LA Theaters for Screening Indie Movie
Hi,
I know this is not an FCP question, but I assume that those working in post might have info related to this question:
I'm looking for a theater in Los Angeles that will screen my 90 minute movie for an indie rate. Do any of you have experience with this and have recommendations? If there's a special rate for film students I would appreciate it.
Thanks,
Alexander
My experience is limited to friends who have used the Westwood Crest and Laemmle's Music Hall 3 theater on Wilshire.
I never asked what their deals were.
Perhaps the Egyptian, Aero or Nuart also?
Similar Messages
-
Export for screening in movie theatre
The question:
How do I better compress my footage (QT file) to view on a movie theatre screen (for a film festival) where the action doesn't motion blur?
Specs:
The film was shot as on P2 cards as 1080i24, imported as 1080p30, edited in a timeline of 1080i60, and compressed to DVCPRO-NTSC (720x480 Letterbox) - I remember the final being compressed as "interlaced".
We submitted this QT file, which they requested, and it showed no problems being viewed on any computer, but when projected onto the big screen you could painfully notice choppy movement.
I'm guessing it begins with the initial odd filming choice (1080i24 - NOT 24N or true progressive).
What do you think? Would something simple like choosing "progressive" during final output have been better?
Thank you, ahead of time!LOLOL Aw, Shane, it was a mess! I'm very surprised it looks alright, though, aside from the theater screening. Never again...
This was for a 48 Hour Film competition, and after successful tests w/ 720p footage earlier in the week to get work flow down, someone on set suddenly decided to switch things up at the last second and go with 1080i24 which I wasn't told about until I started importing footage.... Why?! Your guess is as good as mine.
Let's see if I remember this correctly: upon importing, I found out that FCP doesn't have the exact codec (through Easy Setup) to import this footage as it was shot - this is probably where I'm going awry in my description to you, because while Easy Setup DOES has 1080i60 the exact way it was filmed is not a function of FCP. I found numerous pages of advice all telling me to import this footage at 1080p30, which I did - this could be another thing I can't exactly remember since I'm only looking at the footage description in FCP right now. Upon making a new timeline the footage wouldn't match up correctly (w/ out heavy rendering) so I had to click off the box which asked if I wanted to convert the timeline to the video - "no". The footage worked/edited perfectly fine in a DVCPRO HD 1080i60 timeline. Seemed to make sense since finding out the "24p" was not true progressive (didn't film in 24pA).
Since my FCP must have a kink, I followed folks' good advice from the boards and compressed to SD Letterbox by first making a self-contained QT file, and then exporting directly from QT w/ DV/DVCPRO - NTSC, Best quality, Interlaced, 4:3 scaled w/ Letterbox.
Whaddya think? Still shocking, yes, but more confusing? Any way to make it look better on the big screen? -
Publish a Captivate project for screen in movie theater
Hi,
I was asked to develop a software demo animation (approximately 3min) that will eventually be viewed on a big screen in a movie theater.
Of course the aim is to have a perfect image quality as possible.
Is Captivate a good medium to create such a project?
The output I would like to use is an .mp4 video format. But are there any important settings I should activate with that output?
I have already noticed that the maximum Captivate project size is 1280x720. When I go beyond that, it all goes wrong.
What should be the screenshot resolution and the dpi value to use so that the image quality of the screenshots when viewed on the movie screen is flawless?
Thanx!Hi,
You can publish to either as .mp4 (Go to publish >Media >Mp4 ) or .swf from Captivate 7. In presenter 9 you do have an option to either import .swf or .mp4 files. See the image below to import these two formats in presenter:
Regards,
Mayank -
Is the left-hand Home screen reserved for TV and movies?
As familiar as I thought I was with Android (via my phones) I thought I would've figure out by now how to get this screen back for other uses. But so far no luck. Is 1//3 of my available Home screen space really reserved for TV and Movies (and, at that, apparently only the ones downloaded from Google Play)?
Ann154,
Bingo! You were absolutely right! And now that widget is gone.
Unfortunately, so is the screen it was occupying. Now, instead of three screens I have but two - - the original center screen and the one that had previously been the right-hand screen.
Which prompts the question of how and where pages are added or deleted from the home screens.
Sent from myMail app for Android
Sunday, 28 December 2014, 09:05AM -07:00 from Ann154 <[email protected]>:
A message from the Verizon Wireless Community
Is the left-hand Home screen reserved for TV and movies? created by Ann154 in Verizon Ellipsis 8 - View the full discussion -
Cancellation of Mat Document for Return delivery mov 161(Here Mov Type 922)
Hi SAP Support,
Myself got an issue relevent to Wrong MIGO. User due to wrong concept did MIGO where Movement type was 922 though its return PO (Means Return PO
is ticked - Mov type 161).
Explanation : At the time of MIGO , default movement type was 101, so automatically it should pick 161 at the time of Good Received.
But here when the user open the MIGO Screen, last movement type was showing i.e. 901. And user did MIGO where it changed automatically to 922.
Now when I cancelled the document, flow was :
a. 5000147271 - 922
b. 5000151684 - 161
c. 5000151730 - 162
d. 5000152339 - 161
Which is wrong as per my perception and i.e. why not maching the same.
But while doing the Same in Quality Server with the Same Documents (Just refreshed 2 days back), flow is
a. 5000147271 - 922
b. 5000151684 - 123
c.s 5000151730 - 161
Which is perfect one. And this should be the results. Now my reuirment that how could I do managed the same way in Production. Please help me.
Regards,
PinkuHi,
Can you please explain as to what this "9" series movement type represent.Is the movement type "922" a copy of the movement type "122" ?
Kindly make a note that the reversal movement types are determined from the configuration for "Copy ,Change Movement types" T code - OMJJ. Here select any movement type & click on "Reversal/follow-on movement types" for which you want to know the reversal movement type. Hope this gives you an idea for resolving the issue.
Regards
Swapnil -
I am trying to reorganise my apps on my iphone via the new itunes software, you don't seem to be able to move one app at a time to a different screen, just move the screens around, what am I doing wrong
Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself. -
How do I change the image selected for the finalized movies pane in all events?
How do I change the image selected for the finalized movies pane in all events? I made a movie some time ago in iMovie, and a still from this now appears as the image for Finalized Movies in the All Events pane (as well as showing up if I then click on this pane to take me to Finalized Movies). Anyone know how to change or delete this image, please?
Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies. That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
The suggested solution is:
First, I found I had "img100.png" in C:\Windows\Web\Screen and
C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
which I permanently deleted.
However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All. I edit it with mspaint and then try to save it. The save starts that then says the
save was interrupted.
The appears to be some additional protection besides the standard acls.
http://www.saberman.com -
Black Preview Screen on Movie Maker on my HP Pavilon dv7-6175us, can someone help me , thanks
Back Preview Screen on Movie Maker on my HP Pavilon dv7-6175us, was working before , now it is not working, can someone help me , thanks
@Greg57 ,
Hello and thank you for posting on the HP support forums. So that I can provide you with the best possible assistance here I am going to need a little more information.
So you say Movie Maker give you a black screen on play back.
First here is a link I would like you to go to and check out. Please post back with as much information as you can. Do not post your serial number.
Advice for asking the "Very Best Question"
Other things you can post back with is.
1) What type of file are you trying to play back. ( .avi, .mpg, wmv, .ogv.)
2) Have you used other media players that have built in codecs to play different video types.
( VLC media play it is free to download. Quicktime from apple. Windows Media player. Realplayer.)
3) Have you saved this file and tried to play it on other systems. If it plays black on other computers then you have a corrupt video file.
Please try a few things and let me know what you tried to do to solve this issue.
Resolve common Video Playback problems and issues on Windows 7
Do other videos have problems on your system. If yes you could have an issue with the notebook. If no you are looking at a software issue or an actual issue with the file itself.
Hope to hear back from you soon.
When you post back could you provide key system information as well. What is your product number and what Version of Operating System are you running. For example Is it Windows 7 home or pro or ultimate. What updates or service packs have been installed.
Here are some links for you that should help.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Thank you so much for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
Question regarding the date in MARC for a daily movement report
Hi,
I have a requirement, where i need to create a report, based on the selection screen parameters for <u>purchasing group</u> and <u>date</u> (the default is 1 minus the current date.)
The report is used to view the daily movement, relating to the selected purchasing group and date.
Where and how do i find entries for that specific date? What tables and field or fields do i use?
Points will be rewarded and all help will be greatly appreciated.
Thank You,
JohnSee the below example code :
REPORT ZQA_MOVEMENT_ANALYSIS no standard page heading.
*>>> ELEMENTS COPIED FROM REPORT BALVHT01 .
ALV
TYPE-POOLS: SLIS.
Includes
INCLUDE .
tables: mkpf, mseg, marc, mara, makt, mard.
DATA =============================================================== *
DATA: G_BOXNAM TYPE SLIS_FIELDNAME VALUE 'BOX',
G_EXPANDNAME TYPE SLIS_FIELDNAME VALUE 'EXPAND',
P_F2CODE LIKE SY-UCOMM VALUE '&ETA',
P_LIGNAM TYPE SLIS_FIELDNAME VALUE 'LIGHTS',
G_SAVE(1) TYPE C,
G_TABNAME_HEADER TYPE SLIS_TABNAME,
G_TABNAME_ITEM TYPE SLIS_TABNAME,
g_default(1) type c,
G_EXIT(1) TYPE C,
GX_VARIANT LIKE DISVARIANT,
G_VARIANT LIKE DISVARIANT.
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
GC_FORMNAME_ITEM_EXPAND TYPE SLIS_FORMNAME VALUE 'ITEM_EXPAND',
GC_FORMNAME_user_command type slis_formname value slis_ev_user_command.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GS_KEYINFO TYPE SLIS_KEYINFO_ALV,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GT_EVENTS TYPE SLIS_T_EVENT.
DATA: G_REPID LIKE SY-REPID.
DATA: GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
data: begin of i_movement occurs 0,
matnr like mseg-matnr,
bwart like mseg-bwart,
budat like mkpf-budat,
mblnr like mseg-mblnr,
gjahr like mseg-gjahr,
shkzg like mseg-shkzg,
menge like mseg-menge,
meins like mseg-meins,
end of i_movement.
data: begin of i_mat occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
labst like mard-labst,
meins like mara-meins,
end of i_mat.
data: begin of i_output occurs 0.
include structure ZFD_MOVEMENT_ANALYSIS.
data: end of i_output.
data i_popuptext like popuptext occurs 2 with header line.
data: v_matnr like mara-matnr.
data: x_movement like i_movement.
SELECTION-SCREEN --------------------------------------------------- *
SELECTION-SCREEN BEGIN OF BLOCK period WITH FRAME TITLE text-001.
select-options: so_budat for mkpf-budat obligatory no-extension.
SELECTION-SCREEN END OF BLOCK period.
SELECTION-SCREEN BEGIN OF BLOCK org WITH FRAME TITLE text-002.
parameters: p_werks like marc-werks obligatory default '1000',
p_lgort like mard-lgort obligatory default '1000'.
select-options: so_matnr for mseg-matnr,
so_dept for marc-zzdept,
so_kostl for mseg-kostl,
so_ekgrp for marc-ekgrp.
SELECTION-SCREEN END OF BLOCK org.
SELECTION-SCREEN SKIP 1.
Variant
SELECTION-SCREEN BEGIN OF BLOCK 0 WITH FRAME TITLE TEXT-P01.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK 0.
INITITALIZATION ==================================================== *
INITIALIZATION.
G_REPID = SY-REPID.
G_TABNAME_ITEM = 'I_OUTPUT'.
define keyinfo
CLEAR GS_KEYINFO.
GS_KEYINFO-ITEM01 = 'MATNR'.
PERFORM E01_FIELDCAT_INIT USING GT_FIELDCAT[].
PERFORM E03_EVENTTAB_BUILD USING GT_EVENTS[].
PERFORM E04_COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
PERFORM E06_T_SORT_BUILD USING GT_SORT[].
PERFORM E07_SP_GROUP_BUILD USING GT_SP_GROUP[].
Set Options: save variants userspecific or general
G_SAVE = 'A'.
PERFORM VARIANT_INIT.
Get default variant
GX_VARIANT = G_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = G_SAVE
CHANGING
CS_VARIANT = GX_VARIANT
EXCEPTIONS
NOT_FOUND = 2.
IF SY-SUBRC = 0.
P_VARI = GX_VARIANT-VARIANT.
ENDIF.
AT SELECTION-SCREEN ================================================ *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
PAI
AT SELECTION-SCREEN.
PERFORM PAI_OF_SELECTION_SCREEN.
START-OF-SELECTION ================================================= *
start-of-selection.
perform check_background_processing.
PERFORM E05_LAYOUT_BUILD USING GS_LAYOUT. "wg. Parameters
perform get_data.
perform build_report.
perform write_report.
AT LINE SELECTION ================================================== *
at line-selection.
if sy-lsind = 1.
format intensified off.
if not i_output-matnr is initial.
v_matnr = i_output-matnr.
loop at i_movement where matnr = i_output-matnr.
write: / i_movement-mblnr hotspot on,
i_movement-bwart,
i_movement-budat,
i_movement-shkzg.
if i_movement-shkzg = 'H'.
format color col_negative.
else.
format color col_positive.
endif.
write: i_movement-menge,
i_movement-meins.
format color off.
hide: i_movement-mblnr, i_movement-gjahr.
endloop.
clear i_movement.
endif.
elseif sy-lsind = 2.
set parameter id 'MBN' field i_movement-mblnr.
set parameter id 'MJA' field i_movement-gjahr.
call transaction 'MB03' and skip first screen.
endif.
==================================================================== *
top-of-page.
perform top_of_page.
top-of-page during line-selection.
read table i_mat with key matnr = i_output-matnr.
write: i_output-matnr,
i_mat-maktx,
so_budat-low, ' to ', so_budat-high.
uline.
clear: i_mat, i_output.
*& Form write_report
text
--> p1 text
<-- p2 text
FORM write_report.
Call ABAP/4 List Viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT = gs_layout
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS = gt_sp_group[]
IT_SORT = gt_sort[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = g_save
IS_VARIANT = g_variant
IT_EVENTS = gt_events[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_output
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " write_report
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data.
if so_dept[] is initial and
so_matnr[] is initial and
so_kostl[] is initial and
so_ekgrp[] is initial.
i_popuptext-text = 'Please choose a department, material number,'.
append i_popuptext.
i_popuptext-text = 'cost center or purchasing group'.
append i_popuptext.
CALL FUNCTION 'DD_POPUP_WITH_INFOTEXT'
EXPORTING
TITEL = 'Please Note'
START_COLUMN = 1
START_ROW = 1
END_COLUMN = 5
END_ROW = 3
INFOFLAG = ' '
IMPORTING
ANSWER =
TABLES
LINES = i_popuptext.
Stop execution until user enters a purch group or dept.
stop.
endif.
get all materials matching selection criteria - exclude finished
materials
select kmatnr kmaktx labst meins
from ( ( ( marc as c inner join makt as k
on cmatnr = kmatnr ) INNER JOIN mard as d
on cmatnr = dmatnr ) INNER JOIN mara as a
on cmatnr = amatnr )
into table i_mat
where c~matnr in so_matnr and
c~ekgrp in so_ekgrp and
c~zzdept in so_dept and
c~werks = p_werks and
d~werks = p_werks and
k~spras = 'E' and
d~lgort = p_lgort
order by k~matnr.
if sy-subrc = 0.
read table so_budat index 1.
loop at i_mat.
get all material movements for all materials identified since
start date on date interval selected by user
select matnr bwart budat bmblnr bgjahr shkzg menge meins
appending table i_movement
from ( mseg as b INNER JOIN mkpf as a
ON bmblnr = amblnr AND
bmjahr = amjahr )
where b~matnr = i_mat-matnr and
a~budat >= so_budat-low.
endloop.
endif.
ENDFORM. " get_data
*& Form build_report
text
--> p1 text
<-- p2 text
FORM build_report.
data: x_movement like i_movement,
v_processed_inv like mseg-menge.
sort i_movement by matnr ascending
budat descending.
loop at i_movement.
if movement after end of period specified, use movement to work
backwards to inventory at end of selected period end date
if i_movement-budat > so_budat-high.
if i_movement-shkzg = 'H'.
add i_movement-menge to i_output-ending_inv.
else.
subtract i_movement-menge from i_output-ending_inv.
endif.
endif.
compute inventory at beginning of period
if i_movement-shkzg = 'H'.
add i_movement-menge to i_output-begin_inv.
else.
subtract i_movement-menge from i_output-begin_inv.
endif.
if movement in the time period specified, summarize movements by
type
if i_movement-budat >= so_budat-low and
i_movement-budat <= so_budat-high.
if i_movement-bwart+0(1) = '1'.
if i_movement-shkzg = 'S'.
add i_movement-menge to i_output-purchased_inv.
else.
subtract i_movement-menge from i_output-purchased_inv.
endif.
elseif i_movement-bwart+0(1) = '2'.
if i_movement-shkzg = 'S'.
add i_movement-menge to i_output-transferred_inv.
else.
subtract i_movement-menge from i_output-transferred_inv.
endif.
elseif i_movement-bwart+0(1) = '4'.
if i_movement-shkzg = 'S'.
add i_movement-menge to i_output-transferred_inv.
else.
subtract i_movement-menge from i_output-transferred_inv.
endif.
elseif i_movement-bwart+0(2) = '55'.
if i_movement-shkzg = 'S'.
add i_movement-menge to i_output-scrapped_inv.
else.
subtract i_movement-menge from i_output-scrapped_inv.
endif.
elseif i_movement-bwart+0(1) = '6'.
if i_movement-shkzg = 'S'.
add i_movement-menge to i_output-sold_inv.
else.
subtract i_movement-menge from i_output-sold_inv.
endif.
elseif i_movement-bwart+0(1) = '7'.
if i_movement-shkzg = 'S'.
add i_movement-menge to i_output-cycled_inv.
else.
subtract i_movement-menge from i_output-cycled_inv.
endif.
elseif i_movement-bwart+0(2) = '96'.
if i_movement-shkzg = 'S'.
add i_movement-menge to i_output-recovered_inv.
else.
subtract i_movement-menge from i_output-recovered_inv.
endif.
else.
if i_movement-shkzg = 'S'.
add i_movement-menge to i_output-other.
else.
subtract i_movement-menge from i_output-other.
endif.
endif.
endif.
Summarize data for material number and add to output list
x_movement = i_movement.
at end of matnr.
clear i_mat.
read table i_mat with key matnr = i_movement-matnr.
i_output-maktx = i_mat-maktx.
inventory at end of period = current inventory + changes since end
of period
add i_mat-labst to i_output-ending_inv.
inventory at begin of period = ending inventory + changes in
interval
add i_mat-labst to i_output-begin_inv.
build percentages for types of movements in period - the only
reason this data needs to be stored rather than computed on the
fly is for sorting of data
v_processed_inv = ( i_output-begin_inv - i_output-ending_inv )
+ i_output-purchased_inv.
if v_processed_inv <> 0.
i_output-percent_sold =
( i_output-sold_inv / v_processed_inv ) * 100 * -1.
i_output-percent_scrapped =
( i_output-scrapped_inv / v_processed_inv ) * 100 * -1.
i_output-percent_transferred =
( i_output-transferred_inv / v_processed_inv ) * 100 * -1.
i_output-percent_cycled =
( i_output-cycled_inv / v_processed_inv ) * 100 * -1.
i_output-percent_recov =
( i_output-recovered_inv / v_processed_inv ) * 100 * -1.
i_output-other =
( i_output-other / v_processed_inv ) * 100 * -1.
endif.
record material number
move i_movement-matnr to i_output-matnr.
i_output-meins = x_movement-meins.
append i_output.
clear i_output.
endat.
endloop.
clear i_movement.
ENDFORM. " build_report
FORM E01_FIELDCAT_INIT *
--> E01_LT_FIELDCAT *
FORM E01_FIELDCAT_INIT USING E01_LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME =
I_INTERNAL_TABNAME = G_TABNAME_ITEM
I_STRUCTURE_NAME = 'ZFD_MOVEMENT_ANALYSIS'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER = 'X'
CHANGING
CT_FIELDCAT = E01_LT_FIELDCAT[].
ENDFORM.
FORM E03_EVENTTAB_BUILD *
--> E03_LT_EVENTS *
FORM E03_EVENTTAB_BUILD USING E03_LT_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 1
IMPORTING
ET_EVENTS = E03_LT_EVENTS.
tell program which form to call for top of page event
READ TABLE E03_LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO E03_LT_EVENTS.
ENDIF.
tell program which form to call for item expand event
READ TABLE E03_LT_EVENTS WITH KEY NAME = slis_ev_item_data_expand
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_ITEM_EXPAND TO LS_EVENT-FORM.
APPEND LS_EVENT TO E03_LT_EVENTS.
ENDIF.
ENDFORM.
FORM E04_COMMENT_BUILD *
--> E04_LT_TOP_OF_PAGE *
FORM E04_COMMENT_BUILD USING E04_LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER.
Listenüberschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
write sy-datum to LS_LINE-INFO.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'FreshDirect Product Reorder Report'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = TEXT-050.
LS_LINE-INFO = TEXT-010.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
LS_LINE-KEY = TEXT-051.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
Aktionsinfo: Typ A
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
LS_LINE-KEY: not used for this type
LS_LINE-INFO = TEXT-002.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
ENDFORM.
FORM E05_LAYOUT_BUILD *
<-> E05_LS_LAYOUT *
FORM E05_LAYOUT_BUILD USING E05_LS_LAYOUT TYPE SLIS_LAYOUT_ALV.
E05_LS_LAYOUT-F2CODE = P_F2CODE.
E05_LS_LAYOUT-ZEBRA = 'X'.
E05_LS_LAYOUT-colwidth_optimize = 'X'.
ENDFORM.
FORM E06_T_SORT_BUILD *
--> E06_LT_SORT *
FORM E06_T_SORT_BUILD USING E06_LT_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR LS_SORT.
LS_SORT-FIELDNAME = 'MATNR'.
LS_SORT-TABNAME = G_TABNAME_ITEM.
LS_SORT-SPOS = 1.
LS_SORT-UP = 'X'.
APPEND LS_SORT TO E06_LT_SORT.
ENDFORM.
FORM E07_SP_GROUP_BUILD *
--> E07_LT_SP_GROUP *
FORM E07_SP_GROUP_BUILD USING E07_LT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV.
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT = TEXT-005.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
ENDFORM.
FORM TOP_OF_PAGE *
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
data v_repid like sy-repid.
write: / sy-datum, sy-uzeit,
100 'FreshDirect Material Movement Type Analysis Report'.
show parameters chosen on selection screen in header
v_repid = sy-repid.
CALL FUNCTION 'Z_WRITE_SELECTION_SCREEN'
EXPORTING
REPID = v_repid
EXCEPTIONS
REPORT_NOT_FOUND = 1
OTHERS = 2.
write column headings
format color col_heading.
write: /(18) 'Material #',
(40) 'Description',
(16) ' Beginning Inv.',
(16) ' Purchased',
(16) ' Available Inv.',
(16) ' Ending Inv.',
(16) ' Processed Inv.',
(25) ' Sold',
(25) ' Scrapped',
(25) ' Transferred',
(25) ' Cycle Counted',
(25) ' Other'.
format color off.
uline /1(278).
ENDFORM.
FORM F4_FOR_VARIANT *
FORM F4_FOR_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
IS_VARIANT = G_VARIANT
I_SAVE = G_SAVE
I_TABNAME_HEADER = G_TABNAME_HEADER
I_TABNAME_ITEM = G_TABNAME_ITEM
it_default_fieldcat =
IMPORTING
E_EXIT = G_EXIT
ES_VARIANT = GX_VARIANT
EXCEPTIONS
NOT_FOUND = 2.
IF SY-SUBRC = 2.
MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF G_EXIT = SPACE.
P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDIF.
ENDFORM.
*& Form PAI_OF_SELECTION_SCREEN
text
FORM PAI_OF_SELECTION_SCREEN.
IF NOT P_VARI IS INITIAL.
MOVE G_VARIANT TO GX_VARIANT.
MOVE P_VARI TO GX_VARIANT-VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
I_SAVE = G_SAVE
CHANGING
CS_VARIANT = GX_VARIANT.
G_VARIANT = GX_VARIANT.
ELSE.
PERFORM VARIANT_INIT.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
*& Form VARIANT_INIT
text
--> p1 text
<-- p2 text
FORM VARIANT_INIT.
CLEAR G_VARIANT.
G_VARIANT-REPORT = G_REPID.
ENDFORM. " VARIANT_INIT
INCLUDE ZQA_UTILITY_INCLUDE.
***INCLUDE ZQA_UTILITY_INCLUDE .
*& Form display_popup_message
text
--> p1 text
<-- p2 text
form display_popup_message using x_text1
x_text2.
data: int_popuptext like popuptext occurs 2 with header line.
int_popuptext-text = x_text1.
append int_popuptext.
int_popuptext-text = x_text2.
append int_popuptext.
call function 'DD_POPUP_WITH_INFOTEXT'
exporting
titel = 'Please Note'
start_column = 1
start_row = 1
end_column = 5
end_row = 3
tables
lines = int_popuptext.
endform. " display_popup_message
*& Form upload_data_file
text
-->P_int_INPUTDATA text
form upload_data_file tables x_inputdata
using x_filename like rlgrap-filename.
clear x_inputdata.
refresh x_inputdata.
file on UNIX app server
if x_filename+0(1) = '/'.
open dataset x_filename for input.
if sy-subrc <> 0.
perform display_popup_message using 'Error opening file'
x_filename.
stop.
else.
do.
read dataset x_filename into x_inputdata.
if sy-subrc <> 0.
exit.
endif.
append x_inputdata.
clear x_inputdata.
enddo.
endif.
close dataset x_filename.
else.
file on local PC of GUI
call function 'UPLOAD'
exporting
filename = x_filename
filetype = 'ASC'
tables
data_tab = x_inputdata
exceptions
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
guint_refuse_filetransfer = 6
others = 7
if sy-subrc <> 0.
perform display_popup_message using 'Error opening file'
x_filename.
stop.
endif.
endif.
endform. " upload_data_file
*& Form check_background_processing
text
--> p1 text
<-- p2 text
form check_background_processing.
endform. " check_background_processing
Reward Points if it is helpful
Thanks
Seshu -
Best Program for editing quicktime movies
What is the best program for editing quicktime movies.
For example, I have several quicktime movies in the 4:3 aspect ratio, but the video is ment to be 16:9 so there is black on the top and bottom. I want to be able to crop out the black and make the video file a true 16:9 wide screen video becuase my laptop has a widescreen 16:10 aspect ratio lcd. And when playing back these videos, you end up with a couple inches of black on the top and bottom, and right and left, so a lot of screen space get's waisted. The only programs I have found so far that can make a 16:9 quicktime video have not supported the H.264 format, and only stetch the video to 16:9 rather then croping it, so the black remains on the top and bottom and the aspect ratio is off and every one looks short and fat becuase it's not in its native aspect ratio correctly.
Does anyone have any advice on what program I should use?
Also, does anyone have any recomendatiosn for how to convert wmv files to quicktime / itunes videos? I have found one program that does so, but it comes out very blocky and the audio is out of sync with the video by a good five seconds.
ThanksMPEG Streamclip (free) can crop and Save As so you wouldn't need to add any new compression to the existing files.
The make a Windows version now (it used to be Mac only).
No tips on converting WMP files but you'll find dozens of solutions in the iPod Discussions pages. -
When I try to work in a second desktop, a program cannot be used if already open in the first desktop. The screen just moves back to the first desktop. Anybody else have this issue?
Whether or not this behavior occurs depends upon various preference settings and upon how you try to access the application in question. Personally, I like to organize my desktops according to project, so I regularly have windows from the same application spread out over several desktops. No problem.
For example, I have a Safari window in Desktop 1 and I want a Safari window in desktop 2. If, while in desktop 2, I bring Safari to the front by clicking on the Dock icon, I can open a new window in the usual ways. I could also just control-click on the Safari icon in the dock to get a new window in desktop 2.
(The only application that is a little weird in this regard is Finder. You have to do the control-click on it or it will always switch to a space with a window open.)
To make all this occur, I have Safari assigned to no desktops (control-click on Safari icon, then on Options) and in Mission Control preferences (in System Preferences) I have "When switching to an application..." UNchecked.
(Note that, with these settings, if an application is already in front and you click on its icon - or click twice on the icon if the applcation is not in front - the OS will assume you are looking for another open window and will switch spaces to give you one.)
Hope this helps.
charlie -
What is the best software to use for screen capture on a PC for use with FCPX?
What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.
I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck -
No batch input data for screen SAPMF02K 0310 in PROD but ok in DEV & QAS
Hi gurus,
I created an LSMW recording for vendors but now I am having erros when uploading to PROD. The error No batch input data for screen SAPMF02K 0310 appears. The strange thing is that it works perfectly in DEV and QAS.
What would cause this? Would there be a problem with the config?
Edited by: obie villamosa on Sep 9, 2010 7:35 PMHowdy,
As an example, your recording may work perfectly for a vendor that has not been extended to any purchasing orgs - and so it tests fine in Dev and QAS.
But when you move to Production your recording may fail against a vendor that has been extended to a purchasing org.
Just one example. I notice 0310 is the screen for Vendor purchasing org data, so maybe this is what's happening here.
Cheers
Alex -
No batch input data for screen SAPMSSY0 0120 error while running LSMW
I created Batch Input Recording for custom check register screen. I completed all the necessary steps but when I process the batch input session, my upload fails and gives me the following error:
No batch input data for screen SAPMSSY0 0120
I ran the Batch input in foreground to see what data am I missing and found out that one of the screen required a "DOUBLE CLICK" as user input and seems that LSMW is not able to process the "DOUBLE CLICK" (even though Batch Input recording captured the "DOUBLE CLICK") to move forward with the transaction.
Does anyone one know How can I overcome this issue or any other workaround.
Thanks NirankarHi Chetan,
List screens utilize SAPMSSY0/0120. Please check within your ABAP coding if you have any customer exit that tries to issue WRITE statements. If so, either remove them or add logic to not issue them in background (e.g. SY-BATCH = 'X'). Another culprit might be a SUBMIT statement in a user exit, which triggers a report with list output. I'm not completely sure, but I think the screen is also used for some value helps (do you have any coding forcing a value help popup?).
Hope this helps, harald -
I was billed for a rented movie that never completely down loaded and I never was able to view. How do I get reimbursed???
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
Maybe you are looking for
-
Changing to a different counter card yields no results
Hello, I'm very new to Labview and so I was hoping that I might be able to get some help here. I've inherited a project and a lot of labview code, and as I piece through it I'm updating it, cleaning it up, and trying to modify it for new testing new
-
FCE (and others) quit unexpectedly
I'm in the process of moving from a G5 iMac to a new Intel iMac. I've used Migration Assistant to move files. Most programs seem to be operating normally. However I can't start Final Cut Express, Soundtrack or LiveType. I get "Final Cut Express HD (o
-
Entourage Crashing and won't start
Upgraded to 10.4.10, Safari 3 beta etc. Now Entourage won't start. Splash screen comes up then unexpectedly quits. Tried reinstalling the 10.4.10 combo update. No good. I have tried to reinstall the MS Office update and now that won't even start - it
-
New idea for Playbook 4G (16+) :D
Hi everyone! Suddently I have a new I dea for the next tablet. So I want to share to you. Ps: I'm 100% male, but the cover just only have blue color.. Hope RIM should have many color for the cover... I love BB Fashion!!! Have a nice day!
-
IOS app rejected: Adobe make it work on iOS7!
Adobe... Please make Director iOS app work on iOS 7. Period.