L655D-S5055 LCD horizontal line issue - possible motherboard or GPU failing??

Hello,
A few weeks ago a horizontal line running from the left edge to the right edge of the LCD about 2 1/4"
from the bottom of the LCD started to occur.  The line shows up from the time the screen turns on
and remains in CMOS or the Win 7 desktop.  I have replaced the LCD panel with a new OEM LCD
panel, this did not resolve the issue.  I replaced the internal video cable, this did not resolve the issue.
Since the line occurs in the CMOS screen (DOS prompt screen) or in Win7, there is not video driver
issue I believe.  I also updated the L655D BIOS to the latest v2.10  Nothing has resolved the issue.
Is this possibly a sign of a GPU issue at the motherboard level? I have noted that the space below the line does "flicker" or distort the image, but only below the line.  The rest of the image on the screen stays without any problem.  I have also attached the laptop to an external monitor which has no line like this or any issues with the display at all.  Thus the reason I had originally concluded the LCD panel and internal
video cable.
Does anyone know if this is a known problem with specific motherboards with this model laptop, or GPUs?
Is there a replacement motherboard program for this laptop as this is certainly a quality issue that should 
not be left for the enduser to replace the motherboard and be charged a high cost repair such as this!
I appreciate any guidance or advice on this issue.  I have attached two pictures for reference of this problem.
One shows the line in a Command prompt screen, the other while in Win 7.
[Updated: 2-Apr-2013]  based on further research and experience with other similar issues, I am beginning to think this is related to heat and the GPU impacted by poor quality soldering or some other issue of that nature.  I have performed "reballing" with other products, but am not sure about whether this issue can be resolved or how to go about an effective "reball" for this product motherboard.  A replacement, used motherboard is hard to find and if found are over $150USD.  Again, it seems unfair to the consumer to have a laptop like this for 4 years and need to replace the motherboard or live with this issue until the unit fails completely.
Thank you in advance.
MP
Attachments:
L655D_LCD2.jpg ‏9 KB
L655D_LCD1.jpg ‏8 KB

Similar Messages

  • Ibook G4. LCD - Horizontal Lines After Boot

    I am working on an iBook G4. It boots up to the Apple logo. Once the OS starts to load I get a blue screen sometimes and other times a mass of multi-colored horizontal lines. The display works fine when booted to the OSX DVD.
    I ran Disk Utility to repair the disk and it's permissions. I backed up the data on the drive and performed an "Erase and Install". I have reset the PRAM. Still getting the same issue.

    Hmm. What's the processor speed for this iBook? Is it a 12" or 14"?
    There's the possibility that you've got an issue similar to what's known as the "corey arnold" issue:
    http://www.coreyarnold.org/ibook/
    If you have an external hard drive with a Firewire connection, you could install OS X on there, then boot the machine from this external hard drive to see how it behaves.
    Any change with Safe Mode?
    ~Lyssa

  • Capturing Hi8 - Interlacing/horizontal line issues

    Hi everyone. I'm in the process of transferring some old Hi8 home movies to my computer via Quicktime Pro's record feature. I have the recording preference set to 'Device Native' and as I'm recording, the picture looks great. But when it's done recording and I playback the saved .mov file the picture looks different (horizontal lines....some sort of interlacing issue). Does anyone know what causes this? I'm transferring the tapes via a Sony digital-8 camera w/ firewire. I'm no video expert, so any help is appreciated. Thanks a lot!

    The Hi8 footage is interlaced. If you not going to dvd but going to view this on a computer screen you need to de-interlace the video.
    Here's a free program that will de-interlace the video, MPEG-Streamclip. Not the best in the world for de-interlacing, but for a free program and it's not that bad.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html

  • Skinning in 11.1.2.2 (horizontal lines issue)

    Hello,
    I followed Shays on-line tutorial
    [https://blogs.oracle.com/shay/entry/adf_faces_skin_editor_how]
    It was very helpful and informative and I defined new colours for all the images using the skinning editor
    However, I now have the situation depicted in this image link
    [http://i48.tinypic.com/zsg83.png]
    Is there a way to avoid the horizontal lines on the Form?
    As you can see, containers don't have the same issue (although you can see the horizontal lines between the accordion and the panelobox components).
    Has anyone else encountered the same problem?
    Thanks
    p.s. does anyone know what I need to change for the top part of the showdetailitem in the panneltabbed container to be red as well instead of white? (the bit just below the tabs)

    for future reference (my own)
    when adjusting the colour scheme on the skin editor image tab, avoid changing .AFLightBackground and .AFLightestNeutralBackground
    Adjusting either of these appears to create horizontal lines on the most basic of JSF pages

  • Horizontal line issue -- some new thoughts

    Hello there.
    Regarding the horizontal lines / waves issue, has anyone else noticed that the intensity of the problem varies with the position on screen? The problem is especially visible in the upper left corner of my screen, yet is almost non-existent in the lower right corner. From the upper-left to the lower-right corner, the problem degrades. This is true for both the "lines" issue and the "waves" appearing.
    You can try yourself by setting your desktop background to "Tile" and using (part of) the Crankycat picture (you can download a cropped version at http://siteffects.be/maarten/powerbook.png).
    On my machine, the waves problem is very visible in the light-blue "Sources" area of iTunes (i.e. left part of iTunes, so coincidentally in the "worst" part of the screen). When moving the iTunes window to the right, the problem eventually disappears.
    On a sidenote, has anyone tried to use the Powerbook with Linux? I'm really wondering whether a completely different operating system would solve the problem. I've tried using Ubuntu live CD's (both stable version and new "Dapper" version), but they do not seem to work. In general, I have the impression that you need kernel 2.6.15, which is the only one supporting the latest Powerbook.

    Hi Sebastian,
    When using sRGB (not IEC61966-2.1), I do see what you observe, however it is not THAT apparent.
    Except. If I increase the contrast of the screen one notch (CTRLOption+Apple.), the heavy lines/wavy lines is very obvious. But if you increase contrast two notches they go away completely. Interestingly, on my dispaly, if you chose Generic RGB, and increase the contrast one notch, the whole orange panel shows heavy banding.
    You can reduce back the contrast with (CTRLoption+Apple,)
    Yes, the bottom right is less of a problem than the top left. But I can just about perceive the horizontal banding.
    The same cannot be said of the horizontal pixel lines in the lilac panel. These only disappear if I increase the contrast so much that the display looks terrible. (e.g. until the lilac become almost pure blue). And the problem is the same everywhere on the screen.

  • Sent my PB in for horizontal line issue repair.......but.........

    Just got back from the apple store and showed a genius my display and to my surprise he said he could see the issue at the upper half of the of the screen. I tried to show him the crankycat image but he said there was no need.
    I then told hime that the part needed to be used for replacement according to other sufferers is the 646-0324 DSPL, 15.2, WXGA++,SAMSUNG,Q16C part but he said apple don't use that part number here (i live in london). i then ask if the display will be replaced anyway....he says yes.
    When i get the repair sheet, i dont see anything mentioning display replacement, all i see is a "Flat Rate Repair Charge, PowerBook G4 15"-£170" and Labor Charge, PowerBook G4 15" - £100".
    These don't sound really promising. I then request that they test the replacement display with the crankycat image and he goes."everything will be tested properly before despatch dont worry"
    From what i gather the guy just wanted to rush and get things outta the way so he could go home.
    I really don't think this will get fixed, but lets hope apple proves me wrong this once.

    Update- line issue has been fixed

  • Horizontal lines on new PowerBook display

    Here is my experience with the new PowerBook display/horizontal lines issue. Please post any constructive advice you have that I can try - either to eliminate the problem or to pinpoint the cause more accurately.
    I used to own a 15" Powerbook from about 12 months ago, a 1.33GHz model. The display on this was fine. Much better, in terms of brightness and clarity, than my other HP & Dell Windows laptops. When the PowerBook was stolen, one of the main reasons for immediately buying a new replacement PowerBook was the superior display quality.
    At the start of November the replacement PowerBook arrived - a 15" hi-res 1.67GHz model. The faint grey horizontal lines covering the whole display were immediately visible. The display is substandard compared to both the previous PowerBook model and my Dell laptop.
    Apple Care telephone helpline suggested an NVRAM reset and a PMU reset. Neither of these made any difference.
    The PowerBook was then sent back for replacement and a week or so later the new replacement arrived. This also had exactly the same problems.
    Apple Care helpline this time said that they could not find any problems with the PowerBook and I should first try the PowerBook connected to an external monitor and secondly take it to an Apple Dealer to show the problem.
    I tried it on an external monitor, but unfortunately this is only an old Nokia 15" CRT monitor and though the lines appeared to not be there, the quality of the monitor makes the result inconclusive.
    Next up, I will take the PowerBook to the Apple Store. At the same time I have copied "Aqua Blue.bmp" onto my Dell laptop. With the two laptops side by side showing the same image, the defect in the PowerBook display is clearly visible. I hope to be able to take both machines to the Apple Store later this week. I will let the forum know the results...
    So, are there any other tips/advice from users as to other tests I can run or other methods to improve the issue?
    Many thanks!
    It seems obvious, but please don't contravene the Terms of Use for this forum. If you want to complain to Apple, please do it elsewhere - locked posts will get us nowhere

    n2o2,
    I don't know what let you think that you will eventually receive an AluBook without stripe : Apple Care let you think that ???????.
    I have been reading the stripes topics each day since I ordered my new powerbook, late october. I did not see one single post proving that a "free line" 15" powerbook does exist.
    The real evidence would come from someone describing the difference between a "non affected" new powerbook sitting besides an affected one, coming from the same PB generation and with exactely the same LCD profile and screen / Colorsync settings.
    I did not see a single story like that among the hundred(s) of posts related to horizontal lines.
    I have read one post stating that the screen is "crystal clear" and "sharp". The one I received today could be described like that, but it displays those lines, except from the 8 or 10 upper rows of pixels on the menu bar.
    The pb15_problems.png file is a very interesting one to me, as it demonstrates that the lines could clearly be attenuated using a single filter without compromising the sharpness/Brightness of the image.
    If I compare side by side my 3months old previous generation powerbook and the new one, I must say that (except for the stripes) there is not much difference in daylight in terms of brightness but a perceptible better brightness in the complete darkness.
    Well, if someone could prove that some of the new powerbook do not display this "feature", this would certainly push me to return mine. But, seeing how it is difficult to get this organized, I may not want an exchange but a refund, or an upgrade for a 17".
    Please tell us quick if you win this battle.
    Luc
    AluBook 1.5 Ghz, G5 DP 1.8Ghz , G4 400   Mac OS X (10.4.3)   airport express, iPod 3 & video

  • My good story with the 15" horizontal lines

    I too received a 15" DL PowerBook with horizontal lines. I didn't record its serial number, but it did begin with W85 (one of the implicated serial batches). I took it back to the Apple Store after owning it for 4 days, spending most of that time researching what's really going on with all this. After using the pic that someone posted here in the forums (thank you!) to prove to the Genius Bar guys that there's a problem, they finally understood - even though Apple is currently "investigating the issue". They ultimately swapped out the machine for a new one.
    My new machine has a serial beginning with W85, but it doesn't have the horizontal line issue. I'm incredibly pleased, and I hope this brings some positive vibes to an otherwise bleak story of yet another Apple 1st gen hardware issue.
    17 iMac G5 1.8 Ghz, 15" DL PowerBook G4 1.67 GHz.   Mac OS X (10.4)  

    Wow! This is great news. I really had lost hope here, there were too many reports of people just getting bad displays back time after time.
    Only problem for me is that I have had the machine for well over a month, and it is BTO with 7200rpm drive...
    I'd like to be able to take it to the store, open one up and test before I swap.
    Although... I did alert Applecare of the problem a few weeks ago and told them to record my complaint and to contact me if they learn of a fix. I hope this will help. Thing is that it is getting to close to christmas now, and I'll be travelling around with the laptop.... hmmm.
    Hey - you know what? I just noticed that my machine also makes these squeaky beeps when I type! What the ****? It only occurs when I am in the middle of this message composition pane - not on the lowest line, and not in the Subject line, and not in Word.
    It is really high-pitched and annoying - arrrgh!
    I heard someone else talk about this, and I had no idea what they meant. (sorry for this being off topic - but does anyone else hear this? - specific to the Apple Forum message compostion pane.)
    It does not come through the speaker/headphone output.

  • DL Powerbook horizontal lines become cross-hatch pattern

    I'm experiencing the same horizontal line issue as many others have reported.
    I decided to try changing the number of colors my diplay uses from millions to thousands. After doing this, I notice a cross-hatch or regular little squares pattern instead of horizontal lines. It is epecially obvious on light grays such as the gray behind "Apple Discussions" at the top of this web page.
    When I use the digital color meter app with millions of colors, the gray I'm talking about is one uniform 88.6% in RGB, but when I change to thousands, a regular pattern of 90.6% and 87.1% RGB pops out. And, when I move the window around the desktop, the pattern of dark and light grays changes, but always from one obviously regular pattern to another.
    When I do the same changes and measurements on my old 17" cinema display hooked up to a powermac G4, the RGB numbers are approximately the same, but there is no (easily recognizable) regular pattern. So instead of looking like a cross-hatch or a bunch of little squares or whatever, it just looks gray. With thousands of colors, my new powerbook chooses to draw a regular pattern in a solid color, while my old powermac doesn't and the pattern it chooses depends on the window's position on the screen.
    I don't know if it means anything, but it's clearly a difference in color display between a cinema display with no horizontal lines and a new powerbook with horizontal lines.
    But, this doesn't work in millions of colors. The DCM tells me there are no color differences in the light gray, even though my eye can clearly see horizontal lines.
    Any thoughts?

    Hi Charles,
    You're quite right in this description.
    I noticed the sort of textured look on the screen even before I noticed the lines. It's kind of like the texture of a polo tshirt only very subtle and finely detailed.
    Anyway, how did your attempt to return it at the Apple Store on Miracle Mile go?

  • Faint horizontal lines accross iMac lcd

    Had a 24" iMac that developed faint horizontal lines across the lcd that got progressively darker the longer the computer was on. Had the lcd replaced by Apple twice, but after a couple of weeks the problem returned. They gave me a new iMac, but a month in I have the same problem with the new machine. Has anyone encountered this problem? Is it an inherent issue with iMac lcds or is it something external affecting my machine? And I'm not talking poltergeist. Help, want this fixed.

    We have a 20" imac Core Duo that was purchased summer 2006 - then about 5 or 6 months ago, it started developing horizontal lines across applications (Safari, Mail, etc) and the desktop - sometimes they would go away, sometimes not... I thought is was some video driver conflicting, upgraded to snow leopard, went to the genius bar, etc... but lately it got worse to the point that it started locking up every day... this after going weeks or months without a reboot and over 3 years having almost zero crashes...
    I read in a forum where the video chip (GPU - graphics processing unit) was heat sensitive and thought that after 3+ years, maybe it was dusty in there... I installed the iStat widget to monitor the temp of the GPU and installed a fan control (software) where you can increase the minimum speed of the hard drive fan (allegedly located above the GPU). I also put the end of the vacuum on the fan vent just above where the power cord goes into the back of the monitor and let it run for a while hoping to clean things out...
    5 days later - zero display issues, zero hangs and zero crashes - and the GPU runs an average of 25 degrees cooler than before. This after a genius bar guy told me that it probably needs a new display board. Good Luck!

  • MSI GS60-2PC Screen flicker and horizontal black lines issue

    After about 2 weeks of using my GS60, I began to notice that the screen sometimes flickered, and on other occasions horizontal black lines would appear. I have updated my GTX driver to the latest version, and I haven't been able to find any help on the net. Does anyone know how to fix this issue?

    Hi!!! I'm Manuel from Argentina. I bought a MSI GS60 in miami 5 months ago, and... I HAVE THE SAME PROBLEM!! sometimes mi screen is flashing and appeared horizontal lines  (blacks).
    There's no solution for this problem? it's a very expensive laptop.
    I hope someone can help.
    greetings from Argentina!!

  • Smart form footer issue in 2nd page - Horizontal line is not displayed

    Dear Experts,
    I am working on a smartform. Which has a table (Header, Main area, Footer), When there are more records and footer alone is printed in the 2nd page, i am not getting the first horizontal line for the footer and it does not look like a table in second page.
    My smartform table exactly looks like this when printed in a single page.
    |_________|______________|_________________|____________|________________|__________|  - Header
    |_________|______________|_________________|____________|________________|__________|  - Main Area
    |_______________________________________________________|___________________________|  - Footer
    When the footer alone is printed in second page, i want to print as
    |_____________________________________________________|__________________________|  - Footer
    But its printed as
    |_____________________________________________________|__________________________|  - Footer
    When the item records are printed in multiple pages, i will have header and item records in every page. The problem comes only when the footer alone gets printed in separate page.
    Please suggest me how to fix this issue. Thanks in advance.
    Rajesh.

    hi rajesh..
    check the line type for that footer. It's getting displayed properly on multiple pages because the lower line of other rows is getting overlapped on the upper one of footer. This is why you dont recognize it.
    On single page there arent any other rows. So it shows a blank.
    So as samreen said make the top line of that line type bold.
    Regards,
    Sumit.
    Edited by: Sumit Nene on Aug 28, 2009 7:02 AM

  • 40 inch Samsung LCD White Horizontal lines running up the screen constantly

    My brand new Samsung 40 inch tv (purchased in mid-December) has white horizontal lines running up the screen constantly.  From what I heard, the electricity in my house my not be grounded, but no other tv in my house does this, so I doubt this is the case.  Has anybody else had this issue and is it too late to return the tv?  Thanks.

    Does it do it on other sources like a DVD?  If so you may have a TV problem. Have you tried to do a factory reset or restore? Have you tried plugging it into an outlet in a different part of the house? As a last resort have you tried taking it back to the store and see if it works there? Also have you tried a filter on the AC plud in? Just some suggestions to try and help you out.
    Bob

  • Horizontal lines flashing on the screen amoung a lot of other issues

    I have horizontal  lines the flash at various areas on the screen they are sometimes white or gray and have some solid colors like blue or green.
    I also called and  reqested that recovery disc be sent on the 9th of january because of error eb1b068a  and i still have nothing.
    Yes this is that crappy black friday laptop that has cost me nothing but headaches and yes ot's too late to return to best buy.
    Type:    Model: 
    4383    43U   
    Thanks.

    hi angryone.
    usually green lines points that you are having ram or graphic card ( could be also converter cable issue )
    can you check if your ram sticks working fine? you can also try to remove/replace?swap the ram sticks and use one of each time to check if it is ram issue.
    if it doesn't help, i'm sorry to say that but you will need hardware support so i suggest you to contact lenovo support line.
    hope this helps.

  • Horizontal lines on lcd monitor

    Hello all,
    Our less than 2 year old 21.5" Intel Imac (OS 10.6.8) started to display horizontal lines at the bottom portion. Those lines are always present at the same position. They have been gradually invading the screen rendering it soon unuseable. Otherwise the Imac is functionning flawlessly. The computer is installed in a clean domestic area with no heat source in proximity.
    I have completed the harwhare test application on startup to confirm that all components (including the graphics card) are functionning perfectly.
    I have also taken a screen capture (shift-cmd-3) and sent it to my well functionning Macbook. The screen capture picture of the Imac is flawless. This would indicate by deduction that the LCD screen is flawed.
    Is there by anyones knowledge a fix to this rather premature problem?
    Regards
    Marc Arsenault

    Same happended to me, just call to support center and thay said there`s no such failure  on their data base, and that i have to fix it my self, this folks only care about their wallets they don't care about customers.

Maybe you are looking for

  • How to remove the delete and edit toolbar buttons from the Overview page

    Hi, In the account/contact overview page, we see that the interaction history assignment block does not support the EDIT and DELETE options. However, when we click on the hyperlink description of an activity in the interaction history, we get into th

  • Simple java question, help please

    please help -i am just starting out in java and im havin an early problem. Im trying to run a small java script from a commant prompt but im getting the following error after i enter this command at my prompt c:\javatest>javac HelloARP.java javac is

  • Plugin Dialog not visible in Photoshop CS4 64bit

    Hi all, I am new in the world of photoshop plugins. I am using adobe photoshop CS4 64bit environment. I have converted a 32bit plugin into a 64bit plugin. I have succesfully loaded the plugin . Now my problem is when i click on the pluginName from th

  • Mousekeys, Stickey keys and Final Cut Express HD

    I recently purchased and began learning FCE HD. I am a physically challenged user with no use of my arms and hands (quadriplegic). I use a mouthstick pointer and Mousekeys and Stickey Keys to operate mmy iMac G5. For those of you not familiar with th

  • Bex Error: not authorized

    Hi, This time the error is: "Warning You do not have authorization to read object ZCOMP_CODE 'Company Code' " I get this message while runinng a report. Is it because of authorization? How can I check auth if at all? Or should I refer it to basis? th