L720 SIM Connection Points Broken - Repair Possibl...

Accidently, i damaged the sim connection points inside the sim jacket. The phone does not pick up SIM anymore. Took it to local repair shops, they tried but it did not work. They say the micro SIM jacket has to be replaced and it is not available in market yet. Would Nokia Care be having it and is repair possible? Please note it's the sim jacket on the board, not the one you put the sim on and then place it into the slot.
I fear the phone is gone for good. Has anyone had similar experience and did your phone get repaired by Nokia Care?
Phone is Lumia 720 - I bought it exactly 2 years ago and although it has visited Nokia care thrice, still I love the Windows Phone. Cannot imagine dropping it for any other mobile

This can often happen if an older-style Mini-SIM that has been cut down to Micro-SIM size because the older ones were slightly thicker. As has already been said, the repair could be expensive.

Similar Messages

  • HT1338 trying to download mountain lion OS, but whenever the net connection is broken it restarts from zero, how to prevent this and start downloading from the point it was disconnected

    trying to download mountain lion OS, but whenever the net connection is broken it restarts from zero, how to prevent this and start downloading from the point it was disconnected

    Disable anti virus software and try turning off the Firewall in System Preferences > Security & Privacy > Firewall.
    Quit then relaunch the App Store. From the menu bar click Store > Sign In
    Then click Store > Check for Unfinished Downloads

  • COM: "Add Connection Point" does not generate Fire_* methods (VS2010)

    I'm currently attempting to implement a COM component with event support using connection points.
    I've followed the general instructions given in
    http://msdn.microsoft.com/en-us/library/9h7xedd1%28VS.80%29.aspx and
    http://msdn.microsoft.com/en-us/magazine/cc163361.aspx .
    Meaning I added a method description to the IDL file, generated the underlying type library by doing a compile on the IDL-file, and performed the "Add Connection Point" on the class in class view.
    Following this procedure works like a charm for new projects - connection points are created without problems. However, on the project I've been working on for a while the necessary Fire_* methods are not created. The CProxy_* class is created, but it's
    empty except for the class declaration (no methods)).
    I've been looking around the net a bit and I noticed I'm not the only one having this problem. So I was wondering does anyone know what could cause this, is it a bug and, if so, is there a way to solve this?
    update:
    Similar problem 1
    Similar problem 2

    Hello,
    For
    the IDE wizard issue, please consider the following lists of items that we can try.
    1. Have we applied the latest service pack? If not, apply the service pack.
    2. If we reboot the operating system to safe mode, do we have the problem? This can help to isolate whether any other applications are interfering
    with Visual Studio. Note that some features (like IIS) are not available under safe mode. Please check whether this can apply or not. In addition to safe mode, we can also suggest “clean boot”:
    http://support.microsoft.com/kb/310353.
    3. If we create a new user account, do we have the problem? This can help to isolate user profile corruption related causes.
    4. If we disable Add-ns (e.g. “Tools” | “Add-in Manager”) and run “devenv.exe /safemode”, do we still have
    the problem? This can eliminate the possibility that third party Add-ins are causing problems.
    5. If we create a new project, do we have the problem? Sometimes corrupted project settings can cause problems. These are project specific.
    6. If the problem remains, we can use Visual Studio Setup Wizard (via Control Panel) to repair Visual Studio. It can restore the Visual Studio
    Installation into its original state.
    Cheers
    Yi Feng Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.
    Welcome to the All-In-One Code Framework! If you have any feedback, please tell us.

  • Display the name of the connection point

    Hi,
    I would like to display the name of the connection point added via shapesheet to be displayed on the shape as part of the shape text. Is it possible in Visio?
    Thanks,
    Rohit

    You will probably have to write a macro (vba) to accomplish that.
    al
    Al Edlund Visio MVP

  • Connection Points using ActiveX in TestStand

    Hi,
    Had a query . Is is possible to register connections points using Test
    Stand. I am having a COM Dll which incorporates Connection Point
    Mechanism. I am able to use this using VC++ client. But not with Test
    Stand Application.
    Regards....

    That should handled in code modules you write rather than purely in a sequence. Your connection point handlers could set TestStand globals, use TestStand synchronization objects (such as queues or notifications), write to files, set DLL globals, or use any of the dozens of other possible methods to communicate with TestStand sequences

  • I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    I am trying to set up internet sharing from my macbook air but there does not seem to be an option for this because the air is connected to the internet via wifi connection. Is it possible to still share this?

    It depends upon how the other machines are connecting to your MBA:
    If the the other machines are also using wi-fi, they can connect directly to the wireless access point (router) without going through your MBA
    If the other machines are connecting to the MBA using ethernet you can share your wi-fi connection to them

  • Moving router connection point.

    Yesterday the BT engineer came round and installed Infinity in the house - everything works fine.
    The problem is that connection point that I requested is only a temporary point - at somepoint I want to rig up a home network and put ethernet sockets in some rooms.
    The original master socket was at Location A.
    The engineer setup the open reach infinity socket at Location B.
    The socket at Location A looks like this one:
    http://helpforum.sky.com/t5/image/serverpage/image-id/635i42831032043407CB/image-size/original?v=mpb...
    The socket now at Location B looks like this one:
    http://phil.lavin.me.uk/wp-content/uploads/2012/02/fttc-faceplate.jpg
    Originally the socket at Location B was a plain old phone extension socket.
    My question is; how can I go about moving the modem from Location B to Location A? Is it just a case of procuring another faceplate and fitting it at Location A? Or is Location B now the master socket and an engineer will be required to make Location B the master socket?
    BTW; the engineer told me that it is copper running into the house not fibre optic cable.
    Thanks,
    Ben.
    Solved!
    Go to Solution.

    Yes socket B is now the master socket.
    The only person/people that can move the master socket is Openreach or one of their appointed contractors.
    If you want / need the modem at socket A you can install your own data cable.
    Method A High quality RJ11 to RJ11 cable.  The maximum length being 30 meters.  This cable should be as short as possible as it directly affects overall connection speed.
    Method B using the centre pairs of wires from the cable in method A you can connect on to the back of the RJ11 socket inside the master socket.  Others please comment - Are you allowed to do this yourself?  I know Openreach normally do it this way.
    Keeping the modem at Socket B and the router / HomeHub at socket A
    Method A Connect the two together using a longer CAT5e or better network cable.  This can be up to 100 meters long.
    Method B Conenct the two together using ethernet over power adapters. Others please comment!
    Yes the technology you have brought into is FTTC, Fibre to the Cabinet. The connection between your premises and the telephone exchange goes via a local street cabinet.  Your connection to the cabinet is by copper cable. Unless you are unfortunate and then it could be aluminium.  The cabinet now houses the DSL equipment that used to be in the exchange.  Between the cabinet and the exchange is a fibre optic connection shared by everyone that is connected at your cabinet.
    Hope this helps.
    Dave

  • Unable to create a Service Connection Point

    Hi -
    I set up a new SharePoint 2013 environment.  Everything installed successfully.  When I launch Central Admin, it doesn't accept my logon ID/password.  I found the following in the application event logs.    I assume our AD guys will
    need to set up a new SCP as pointed out here:   http://technet.microsoft.com/en-us/library/ff730261.aspx
    I just don't recall having to ever do this before in any of the dozen or environments that I had set up.   
    Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
     Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=cprt,DC=adt,DC=net doesn't exist in the directory.
       at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
       at Microsoft.SharePoint.PostSetupConfiguration.CentralAdministrationSiteTask.ProvisionAdminVs()
    By the way, when I tried to run PowerShell to create the Admin Content DB, I got this error, even though the install account has sysadmin privileges on all databases: 
    New-SPConfigurationDatabase : Cannot connect to database master at SQL server
    at SP2013Server -AdministrationContentDatabaseName. The database might not
    exist, or the current user does not have permission to connect to it.
    At line:1 char:1
    + New-SPConfigurationDatabase -DatabaseName SharePoint_Config -DatabaseServer
    VMRS ...
    I just went ahead and then ran the Product Config Wizard and it set up everything fine.  Some folks were able to resolve by running config wizard twice? 
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/6ae61eb1-9405-4421-9bc7-a0037f4ec29b/sp1-upgrade-failure-service-connection-point?forum=sharepointadminprevious

    Hi,
    According to your post, my understanding is that you were unable to create a Service Connection Point.
    To resolve the “Unable to create a Service Connection Point in the current Active Directory domain”
    error, you need to make sure you have permission to write to this container.
    “You have to grant permission to write to this container to any user accounts or domain accounts that could run the SharePoint Products
    Configuration Wizard. If the account does not have permission to write to this container, the following warning will appear in the log file for the SharePoint Products Configuration Wizard:  Unable to create a Service Connection Point in the current Active
    Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.”
    http://technet.microsoft.com/en-us/library/ff730261.aspx
    The “New-SPConfigurationDatabase : Cannot connect to database master at SQL server”
    error is a common issue and has various resolutions.
    More often than not it is a firewall issue on the SQL server so check that OR it's that SQL server has not been enabled for remote connections.
    I would recommend you follow all the steps and options in
    Cannot connect to database master at SQL server
     and
    SharePoint Install – Cannot connect to database master.
    More information:
    Configuring Service Connection Points for SharePoint 2013:
    http://onpointwithsharepoint.blogspot.in/2013/06/configuring-service-connection-points.html
    Thanks,
    Linda Li
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • Airtunes : connection is broken

    Hello,
    I have problem with my Powerbook G4 12' and Airport Express. I use a wireless connection to access the Internet (wifi router provided by my ISP) from the powerbook. This works quite fine. The Airport Express is only used to stream music via Airtunes, not to access the Internet.
    I listen the music in iTunes, which is then transmitted to my stereo via Airtunes. But sometimes the airtunes connection is broken. Then I also lose my Internet connection. I mean that the powerbook cannot find the Internet wifi connection. I have to reboot my router...
    It seems that this occurs when the Powerbook goes to sleep. The Airport Express connection is definitely lost and its light is flashing orange. Even in the Airport Admin tool, the airport express has disappeared. Very strange... Maybe should i switch off the "go to sleep" fonctionality" of the powerbook.
    I recently upgraded to 10.4.7, but this does not solve the problem. the Airport express firmware is 6.3
    Thanks in advance.
    Powerbook G4 12' Mac OS X (10.4.7) AE

    Hi meka!
    Please go to http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=63&t=000072 ;)
    Regards, Volodymyr.

  • Trying to upload Transportation connection point

    hi guys,
    I am tryind to upload Transportation connection point (transaction 0VTD) through LSMW using the recording method. But when i run the LSMW program in background it thorughs an error "No batch input data for screen SAPL0VTR 2310", probably it is because i am missing some screen in the recording. Could you please suggest me a solution on this?
    Is there any other method of doing this upload?? BAPI,IDOC's, Direct Input????

    should I use BDC recording ??

  • An HNAP call to the device failed because the HTTP connection was broken - EA3500

     OK - thanks in advance for your help -
    I have a linksys Linksys WMP300 and am able to connect to the EA3500 (shows connected at 270 Mbps) Excellent Connecttion but I can't access the internet or any of the other computers on my network.  The stupid thing is that I can connect to my neighbor's unsecured network which is also a linksys router.
    All of the other computers on the network connected just fine - my son has a laptop running windows Vista, we have a family computer using Vista, my wife's laptop is Windows 7 (we just had a guest that connected just fine).
    Here's the error code I get - any help would be appreciated!
    Error code: 82BD0304
    Error description: An HNAP call to the device failed because the HTTP connection was broken.
    Model name: unknown
    Model number: EA3500
    Serial number: 12C10603215584
    Firmware version: unknown
    Operating system: Windows XP SP 3
    Software version: 1.4.12005.2
    Connection type (WAN): unknown
    IP address (LAN): unknown
    IP address (WAN): unknown
    Computer IP address: 192.168.1.36

    Thank you for the reply - 
    Router is assigning IP address automatically. Although I have been using a static IP address in the past, this is no longer the case.
    The WMP300 is on an Windows XP, SP3 PC.
    Since running into this issue, I have not only disabled all security (to make sure that firewalls and/or virus software was causing problems) I completely uninstalled my McAfee. I have disabled Windows Firewall also. "Flying Naked" as it were.
    I am surprised that Cisco has no solution - others are also having this problem.
    It MUST be the router - I am able to connect to my neighbor's router, able to connect to my old Linksys WRT150N. Anyone else have thoughts?
    This is frustrating.

  • XY Chart - Connecting Points

    Post Author: apskhanna
    CA Forum: Xcelsius and Live Office
    It seems Xcelsius is unable to connect the points drawn using XY chart, unlike in Excel. This is a major limitation and I was wondering if any one knows how to acheive that directly or indirectly. I need to draw lines at an angle using a variable but am unable to because there are no drawing aids or possibilty of connecting points on the xy chart.

    I currently face the same limitation and am really curious about any workarounds to display a trendline connecting the points of an XY Chart.
    Thanks for any kind of help.
    Edited by: Christian Tobias Schieck on Jul 29, 2008 5:13 PM

  • #include "%(Filename)_i.h" inserted into C++ source after adding connection points to ATL object using wizard.

    What is the subsitution for this appearant macro?  Solution will not build if removed.
    Using
    Adding Connection Points to an Object directions.

    Hi Shawn,
    Since you have posted this issue to the VC++ forum, I think you would get better support there:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/8494410e-9578-4b67-a08d-3380aac10fcf/include-filenameih-inserted-into-c-source-after-adding-connection-points-to-atl-object?forum=vcgeneral#503cbc06-40a2-4073-a56e-1b384b11b56e
    So I will move this thread to the Off-topic forum. Thanks for your understanding.
    Sincerely,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on.

    My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on again. Has anyone else experienced this problem and if so, is there an easy fix. I have been advised by Apple that the latest IOS update may overcome this situation but I'm only on slow download speeds and 690 Mb would take forever. I would appreciate any advice.
    Best regards,
    Rob.

    PinguXeF wrote:
    , while I have taken a backup of the iTunes Library,
    this means nothing if it was not done correctly...
    To have  EVERYTHING on a New Computer...
    From your OLD computer...
    Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    Full Details Here  >  http://support.apple.com/kb/HT1751

  • Application crash with message "Hidden Wnd that Fires connection points"

    Our Swing application regularly crashes with a Windows error message popup.
    Title: "Hidden Wnd that Fires connection points: javaw.exe - Application Error"
    Message: The instruction at "0x7c912905" referenced memory at "0xfffffff8". The memory could not be "read". Click on OK to terminate the program. Click on CANCEL to debug the program."
    Our logfile contains SystemOut, SystemErr and log4j entries and shows nothing. Also no hs_err_pid is written to the file system. Google did not find anything when searching for the message box title.
    Environment:
    Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
    Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode)
    Microsoft Windows XP [Version 5.1.2600]
    Does anyone have an idea what could cause such a problem?

    How do I check if NIO is running non-blocking mode ? I am reusing a tcp/ip basic class (provided with my embedded interface chip) which does not mention it being either way.
    I only tried in browser. I have to add code to handle the applet viewer case. it crashes in every browser I tried and has no console dump in any. I put it together quickly for a customer and did not add debugging messages in the code since it was provided and working...
    Gotta go do that now.
    Thanks

Maybe you are looking for