Lab Setup and Demo Licenses

I just set up a Call Manager on a VmWare server for a lab. My license server is started, and all services are activated and look great. My only issue is when I try to add a Cisco IP phone, it will not actually add the end point device. Do I have to get trial licenses to do this or am I just missing something?

Until 9.0(1) the system has a built-in 150 DLU/3 node demo license that gets used if you haven't uploaded any licenses. You can check System > Licensing > Report to see what it looks like. Note that the demo license does not include a SW Feature license so you will not be able to upgrade to 8.0 or newer.
If the demo license is intact and shows unallocated DLUs then your inability to add things suggests a database problem. Be sure that Informix is started and healthy.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

CUCM Licensing/ordering and demo licenses

Hello,
I am trying to setup a lab with CUCM and trying to figure out the process to place an order for CUCM. I know that you need DLU licneses for each phone, however do I need to buy a base license in addition to that? How does it work?
Also, does CUCM come with a demo license which I can use for my lab without ordering any additional licenses??
What are my options?
I alos tried to search the part/product numbers for CUCM ordering but was not able to find them on Cisco site. I am interested in buying CUCM 7.x.
Thank you.

Hi there,
The Part# you would be looking for is;
CM7.1-K9-LAB
SW Unified CM 7.1 Appliance, 100 DLUs, Lab System Only
This comes with licensing for 2 Nodes, Software (DVD's) and 100 DLU's which
is good for approx. 20 phones I believe the End of Sale for this is June of this year.
Cheers!
Rob
"Everything is broken" - Bob Dylan

In-house test and demo license

Some integration tests such as CA-DMI, BC-XOM, BC-SNC,etc. can not be performed via remote-access DPA systems. To overcome this problem, vendors can install SAP software on thier own sites, by purchasing a Test&Demo license.
Here is the information for Test&Demo license:
IDES Test & Demo License
It has never been easier to discover and demonstrate the world of mySAP Business Suite e-business solutions than with the Internet Demonstration and Evaluation System (IDES) with its preconfigured installation of mySAP Business Suite components, populated with the data and business processes of a fictional enterprise. This model corporation consists of several companies located around the globe with clearly defined and independent business tasks.
Interfaces, suitable for testing: AC-CCI, BC-CTS, BC-SNC, BC-SSF, BC-LDAP-USR, CA-DMI, CA-EDI, EP-IVW, FI-EDI, HR-OCI, IS-ADP, IS-B-DCH, IS-ITA, IS-T-EBC, IS-TAS, IS-TPS, IS-U-WM
Requirements: PC with moderate power and server operating system together with trained administrator to install and run SAP system.
How to obtain: In EMEAyou can order the Test & Demo License from the Software Partner Program (mailto:[email protected]). In the Americas, please contact SAP America at mailto:[email protected]

Hello Veeren,
Hope this helps:
Q. How to obtain access ?
Just contact the ICC guys <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc">http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc</a> and they will help you out with this. We had a lovely experience with the consultants for our XI Content Certification.
Q. How long does this process take ?
In our case, it was less than a week.
Q. What's the cost ?
We were fortunate to do it during the promotional period and did not have to pay anything. The ICC consultant would help you with the details.
Q. How well does the system work ?
The system was quite fast and the access is via ITS / SAP GUI for HTML.
Q. Do you get access to only the built-in data or you can create your own ?
Besides the XI Server, it was an IDES system in our case and we were also able to create data.
All the best for your certification.
Regards,
Parag.

I purchased a new Lab top and try to install my CS4 software again. I get this message:Setup has encounter an error and cannot continue.

I purchased a new Lab top and try to install my CS4 software again. I get this message:Setup has encounter an error and cannot continue

Have a look at this: Re: CS4 Installation on Windows 8.1 Setup error
Basically install CS4 from a new Admin account.
Gene

WebTools Demo License installed and now sap clients can't connect.

Hi,
I have installed a WebTools Demo License on the SAP/SQL Server. Now, SAP Clients from the other computers cann't connect to SAP, the error is:
Connection Failed:
SQL State: 08001
SQL Server Error: 233
Best Regards,
Kafil Shumon.

Hi Bryce,
Thanks very much for the reply. Somehow windows firewall got enabled and that's why we were not able to connect.
Now, I have already installed the "Demo WebTools License" for testing at the customer site. Now, how do I go back to the Initial "License Request" page so that a "test server license" can be requested?
Thanks,
Kafil Shumon.

Vision demo :: design flow setup and person hierarchies.

Hi Folks
I am on the look out for the
Demo/pre-sales document of Vision Demo database which talks about the setups and default flows of Vision Corporation
This is the demo 11i database
regards
Sunil Choudhary

Hi Folks
I am on the look out for the
Demo/pre-sales document of Vision Demo database which talks about the setups and default flows of Vision Corporation
This is the demo 11i database
regards
Sunil Choudhary

Lab setup- 2911/CME, aironet AP, and 7926

I need to setup a lab for testing / demo 2 7926 phones to call each other.
Do you have a simple sample CME config to accomplish this (ie, ephone command, realtive show commands to prove it connected or not)?
Can I plug my AP directly into the ethernet port on the 2911? If not will any switch do?
Also, there will be a VMXL server added later, where does this get connected physically?
Let me know on this sample config what else I would need to setup the phones. Thanks so much.

You have to plug your AP to PoE switch port configured as trunk port (assuming multiple vlan trunk to wireless network) if you are using it standalone mode (without WLC). If your switch is not POE then you need power injector to power the AP.
Then you have to configure necessary SSIDs to phones to join via wirelessly & register to your CME. In DHCP scope for the phones you need to provide option 150 which is CME IP address.
Do not know about VMXL server connetion.
HTH
Rasika

Cisco UCCX 9.0.2.10000-71 - Demo License Issues

Hello Cisco Support,
I have installed Cisco Unified Contact Express 9.0.2.10000-71 on a Cisco UCS C220 M3 Server and have used the demo license that comes with the ISO Image on the server. After install, I have used the Premium Demo License. I have integrated UCCX 9.0 with CUCM 8.6(2) SU2.
I can say that everything worked fine until I wanted to test the Cisco Agent Desktop (CAD), Cisco Supervisor Desktop (CSD) and Cisco Agent IP Phone Service.
I am pretty much sure that the configuration on either the CUCM, UCCX is set up correctly but I might miss something.
When I tried to fire up the CAD or CSD, I am getting the following error message: "A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log files or System Administrator for details". then followed by License Server is down.
I have also setup Agent IP Phone Service on the CUCM and each time I select the Service on the IP Phone, an error stating that could not connect to the IP Phone Agent Service.
Below is the information for my setup:
admin:show uccx version
Active UCCX Version: 9.0.2.10000-71
Inactive UCCX Version: NA
admin:show uccx license
Configured Licenses:
Package: Cisco Unified CCX Premium
IVR Port(s): 50
Cisco Unified CCX Premium Seat(s): 25
High Availability : Enabled
Cisco Unified CCX Preview Outbound Dialer: Enabled
Cisco Unified CCX Quality Manager Seat(s): 25
Cisco Unified CCX Advanced Quality Manager Seat(s): 25
Cisco Unified CCX Workforce Manager Seat(s): 25
Cisco Unified CCX Compliance Recording Seat(s): 50
Cisco Unified CCX Maximum Agents: 400
Cisco Unified CCX Licensed Outbound IVR Port(s): 25
For dynamic content like the Inbound ports in use and Outbound ports available and in use please check using the Cisco Unified CCX Administration.
Command successful.
Could you please help me out figure out what could be the cause of me failing to log onto the CAD/CSD and also IP Phone Agent Service?
Warm regards,
JK.

Hello Aman,
Thanks for the link.
How do I go about turning off the the SYN Flood Detection Mode state in Option 2 on the UCCX Server.
Option 2: Turn off SYN Flood detection mode. Risk: Leaves the server open to SYN Flood.
I have checked and my Windows XP SP3 computer where Cisco Agent Desktop is installed has Windows Firewall set to off at the moment.
Warm regards,
JK.

Questions re: GPIB-ENET, LabView 5 and 7, license and Win XP

We have a full development version of LabView 5.0 on a Win 98 SE machine, and just acquired a GPIB-ENET box that came with Solaris drivers. I loaded the GPIB and VISA software on LabView 5.0 and tried to connect to test the setup to no avail. It appears that all of the drivers are present. I believe that my problem is that I can�t get the IPAssign network driver bound to the 3Com ethernet card. When I load it in network properties, it doesn�t offer any hardware to bind to it. If I run IPAssign anyway, it claims the only networking hardware available is dialup, and sits forever (probably waiting to connect to a dialup line).
The ultimate plan is to upgrade to LabView 7, and install it with the GPIB-EN
ET box on a Win XP system. I have a demo version of 6.1, so I loaded that on the XP machine and tried again. LabView 6.1 appears to be missing drivers for GPIB-ENET, and looking through the knowledge base tells me a driver bug leaves Win XP incapable of assigning an IP address to GPIB-ENET anyway.
My questions are:
1. Should it be possible to get LabView 5.0 with 98SE talking to the older GPIB-ENET box, at least to set the IP address? Is this failing because I need to download the license (p/n 778258-02)?
2. If I order LabView 7 and install it on Win XP, will I still need to download the license to run it, or is that included in version 7?
3. Once I get LabView 7 and the driver and the license (if necessary) will I be able to assign the IP address with this setup?
4. If the answer to #1 is �yes, with a license� and to #3 is �no�, then can I download the license, use it to assign an IP address on LabView 5 and transfer it to LabView 7/ Win XP when I get it to use the GPIB-EN
ET box?
Thanks.

Hello,
Which version of the GPIB drivers are you using? We recommend using NI-488.2 v2.0 for your GPIB-ENET device (for Windows XP and Windows 98).
1. Should it be possible to get LabView 5.0 with 98SE talking to the older GPIB-ENET box, at least to set the IP address? Is this failing because I need to download the license (p/n 778258-02)?
A: If you have version 2.0 of the drivers, you should be able to assign the IP okay. Do you see a pattern in the LEDs flashing? Check the READY LED and see if you see a pattern, as this indicates an error code. The following formula can be used to find the error code:
error code= (long flashes-1)(short flashes-1)example: 3 long flashes, and 9 short flashes = (3-1)(9-1) = 28
If the READY LED does not stop flashing, it indicates that the GPIB-ENET does not have a valid IP address assigned to it. According to this KB:
The problem is the Ethernet address. The field for the Ethernet address in the IPAssign Utility is meant for the last four digits of the Ethernet address on your GPIB-ENET (the first part of the address is the same for all GPIB-ENETs, so it is pre-filled for you). If you run the IPAssign Utility again and fill in the last four digits of your GPIB-ENET's Ethernet address (in the format: xx:xx), then you should be able to assign it an IP address successfully.
More details: The Receive LED flashes because the Ethernet header for the packet is correct and the GPIB-ENET recognizes that; However, the header was actually duplicated when you entered the Ethernet address in the IPAssign Utility, so it did not match the exact Ethernet address of that particular GPIB-ENET. The only numbers that need to be entered into the Ethernet address field in the IPAssign Utility are the last 4 numbers in the format: xx:xx.
Note: The user must decide what the IP address is going to be. Your IT department could probably help.The Ethernet Address however, is statically programmed into each ENET. It's usually labeled at the bottom of the unit.
Also, refer to this KB regarding some IP issues we've had with some of the older GPIB-ENET devices.
2. If I order LabView 7 and install it on Win XP, will I still need to download the license to run it, or is that included in version 7?
A: You should uninstall and reinstall NI-488.2 v2.0. If you already have this driver, you will not need to re-license it. The driver is not included with LabVIEW 7.0 by default.
3. Once I get LabView 7 and the driver and the license (if necessary) will I be able to assign the IP address with this setup?
A: You should be able to assign the IP fine. Look at the response for first question above to make sure you are assigning the IP correctly.
Anu Saha
Academic Product Marketing Engineer
National Instruments

Self-Serve Demo License website now available

To all Sales and Service Partners: A new self-service demo license page has been posted on the Channel Partner Portal Web tools landing page.
Check it out:
[http://service.sap.com/smb/sbo/webtools|http://service.sap.com/smb/sbo/webtools]
Click Licensing, the link is near the bottom under "Free Demonstration Self-Service License Request Page"
At this time it is only for partners and only for demo licenses. For customers and partners looking for production licenses, the process is the same as before, send the XML generated by the license request page on your local system (http://localhost/b1webtools/licenserequest.aspx) in an email to [email protected]
With a demo license you can setup a demo environment for Web tools on your laptop or workstation. Other users on the same network cannot view Web tools and you are limited to having only two concurrent sessions at one time.
Enjoy!

     Bug Report:
     System: Yoga Tablet Pro-1380F, Android Version 4.4.2, YT2-1380F_USR_S000219_1504281410_WW21_ROW
     After opening the previously installed Lenovo Companion App, 1.3.0.0215, it asked me if I wanted to upgrade to the latest version, 1.4.0.0518. I was interested in the 8 new diagnostic tools, so I did the update through the prompts. After I did the update, and rebooted, I launched the app. It "looked" OK, until I tried to run the diagnostics. The entire Companion App crashed.
     I then un-installed the app, and rebooted. I went to the Google Play Store, and searched for the Lenovo Companion app. I was surprised to see that "This app is not compatible for your device". To recover (get back to version 1.3.0.0215) I needed to download that version, using the link given in post # 6 by supersmp.
     Now, whenever I launch the app, it prompts me for the update, but at least the version 1.3.0.0215 diagnostic tools work.
     So, mostlyhuman, my advise is to wait until this bug is worked out. If you want the app, try the 1.3.0.0215 version in post # 6, above.
Cheers
DragonRider

Expressway-e demo license

Guys,
I am trying to run MRA in my lab and I am wondering how I can get a demo license for expressway-e and c demo licenses for the lab. Any ideas?

Dear Patrick,
is Demo licensing will work for calls outside the domain or organization. I mean if anyone have demo license for Expressway-C and E. is that work for B2B calls or B2C calls for limited period of time or it will be only within a domain ?
Thank you and Ragrads,
Umer Javed

WebCRM Demo license

Hi All,
I have setup WebCrm on a test server with a demo license just to see if I can get it all working. I know I have to access the site locally and not across a network but besides this restriction, will all other functionality within the product be available? For example I am having trouble viewing BP's though the web front-end.
Regards
Gareth
Edited by: Gareth Holley on May 19, 2009 4:23 PM

Yes all product functionality is available to anyone viewing the site on http://localhost/

Uccx demo license disappears after reboot

hi. im trying to install uccx 8.5 in vmware for lab purposes. when i install the demo license included in the DVD, it works out fine. however when i reload the VM and try to log back to uccx, it says that there is no license installed. when i try to reupload the demo license, it generates an error. can anyone help me with this?
thanks in advance.

What is the exact UCCX version?
If possible, share snapshot of error message.
regds,
aman

Does Cisco have any demo license for VCS?

For a study way, I would like to test VCS at my network for a while.
Does Cisco have any demo license for VCS?

Hi
I believe you get very limited (1x traversal/1x non traversal) licenses if you just install the software.
Also see this thread; you may get a time limited demo license from the licensing team if you ask nicely.
https://supportforums.cisco.com/discussion/11555961/home-lab-vcs-and-tms#3687717
Aaron

UCCX 8.51 demo license install issue

I have UCCX 8.51 installed on vmware workstation 7.1, and first try to install demo license and interrupted, and after that never success to logon the GUI, so no chance to install the demo license again. Any clue to solve this issue?
Thanks,

Hi,
License will come into picture when you are performing the UCCX initial app admin setup.
I hope you have installed the UCCX OVA template before installing the UCCX on the supported UCS server. Please cross verify the same from the below link,
http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX
Also check if the ip address of the UCCX is reachable, just to confirm no network issues.
Thanks,
Anand

Lab Setup and Demo Licenses

Similar Messages

Maybe you are looking for