L8 is seeing my Axiom as a Logic Control and it's wreaking havoc!

A new twist on all the control surface issues - I have a M-Audio Axiom 25 connected via USB and it's not setup in anyway as a control surface via the control surfaces preferences. I have never used it as such and never need to because I own a Logic Control.
All of the sudden, L8 is recognizing midi note input from the M-Audio as LC input - i.e. if I press an A3 it doesn't sound a midi note, but rather performs a specific Logic Control function as defined in the Key Command Preferences.
Of course, it's even worse because I have an Apogee Ensemble so Logic doesn't even recognize a potential Control Surface unless everything is powered up in just such a perfect way.
So I have a Logic Control that isn't recognized, and an Axiom 25 that is recognized as something it's not and if I go to Control Surfaces preferences, it's as if the world of cotrollers doesn't even exist because the master list of options is gone baby gone.
Anyone find a workaround for this?

totally different ports!
The LC is connected via my AMT8 - the Axiom is on it's own port via USB, so that shouldn't be issue.
I've tried cabling the Axiom port directly from the input object to a monitor and then terminating the connection just so I can see what it's transmitting - the "bad" notes don't show up as anything in the monitor and even though I've broken the Sum cable from the input object and the Axiom port is only cabled to a monitor and nothing else (the Sequencer input is not connected to anything at all!), L8 is receiving those key presses as LC commands.
So strange

Similar Messages

In Answers am seeing "Folder is Empty" for Logical Fact and Dimension Table

Hi All,
Am working on OBIEE Answers, on of sudden when i clicked on Logical Fact table it showed me as "folder is empty". I restarted all the services and then tried still showing same for Logical Fact and Dimension tables but am able to see all my reports in Shared Folders. I restarted the machine too but no change. Please help me out to resolve this issue.
Thanks in Advance.
Regards,
Rajkumar.

First of all, follow the forum etiquette :
http://forums.oracle.com/forums/ann.jspa?annID=939
React or mark as anwser the post that the user gave.
And for your question, you must check the log for a possible corrupt catalog :
OracleBIData_Home\web\log\sawlog0.log

Logic Control and LP8

Hi,
I'm surprised at the lack of outrage over the terrible state of the Logic Control unit implementation in Logic Pro . With earlier versions of Logic I found using the LC unit a delight, recording and mixing several projects with it. Now (8.0.1) it's simply not worth using. I've tried all I know . . . rebuild defaults, trash preferences, re-install the unit, build a new autoload template (even Logic's templates don't work any better in this respect). Global mode doesn't work and track selection is a problem in any mode. One exception: if you're content with using the up/down arrows on the LC for track selection it works better . . . even in Global mode . . . it will actually put a track into Record and not mention the dreaded "Automation Folder"! Apple has stated that the unit is "behaving as expected". Mackie advised me to check for double .cs preference files(there weren't). Nobody said "Oh yeah . . . it's a problem". Either the issue isn't as widespread as I imagine or the relevant companies are not aware of the problem. This unit wasn't cheap. I paid $1764.00 Canadian when I bought it. It was worth every penny at the time, but now it looks more like a non-usable piece of metal that cost over three times more than the software (LP8) that appears to be crippling it.
What gives?
RW

Yep, I'm amazed at how broken it is in LP8, both major and minor issues. It's like nobody tested the MCU when they'd reworking the GUI and other stuff for LP8.
I've certainly reported this as a bug, so it's not like they aren't aware of it. I really hope they are tackling all this stuff (as well as all the other stuff) for an update soon...

Logic Control and Logic Pro 9.1.0

I'm running Logic Pro 9.1.1 and Logic Control V1.02 which makes it mackie control.
Today i set it up with Logic and noticed a few things:
1. The level reading on the Logic Control's display is choppy...meaning if i raise a fader really slowly the display levels also rise slowly synced with on the onscreen faders. However if i move the faders a bit faster, the Logic Control display reading is very choppy--it always settles at the right level, but the changes are jumpy. Is this usual ? This was not the case with Logic 7.
2. A few times the locator bar jumped forward missing beats, as if stop/play were pressed repeatedly. I rebuilt defaults and now it seems to be working fine, This used to happen to me in Logic Pro 7 as well, maybe its a fault with my controller. Anyone ever experience this ?
Thanks
Faisal

Cowbell, my experience has been different.
I tried the Logic Control mode but things were really wierd, some buttons not working, then the whole control lost contact with logic till i re-launched.
The Scroll bar jumping thing was happening a lot more often.
Then i deleted LC, trashed preferences and re-booted in Mackie Control mode.
Still strangeness and i went did the check TOUCHLESS FADER thing and all is working fine now which is WEIRD!!!!!! I think i may have a defect in the jog wheel/transport section but its all working fine for now.
I'll give it a few days.
Thanks !!

Keystation Pro 88 (or other controller) as the Logic Control

Has anybody got their setup like this? I've been trying to get this to work for the past 6 hours and no luck. Can someone please help me? Just bought Studio 2 days ago and haven't touched it yet cuz I can't get the keyboard to fully work.
Joined: 17 Jan 2006
Posts: 55
Location: Los Angeles
Posted: Sun Jul 15, 2007 12:03 am Post subject: Keystation Pro 88 (or other controller) as the Logic Control
I'm sure some of you already know how to do this. I just figured I'd write this up at some point to share with others. The basic idea is to use the Keystaion Pro 88 (or some other MIDI Controller) as an actual Control Surface, or in this case the Logic Control, to have more freedom with the MIDI Controller, i.e. using the group of 8 faders (on the Keystation) to control Volume for tracks 1-8 in the arrange window, and then hitting Bank Right to automatically control tracks 9-16, and as a result making a universal controller not bound by specific channel messages, or MIDI CC Volume messages etc... in short the essence of any Control Surface.
What I'm describing below is what this app will also do: http://www.opuslocus.com/lcxmu/index.php
I basically just wanted to avoid using a separate application all together. Keep in mind that the app does simplify the whole process, but Logic inherently can do pretty much everything the app does.
I recommend reading this in its entirety before attempting.
KeyStation Pro 88 as Logic Control
Part One: Add Logic Control as Control Surface
1. Open Logic.
2. Preferences / Control Surfaces / Setup...
3. New / Install / Select your preferred device (in my case Logic Control
4. Click the icon in the setup window for the Logic Control.
5. On the left hand side under "Logic Control" you should see an "Out Port:" and "Input:" ... select the desired MIDI in/out through which your device is connected.
6. Open Preferences / Control Surfaces / Controller Assignments. Make sure you select the "EXPERT VIEW" check box.
7. You should now see a bunch of different Zones in the Zone column, one of which is "Control Surface: Logic Control"
8. Create your own Zone, KeyStation Pro 88 (or whatever) using the Plus sign in the bottom left corner of the Controller Assignments window.
9. Now basically go through the existing parameters already available in the Logic Control Zones, Select what you want. You can select entire Modes or individual Controls / Parameters. You can select multiple values (only multiple Control / Parameters NOT modes) by selecting and dragging or simply with select and holding command.
10. Command-C the selected Modes and then click back onto you user zone that you created above.
11. Click inside the Mode column (or Control / Parameter column depending upon what you selected and copied from the Logic Control zones).
12. Command-V to paste the Modes into your user Zone.
13. Do this for as many Modes / Controls you want, that your specific MIDI controller interface will be able to handle.
Part Two: Assigning Input Values
1. Open Preferences / Control Surfaces / Controller Assignments
2. Now for each parameter that you copied, you will need to set the input MIDI value from your controller.
3. Click on your User Zone, then Mode, then the first parameter in the 3rd column.
4. You should see a "MIDI Input" option (this should already be set correctly as long as you set it earlier in Step 5 of Part One). If it's not set to the correct MIDI input (which I found to be the case sometimes even after Step 5), then change that here.
5. Next to "Value Change:" you will see a box with MIDI data in it. Delete the existing date by highlight and delete.
6. Activate "Learn Mode" (bottom right corner of Controller Assignments window) then click within the "Value Change" box, then move the corresponding fader, button etc. The "Value Change" should now show the MIDI data value for that fader. Be careful here, there should only be 3 groups of 2 for data here... if you see 2 groups, of 3 groups, of 2 then typically the FIRST group of 3 should be the value you want here. You can always delete the data, and move the fader again to be sure. The reason for the 2 groups of 3 is not in error: some buttons send TWO MIDI values, one on press and one on release. You can use this to your advantage and assign TWO different functions to these buttons, thus the first (press hold) value can do one thing and the second (release) value can do another. You can also change the MIDI controller to only send 1 message on press and nothing on release, or simply make sure that only the on value is present in the "Value Change" box.
7. You'll have to do this for all the different knobs / faders etc. on your MIDI controller. There are many shortcuts of course. You can manually type in the Values if you know them. For the Keystation Pro, M-Audio has an app called Enigma that I recommend for changing controller parameters and much more on the Keystation. You can use this app to assign all the actual control data that each button or fader sends to the sequencer, once you know the values you can convert that data to the MIDI data values and enter them into the Value Change box.
8. Once you're done assigning values to the controllers, you can delete all the Zones except for the user Zone you created earlier. Before you do this, it's a good idea to back up the Control Surface preference file just in case you ever want to grab something else from the Logic Control Zones. You could always add a second Logic Control and copy the Zone from that, but you'd have to reassign all the MIDI Input: values ... short version, just back up the preference file before you delete the Zones. The reason why you want to delete the Zones that you're not using is simply because if you have a controller that happens to send out MIDI data to the sequencer, and the actual Logic Control happens to have that MIDI data value already inherent it it's Zones, then you could be asking for trouble, simply put you'd be sending MIDI data to change Volume and the Logic Control maybe has that MIDI Data Value already assigned to Pan for the existing track.
The file to backup is located here: ~Users/username/Library/Preferences/Logic/com.apple.logic.pro.cs
As a precaution I have always backed up my Logic Preference file WITH this .cs file. Technically it's not necessary... for instance: Let's say you trash your preferences and open Logic to find that the Logic Control is missing from the Control Surfaces Setup. So you add it back and now you find out that Logic is missing the User Zone that you created. If you close Logic and copy the .cs file back to the directory above, then upon reopening Logic you should find your User Zone is in place again. But I've had mixed results with that, so just in case I copy over the preference file with the .cs file as a pair. It seems that the Logic pref file only contains information that the Logic Control is a Control Surface on your system and the .cs file is the preferences for that specific Surface.
Another note: after a recent Logic update, maybe 7.2? ... it was whichever update added support for more Control Surfaces, I can't remember. This update basically erased all the hours of hard work linking the Keystation to Logic as the Logic Control. This only happened with this specific Control Surface update, but not with 7.2.3, probably simply because they didn't make any changes to the .cs pref file.
Anyhow, when this happens again in the future, there seems to be a quick fix. I take NO responsibility for you somehow crashing Logic on a continual basis after applying the fix. Personally I have seen NO issues by doing this at all. I simply copied a version of the .cs file with the new update missing the Keystation Zone, as well as a version of the .cs file WITH the Keystation Zone, to a PC (I think it was a PC, don't believe I tried it with textedit, although should work as well). I opened both of the files in notepad and compared them. I noticed the word Keystation towards the bottom and realized that most all the data (gibberish) was exactly the same up until a point in which the file with the Keystation data had a group that was absent from the new .cs pref file from the new update. So I basically copied the data from the old .cs pref file, pasted it into the new .cs pref file, saved it and open Logic. Logic warned me that a pref file was corrupt or something of that nature, but loaded fine anyway, and the Keystation Zone was back in Controller Assignments.
One last thing... the problem that some of you may run into is that by making your MIDI controller a Control Surface, or turning your Keystation Pro into a Logic Control, limits some of the functionality of the MIDI Controller. For instance, a Logic Control's main purpose is to control different faders, knobs and what not of MANY different tracks. When you move a fader for volume on the Logic control, it will move the fader corresponding to the selected track... it's not programed to say change the actual midi CC 7 for Volume, only the actual Fader. Thus, what if you want the MOD wheel to still control modulation and you want the sustatin pedal to continue to act as a sustain pedal. Well, if Logic sees that Port 1 is the input for the Logic Control, but in reality the Keystation, then it's only going to allow specific events through. The way around this issue is by using both the input options that the Keystation has... hook the MIDI out into Logic and use the USB port as well. I run the Keystation as a Logic Control through the USB port, and use the MIDI out for actual MIDI data. But the catch is you have to make sure you only connect the MIDI Port into Logic's sequencer in the environment. Thus open the environment, open Clicks & Ports, Port 1 and Port 2 are the IN/OUT for the USB port. Midi Port is the Keystation's MIDI port. Select and delete the cable for the SUM, and run individual cables for the ports you want to use. Thus, all your other MIDI interface Ports, the Caps Lock keyboard etc. Just be sure that if your using Port 1 (USB Port Out from Keystation) for the fake Logic Control, that it DOES NOT cable into the "Input View" or "to Recording & Thru". This creates yet another issue:
The controls on the Keystation have to send SOME form of MIDI control message / data to Logic. Well if the faders on the Keystation are preset to send Ch1-9, Volume 0-127 messages, then when you move a fader on the Keystation (as the Logic Control) since the Keystation is still reaching the sequencer from the MIDI port, you will be sending MIDI values that can effect your current track possibly when you don't want to. The work around for this is to be sure that all the faders / knobs that you want to use as your fake Logic Control are sending useless MIDI data... i.e. CC 75, 76, 77, and so on. This way moving faders won't effect playback, although you could still in theory record this MIDI data into your sequencer. You could however filter this events from entering the sequencer input with a transformer since you know precisely what MIDI CC values you are changing. The easy way to assign these values is to use the program Enigma from M-Audio that I mentioned above.
More discussion specifically related to the Keystation Pro 88:
You can do a lot using the Controller Assignments and different Zones from the Logic Control. For instance, the real Logic Control has Solo, Mute, and Record buttons for the 8 faders. The Keystation Pro only has 1 button underneath each fader. But you could use one of the other buttons to toggle Solo, Mute, and Record mode so that depending on which mode your in, the buttons underneath each fader will correspond to Mute or Solo etc. By the way, a good setup from my experience is to use the first 8 faders of the Keystation as the track faders, and the final 9th fader for Master Volume. You can then set two of the buttons underneath the Knobs as Bank Left and Bank Right buttons to change the 8 fader tracks to correspond to the onscreen track groups of 8. Also don't forget that you can assign TWO functions to EACH button, since a button press can send a value of 127 and a button release can send a 00 value. So if you press and hold a button it can activate "Shift-select Mode" and until released it can make the buttons under the faders act as Volume to Zero resets or whatever you want. When you release the button it will go back to just Mute mode or Solo mode. The Controller Assignments window has MANY options, and parameters some of which are very confusing and take a lot of trial and error to understand... the manual helps a little but of course isn't perfect.

I'm thinking about buying a Keystation Pro 88 (2nd hand) so I was googling around and found this:
http://www.soundonsound.com/sos/Oct04/articles/keystation.htm
[quote]
I had some trouble getting the transport controls to work with Emagic's Logic, even when I loaded the 'Pro 88 Logic Preset.LSO' file on the supplied CD-ROM into Logic. I contacted the guys who designed and set up the Keystation here in the UK at the old Evolution offices, and between us we managed to work out what was going wrong. First of all, you need to enter the appropriate MIDI key commands in Logic's user preferences. These cannot be updated with an LSO file, so the commands have to be entered using the Learn Key function in Logic (see the screenshot below for the list we used). Then we discovered that the transport keys were toggling, which meant that only each second press of each key was actually working. It turned out that I had an early version of the Logic preset before this had been fixed, but the more recent one has been put on the M Audio web site for anyone else that needs it. It took about 30 seconds to change the output commands so that the buttons were no longer toggling.[/quote]
Did you get it to work correctly eventually?

Logic Control - XT display not resonding, noise coming thru midi....

I have a Logic Control and a Logic Control XT. XT on left, channels 1-8. Display on XT lights up, but doesn't recognize tracks (faders and other controls, do however).
"Midi in" on XT causes noise in my monitors (don't tell me it's impossible because midi sends 0 or 1 -- it IS causing interference in my monitors). Can bad midi cables or a bad midi interface cause noise?
Is my set up somehow incorrect?

I have a Logic Control and a Logic Control XT. XT on
left, channels 1-8. Display on XT lights up, but
doesn't recognize tracks (faders and other controls,
do however).
So everything works, but you get nothing on the display? When you power it up, do words come up on the display then (like a "Logic Control XT" welcome message?)
If not, perhaps the display has died?
"Midi in" on XT causes noise in my monitors (don't
tell me it's impossible because midi sends 0 or 1 --
it IS causing interference in my monitors). Can bad
midi cables or a bad midi interface cause noise?
You might have some kind of ground loop issue, which seems unlikely seeing as MIDI cables don't have a direct electrical connection.
It may be that your computer causes interference when sending MIDI (nothing to do with the Logic Control). Early motherboards, for instance, gave audio problems when using USB MIDI - I had an old motherboard which gave clicks in the audio drivers when sending MIDI via USB, which is why I used the serial bus MIDI instead, and that solved the problem.
Is my set up somehow incorrect?
Difficult to tell from just the info you provide!

Updating logic control problem

Hi. Hope somebody can help. I just bought a used Logic Control and I'm trying to update it to Mackie Control functionality. I have the update but the instructions are a bit confusing I have imported the MIDI file into Logic but then I am told to "Disable the Mackie Control/Logic Control as a midi controller". I don't know what this means. I have tried removing it from the control surfaces setup but no luck. When I play the midi file I get nothing. The logic control stays in "Waiting for MIDI upgrade" mode but no update. Help!

I am told to "Disable the Mackie Control/Logic Control as a midi
controller". I don't know what this means. I have tried removing
it from the control surfaces setup but no luck
From the instructions you state, that's what I'd infer from them.
When I play the midi file I get nothing. The logic control stays
in "Waiting for MIDI upgrade" mode but no update.
Where are you playing to MIDI file to? You sure you're playing it to the MIDI port that the LC is on, and that your interface isn't filtering sysex data?

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

2x iMac G5: Both Logic Board and Display Problems, Warrenty?

Hello,
Thank you for looking at this topic.
I am Jeroen from The Netherlands and proud owner of several Mac Mini's, iMac's and Macbook's. I have 2times the iMac G5, a beautiful machine, but both not working since 2 months.
I have two times the iMac G5 with iSight, both have logic board and display problems.
The first iMac doenst start at all, black screen, i hear the chime, but nothing happening. After a minute i see one horizantal white stripe but nothing happens.
The second iMac has weird horizantal stripes also, but the computer starts. It gives a finder and questionmark icon. After a while the fans go crazy.
Both these symptons are widely known on the internet. I would like to get this fixed, but prices are crazy. And because this is a common issue I would expect to get this fixed for no costs. I have contacted several Apple resellers but they shown me high prices and bad services. On these forums I've saw people in the USA who get this fixed free of charge.
Does anyone has any advice for me? I'll call apple USA this morning.
Thankyou for ur time.

Welcome to Apple Discussions.
I know of no repair extension authorization which provides for the repair of either computer you describe beyond its original 12 month period of coverage. If either machine is covered by a warranty extension program provided by AppleCare, then the parts, labor or both required to replace the defective components may be offered at no charge to you. Final determination of eligibility is made at the part level by authorized Apple service providers or dealers and by the specific serial number of the machine submitted for service.
Absent a warranty extension, however, it is quite likely that you will have to pay for the repairs is you elect to have them performed.

LSMW - source file from Logical Path and Files?

Hi,
When specifing the source file (legacy data) you want to use to load from - you can choose a file from the application server.
For the application server file does anyone know is there anyway that you can use a logical path and file to represent this source file?
I do not see this option in LSMW and am surprised at this as it necessitates changing the LSMW in each target system.
Thanks in advance.
Kind regards,
Mark

Hi,
When specifing the source file (legacy data) you want to use to load from - you can choose a file from the application server.
For the application server file does anyone know is there anyway that you can use a logical path and file to represent this source file?
I do not see this option in LSMW and am surprised at this as it necessitates changing the LSMW in each target system.
Thanks in advance.
Kind regards,
Mark

Removing Logical Networks and Subnets from Hyper-V Host Network Adapters that are greyed out

Hello All
I am new to SCVMM 2012 R2 and I have create a Hyper-V Cluster and now creating Logical Networks and Port Profiles and Logical Switches. I have figured out how to create all of them properly now, but I have made some mistakes in the past. I have a Logical
Switch created and assigned to network adapters on the hosts. Now I am trying to add the other switches to other adapters, but I have associations on network adapters to Logical Switches and Subnets that are not correct and need to be removed so I can add
the correct ones, but in the console the network adapters that I need to work with the information is grayed out and I can't change the information.
I am not an expert at Powershell. Below you can see a Logical Network and Sunets associated
to a Network adapter. Can someone help figure out how to remove the information so I can assign the correct Logical Network?
I woul so much appreciate this. I know there is a way to do this in
PowerShell but I don't know Powershell that much. I
am savoing all the
powershell scripts ever time I configure something in SCVMM but I have had no luck trying to
revearse what I did.
Help Please
Christopher
Christopher Scannell

This shows that an Uplink profile associated with this host, links to these logical networks. In order to remove this successfully, you must remove the logical switch and uplink deployed to the hosts.
For a complete overview and guidance on the required configuration, have a look at the whitepaper we created.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How to Configure logical path and how to retrieve physical path for an IDOC

Hi ,
I want to configure logical path for an IDOC,
and then I need to retrieve Physical path from this logical path
using a FM (eg. FILE_GET_NAME).
How to configure the logical path for an idoc ?
Regards ,
Harshit Rungta

Using Logical Files in ABAP Programs
To create a physical file name from a logical file name in your ABAP programs, use the function module FILE_GET_NAME. To insert the function module call in your program, choose Edit ® Insert statement from the ABAP Editor screen. A dialog box appears. Select Call Function and enter FILE_GET_NAME. The parameters of this function module are listed below.
Import parameters
Parameters
Function
CLIENT
The maintenance tables for the logical files and paths are client-dependent. Therefore, the desired client can be imported. The current client is stored in the system field SY-MANDT.
LOGICAL_FILENAME
Enter the logical file name in upper case letters that you want to convert.
OPERATING_SYSTEM
You can import any operating system that is contained in the list in Transaction SF04 (see Assigning Operating Systems to Syntax Groups). The physical file name will be created according to the syntax group to which the operating system is linked. The default parameter is the value of the system field
SY-OPSYS.
PARAMETER_1
PARAMETER_2
If you specify these import parameters, the reserved words in the physical path names will be replaced by the imported values.
USE_PRESENTATION
_SERVER
With this flag you can decide whether to import the operating system of the presentation server instead of the operating system imported by the parameter OPERATING_SYSTEM.
WITH_FILE_EXTENSION
If you set this flag unequal to SPACE, the file format defined for the logical file name is appended to the physical file name.
Export Parameters
Parameters
Function
EMERGENCY_FLAG
If this parameter is unequal to SPACE, no physical name is defined in the logical path. An emergency physical name was created from table FILENAME and profile parameter DIR_GLOBAL.
FILE_FORMAT
This parameter is the file format defined for the logical file name. You can use this parameter, for example, to decide in which mode the file should be opened.
FILE_NAME
This parameter is the physical file name that you can use with the ABAP statements for working with files.
Exception Parameters
Parameters
Function
FILE_NOT_FOUND
This exception is raised if the logical file is not defined.
OTHERS
This exception is raised if other errors occur.
Suppose the logical file MYTEMP and the logical path TMP_SUB are defined as in the preceding topics and we have the following program:
DATA: FLAG,
      FORMAT(3),
      FNAME(60).
WRITE SY-OPSYS.
CALL FUNCTION 'FILE_GET_NAME'
     EXPORTING
          LOGICAL_FILENAME        = 'MYTEMP'
          OPERATING_SYSTEM        = SY-OPSYS
          PARAMETER_1             = '01'
     IMPORTING
          EMERGENCY_FLAG          = FLAG
          FILE_FORMAT             = FORMAT
          FILE_NAME               = FNAME
     EXCEPTIONS
          FILE_NOT_FOUND          = 1
          OTHERS                  = 2.
IF SY-SUBRC = 0.
WRITE: / 'Flag      :', FLAG,
         / 'Format    :', FORMAT,
         / 'Phys. Name:', FNAME.
ENDIF.
The output appears as follows:
HP-UX
FLAG :
FORMAT : BIN
Phys. Name: /tmp/TEST01
In this example, the R/3 System is running under the operating system HP-UX, which is member of the syntax group UNIX. The logical file name MYTEMP with the logical path TMP_SUB is converted into a physical file name /tmp/TEST01 as defined for the syntax group UNIX. The field FNAME can be used in the further flow of the program to work with file TEST01 in directory /tmp.
Suppose we have a logical file name EMPTY with the physical file name TEST, connected to a logical path that has no specification of a physical path. If you replace the EXPORTING parameter 'MYTEMP' with 'EMPTY' in the above example, the output appears as follows:
HP-UX
FLAG : X
FORMAT :
Phys. Name: /usr/sap/S11/SYS/global/TEST
The system created an emergency file name, whose path depends on the installation of the current R/3 System.

Creating Logical Networks and Switches via SPF

Hi,
Is it possible to create Logical switches and logical networks in VMM by calling SPF REST APIs. I can see only a GET API for logical networks and none for Logical switches. If they exist can someone point me to a link to the documentation?
Thanks,
Venky

Hi
You can only get logical network information -
http://msdn.microsoft.com/en-us/library/dn470018.aspx
The purpose of SPF is to be used as web service for Tenants. As logical networks and switches are objects that are maintained by administrators they cannot be managed by SPF. Logical networks have get operation because you might want to create VLAN-based
VM Networks depending on what is configured in Logical networks. For administrating logical switches and networks administrators will use PowerShell or the VMM console.

"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.

"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.
I recently formatted my computer. In other words, I'm not using too much memory of my HD. My Memory Ram is 8GB.

dandotcraig wrote:
A week before logic X comes out it starts bugging out... i deleted a bunch of stuff on my HD and cleaned up everything... didnt fix anything... then logic x came out and I though oh i better update that will fix everything... and im still having the same problems... its rediculous.
Umm,, no offence... but what is ridiculous... is you didn't troubleshoot the original problem but instead you assumed it was a LP9 problem so you updated to LPX which is still in its early days and is likely to be less stable than LP9... rather than more so!
So.. Here's the thing....
LP9 was working fine and then stopped working normally according to you. Therefore what changed at the time LP9 stopped working normally?
Here are just a few ideas to think about.. for around the time this started..
Did you update Logic Pro 9... OS X... Drivers for Midi/Audio or other connected devices?
If you did, did you then restore from a backup you made prior to these problems occuring and what happened when you did so? (assuming you do make backups of your system?)
Did you install any new Apps on your Mac?
Did you add a new Hard Drive? How is it formatted?
Did you start recording or creating music in a different way to how you used to before the problem started?
Have you started using a different SI or FX plugin or plugins.. More or different FX for example.. Did you install a new version of a plugin?
Is all your software legal? (Have to ask because some people install all kinds of illegal plugins and whatever else.. and have no idea how the 'cracks' work or what they might affect/mess up/conflict with in the process)
Have you looked at the System logs to see if anything is happening out of the ordinary when you get these messages?
Have you looked at OS X's Activity monitor to see if any app or routine is kicking in hard when you get this issue?
Basically, you need to think about and look for what changed... because something apparently changed to suddenly cause these issues...given you said you didn't have them until a certain timeframe and some of the questions above, I hope, will get you thinking..
....and maybe a few of the others here will come up with other ideas and suggestions to help you...
Good luck and let us know how you got on...

How to use Fuzzy Logic Controller for transfer function in labview control and simulation loop?

I am facing problem with fuzzy PD logic controller for transfer function in control and simulation loop.
Plz Help me in this regard...................
i have attache snapshot of my program
Attachments:
fuzzy in simulation loop.JPG ‏52 KB

Hi Sankhadip,
Sorry for the late response. I was looking at your code and
I noticed that the graph scale does not start from zero. That might be the
reason why you don't see the transient in the simulation. To change the scales
simply double click on the lower limit and set it to zero. If this is not the
expected results, can you please post the expected results, so we can see what are the
differences between the results . Also, you might be using different
solvers, and that gives different results as well.
Thanks and have a great day.
Esmail Hamdan | Applications Engineering | National
Instruments

L8 is seeing my Axiom as a Logic Control and it's wreaking havoc!

Similar Messages

Maybe you are looking for