L675D-S7016 (PSK3JU) gets FreeDOS errors using CD method to install BIOS version 1.50
I downloaded sk3jv150.exe from Toshiba's support site and followed the instructions to create a bootable CD to flash the BIOS. In fact, I have created the boot CD several times using different programs on this laptop and even on two other PCs but have had no success.
Whenever I boot from the CD, FreeDOS starts and the following error messages appear:
-InitDiskWARNING: using suspect partition Pri:1 FS 01 with calculated values 1-0-1 instead of 0-1-1
WARNING: using suspect partition Pri:1 FS 01: with calculated values 255-0-63 instead of 1-0-63
C:HD1, Pri[1],CHS= 1-0-1, start= 0MB size=7M
This laptop came with Windows 7 Home Premium 64-bit and I purchased it new in the Fall of 2010.
Any ideas?
After you receive the error you should be at a C: prompt. Enter BIOS.BAT and hit enter. This should lauch the BIOS flash application.
Similar Messages
-
I am getting this error message when trying to install free version of photoshop..."This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance. What am I doing wrong?
From the error message it appears that you are facing difficulties with the Adobe Download Assistant. The error message is related to Adobe AIR which the Adobe Download Assistant utilizes. Please remove your current installation of Adobe Download Assistant and reinstall. You can find more details under the known issues section of Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Known_i ssues.
-
Why do i keep getting an error message of 2096 when installing any version of itunes
Why do I keep getting ann error of 2096 when downloading any version of itunes. It tells me to delete itunes and reinstall.
That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
I'm getting no error using float in cldc1.0 with wtk2.2?
I'm getting no error using float in cldc1.0 with wtk2.2?
ravikumar.tj wrote:
Please set wtk settings as cldc1.0 and midp1.0.
Create a subclass of MIDlet as-
public void startApp()
float f;
double d;
Press Create Package, Jar and Jad files are getting generated successfully.
If Cldc1.0 doesn't support float, I must get Compile error, isn't??That's ok, but just because you're not doing anything with those variables so the compiler ignores them.
This should give you a preverify error:
protected void startApp() throws MIDletStateChangeException {
double d=0.5;
} -
Every time I try and install an extension for Safari I get the error message "Safari can’t install this extension, An error occurred while installing the extension “Pin It Button”." I have all the latest updates, working on OS X Yosemite v 10.10.2 / Safari v 8.0.3. Any suggestions?
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to search for an item named "Safari Extensions List". If found, delete it. Quit Keychain Access.
Quit and relaunch Safari. -
I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes). Can somebody advise, please?
Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!
-
When I try to update from CS5 menu, I get an error that they did not install
I am running CS5 on Windows 8.1. When I try to update from CS5 menu, it appears updates are downloading, but then I get an error that they did not install (no error number), and contact customer support. When I click on that I get a discussion about incorret serial number. I deactivated, then reactivated, get same results.
Yay! Finally got it to work.
Deactivated CS5 and uninstalled. Then reinstalled. Downloaded and installed AAM (took several tries before finally got it to work properly). Then download the updates individually and finally got to install using AAM. -
I get an error message when trying to install software update 4.2.8
"problem downloading, network connection timed out. Check network connections."
Anyone one else had this problem?Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799 -
I can't finish the installation of Itunes for windows. at the end of the installation I get an error. How can I install this programm?
See if the user tip: https://discussions.apple.com/docs/DOC-6562 helps out with your problems.
-
When i try to download Xcode i get the error that it cannot be installed on "macintosh hd"
when i try to download xcode i get the error that it cannot be installed because of "macintosh hd" and me not having os x version 10.8.4!!!
please help meCorrect.
System requirements for XCode is 10.8.4 and above. Since you have 10.7.5 it can't be installed. -
How can i restore my ipad to factory settings?
Getting error message 4005 so re-installed latest version of itunes, restarted computer, everythingis up to date. Still getting error 4005. This happened when I went to update software. Face of ipad showing a cable not connecting to itunesUsually a USB error. Read here:
http://support.apple.com/kb/ts3694#4016
To restore ipad: Settings > General >(Scroll down) >Reset > Erase All Content & Settings
Cheers,
Alec -
im getting an error message when trying to install the application cd on my Imac os x 10.6.4 what can I do to solve this problem?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
i update my mac today... i'm trying to purchase FaceTime but i get this error "FaceTime can’t be installed on “Macintosh HD” because the version of OS X is too new." :S
https://www.apple.com/support/mac-apps/facetime/
-
I'm getting an error code 499 since I installed the new windows explorer
I'm getting an error code 499 since I installed the new windows explorer. I changed the parental settings in explorer, but it's not solving anything. Anybody have a solution?
In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: Troubleshooting security software issues -
i cannot connect to internet im getting the error message: no network adapter installed or configured. what can i do?
Sherya, welcome to the forum.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
I believe that this is a problem for your ISP. Their Customer Service should be able to help you. There may be some settings that can be changed to solve the problem. They would know what the settings should be. I don't believe that it is a hardware problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.
Maybe you are looking for
-
Without changing the application source, after the upgrade from Upgrade from JDeveloper 9.0.2.289 to 9.0.3.1035 we are receiving the runtime error code: oracle.jbo.AttrValException: JBO-27014: Attribute AtyId in Appointmenttypes is required at oracle
-
Hyper-V guest boots to recovery console after shutdown
I experience the following scenario: After a hyper-V host (W2008R2 Ent.) is restarted, the guest VMs (W2008R2 Ent.) boot randomly to recovery console. This means some of the VMs boot correctly into Windows server environment while others boot into re
-
Export to PDF- Colour Setting-------Convert to Destination Issue
Have recently synchronized all colour management in adobe CS, after creating new output destination profiles for printing press. All seems well and good when photoshop files are in an kept in RGB with original source profiles. They convert to destina
-
Thanks for setting up iCloud on an iOS divice
thanks for iCloud on an iOS dicice please tell me how to set up iCloud on android
-
How to make multisim 11 files (.ms11) work in labview
I have designed a step down DC-DC converter circuit in Multisim 11. Is there any way that I can use this circuit as a VI in LabVIEW? I have an algorithm VI that hopefully can control the duty cycle in the DC-DC converter circuit I have designed. Than