L7680 Will not align. Black will not print.

Printer fails the Alignment test.  When it prints, the black is not there.  Changed black ink carts to no avail.

Hi Dutchman4,
Thank you for trying my suggestions, at this point I would recommend to please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best regards!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • Front panel not aligning properly on scale print

    So I've created a custom print VI with various graphics that I'd like to print on an 11x17 sheet of paper in landscape mode, but for the life of me I can't get the thing to align properly.  I want the front panel to print centered with 0.1 - 0.2 inch margins all around, but instead of doing this, the front panel will sometimes print aligned to the left and top or other times to the right and top (with wrong margins always on two sides, sometimes three or four).  I'm using a programmatic call to the easy print function that scales the front panel to fit on this size.  However, even after making the proportions of objects on the VI 11:17 (vertical: horizontal) I still can't seem to get this thing to center properly.  Any ideas of what the problem could be?

    Ok, So I created a blank VI with a 1280 x 1978 frame decoration, yet the print preview in labview still doesn't seem to show the thing with proper alignment.  
    Looking at the picture, looks like it's aligned along the right and top of the page rather than uniformly centered.  Ideally, the frame would uniformly cover all the edges around the page in the preview.  I suspect this is an issue with LabVIEW and not my printer, as I can set my printer to borderless printing. 
    Any ideas? 
    Attachments:
    print align.JPG ‏22 KB

  • HP 8500 "do not align" still keeps aligning..... unsuccessfully

    I jammed a sheet of labels in my HP 8500A printer.  The sheet came out without missing any sections and printer said it needed to align.  Alignment failed. Everything however continued to print fine, I just had to click "do not align" before each page printed. 
    THEN the power blinked and I had to replace an ink cartridge.  (I have ALWAYS used only genuine HP ink cartridges)  Now the printer continually tries to align and even when clicking "do not align", it still aligns unsuccessfully.  After reading several blogs and watching several You Tube videos and going through about 50 sheets of paper, physically cleaning printheads, recalibrating, etc, and installing $100 worth of all new colors of ink, I'm very frustrated.  I get that this printer has a major issue with this problem, but I still don't want to toss a perfectly good printer (with $100 worth of new ink in it) if I could just get the alignment feature disabled.   
    I run a business and have always been very loyal to HP, but I'm reconsidering unless this gets working quickly.  I've already lost most of a day on this.  PLEASE help with useful posts.  Thank you.

    Hi @AndyCamp 
    Although the document I have found for you is not specific to the type of alignment issue you have described, I feel solutions 1 and 2 could be helpful; 'The following printhead appears to be missing or damaged' Displays for HP Officejet Pro 8500A e-All....
    This document may be most helpful; 'Alignment failed' Error Message Displays on the All-in-One.
    This second document might help identify the issue, thus helping you to resolve it.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Black will not print all other colors work

    black will not print others colors will

    The troubleshooting steps in the document here may help resolve black not printing on your Photosmart 6510.  If the above fails the post here may help (it is for a different model but same principle applies.)
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Canon mg3200 will not align correctly prints is blurred

    Canon mg3200 will not align correctly prints is blurred. I have used the canon print head alignment several times. It will print some of the picture correctly and the rest is out.

    Hello,
    Please try the procedures outlined in the link below:
    http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
    If the issue persists at that point, the best thing to do would be to get in touch with our technical support team at http://bit.ly/Phone_Support for further assistance.
    Thanks!
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • I am trying to print a fillable form.  It will not print and I get two error messages "document could not be printed" and "there were no pages selected to print."  Th latter is not true.  Won't print all, the page I am on, nor any series of pages inserted

    I am trying to print a fillable form - - an application for a Chinese visa.  It will not print and I get two error messages:  "document could not be printed" and   "there were no pages selected to print."  The latter is not true.  Won't print at all, the page I am on, nor any series of pages inserted.
    Am using a MAC desktop and a Cannon PIXMA MX922 printer.
    I need to print this form now that it is filled out?  What can I do? 

    Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
    EDIT: I found it and did, but still not working.

  • I cant print and get this message, "adobe elements, "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing."

    I keep getting this message when trying to print in adobe elements, I am using a new Epson WF-3640 printer
    "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing.

    Hi,
    If you are working in PSE13, please update it to latest PSE13.1 update available and see if it helps.
    To apply update, you can go to Help > Updates and there you can see PSE13.1 update.
    Thanks,
    Anwesha

  • Will not boot - Black screen A2 code on bottom right.

    mobo:Z97S SLI KRAIT EDITION
    Samsung SSD - Windows and games are installed here
    WD HDD - Everything else is put on this one.
    Windows 7
    I installed an ISO mounting program called Gizmo Central onto my HDD
    After installation it said that it needed to restart. After it restarted I got a black screen with an A2 code. The screen will go completely black, and then it will back to the screen with the A2 code in the bottom right. It won't boot up BIOS, unless I do 1 of 2 things:
    1. power off the pc, unplug the sata cable from the HDD, power pc back on, bios and windows will boot up. I can then turn the pc off, plug the sata cable back into the HDD, and it boots up fine into windows, but if I reboot again, it goes back to that black screen with the A2.
    2. I have put in a disc into the dvd drive, and I do not get that screen. (I've been doing this as a workaround since it's much easier)
    I have tried a number of things to resolve this, but none of them have restored my computer to it's perfect working order that it was previous to installing this program.
    When I tried to uninstall that program it wasn't even on my installed programs list, so I deleted the folder it was in. This didn't resolve the issue.
    I have wiped everything off of my HDD drive. This did not resolve the issue.
    I have triple checked that my SSD is the first in the boot order. I even disabled the HDD from the HD boot order entirely. No change...
    I updated my motherboard drivers. No change.
    It's almost like for whatever reason my BIOS isn't listening to the boot order and doing my DVD drive, HDD, and then the SSD ever since I installed that Gizmo ISO mounting program.
    I set the BIOS to factory default settings. That did not fix this issue.
    I have use a windows system restore point from 2 days ago when it was working flawlessly. No change.
    I'm thinking about reinstalling Windows, but logically it doesn't make sense to do that since the error happens even if I power off/on from BIOS with the HDD plugged in, so it I'm willing to venture that it's not Windows at fault here.
    Also the computer used to boot up in like 8 seconds. It's still fast to boot up, but ever since this started to happen, it takes like 15-30 seconds for my usb mouse, and usb keyboard to register after windows starts up. It use to be immediate. My computer is so messed up right now, and I don't even know how it got like this or how to fix it. I'm pretty savvy and can follow directions well, so any help would be greatly appreciated.

    Quote from: JLio01 on 29-April-15, 06:56:47
    What intel USB driver version do you use? There's one more thing to try, try plug the kb/ms to USB 3.0 ports except the ones under the LAN port, and check if it happens again.
    I'm glad you recommended checking Intel drivers. I typed appwiz.cpl to go to the installed programs list in windows. Found "intel USB 3.0 extensible host controller". I tried uninstalling this. It made my mouse and keyboard not work for about 1 minutes. Windows downloaded some drivers for my devices, and asked to reboot. I rebooted. Mouse/keyboard responded right away! Just incase it was a fluke I rebooted another 2 times, and each time the mouse and keyboard are immediately responsive. I'm SO glad that my PC is back to it's original working order. Thank you to you all for taking time out of your day to help me. I really appreciate it!

  • Canon MP210 just will not show up in Add Printer

    Trying to help a friend get new (to her) printer added in OS 10.5.8... There isn't even a network involved, just trying to add it as simple USB.
    It's a Canon Pixma MP210 and wasn't in the printer descrips, so i downloaded and installed the most recent driver for it from Canon, which is noted as good for 10.5 etc (and is CUPs to boot).
    its Installer runs just fine... but printer still does not show up in Add Printer, despite restarts, printer attached, not attached, whatever. printer is not in list, "Print Using..." shows no options, and "Add" is greyed out.
    The printer itself was never used by its former owner, it's like new, so it's not likely broken.
    i attempted to repair permissions, and ran into no-go there too. It sticks on acquiring the database, doesn't even get to a progress bar (let it run for almost an hour, no change). Same thing when i start it up/run repair permissions from retail OS 10.5 DVD.
    And this on a smallish (60GB) hard drive that has barely anything on it ....she mostly just websurfs and emails. Tho the finder is a bit slow, there doesn't appear to be anything wrong with the mac (it's an iBook G4) and it passes disk first aid fine.
    Suggestions?

    lisajoy wrote:
    Any idea why Permissions Repair doesn't progress, neither from hard disk nor from DVD? From other posts i've researched here, repaired permissions apparently allowed some canon printers to show themselves.
    If Repair Permissions is not completing then something would be amiss with the OS. But I've never a repair permissions resolve a printer not appearing in the Default browser view. It could certainly fix an issue with the printer being seen but the driver not being found. But for the printer not to be visible in the Default view when it is connected to the Mac via USB, then I don't believe a permissions repair will resolve this - especially also if the printer is not visible in System Profiler. Personally I found a reset of the printing system rather than a repair disk permissions to be more helpful.

  • My photosmart C 4750 will not accept glossy paper for printing pictures.

    My photosmart C 4750 will not accept glossy paper for printing pictures.
    Vista OS 32 bit.
    Paper jams completely with either single or multiple sheets.
    No changes to the system. Plain paper feed just fine.
    Thanks

    Hi antonaki,
    Did your printer accept glossy paper before and just stopped working with it ?
    What kind of glossy paper are you using and what is the weight ?
    Here is the product specs for your printer and a list of the types and weights of paper you can use.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Subcircuit pins do not align with grid and will not connect

    I have two identical subcircuit symbols.  One is just fine, but the other has pins that do not align with the MS grid, and one that will not even connect.  MS12.0.0.
    This one is fine:
    This one pins are off grid.  The circled one will not connect.
    Solved!
    Go to Solution.

    Hi,
    I have been experimenting a bit with this. One thing you can try is open the Symbol Editor, select the pin which is not connecting and then from the spreadsheet view, change the Shape to Zero-length Pin. Then try to see if you can connect the pin in the design. It will not appear as a line but you should still be able to connect to it.
    If this does not work, you can open a service request and we can try to see how to resolve the issue.
    Hope this helps.
    Regards,
    Tayyab R,
    National Instruments.

  • My ipod has just black screen and the home button is not working. what will i do? help please!

    my ipod has just black screen and the home button is not working. what will i do? help please!

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPodin recovery mode use this prgram.
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have mac book pro and recently changed to Lion.  since then it will not recognise my epson r2880 printer telling me it is not connected when it plainly is with usb connection?

    I have mac book pro and recently changed to Lion.  since then it will not recognise my epson r2880 printer telling me it is not connected when it plainly is with usb connection?

    Turn off your printer.
    Go to System Preferences > Print & Scan > Printers window and delete the printer from the list, then add it back.
    Turn on your printer.
    Any difference?
    Here are some more tips from Apple Support article.

  • I cancelled my iOS6 update in the middle of updating. now it will not turn on it will either remain black or white on the screen. What do i Do?

    I cancelled my iOS6 update in the middle of updating. now it will not turn on it will either remain black or white on the screen. What do i Do? PLEASE HELP!!

    Connect it to iTunes and then put the device in DFU mode by holding the power button and home button for 10 seconds, then release the power button only while still holing the home button.
    iTunes will prompt you to restore, try that and it should work.
    ~Lt. Leviathan

Maybe you are looking for