be highly appreciated, thanks.
EDIT: this information may be of interest: currently have 19.51 GB of available space (out of 256 GB). At one point, about a month and a half or so ago, my storage was as low as 9 or so GB free.
I am running OSX 10.6.8I have tried making a new user account like you suggested. It fixed the Safari problem; Safari opened and played video just fine. However, the computer still hard freezed after about 2 hours. I am about to back up my computer via time machine after this (hopefully it'll finish before it hard freezes again, I haven't backd up in more than a year). If that doesn't work, I guess I'll have to move folders individually onto an external. I will proceed after backup with a clean install as that is my only other option for now.
However, after a clean install, should I restore directly from time machine? I would think wiping the hard drive and replacing it with what's on time machine wouldn't solve the problem because the inherent corruption is being restored. However, what about just restoring my User folder? What would the process be for getting everything back to normal as quickly as possible? Do you know of any good ways to get my apps and other preferences back to normal ASAP without corrupting anything? Will I have to re-register anything? For example, I have Adobe CS4 that I received from my highschool IT department. I have since graduated, so I don't have the disc or any of the password codes. Would it be risky to restore the application support folder (because that's where the bug may lie)? Or if I just drag just drag apps, would that still work or is the application support necessary too? -
I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?
This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
Maybe you are looking for
-
Why can I not install Adobe Flash Player on my Samsung III phone!?!? Are you kidding me!?
.Why can I not load Adoble Flash Player onto my Samsung III phone !?!?Are you kidding me!? Or am I doing something wrong?
-
Incorrect dates on iPhoto '09 photos
After upgrading to Mac OS X (10.6) the date that is shown in the photo info window, together with the location and description, is wrong, but the dates shown in the extended photo info are all correct and the Event dates are all correct as well. In t
-
How do i dynamically reference the contents of an item in a where clause
I have a select statement that references an item i.e. 'where sysdate=:diary.day1' at the moment, however i want to use this select to loop through every day of the week, so on the fist record it will change depending on where you are in the loop eit
-
My tool bar has no eyedropper. It used to, but now it doesn't. It's driving me crazy; where can it be?
-
Purchased full game as an in-App purchase now can't share.
I did an in-App purchase in order to unlock the full game features but now I can't share this game with my husband's iPad that has the same account. It will only download the original free version not the unlocked version. Please help.